Toward a Reversible Calcium‐Sulfur Battery with a Lithium‐Ion Mediation Approach

Calcium represents a promising anode for the development of high‐energy‐density, low‐cost batteries. However, a lack of suitable electrolytes has restricted the development of rechargeable batteries with a Ca anode. Furthermore, to achieve a high energy density system, sulfur would be an ideal cathode to couple with the Ca anode. Unfortunately, a reversible calcium‐sulfur (Ca‐S) battery has not yet been reported. Herein, a basic study of a reversible nonaqueous room‐temperature Ca‐S battery is presented. The reversibility of the Ca‐S chemistry and high utilization of the sulfur cathode are enabled by employing a Li⁺‐ion‐mediated calcium‐based electrolyte. Mechanistic insights pursued by spectroscopic, electrochemical, microscopic, and theoretical simulation (density functional theory) investigations imply that the Li⁺‐ions in the Ca‐electrolyte stimulate the reactivation of polysulfide/sulfide species. The coordination of lithium to sulfur reduces the formation of sturdy Ca‐S ionic bonds, thus boosting the reversibility of the Ca‐S chemistry. In addition, the presence of Li⁺‐ions facilitates the ionic charge transfer both in the electrolyte and across the solid electrolyte interphase layer, consequently reducing the interfacial and bulk impedance of Ca‐S batteries. As a result, both the utilization of active sulfur in the cathode and the discharge voltage of Ca‐S batteries are significantly improved.     

A Lithium–Sulfur Cell Based on Reversible Lithium Deposition from a Li2S Cathode Host onto a Hostless‐Anode Substrate

The development of lithium–sulfur batteries necessitates a thorough understanding of the lithium‐deposition process. A novel full‐cell configuration comprising an Li₂S cathode and a bare copper foil on the anode side is presented here. The absence of excess lithium allows for the realization of a truly lithium‐limited Li–S battery, which operates by reversible plating and stripping of lithium on the hostless‐anode substrate (copper foil). Its performance is closely tied to the efficiency of lithium deposition, generating valuable insights on the role and dynamic behavior of lithium anode. The Li₂S full cell shows reasonable capacity retention with a Coulombic efficiency of 96% over 100 cycles, which is a tremendous improvement over that of a similar lithium‐plating‐based full cell with LiFePO₄ cathodes. The exceptional robustness of the Li₂S system is attributed to an intrinsic stabilization of the lithium‐deposition process, which is mediated by polysulfide intermediates that form protective Li₂S and Li₂S₂ regions on the deposited lithium. Combined with the large improvements in energy density and safety by the elimination of a metallic lithium anode, the stability and electrochemical performance of the lithium‐plating‐based Li₂S full cell establish it as an important trajectory for Li–S battery research, focusing on practical realization of reversible lithium anodes.     

Relevance of Non-ceruloplasmin Copper to Oxidative Stress in Patients with Hepatocellular Carcinoma

Altered copper homeostasis and oxidative stress have been observed in patients with hepatocellular carcinoma. Non-ceruloplasmin copper, the free form, is a potent pro-oxidant than the protein bound copper. The aim of the present study was to evaluate which form of copper can be correlated with the oxidative stress in the circulation and in the malignant liver tissues of hepatocellular carcinoma patients. Hepatocellular carcinoma patients (grades II and III, n = 18) were enrolled in this study. Serum levels of total, free and bound copper, ceruloplasmin, iron, iron-binding capacity, lipid peroxidation products, and enzymatic and non-enzymatic antioxidants were quantified in serum and in malignant liver tissues and compared with those of normal samples (n = 20). A significant positive correlation between the serum non-ceruloplasmin copper and lipid peroxidation products and negative correlation with antioxidants were observed in hepatocellular carcinoma patients. In liver tissue, glutathione peroxidase, superoxide dismutase, and catalase activity were significantly decreased with concomitant elevation in oxidative stress markers. Our experiment revealed that the elevation in non-ceruloplasmin copper has high relevance with the oxidative stress than the bound copper.     

Ringo/cyclin-dependent kinase and mitogen-activated protein kinase signaling pathways regulate the activity of the cell fate determinant Musashi to promote cell cycle re-entry in Xenopus oocytes

Cell cycle re-entry during vertebrate oocyte maturation is mediated through translational activation of select target mRNAs, culminating in the activation of mitogen-activated protein kinase and cyclin B/cyclin-dependent kinase (CDK) signaling. The temporal order of targeted mRNA translation is crucial for cell cycle progression and is determined by the timing of activation of distinct mRNA-binding proteins. We have previously shown in oocytes from Xenopus laevis that the mRNA-binding protein Musashi targets translational activation of early class mRNAs including the mRNA encoding the Mos proto-oncogene. However, the molecular mechanism by which Musashi function is activated is unknown. We report here that activation of Musashi1 is mediated by Ringo/CDK signaling, revealing a novel role for early Ringo/CDK function. Interestingly, Musashi1 activation is subsequently sustained through mitogen-activated protein kinase signaling, the downstream effector of Mos mRNA translation, thus establishing a positive feedback loop to amplify Musashi function. The identified regulatory sites are present in mammalian Musashi proteins, and our data suggest that phosphorylation may represent an evolutionarily conserved mechanism to control Musashi-dependent target mRNA translation.     

Tracking unstable states: ecosystem dynamics in a changing world

Ecological systems can show complex and sometimes abrupt responses to environmental change, with important implications for their resilience. Theories of alternate stable states have been used to predict regime shifts of ecosystems as equilibrium responses to sufficiently slow environmental change. The actual rate of environmental change is a key factor affecting the response, yet we are still lacking a non-equilibrium theory that explicitly considers the influence of this rate of environmental change. We present a metacommunity model of predator–prey interactions displaying multiple stable states, and we impose an explicit rate of environmental change in habitat quality (carrying capacity) and connectivity (dispersal rate). We study how regime shifts depend on the rate of environmental change and compare the outcome with a stability analysis in the corresponding constant environment. Our results reveal that in a changing environment, the community can track states that are unstable in the constant environment. This tracking can lead to regime shifts, including local extinctions, that are not predicted by alternative stable state theory. In our metacommunity, tracking unstable states also controls the maintenance of spatial heterogeneity and spatial synchrony. Tracking unstable states can also lead to regime shifts that may be reversible or irreversible. Our study extends current regime shift theories to integrate rate-dependent responses to environmental change. It reveals the key role of unstable states for predicting transient dynamics and long-term resilience of ecological systems to climate change.     

Somatic hybrids with substitution type genomic configuration TCBB for the transfer of nuclear and organelle genes from Brassica tournefortii TT to allotetraploid oilseed crop B. carinata BBCC

Oilseed crop Brassica carinata BBCC is a natural allotetraploid of diploid species B. nigra BB and B. oleracea CC. To transfer the nuclear and organelle genes in a concerted manner from an alien species, B. tournefortii TT, to B. carinata, we produced somatic hybrids with genomic configuration TCBB using B. nigra and B. oleracea stocks that carried selectable marker genes. B. tournefortii TT was sexually crossed with hygromycin-resistant B. oleracea CC. Protoplasts isolated from shoot cultures of hygromycin-resistant F₁ hybrids of B. tournefortiixB. oleracea TC were fused with protoplasts of kanamycin-resistant B. nigra BB. In two different fusion experiments 80 colonies were obtained through selection on media containing both hygromycin and kanamycin. Of these, 39 colonies regenerated into plants. Analysis of 15 regenerants by random amplified polymorphic DNA (RAPD) markers showed the presence of all three genomes, thereby confirming these to be true hybrids. Restriction fragment length polymorphism (RFLP) analysis of organelle genomes with heterologous chloroplast (cp)and mitochondrial (mt) DNA probes showed that the chloroplast genome was inherited from either of the two parents while mitochondrial genomes predominantly showed novel configurations due to either rearrangements or intergenomic recombinations. We anticipate that the TCBB genomic configuration will provide a more conducive situation for recombination between the T and C genomes during meiosis than the TTCCBB or TCCBB type configurations that are usually produced for alien gene transfer. The agronomic aim of producing TCBB hybrids is to transfer mitochondrial genes conferring cytoplasmic male sterility and nuclear genes for fertility restoration from B. tournefortii to B. carinata.     

Lithium Polyacrylate (LiPAA) as an Advanced Binder and a Passivating Agent for High‐Voltage Li‐Ion Batteries

Intensive studies of an advanced energy material are reported and lithium polyacrylate (LiPAA) is proven to be a surprisingly unique, multifunctional binder for high‐voltage Li‐ion batteries. The absence of effective passivation at the interface of high‐voltage cathodes in Li‐ion batteries may negatively affect their electrochemical performance, due to detrimental phenomena such as electrolyte solution oxidation and dissolution of transition metal cations. A strategy is introduced to build a stable cathode–electrolyte solution interphase for LiNi_0.5Mn_1.5O₄ (LNMO) spinel high‐voltage cathodes during the electrode fabrication process by simply using LiPAA as the cathode binder. LiPAA is a superb binder due to unique adhesion, cohesion, and wetting properties. It forms a uniform thin passivating film on LNMO and conducting carbon particles in composite cathodes and also compensates Li‐ion loss in full Li‐ion batteries by acting as an extra Li source. It is shown that these positive roles of LiPAA lead to a significant improvement in the electrochemical performance (e.g., cycle life, cell impedance, and rate capability) of LNMO/graphite battery prototypes, compared with that obtained using traditional polyvinylidene fluoride (PVdF) binder for LNMO cathodes. In addition, replacing PVdF with LiPAA binder for LNMO cathodes offers better adhesion, lower cost, and clear environmental advantages.     

Electrochemical Energy Storage with a Reversible Nonaqueous Room‐Temperature Aluminum–Sulfur Chemistry

A reversible room‐temperature aluminum–sulfur (Al‐S) battery is demonstrated with a strategically designed cathode structure and an ionic liquid electrolyte. Discharge–charge mechanism of the Al‐S battery is proposed based on a sequence of electrochemical, microscopic, and spectroscopic analyses. The electrochemical process of the Al‐S battery involves the formation of a series of polysulfides and sulfide. The high‐order polysulfides (S_x^2?, x ≥ 6) are soluble in the ionic liquid electrolyte. Electrochemical transitions between S₆^2? and the insoluble low‐order polysulfides or sulfide (S_x ^2?, 1 ≤ x < 6) are reversible. A single‐wall carbon nanotube coating applied to the battery separator helps alleviate the diffusion of the polysulfide species and reduces the polarization behavior of the Al‐S batteries.     

Development of high oleic and low linoleic acid transgenics in a zero erucic acid Brassica juncea L. (Indian mustard) line by antisense suppression of the fad2 gene

A zero erucic acid (C22:1) line of Brassica juncea (VH486), adapted to the agronomic conditions of Northern India, has been modified for its fatty acid composition in the seed oil with antisense constructs using the sequence of fad2 gene of B. rapa. The full-length B. rapa fad2 cDNA sequence was determined by 5 and 3 RACE of a partial sequence available in the EST database. Construct pASfad2.1 contained 315 to 1251 bp and construct pASfad2.2 contained 1 to 1251 bp fragment of the fad2 gene, both in antisense orientation, driven by a truncated napin promoter. Analysis of the levels of linoleic acid (C18:2) in the BC1 seeds of single-copy transgenics showed that the construct pASfad2.2 gave better suppression of the fad2 gene as compared to the construct pASfad2.1. The BC1 transgenic seeds containing the pASfad2.2 construct segregated into two distinct classes of C18:2>20% (putative null homozygotes) and C18:2<20% (putative heterozygotes) in a 1:1 ratio, while the T1 seeds segregated into three classes, C18:2>20%, C18:2 between 12% and 20%) and C18:2<12% (putative homozygotes) in a 1:2:1 ratio. Putative homozygous T1 seeds (C18:2<12% analyzed by the half-seed method) of four of the transgenic lines were grown to establish T2 homozygous lines. These had ca. 73% C18:1 and 8 to 9% each of C18:2 and C18:3 (-linolenic acid) fractions in comparison to ca. 53% C18:1, 24% C18:2 and 16% C18:3 in the parental line VH486.