Mechanical ventilation with high tidal volumes attenuates myocardial dysfunction by decreasing cardiac edema in a rat model of LPS-induced peritonitis

Background

Injurious mechanical ventilation (MV) may augment organ injury remote from the lungs. During sepsis, myocardial dysfunction is common and increased endothelial activation and permeability can cause myocardial edema, which may, among other factors, hamper myocardial function. We investigated the effects of MV with injuriously high tidal volumes on the myocardium in an animal model of sepsis.

Methods

Normal rats and intraperitoneal (i.p.) lipopolysaccharide (LPS)-treated rats were ventilated with low (6 ml/kg) and high (19 ml/kg) tidal volumes (Vt) under general anesthesia. Non-ventilated animals served as controls. Mean arterial pressure (MAP), central venous pressure (CVP), cardiac output (CO) and pulmonary plateau pressure (P_plat) were measured. Ex vivo myocardial function was measured in isolated Langendorff-perfused hearts. Cardiac expression of endothelial vascular cell adhesion molecule (VCAM)-1 and edema were measured to evaluate endothelial inflammation and leakage.

Results

MAP decreased after LPS-treatment and Vt-dependently, both independent of each other and with interaction. MV Vt-dependently increased CVP and Pplat and decreased CO. LPS-induced peritonitis decreased myocardial function ex vivo but MV attenuated systolic dysfunction Vt-dependently. Cardiac endothelial VCAM-1 expression was increased by LPS treatment independent of MV. Cardiac edema was lowered Vt-dependently by MV, particularly after LPS, and correlated inversely with systolic myocardial function parameters ex vivo.

Conclusion

MV attenuated LPS-induced systolic myocardial dysfunction in a Vt-dependent manner. This was associated with a reduction in cardiac edema following a lower transmural coronary venous outflow pressure during LPS-induced coronary inflammation.     

Solution structure and characterization of the DNA-binding activity of the B3BP-Smr domain

The MutS1 protein recognizes unpaired bases and initiates mismatch repair, which are essential for high-fidelity DNA replication. The homologous MutS2 protein does not contribute to mismatch repair, but suppresses homologous recombination. MutS2 lacks the damage-recognition domain of MutS1, but contains an additional C-terminal extension: the small MutS-related (Smr) domain. This domain, which is present in both prokaryotes and eukaryotes, has previously been reported to bind to DNA and to possess nicking endonuclease activity. We determine here the solution structure of the functionally active Smr domain of the Bcl3-binding protein (also known as Nedd4-binding protein 2), a protein with unknown function that lacks other domains present in MutS proteins. The Smr domain adopts a two-layer α-β sandwich fold, which has a structural similarity to the C-terminal domain of IF3, the R3H domain, and the N-terminal domain of DNase I. The most conserved residues are located in three loops that form a contiguous, exposed, and positively charged surface with distinct sequence identity for prokaryotic and eukaryotic Smr domains. NMR titration experiments and DNA binding studies using Bcl3-binding protein-Smr domain mutants suggested that these most conserved loop regions participate in DNA binding to single-stranded/double-stranded DNA junctions. Based on the observed DNA-binding-induced multimerization, the structural similarity with both subdomains of DNase I, and the experimentally identified DNA-binding surface, we propose a model for DNA recognition by the Smr domain.     

Scale-up synthesis of lipase-catalyzed palm esters in stirred-tank reactor

Lipase-catalyzed production of palm esters by alcoholysis of palm oil with oleyl alcohol in n-hexane was performed in 2L stirred-tank reactor (STR). Investigation on the performance of reactor operation was carried out in batch mode STR with single impeller mounted on the centrally located shaft. Rushton turbine (RT) impellers provide the highest reaction yield (95.8%) at lower agitation speed as compared to AL-hydrofoil (AL-H) and 2-bladed elephant ear (EE) impellers. Homogenous enzyme particles suspension was obtained at 250 rpm by using RT impeller. At higher impeller speed, the shear effect on the enzyme particles caused by agitation has decreased the reaction performance. Palm esters reaction mixture in STR follows Newtons' law due to the linear relation between the shear stress (tau) and shear rate (dupsilon/dy). High stability of Lipozyme RM IM was observed as shown by its ability to be repeatedly used to give high percentage yield (79%) of palm esters even after 15 cycles of reaction. The process was successfully scale-up to 75 L STR (50 L working volume) based on a constant impeller tip speed approach, which gave the yield of 97.2% after 5h reaction time.     

Kinetics of kojic acid fermentation byAspergillus flavus link S44-1 using sucrose as a carbon source under different pH conditions

Kojic acid production byAspergillus flavus strain S44-1 using sucrose as a carbon source was carried out in a 250-mL shake flask and a 2-L stirred tank fermenter. For comparison, production of kojic acid using glucose, fructose and its mixture was also carried out. Kojic acid production in shake flask fermentation was 25.8 g/L using glucose as the sole carbon source, 23.6 g/L with sucrose, and 6.4 g/L from fructose. Reduced kojic acid production (13.5 g/L) was observed when a combination of glucose and fructose was used as a carbon source. The highest production of kojic acid (40.2 g/L) was obtained from 150 g/L sucrose in a 2 L fermenter, while the lowest kojic acid production (10.3 g/L) was seen in fermentation using fructose as the sole carbon source. The experimental data from batch fermentation and resuspended cell system was analysed in order to form the basis for a kinetic model of the process. An unstructured model based on logistic and Luedeking-Piret equations was found suitable to describe the growth, substrate consumption, and efficiency of kojic acid production byA. flavus in batch fermentation using sucrose. From this model, it was found that kojic acid production byA. flavus was not a growth-associated process. Fermentation without pH control (from an initial culture pH of 3.0) showed higher kojic acid production than single-phase pH-controlled fermentation (pH 2.5, 2.75, and 3.0).     

Nucleotide sequence of a chicken vitellogenin gene and derived amino acid sequence of the encoded yolk precursor protein

The gene encoding the major vitellogenin from chicken has been completely sequenced and its exon-intron organization has been established. The gene is 20,342 base-pairs long and contains 35 exons with a combined length of 5787 base-pairs. They encode the 1850-amino acid pre-peptide of vitellogenin, which is the precursor of the mature yolk proteins, the serine-rich and heavily phosphorylated phosvitin and the lipovitellin. The 217-amino acid phosvitin polypeptide occupies an internal position (residue 1112 through 1328) within the vitellogenin molecule. The 125,000 and 30,000 Mr lipovitellin polypeptides are encoded by the sequences at the N-terminal and the C-terminal sides of the phosvitin section, respectively. The main features of the gene and protein sequences, and the evolutionary implications, are discussed.     

香菇的学名及其在当代真菌分类中的位置

本文综述了香菇(Lentinula edodes)的分类历史,确认其在蘑菇目(Agaricales)Tricholomataceae科下的分类地位,并证实了它与多孔菌目(Poriales)Lentinaceae科的Lentinus属没有联系。根据《真菌、地衣汉语学名命名法规》,作者讨论了译为“香菇属”的Lentinus和“小香菇属”的Lentinellus两属的汉语学名问题,提出Lentinus的汉语学名应订正为“韧伞属”,Lentinellus为“螺壳菌属”。香菇所在的Lentinula属的汉语学名建议为“木菇属”。     

A new repetitive element of the CR1 family downstream of the chicken vitellogenin gene.

We have analyzed a repetitive DNA sequence found in the 3'-flanking region of the chicken vitellogenin gene. By its sequence, the repetitive DNA has been identified as a hitherto unreported member of the chicken CR1 family of repetitive elements. The CR1 sequence displays the structural characteristics of a long terminal repeat located at the 3' end of an avian retrovirus. The CR1 element lies 2.2 kb downstream of the vitellogenin gene and 'points' away from the gene rather than toward it. In this respect, this element differs from other CR1 repeats. The CR1 element is embedded in a region showing changes in chromatin structure implying a potential role for this sequence in determining the structural state of the local chromatin.     

Influence of head position on carotid hemodynamics in young adults

Studies in adults have shown marked changes in geometry and relative positions of the carotid arteries when rotating the head. The aim of this study was to quantify the change in geometry and analyze its effect on carotid hemodynamics as a result of head rotation. The right carotid arteries of nine young adult subjects were investigated in supine position with straight and left turned head positions, respectively. The three-dimensional (3D) carotid geometry was reconstructed by using 3D ultrasound (3D US), and the carotid hemodynamics were calculated by combining 3D US with computational fluid dynamics. It was observed that cross-sectional areas and shapes did not change markedly with head rotation, but carotid vessel center lines altered with planarification of the common carotid artery as a main feature (P < 0.05). Measured common carotid flow rates changed significantly at the individual level when the head was turned, but on the average, the change in mean common carotid flow rate was relatively small (0.37 +/- 1.11 ml/s). The effect of the altered center lines and flow rates on the atherogenic nature of the carotid bifurcation was evaluated by using calculated hemodynamic wall parameters, such as wall shear stress (WSS) and oscillatory shear index (OSI). It was found that WSS and OSI patterns changed significantly with head rotation, but the variations were very subject dependent and could not have been predicted without assessing the altered geometry and flow of the carotid bifurcation for individual cases. This study suggests that there is a need for standardization of the choice of head position in the 3D US scan protocol, and that carotid stents and emboli diverters should be studied in different head positions.