Microiontophoresis and Micromanipulation for Intravital Fluorescence Imaging of the Microcirculation

Microiontophoresis entails passage of current through a micropipette tip to deliver a solute at a designated site within an experimental preparation. Microiontophoresis can simulate synaptic transmission¹ by delivering neurotransmitters and neuropeptides onto neurons reproducibly². Negligible volume (fluid) displacement avoids mechanical disturbance to the experimental preparation. Adapting these techniques to the microcirculation³ has enabled mechanisms of vasodilation and vasoconstriction to be studied at the microscopic level in vivo^4,5. A key advantage of such localized delivery is enabling vasomotor responses to be studied at defined sites within a microvascular network without evoking systemic or reflexive changes in blood pressure and tissue blood flow, thereby revealing intrinsic properties of microvessels.A limitation of microiontophoresis is that the precise concentration of agent delivered to the site of interest is difficult to ascertain⁶. Nevertheless, its release from the micropipette tip is proportional to the intensity and duration of the ejection current^2,7, such that reproducible stimulus-response relationships can be readily determined under defined experimental conditions (described below). Additional factors affecting microiontophoretic delivery include solute concentration and its ionization in solution. The internal diameter of the micropipette tip should be ˜ 1 μm or less to minimize diffusional ''leak'', which can be counteracted with a retaining current. Thus an outward (positive) current is used to eject a cation and a negative current used to retain it within the micropipette.Fabrication of micropipettes is facilitated with sophisticated electronic pullers⁸. Micropipettes are pulled from glass capillary tubes containing a filament that ''wicks'' solution into the tip of the micropipette when filled from the back end ("backfilled"). This is done by inserting a microcapillary tube connected to a syringe containing the solution of interest and ejecting the solution into the lumen of the micropipette. Micromanipulators enable desired placement of micropipettes within the experimental preparation. Micromanipulators mounted on a movable base can be positioned around the preparation according to the topography of microvascular networks (developed below). The present protocol demonstrates microiontophoresis of acetylcholine (ACh⁺ Cl^-) onto an arteriole of the mouse cremaster muscle preparation (See associated protocol: JoVE ID#2874) to produce endothelium-dependent vasodilation. Stimulus delivery is synchronized with digitized image acquisition using an electronic trigger. The use of Cx40^BAC-GCaMP2 transgenic mice⁹ enables visualization of intracellular calcium responses underlying vasodilation in arteriolar endothelial cells in the living microcirculation.Download video file.^{(37M, mov)}     

Transient state kinetics of enzyme IICBGlc, a glucose transporter of the phosphoenolpyruvate phosphotransferase system of Escherichia coli: equilibrium and second order rate constants for the glucose binding and phosphotransfer reactions

During translocation across the cytoplasmic membrane of Escherichia coli, glucose is phosphorylated by phospho-IIA(Glc) and Enzyme IICB(Glc), the last two proteins in the phosphotransfer sequence of the phosphoenolpyruvate:glucose phosphotransferase system. Transient state (rapid quench) methods were used to determine the second order rate constants that describe the phosphotransfer reactions (phospho-IIA(Glc) to IICB(Glc) to Glc) and also the second order rate constants for the transfer from phospho-IIA(Glc) to molecularly cloned IIB(Glc), the soluble, cytoplasmic domain of IICB(Glc). The rate constants for the forward and reverse phosphotransfer reactions between IIA(Glc) and IICB(Glc) were 3.9 x 10(6) and 0.31 x 10(6) m(-1) s(-1), respectively, and the rate constant for the physiologically irreversible reaction between [P]IICB(Glc) and Glc was 3.2 x 10(6) m(-1) s(-1). From the rate constants, the equilibrium constants for the transfer of the phospho-group from His90 of [P]IIA(Glc) to the phosphorylation site Cys of IIB(Glc) or IICB(Glc) were found to be 3.5 and 12, respectively. These equilibrium constants signify that the thiophospho-group in these proteins has a high phosphotransfer potential, similar to that of the phosphohistidinyl phosphotransferase system proteins. In these studies, preparations of IICB(Glc) were invariably found to contain endogenous, firmly bound Glc (estimated K'(D) approximately 10(-7) m). The bound Glc was kinetically competent and was rapidly phosphorylated, indicating that IICB(Glc) has a random order, Bi Bi, substituted enzyme mechanism. The equilibrium constant for the binding of Glc was deduced from differences in the statistical goodness of fit of the phosphotransfer data to the kinetic model.     

Discordance in diagnosis of osteoporosis using spine and hip bone densitometry

BACKGROUND: Diagnostic discordance for osteoporosis is the observation that the T-score of an individual patient varies from one key measurement site to another, falling into two different diagnostic categories identified by the World Health Organization (WHO) classification system. This study was conducted to evaluate the presence and risk factors for this phenomenon in a large sample of Iranian population. METHODS: Demographic data, anthropometric measurements, and risk factors for osteoporosis were derived from a database on 4229 patients referred to a community-based outpatient osteoporosis testing center from 2000 to 2003. Dual-energy X-ray absorptiometry (DXA) was performed on L1-L4 lumbar spine and total hip for all cases. Minor discordance was defined as present when the difference between two sites was no more than one WHO diagnostic class. Major discordance was present when one site is osteoporotic and the other is normal. Subjects with incomplete data were excluded. RESULTS: In 4188 participants (3848 female, mean age 53.4 +/- 11.8 years), major discordance, minor discordance, and concordance of T-scores were seen in 2.7%, 38.9% and 58.3%, respectively. In multivariate logistic regression analysis, older age, menopause, obesity, and belated menopause were recognized as risk factors and hormone replacement therapy as a protective factor against T-score discordance. CONCLUSION: The high prevalence of T-score discordance may lead to problems in interpretation of the densitometry results for some patients. This phenomenon should be regarded as a real and prevalent finding and physicians should develop a particular strategy approaching to these patients.     

An electrochemical biosensor for 3-hydroxybutyrate detection based on screen-printed electrode modified by coenzyme functionalized carbon nanotubes

3-Hydroxybutyrate, one of the main blood ketone bodies, has been considered as a critical indicator for diagnosis of diabetic ketoacidosis. Biosensors designed for detection of 3-hydroxybutyrate with advantages of precision, easiness and speedy performance have attracted increasing attention. This study attempted to develop a 3-hydroxybutyrate dehydrogenase-based biosensor in which single-walled carbon nanotubes (SWCNT) was used in order to immobilize the cofactor, NAD⁺, on the surface of screen-printed electrode. The formation of NAD⁺–SWCNT conjugates was assessed by electrochemistry and electron microscopy. Cyclic voltammetry was used to analyze the performance of this biosensor electrochemically. The considerable shelf life and reliability of the proposed biosensor to analyze real sample was confirmed by this method. The reduction in the over potential of electrochemical oxidation of NADH to ?0.15 V can be mentioned as a prominent feature of this biosensor. This biosensor can detect 3-hydroxybutyrate in the linear range of 0.01–0.1 mM with the low detection limit of 0.009 mM. Simultaneous application of screen-printed electrode and SWCNT has made the biosensor distinguished which can open new prospects for detection of other clinically significant metabolites.     

Synthesis, in vitro antibacterial and carbonic anhydrase II inhibitory activities of N-acylsulfonamides using silica sulfuric acid as an efficient catalyst under both solvent-free and heterogeneous conditions

Silica sulfuric acid catalyzes efficiently the reaction of sulfonamides with both carboxylic acid anhydrides and chlorides under solvent-free and heterogeneous conditions. All the reactions were done at room temperature and the N-acylsulfonamides were obtained with high yields and purity via an easy work-up procedure. This method is attractive and is in a close agreement with green chemistry. These compounds were also investigated for antibacterial activity, including Gram-positive cocci and Gram-negative bacilli, and carbonic anhydrase II inhibitory activity.     

Performance evaluation of potent phosphate solubilizing bacteria in potato rhizosphere

Three phosphate solubilizing bacterial isolates identified as Pantoea agglomerans strain P5, Microbacterium laevaniformans strain P7 and Pseudomonas putida strain P13 were assessed for mutual relationships among them, competitiveness with soil microorganisms and associations with plant root using luxAB reporter genes for follow-up studies. Synergism between either P. agglomerans or M. laevaniformans, as acid-producing bacteria, and P. putida, as a strong phosphatase producer, was consistently observed both in liquid culture medium and in root rhizosphere. All laboratory, greenhouse and field experiments proved that these three isolates compete well with naturally occurring soil microorganisms. Consistently, the combinations of either P. agglomerans or M. laevaniformans strains with Pseudomonas putida led to higher biomass and potato tuber in greenhouse and in field trials. It is conceivable that combinations of an acid- and a phosphatase-producing bacterium would allow simultaneous utilization of both inorganic and organic phosphorus compounds preserving the soil structure.     

Shaken not stirred: a facile synthesis of 1,4-bis(furo[2,3-d]-pyrimidine-2,4(1H,3H)-dione-5-yl)benzenes by one-pot reaction of isocyanides, N,N'-dimethylbarbituric acid, and terephthaldialdehyde

A simple and efficient synthesis of 1,4-bis(furo[2,3-d]pyrimidine-2,4(1H,3H)-dione-5-yl)benzene derivatives was achieved via a one-pot three-component reaction of isocyanides, N,N'-dimethylbarbituric acid, and terephthaldialdehyde in DMF at room temperature for 30 min. These improved reaction conditions allow the preparation of highly substituted furopyrimidinones in high yields and purity under mild reaction conditions.