冬虫夏草菌实时荧光定量PCR内参基因的筛选

以冬虫夏草单子囊孢子分离得到的菌株TZ8-1的3种菌丝形态为实验材料,提取RNA,经反转录获取cDNA,选择了11个持家基因为候选内参基因（18S rRNA、APRTase、β-TUB、RPL2、EF1-α、PGI、PGM、H⁺-ATPase、ACT1、UBQ和GAPDH）,根据该菌基因组注释结果来设计引物,采用实时荧光定量PCR（qRT-PCR）技术进行定量扩增,利用geNorm、NormFinder和BestKeeper算法程序进行表达稳定性评估,并用RefFinder对评估结果进行综合排比,最终筛选得到了最适内参基因。结果表明,所选取的11个候选内参基因均可作为冬虫夏草菌菌丝体时期的内参基因,稳定性最好的3个内参基因分别是UBQ、PGE和ACT1,稳定性较差的3个内参基因分别是GAPDH、RPL2和β-TUB。     

肺结节病合并Alternaria alternata所致皮肤链格孢病1例

患者,女,61岁,确诊肺结节病、口服糖皮质激素7月,双手背及腕部红色斑块3个月。组织病理示表皮轻度棘层增厚,真皮浅、中层中性粒细胞、淋巴、组织细胞、浆细胞、多核巨细胞混合性浸润,可见散在双轮廓厚壁酵母样结构。六铵银染色见不规则肿胀菌丝及酵母样厚壁孢子。真菌培养见棕/灰褐色菌落,镜下见棕色分隔孢子。ITS区序列分析鉴定为Alternaria alternate。口服伊曲康唑胶囊200 mg/d,联合外用硝酸舍他康唑乳膏2次/d,连续用药4个月后皮损完全消退,随访半年,未见复发。     

6种复配杀虫剂对七星瓢虫的毒力测定及风险评估

采用药膜法分别测定了10％甲维盐·茚虫威悬浮剂、12％甲维盐·虫螨腈悬浮剂、12％虫螨腈·虱螨脲悬浮剂、14％呋虫胺·螺虫乙酯悬浮剂、22％吡虫啉·螺虫乙酯悬浮剂和6％吡虫啉·高效氯氟氰菊酯悬浮剂6种复配杀虫剂对七星瓢虫Coccinella septempunctata Linnaeus幼虫急性毒性,并进行了初级风险评估.结果 显示,6种药剂对七星瓢虫48 h的LR5o(半致死用量,Median lethal rate)分别为0.812、2.255、4.082、22.735、6.755和0.00467 g a.i/hm2.在农田内暴露场景下,6种复配杀虫剂对七星瓢虫风险均不可接受;在农田外暴露场景下,仅有14％呋虫胺·螺虫乙酯悬浮剂和22％吡虫啉·螺虫乙酯悬浮剂对七星瓢虫风险可接受,其它均不可接受.结果 表明在田间最大推荐用量下,6种药剂对七星瓢虫的初级风险评价均存在高风险.     

Sustained expression of MCP-1 induced low wall shear stress loading in conjunction with turbulent flow on endothelial cells of intracranial aneurysm

Shear stress was reported to regulate the expression of AC007362, but its underlying mechanisms remain to be explored. In this study, to isolate endothelial cells of blood vessels, unruptured and ruptured intracranial aneurysm (IA) tissues were collected from IA patients. Subsequently, quantitative real-time PCR (qRT-PCR), Western blot and luciferase assay were performed to investigate the relationships between AC007362, miRNAs-493 and monocyte chemoattractant protein-1 (MCP-1) in human umbilical vein endothelial cells (HUVECs) exposed to shear stress. Reduced representation bisulphite sequencing (RRBS) was performed to assess the level of DNA methylation in AC007362 promoter. Accordingly, AC007362 and MCP-1 were significantly up-regulated while miR-493 was significantly down-regulated in HUVECs exposed to shear stress. AC007362 could suppress the miR-493 expression and elevate the MCP-1 expression, and miR-493 was shown to respectively target AC007362 and MCP-1. Moreover, shear stress in HUVECs led to the down-regulated DNA methyltransferase 1 (DNMT1), as well as the decreased DNA methylation level of AC007362 promoter. Similar results were also observed in ruptured IA tissues when compared with unruptured IA tissues. In conclusion, this study presented a deep insight into the operation of the regulatory network of AC007362, miR-493 and MCP-1 upon shear stress. Under shear stress, the expression of AC007362 was enhanced by the inhibited promoter DNA methylation, while the expression of MCP-1 was enhanced by sponging the expression of miR-493.     

SGT1 is not required for plant LRR-RLK-mediated immunity

Plant immune signalling activated by the perception of pathogen-associated molecular patterns (PAMPs) or effector proteins is mediated by pattern-recognition receptors (PRRs) and nucleotide-binding and leucine-rich repeat domain-containing receptors (NLRs), which often share cellular components and downstream responses. Many PRRs are leucine-rich repeat receptor-like kinases (LRR-RLKs), which mostly perceive proteinaceous PAMPs. The suppressor of the G2 allele of skp1 (SGT1) is a core immune regulator required for the activation of NLR-mediated immunity. In this work, we examined the requirement of SGT1 for immune responses mediated by several LRR-RLKs in both Nicotiana benthamiana and Arabidopsis. Using complementary genetic approaches, we found that SGT1 is not limiting for early PRR-dependent responses or antibacterial immunity. We therefore conclude that SGT1 does not play a significant role in bacterial PAMP-triggered immunity.     

Cross-scale quality assessment of a mechanistic cation exchange chromatography model

Cation exchange chromatography (CEX) is an essential part of most monoclonal antibody (mAb) purification platforms. Process characterization and root cause investigation of chromatographic unit operations are performed using scale down models (SDM). SDM chromatography columns typically have the identical bed height as the respective manufacturing-scale, but a significantly reduced inner diameter. While SDMs enable process development demanding less material and time, their comparability to manufacturing-scale can be affected by variability in feed composition, mobile phase and resin properties, or dispersion effects depending on the chromatography system at hand. Mechanistic models can help to close gaps between scales and reduce experimental efforts compared to experimental SDM applications. In this study, a multicomponent steric mass-action (SMA) adsorption model was applied to the scale-up of a CEX polishing step. Based on chromatograms and elution pool data ranging from laboratory- to manufacturing-scale, the proposed modeling workflow enabled early identification of differences between scales, for example, system dispersion effects or ionic capacity variability. A multistage model qualification approach was introduced to measure the model quality and to understand the model's limitations across scales. The experimental SDM and the in silico model were qualified against large-scale data using the identical state of the art equivalence testing procedure. The mechanistic chromatography model avoided limitations of the SDM by capturing effects of bed height, loading density, feed composition, and mobile phase properties. The results demonstrate the applicability of mechanistic chromatography models as a possible alternative to conventional SDM approaches.     

A muscle-path-plane method for representing muscle contraction during joint movement

Traditional muscle paths (the straight-line model and the viapoint-line model) emphasise either the mechanical properties that arouse joint movement or the morphological characteristics of the muscles. To consider both the factors, a muscle-path-plane (MPP) method is introduced to model the paths of muscles during joint movement. This method is based on the premise that there is a MPP, constructed by origin, insertion and MPP control point, which represents the major direction of the muscle contraction for an arbitrary joint configuration at any time. Then, we can calculate the functions and the lengths of the muscle paths during instantaneous joint movement in MPP by mathematical approaches. Taking the triceps brachii as an example, the lengths of its paths during elbow flexion are calculated and compared with the relative studies reported in the literature. It is concluded that this method can provide an insight into the simulation of the muscle contraction.     

Development of software for human muscle force estimation

Muscle force estimation (MFE) has become more and more important in exploring principles of pathological movement, studying functions of artificial muscles, making surgery plan for artificial joint replacement, improving the biomechanical effects of treatments and so on. At present, existing software are complex for professionals, so we have developed a new software named as concise MFE (CMFE). CMFE which provides us a platform to analyse muscle force in various actions includes two MFE methods (static optimisation method and electromyographic-based method). Common features between these two methods have been found and used to improve CMFE. A case studying the major muscles of lower limb of a healthy subject walking at normal speed has been presented. The results are well explained from the effect of the motion produced by muscles during movement. The development of this software can improve the accuracy of the motion simulations and can provide a more extensive and deeper insight in to muscle study.