Physiological and ultrastructural responses of Catharanthus roseus cell suspension to salt stress

Catharanthus roseus (L.) cell response to salinity was investigated. Seven days after cell treatment with 100 mM NaCl, they showed a decrease in dry weight and an increase in sodium and chloride contents (about 12.4- and 1.5-fold, respectively, in comparison to the control). At the ultrastructural level, NaCl treatment reduced cell size and increased plastid density. In addition, it reduced the starch grain size and their number per plastid; however, starch content was 1.5-fold increased, which was due to the increase in the plastid density. At the ultrastructural level, the applied salinity had no obvious effects, such as swelling or disorganization of plastids except a slight decrease in the stroma electron density. Equally, no deleterious effect was observed on mitochondria except a small increase of their crista volume and matrix electron density. It was shown that, although the relative sensitivity of C. roseus cells to salt stress pointed by the reduction in the dry weight, a decrease in the cell size, and the high accumulation of toxic ions, they preserved the integrity of their plastids and mitochondria.     

Stochastic modelling of wall stresses in abdominal aortic aneurysms treated by a gene therapy

A stochastic mechanical model using the membrane theory was used to simulate the in vivo mechanical behaviour of abdominal aortic aneurysms (AAAs) in order to compute the wall stresses after stabilisation by gene therapy. For that, both length and diameter of AAAs rats were measured during their expansion. Four groups of animals, control and treated by an endovascular gene therapy during 3 or 28 days were included. The mechanical problem was solved analytically using the geometric parameters and assuming the shape of aneurysms by a ‘parabolic–exponential curve’. When compared to controls, stress variations in the wall of AAAs for treated arteries during 28 days decreased, while they were nearly constant at day 3. The measured geometric parameters of AAAs were then investigated using probability density functions (pdf) attributed to every random variable. Different trials were useful to define a reliable confidence region in which the probability to have a realisation is equal to 99%. The results demonstrated that the error in the estimation of the stresses can be greater than 28% when parameters uncertainties are not considered in the modelling. The relevance of the proposed approach for the study of AAA growth may be studied further and extended to other treatments aimed at stabilisation AAAs, using biotherapies and pharmacological approaches.     

Biodegradation of Malathion with Indigenous Acclimated Activated Sludge in Batch Mode and in Continuous-Flow Packed-Bed Reactor

Acclimated activated sludge was examined for its ability to degrade malathion with and without the presence of glucose as a potential cometabolite substrate. In this study, a packed-bed reactor (PBR) using three kinds of biofilm carriers was employed for efficient degradation of malathion. The results obtained indicate that microorganisms tested were able to degrade malathion. The observed degradation rate of the pesticide in the presence of glucose was the same as without glucose. The activated sludge was found to be able to use malathion as the sole phosphorus source. In contrast, the degradation ability of the activated sludge was lost when the pesticide was used as the sole source of sulfur. The degradation capacity of the PBR was higher than the performance obtained with the batch reactor. The reactor packed with crushed olive kernels exhibited the best performance, allowing a total removal of malathion (10 mg/dm³) within 12 h.     

The advantage of using a starch based non-Newtonian fluid to prepare micro sections

The breakage or distortion of cellular structures is one of the biggest problems in creating micro-sections for wood anatomical analyses in tree-ring as well as other branches of anatomical research. These broken or distorted structures cause artifacts in photomicrographs that require time consuming image manipulation or corrections prior to further analyses. The simple application of a cornstarch, water, and glycerol (CWG) solution (10:8:7 ratio), a so called non-Newtonian fluid to the surface of wooden specimen before sectioning improves the overall quality of the resulting micro-sections. In particular the problem of secondary cell walls splitting off the primary wall while sectioning is drastically reduced. The quality of the sections using this solution is comparable to that obtained from the more laborious and expensive paraffin embedding.     

Comparison of Photoacclimation in Twelve Freshwater Photoautotrophs (Chlorophyte,Bacillaryophyte, Cryptophyte and Cyanophyte) Isolated from a Natural Community

Different representative of algae and cyanobacteria were isolated from a freshwater habitat and cultivated in laboratory to compare their photoacclimation capacity when exposed to a wide range of light intensity and to understand if this factor may modify natural community dominance. All species successfully acclimated to all light intensities and the response of phytoplankton to increased light intensity was similar and included a decrease of most photosynthetic pigments accompanied by an increase in photoprotective pigment content relative to Chl a. Most species also decreased their light absorption efficiency on a biovolume basis. This decrease not only resulted in a lower fraction of energy absorbed by the cell, but also to a lower transfer of energy to PSII and PSI. Furthermore, energy funnelled to PSII or PSI was also rearranged in favour of PSII. High light acclimated organisms also corresponded to high non-photochemical quenching and photosynthetic electron transport reduction state and to a low Φ''_M. Thus photoacclimation processes work toward reducing the excitation pressure in high light environment through a reduction of light absorption efficiency, but also by lowering conversion efficiency. Interestingly, all species of our study followed that tendency despite being of different functional groups (colonial, flagellated, different sizes) and of different phylogeny demonstrating the great plasticity and adaptation ability of freshwater phytoplankton to their light environment. These adjustments may explain the decoupling between growth rate and photosynthesis observed above photosynthesis light saturation point for all species. Even if some species did reach higher growth rate in our conditions and thus, should dominate in natural environment with respect to light intensity, we cannot exclude that other environmental factors also influence the population dynamic and make the outcome harder to predict.     

Metamodelling a 3D architectural root-system model to provide a simple model based on key processes and species functional groups

Plant and Soil - The architecture of root systems determines where and how much resources plants can extract from the soil, how they compete for soil resources, and how they interact with soil...     

When sinks become sources: Adaptive colonization in asexuals*

The establishment of a population into a new empty habitat outside of its initial niche is a phenomenon akin to evolutionary rescue in the presence of immigration. It underlies a wide range of processes, such as biological invasions by alien organisms, host shifts in pathogens, or the emergence of resistance to pesticides or antibiotics from untreated areas. We derive an analytically tractable framework to describe the evolutionary and demographic dynamics of asexual populations in a source-sink system. We analyze the influence of several factors on the establishment success in the sink, and on the time until establishment. To this aim, we use a classic phenotype-fitness landscape (Fisher's geometrical model in n dimensions) where the source and sink habitats have different phenotypic optima. In case of successful establishment, the mean fitness in the sink follows a typical four-phases trajectory. The waiting time to establishment is independent of the immigration rate and has a “U-shaped” dependence on the mutation rate, until some threshold where lethal mutagenesis impedes establishment and the sink population remains so. We use these results to get some insight into possible effects of several management strategies.     

Synthesis and FTIR Conformational Studies of Peptides From the Basic Region of c-Jun: a Critical Analysis on the Basis of CD and NMR Data

Abstract

The peptide (35 residues) corresponding to the basic subdomain (bSD) of c-Jun (residues 252–281) and its fragments NP (N-terminal peptide, 1–19) and CP (C-terminal peptide, 1635) were synthesized in stepwise solid-phase using the tert-butyloxycarbonyl/benzyl strategy. In a previous paper, we have shown that during its binding to the DNA site CRE (cAMP- responsive element) the bSD structure was converted into α-helix from an initial random coil conformation [Krebs, D., Dahmani, B., El Antri, S., Monnot, M., Convert, O., Mauffret, O., Troalen, F. & Fermandjian, S. Eur. J. Biochem. 231, 370–380 (1995)]. Our results suggested both a high flexibility and a helical potential in bSD, these two properties seeming crucial for the accommodation of the basic subdomain of c-Jun to its specific DNA targets. In this work, we assessed the conformational variability of bSD through the study of the secondary structures of its NP and CP fragments in trifluoroethanol (TFE)/²H₂O mixtures, using Fourier transform infrared (FTIR) spectroscopy. The IR results were critically analyzed in light of our previously reported circular dichroism (CD) and NMR data [Krebs, D., Dahmani, B., Monnot, M., Mauffret, O., Troalen, F. & Fermandjian, S. Eur. J. Biochem. 235, 699–712 (1996)]. Upon addition of TFE, the relative areas of the seven components of the amide I band (1700–1620 cm^?1) reflected the conversion of a large amount of random coil conformation into α-helix for the two fragments and bSD. This effect was accompanied by more subtle variations of the less populated structures, in agreement with the results of CD and NMR experiments. The IR results stipulated the conservation of the parent bSD secondary structures in both fragments; however, NP and CP peptides did not display similar random-to-α-helix stabilization pattern upon additions of TFE to aqueous solutions. The profile from CD signal at 222 nm was found sigmoidal for NP and almost linear for CP, while that corresponding to the parent peptide bSD was just in between those of its fragments. Thus, the present study confirms the high flexibility and helix propensity of the c-Jun basic subdomain and suggests that the N- and C-terminal parts of the peptide do not follow the same random-to-helix conversion profile during their complexation with DNA.     

Texture perception through direct and indirect touch: An analysis of perceptual space for tactile textures in two modes of exploration

Considerable information about the texture of objects can be perceived remotely through a probe. It is not clear, however, how texture perception with a probe compares with texture perception with the bare finger. Here we investigate the perception of a variety of textured surfaces encountered daily (e.g., corduroy, paper, and rubber) using the two scanning modes—direct touch through the finger and indirect touch through a probe held in the hand—in two tasks. In the first task, subjects rated the overall pair-wise dissimilarity of the textures. In the second task, subjects rated each texture along three continua, namely, perceived roughness, hardness, and stickiness of the surfaces, shown previously as the primary dimensions of texture perception in direct touch. From the dissimilarity judgment experiment, we found that the texture percept is similar though not identical in the two scanning modes. From the adjective rating experiments, we found that while roughness ratings are similar, hardness and stickiness ratings tend to differ between scanning conditions. These differences between the two modes of scanning are apparent in perceptual space for tactile textures based on multidimensional scaling (MDS) analysis. Finally, we demonstrate that three physical quantities, vibratory power, compliance, and friction carry roughness, hardness, and stickiness information, predicting perceived dissimilarity of texture pairs with indirect touch. Given that different types of texture information are processed by separate groups of neurons across direct and indirect touch, we propose that the neural mechanisms underlying texture perception differ between scanning modes.