Characteristic Steroids from the South China Sea Gorgonian Muricella sibogae and Their Cytotoxicities

Twenty‐four steroid‐based natural products, 9,10‐secosteroids ( 1 – 10 ), 1,4‐dien‐3‐one steroids ( 11 – 19 ), and 4‐en‐3‐one steroids ( 20 – 24 ), containing varying side‐chains, were isolated from the South China Sea gorgonian Muricella sibogae. The structures of one new 9,10‐secosteroid, sibogol D ( 1 ), and two new 1,4‐dien‐3‐one steroids, sibogols E and F ( 11 and 12 ), were elucidated by extensive spectroscopic analyses and by comparison with the literature data. Cytotoxicities for all the isolates were evaluated against four selected tumor cell lines, HL‐60, HCT116, K562, and P388. Compounds 3, 9 , and 13 exhibited potent cytotoxic activities against the HL‐60 cell line, with IC₅₀ values ranging from 1.27 to 10.05 μM , and compound 3 was also cytotoxic against HCT116 with an IC₅₀ value of 5.8 μM . The bioassay results also indicated a potential relationship between structural patterns and activity. The newly presented series of 1,4‐dien‐3‐one and 4‐en‐3‐one types of steroids relating to the unique 9,10‐secosteroids in biogenesis were found in this species for the first time, which is of considerable chemotaxonomic significance.     

A Fully Verified Theoretical Analysis of Contact‐Mode Triboelectric Nanogenerators as a Wearable Power Source

Harvesting mechanical energy from human activities by triboelectric nanogenerators (TENGs) is an effective approach for sustainable, maintenance‐free, and green power source for wireless, portable, and wearable electronics. A theoretical model for contact‐mode triboelectric nanogenerators based on the principles of charge conservation and zero loop‐voltage is illustrated. Explicit expressions for the output current, voltage, and power are presented for the TENGs with an external load of resistance. Experimental verification is conducted by using a laboratory‐fabricated contact‐mode TENG made from conducting fabric electrodes and polydimethylsiloxane/graphene oxide composite as the dielectric layer. Excellent agreements of the output voltage, current, and power are demonstrated between the theoretical and experimental results, without any adjustable parameters. The effects of the moving speed on output voltage, current, and power are illustrated in three cases, that is, the motion with constant speed, the sinusoidal motion cycles, and the real walking cycles by human subject. The fully verified theoretical model is a very powerful tool to guide the design of the device structure and selection of materials, and optimization of performance with respect to the application conditions of TENGs.     

Possible target‐related proteins and signal network of bufalin in A549 cells suggested by both iTRAQ‐based and label‐free proteomic analysis

Bufalin (BF) exhibited antiproliferation and antimigration effects on human A549 lung cancer cells. To search its target‐related proteins, protein expression profiles of BF‐treated and control cells were compared using two quantitative proteomic methods, iTRAQ‐based and label‐free proteomic analysis. A total of 5428 proteins were identified in iTRAQ‐based analysis while 6632 proteins were identified in label‐free analysis. The number of common identified proteins of both methods was 4799 proteins. By application of 1.20‐fold for upregulated and 0.83‐fold for downregulated cutoff values, 273 and 802 differentially expressed proteins were found in iTRAQ‐based and label‐free analysis, respectively. The number of common differentially expressed proteins of both methods was 45 proteins. Results of bioinformational analysis using Metacore^TM showed that the two proteomic methods were complementary and both suggested the involvement of oxidative stress and regulation of gene expression in the effects of BF, and fibronectin‐related pathway was suggested to be an important pathway affected by BF. Western blotting assay results confirmed BF‐induced change in levels of fibronectin and other related proteins. Overexpression of fibronectin by plasmid transfection ameliorated antimigration effects of BF. Results of the present study provided information about possible target‐related proteins and signal network of BF.     

Effect of propionic acid on citric acid fermentation in an integrated citric acid–methane fermentation process

In this study, an integrated citric acid-methane fermentation process was established to solve the problem of wastewater treatment in citric acid production. Citric acid wastewater was treated through anaerobic digestion and then the anaerobic digestion effluent (ADE) was further treated and recycled for the next batch citric acid fermentation. This process could eliminate wastewater discharge and reduce water resource consumption. Propionic acid was found in the ADE and its concentration continually increased in recycling. Effect of propionic acid on citric acid fermentation was investigated, and results indicated that influence of propionic acid on citric acid fermentation was contributed to the undissociated form. Citric acid fermentation was inhibited when the concentration of propionic acid was above 2, 4, and 6 mM in initial pH 4.0, 4.5 and, 5.0, respectively. However, low concentration of propionic acid could promote isomaltase activity which converted more isomaltose to available sugar, thereby increasing citric acid production. High concentration of propionic acid could influence the vitality of cell and prolong the lag phase, causing large amount of glucose still remaining in medium at the end of fermentation and decreasing citric acid production.     

Trade‐Off between Trap Filling,Trap Creation,and Charge Recombination Results in Performance Increase at Ultralow Doping Levels in Bulk Heterojunction Solar Cells

Doping of organic bulk heterojunction solar cells has the potential to improve their power conversion efficiency (PCE). Deconvoluting the effect of doping on charge transport, recombination, and energetic disorder remains challenging. It is demonstrated that molecular doping has two competing effects: on one hand, dopant ions create additional traps while on the other hand free dopant‐induced charges fill deep states possibly leading to V _OC and mobility increases. It is shown that molar dopant concentrations as low as a few parts per million can improve the PCE of organic bulk heterojunctions. Higher concentrations degrade the performance of the cells. In doped cells where PCE is observed to increase, such improvement cannot be attributed to better charge transport. Instead, the V _OC increase in unannealed P3HT:PCBM cells upon doping is indeed due to trap filling, while for annealed P3HT:PCBM cells the change in V _OC is related to morphology changes and dopant segregation. In PCDTBT:PC70BM cells, the enhanced PCE upon doping is explained by changes in the thickness of the active layer. This study highlights the complexity of bulk doping in organic solar cells due to the generally low doping efficiency and the constraint on doping concentrations to avoid carrier recombination and adverse morphology changes.     

Comparison of the Morphology Development of Polymer–Fullerene and Polymer–Polymer Solar Cells during Solution‐Shearing Blade Coating

In this work, the detailed morphology studies of polymer poly(3‐hexylthiophene‐2,5‐diyl) (P3HT):fullerene(PCBM) and polymer(P3HT):polymer naphthalene diimide thiophene (PNDIT) solar cell are presented to understand the challenge for getting high performance all‐polymer solar cells. The in situ X‐ray scattering and optical interferometry and ex situ hard and soft X‐ray scattering and imaging techniques are used to characterize the bulk heterojunction (BHJ) ink during drying and in dried state. The crystallization of P3HT polymers in P3HT:PCBM bulk heterojunction shows very different behavior compared to that of P3HT:PNDIT BHJ due to different mobilities of P3HT in the donor:acceptor glass. Supplemented by the ex situ grazing incidence X‐ray diffraction and soft X‐ray scattering, PNDIT has a lower tendency to form a mixed phase with P3HT than PCBM, which may be the key to inhibit the donor polymer crystallization process, thus creating preferred small phase separation between the donor and acceptor polymer.     

Improvement in the docosahexaenoic acid production of <Emphasis Type="Italic">Schizochytrium</Emphasis> sp. S056 by replacement of sea salt

Schizochytrium is a marine microalga that requires high concentrations of sea salt for growth, although problems arise with significant amounts of chloride ions in the culture medium, which corrodes the fermenters. In this work, we evaluated that cell growth and docosahexaenoic acid (DHA) production can be improved when using 1 % (w/v) sodium sulfate instead of 2 % (w/v) sea salt in the culture medium for Schizochytrium sp. S056. In practice, the use of sodium sulfate as the sodium salt led to chloride ion levels in the medium that can be completely removed, thus avoiding fermenter corrosion during Schizochytrium sp. S056 growth, reducing cost and increasing DHA production, and simplifying the disposal of fermentation wastewater. Additionally, we demonstrated that the osmolality of growth media did not play a crucial role in the production of DHA. These findings may be significantly important to companies involved in production of PUFAs by marine microbes.