Structural investigations of calcium binding and its role in activity and activation of outer membrane phospholipase A from Escherichia coli

Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme that catalyses the hydrolysis of phospholipids. Enzymatic activity is regulated by reversible dimerisation and calcium-binding. We have investigated the role of calcium by X-ray crystallography. In monomeric OMPLA, one calcium ion binds between two external loops (L3L4 site) at 10 A from the active site. After dimerisation, a new calcium-binding site (catalytic site) is formed at the dimer interface in the active site of each molecule at 6 A from the L3L4 calcium site. The close spacing and the difference in calcium affinity of both sites suggests that the L3L4 site may function as a storage site for a calcium ion, which relocates to the catalytic site upon dimerisation. A sequence alignment demonstrates conservation of the catalytic calcium site but evolutionary variation of the L3L4 site. The residues in the dimer interface are conserved as well, suggesting that all outer membrane phospholipases require dimerisation and calcium in the catalytic site for activity. For this family of phospholipases, we have characterised a consensus sequence motif (YTQ-X(n)-G-X(2)-H-X-SNG) that contains conserved residues involved in dimerisation and catalysis.     

NMR structure of cysteinyl-phosphorylated enzyme IIB of the N,N'-diacetylchitobiose-specific phosphoenolpyruvate-dependent phosphotransferase system of Escherichia coli

The determination by NMR of the solution structure of the phosphorylated enzyme IIB (P-IIB(Chb)) of the N,N'-diacetylchitobiose-specific phosphoenolpyruvate-dependent phosphotransferase system of Escherichia coli is presented. Most of the backbone and side-chain resonances were assigned using a variety of mostly heteronuclear NMR experiments. The remaining resonances were assigned with the help of the structure calculations.NOE-derived distance restraints were used in distance geometry calculations followed by molecular dynamics and simulated annealing protocols. In addition, combinations of ambiguous restraints were used to resolve ambiguities in the NOE assignments. By combining sets of ambiguous and unambiguous restraints into new ambiguous restraints, an error function was constructed that was less sensitive to information loss caused by assignment uncertainties. The final set of structures had a pairwise rmsd of 0.59 A and 1.16 A for the heavy atoms of the backbone and side-chains, respectively.Comparing the P-IIB(Chb) solution structure with the previously determined NMR and X-ray structures of the wild-type and the Cys10Ser mutant shows that significant differences between the structures are limited to the active-site region. The phosphoryl group at the active-site cysteine residue is surrounded by a loop formed by residues 10 through 16. NOE and chemical shift data suggest that the phosphoryl group makes hydrogen bonds with the backbone amide protons of residues 12 and 15. The binding mode of the phosphoryl group is very similar to that of the protein tyrosine phosphatases. The differences observed are in accordance with the presumption that IIB(Chb) has to be more resistant to hydrolysis than the protein tyrosine phosphatases. We propose a proton relay network by which a transfer occurs between the cysteine SH proton and the solvent via the hydroxyl group of Thr16.     

Functional importance of calcium binding sites in outer membrane phospholipase A

Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme that hydrolyses phospholipids requiring Ca(2+) as cofactor. In vitro studies have shown that OMPLA is only active as a dimer. The structures of monomeric and dimeric OMPLA provided possible clues to the activation process. In the inhibited dimeric species calcium ions are located at the dimer interface ideally suited to stabilise the oxyanion intermediates formed during catalysis. The side chain hydroxyl function of Ser152 is one of the ligands of this interfacial calcium. In the crystal structure of monomeric OMPLA the interfacial calcium site is lacking, but calcium was found to bind at a site involving the carboxylates of Asp149 and Asp184. In the current study the relevance of the identified calcium sites has been studied by site-directed mutagenesis. The Ser152Asn variant confirmed the importance of the interfacial calcium site for catalysis, and also demonstrated that this site is essentially involved in the dimerisation process. Replacements of the ligands in monomeric OMPLA, i.e. Asp149Asn, Asp149Ala and Asp184Asn, only showed minor effects on catalytic activity and dimerisation. A stronger effect observed for the variant Asp184Ala was explained by the proximity of Asp184 to the catalytically important Ser152 residue. We propose that Asp149 and Asp184 provide an electronegative funnel that may facilitate Ca(2+) transfer to the interfacial calcium site.     

Process design for enzymatic adipyl-7-ADCA hydrolysis

Adipyl-7-ADCA is a new source for 7-aminodeacetoxycephalosporanic acid (7-ADCA), one of the substrates for antibiotics synthesis. In this paper, a novel process for enzymatic 7-ADCA production is presented. The process consists of a reactor, a crystallization step, a membrane separation step, and various recycle loops. The reactor can either be operated batch-wise or continuously; with both types of processing high yields can be obtained. For batch reactors chemical degradation of 7-ADCA can be neglected. For continuous reactors, chemical stability of 7-ADCA is a factor to be taken into account. However, it was shown that the reaction conditions and reactor configuration could be chosen in such a way that also for continuous operation chemical degradation is not important. Downstream processing consisted of crystallization of 7-ADCA at low pH, followed by a nanofiltration step with which, at low pH, adipic acid could be separated from adipyl-7-ADCA and 7-ADCA. The separation mechanism of the nanofilter is based on size exclusion combined with charge effects. Application of this filtration step opens possibilities for recycling components to various stages of the process. Adipic acid can be recycled to the fermentation stage of the process while both adipyl-7-ADCA and 7-ADCA can be returned to the hydrolysis reactor. In this way, losses of substrates and product can be minimized.     

Unusual catalytic triad of Escherichia coli outer membrane phospholipase A

Escherichia coli outer membrane phospholipase A (OMPLA) is an integral membrane enzyme. OMPLA is active as a homodimer and requires calcium as a cofactor. The crystal structures of the monomeric and the inhibited dimeric enzymes were recently determined [Snijder, H. J., et al. (1999) Nature 401, 717-721] and revealed that OMPLA monomers are folded into a 12-stranded antiparallel beta-barrel. The active site consists of previously identified essential residues Ser144 and His142 in an arrangement resembling the corresponding residues of a serine hydrolase catalytic triad. However, instead of an Asp or Glu that normally is present in the triad of serine hydrolases, a neutral asparagine (Asn156) was found in OMPLA. In this paper, the importance of the catalytic Asn156 is addressed by site-directed mutagenesis studies. All variants were purified at a 30 mg scale, and were shown to be properly folded using SDS-PAGE and circular dichroism spectroscopy. Using chemical cross-linking, it was shown that all variants were not affected in their calcium-dependent dimerization properties. The Asn156Asp variant exhibited a 2-fold lower activity than wild-type OMPLA at neutral pH. Interestingly, the activity of the variant is 1 order of magnitude higher than that of the wild type at pH >10. Modest residual activities (5 and 2.5%, respectively) were obtained for the Asn156Ala and Asn156Gln mutants, showing that the active site of OMPLA is more tolerant toward replacements of this third residue of the catalytic triad than other serine hydrolases, and that the serine and histidine residues are minimally required for catalysis. In the X-ray structure of dimeric OMPLA, the cofactor calcium is coordinating the putative oxyanion via two water molecules. We propose that this may lessen the importance for the asparagine in the catalytic triad of OMPLA.     

A simplified sliding-filament muscle model for simulation purposes

A muscle model based on the sliding filament concept is put forward. The model is simplified in such a way that it may easily be simulated on a computer (analog or digital). The model shows quite a few muscle properties rather well e.g. Hill's relation, quick-stretch and quick-release series elasticity and some dynamic transfer properties. It is found that, using an antagonistic muscle model pair and an appropriate load, realistic arm movements can be simulated.     

Leaf senescence of Quercus myrtifolia as affected by long-term CO2 enrichment in its native environment

The long‐term effects of elevated (ambient plus 350 μmol mol^?1) atmospheric CO₂ concentration (C_a) on the leaf senescence of Quercus myrtifolia Willd was studied in a scrub‐oak community during the transition from autumn (December 1997) to spring (April 1998). Plants were grown in large open‐top chambers at the Smithsonian CO₂ Research Site, Merritt Island Wildlife Refuge, Cape Canaveral, Florida. Chlorophyll (a + b) concentration, Rubisco activity and N concentration decreased by 75%, 82%, and 52%, respectively, from December (1997) to April (1998) in the leaves grown at ambient C_a. In contrast, the leaves of plants grown at elevated C_a showed no significant decrease in chlorophyll (a + b) concentration or Rubisco activity, and only a 25% reduction in nitrogen. These results indicate that leaf senescence was delayed during this period at elevated C_a. Delayed leaf senescence in elevated C_a had important consequences for leaf photosynthesis. In elevated C_a the net photosynthetic rate of leaves that flushed in Spring 1997 (last year's leaves) and were 13 months old was not different from fully‐expanded leaves that flushed in 1998, and were approximately 1 month old (current year's leaves). In ambient C_a the net photosynthetic rate of last year's leaves was 54% lower than for current year's leaves. When leaves were fully senesced, nitrogen concentration decreased to about 40% of the concentration in non‐senesced leaves, in both CO₂ treatments. In April, net photosynthesis was 97% greater in leaves grown in elevated C_a than in those grown at ambient. During the period when elevated C_a delayed leaf senescence, more leaves operating at higher photosynthetic rate would allow the ecosystem dominated by Q. myrtifolia to gain more carbon at elevated C_a than at ambient C_a.     

The Modified painDETECT Questionnaire for Patients with Hip or Knee Osteoarthritis: Translation into Dutch,Cross-Cultural Adaptation and Reliability Assessment

There is a growing amount of evidence that alteration in pain processing by the peripheral and central nervous system play a role in osteoarthritis pain, leading to neuropathic-like symptoms. It is essential to identify knee and hip osteoarthritis patients with a neuropathic pain profile in order to offer such patients education and additional treatment options besides conventional pain treatment. The painDETECT Questionnaire is a self-report questionnaire developed to discriminate between nociceptive and neuropathic pain. This questionnaire was modified to fit patients suffering from knee osteoarthritis. The aim of this study was to translate and cross-culturally adapt the modified painDETECT Questionnaire to the Dutch language and to provide a modified version to fit patients with hip osteoarthritis. Reliability for internal consistency, repeatability and floor and ceiling effects were subsequently assessed. A total of 278 patients were included in the reliability study and 123 patients in the repeatability analysis. The Dutch modified painDETECT Questionnaire shows good internal consistency and small relative measurement errors, represented by a good intraclass correlation coefficient. Absolute measurement error, represented by the Standard Error of Measurement, was acceptable. However, a measurement bias might be present when it comes to repeatability. To our knowledge, this study is the first to provide a Dutch modified painDETECT Questionnaire to fit hip and knee osteoarthritis patients and to assess internal consistency, reliability and agreement. International guidelines were followed in the translation process and this study has ample sample size with an adequate time interval for repeatability. Based on this study, the Dutch modified painDETECT Questionnaire seems to be fit as a discriminative tool to identify knee and hip osteoarthritis patients with a neuropathic pain profile. Whether it is also suitable as an evaluative tool to record changes over time or after an intervention remains open to further investigation.     

Low-dose CT measurements of airway dimensions and emphysema associated with airflow limitation in heavy smokers: a cross sectional study

Background

Increased airway wall thickness (AWT) and parenchymal lung destruction both contribute to airflow limitation. Advances in computed tomography (CT) post-processing imaging allow to quantify these features. The aim of this Dutch population study is to assess the relationships between AWT, lung function, emphysema and respiratory symptoms.

Methods

AWT and emphysema were assessed by low-dose CT in 500 male heavy smokers, randomly selected from a lung cancer screening population. AWT was measured in each lung lobe in cross-sectionally reformatted images with an automated imaging program at locations with an internal diameter of 3.5 mm, and validated in smaller cohorts of patients. The 15^th percentile method (Perc15) was used to assess the severity of emphysema. Information about respiratory symptoms and smoking behavior was collected by questionnaires and lung function by spirometry.

Results

Median AWT in airways with an internal diameter of 3.5 mm (AWT_3.5) was 0.57 (0.44 - 0.74) mm. Median AWT in subjects without symptoms was 0.52 (0.41-0.66) and in those with dyspnea and/or wheezing 0.65 (0.52-0.81) mm (p<0.001). In the multivariate analysis only AWT_3.5 and emphysema independently explained 31.1%and 9.5%of the variance in FEV₁%predicted, respectively, after adjustment for smoking behavior.

Conclusions

Post processing standardization of airway wall measurements provides a reliable and useful method to assess airway wall thickness. Increased airway wall thickness contributes more to airflow limitation than emphysema in a smoking male population even after adjustment for smoking behavior.