Gastrointestinal stress as innate defence against microbial attack

The human gastrointestinal (GI) tract has been bestowed with the most difficult task of protecting the underlying biological compartments from the resident commensal flora and the potential pathogens in transit through the GI tract. It has a unique environment in which several defence tactics are at play while maintaining homeostasis and health. The GI tract shows myriad number of environmental extremes, which includes pH variations, anaerobic conditions, nutrient limitations, elevated osmolarity etc., which puts a check to colonization and growth of nonfriendly microbial strains. The GI tract acts as a highly selective barrier/platform for ingested food and is the primary playground for balance between the resident and uninvited organisms. This review focuses on antimicrobial defense mechanisms of different sections of human GI tract. In addition, the protective mechanisms used by microbes to combat the human GI defence systems are also discussed. The ability to survive this innate defence mechanism determines the capability of probiotic or pathogen strains to confer health benefits or induce clinical events respectively.     

<Emphasis Type="Italic">Aspergillus flavus</Emphasis> Keratitis: Experience of a Tertiary Eye Clinic in Turkey

We investigated the clinical and mycological characteristics of four cases of mycotic keratitis caused by Aspergillus flavus that occurred from July 2014 to May 2015 at Çukurova University Hospital, Adana, Turkey. In a 10-month period, a total of 64 corneal smear/scrapings were examined from patients with suspected mycotic keratitis. Fungal cultures were positive in six of these patients, indicating a 9.4% incidence of mycotic keratitis in this region, including four cases of A. flavus and two cases of Fusarium spp. The predisposing factors, clinical presentation, and success of the therapeutic approaches were further evaluated. For all cases, topical voriconazole was the first choice of treatment. Surgical procedures were required to control infection in 3 of the 4 cases, including intrastromal voriconazole injection for two cases and keratoplasty for one case. Predisposing factors included trauma (two cases, 50%), contact lens use (one case, 25%), and previous ocular surgery (one case, 25%). The clinical presentations also differed, including a well-limited ulcer (one case), an ulcer with an irregular feathery margin (one case), and ulcers with satellite lesions (two cases). The mean duration between the time of presentation and definitive diagnosis by culture was 14 days (8–25 days). We observed that A. flavus keratitis can present with different underlying factors and clinical conditions. A combination of antifungal therapy and supportive surgical intervention may resolve infections caused by A. flavus in the cornea.     

Water saving traits co-map with a major terminal drought tolerance quantitative trait locus in pearl millet [Pennisetum glaucum (L.) R. Br.]

Low transpiration rates in pearl millet under fully irrigated conditions decrease plant water use at vegetative stage and then increase the water availability during grain filling and finally the terminal drought tolerance. Hundred and thirteen recombinant inbred lines developed from a cross between H77/833-2 and PRLT2/89-33 (terminal drought-sensitive?×?tolerant genotype) were evaluated to map transpiration rate (Tr, a proxy for canopy conductance), organ weights, leaf area and thickness and to study their interactions. Transpiration rate was increased by two H77/833-2 and two PRLT2/89-33 alleles on linkage group (LG) 2, whose importance depended on the vapor pressure deficit. The two H77/833-2 and one PRLT2/89-33 alleles co-mapped to a previously identified major terminal drought tolerance quantitative trait locus (QTL), although in a much smaller genetic interval. The other Tr allele from H77/833-2 also enhanced biomass dry weight and co-located with a formerly identified stover and tillering QTL. Leaf characteristics were linked to two loci on LG7. Plant water use was increased and decreased by different loci combinations for Tr, tillering and leaf characteristics, whose respective importance depended on the environmental conditions. Therefore, different alleles influence plant water use and have close interactions with one another and with the environment, so that different ideotypes for plant water use exist or could be designed from specific allele combinations conferring particular physiological characteristics for specific adaptation to a range of terminal drought conditions.     

Blending chitosan with polycaprolactone: effects on physicochemical and antibacterial properties

Chitosan is a well sought-after polysaccharide in biomedical applications and has been blended with various macromolecules to mitigate undesirable properties. However, the effects of blending on the unique antibacterial activity of chitosan as well as changes in fatigue and degradation properties are not well understood. The aim of this work was to evaluate the anti-bacterial properties and changes in physicochemical properties of chitosan upon blending with synthetic polyester poly(epsilon-caprolactone) (PCL). Chitosan and PCL were homogeneously dissolved in varying mass ratios in a unique 77% acetic acid in water mixture and processed into uniform membranes. When subjected to uniaxial cyclical loading in wet conditions, these membranes sustained 10 cycles of predetermined loads up to 1 MPa without break. Chitosan was anti-adhesive to Gram-positive Streptococcus mutans and Gram-negative Actinobacillus actinomycetemcomitans bacteria. Presence of PCL compromised the antibacterial property of chitosan. Four-week degradation studies in PBS/lysozyme at 37 degrees C showed initial weight loss due to chitosan after which no significant changes were observed. Molecular interactions between chitosan and PCL were investigated using Fourier transform infrared spectroscopy (FTIR) which showed no chemical bond formations in the prepared blends. Investigation by wide-angle X-ray diffraction (WAXD) indicated that the crystal structure of individual polymers was unchanged in the blends. Dynamic mechanical and thermal analysis (DMTA) indicated that the crystallinity of PCL was suppressed and its storage modulus increased with the addition of chitosan. Analysis of surface topography by atomic force microscopy (AFM) showed a significant increase in roughness of all blends relative to chitosan. Observed differences in biological and anti-bacterial properties of blends could be primarily attributed to surface topographical changes.     

Macroaffinity ligand-facilitated three-phase partitioning (MLFTPP) for purification of xylanase

It is shown that eudragit S-100, a copolymer of methylacrylic acid and methylmethacrylate, undergoes three-phase partitioning. It was found that 95% eudragit S-100 could be recovered as the interfacial precipitate by using 30% (w/v) ammonium sulfate, 1:1 ratio of t-butanol to polymer solution at 40 degrees C. Three-phase partitioning of proteins uses simultaneous addition of ammonium sulfate and t-butanol to precipitate proteins in an interfacial layer separating the aqueous phase and organic solvent. Exploiting the affinity of xylanases towards eudragit S-100, it was possible to purify xylanase from Aspergillus niger; 60% recovery of activity with 95-fold purification could be obtained by this process. The purified enzyme showed A single band on SDS-PAGE. The technique shows promise to develop into a general method that could be termed "macroaffinity ligand-facilitated three-phase partitioning (MLFTPP).     

Reference Gene Selection in Carnobacterium maltaromaticum,Lactobacillus curvatus,and Listeria innocua Subjected to Temperature and Salt Stress

Eight putative consistently expressed genes in Carnobacterium maltaromaticum and Lactobacillus curvatus, and nine in Listeria innocua, were examined for their potential as references for the normalization of gene expression. Expression stability of candidate reference genes was evaluated under growth conditions of low (5 °C) and moderately high (40–42.5 °C) temperatures, and high salt (≥3 % NaCl) using the geNormplus and NormFinder algorithms. Under temperature stress, both algorithms ranked elongation factor Tu (Tuf) as the most stably expressed gene in C. maltaromaticum. In L. curvatus, at similar conditions, geNormplus identified Tuf and 6-phosphogluconate dehydrogenase (6PGDH) as suitable for normalization, while NormFinder identified phenylalanyl-tRNA synthase and recombinase A as the best pair. In L. innocua grown under the same temperatures, geNormplus ranked 6PGDH, glyceraldehyde-3-phosphate dehydrogenase (GAPDH), and Tuf as the top three most stable references, whereas NormFinder identified GAPDH and 6PGDH as suitable for normalization, with Tuf ranked as number six. There was less consistency between algorithms in the salt stress experiment. No gene was identified that exhibited such a constant level of expression as to outperform the other candidates under both experimental conditions. This study underlines the need for normalizing bacterial gene expression using multiple carefully selected references.     

Molecular characterization of heat shock proteins 90 (HSP83?) and 70 in tropical strains of Bombyx mori

Following the concept of whole organism, we have extracted total protein from the Bombyx mori for the identification and analysis of HSPs. Expression of 90 kDa HSP in first, second and third instars, 84 kDa in fourth instar and 90‐, 84‐, 62‐, 60‐, 52‐ and 33‐kDa HSPs in fifth instar larvae of tropical polyvoltine and bivoltine silkworm strains were obvious. Further, we have combined single and 2‐DE with MALDI‐TOF for analysis of BmHSPs. Ninety kilodalton band excised from 1‐DE gel was identified as HSP83 by MALDI‐TOF‐MS. The immunoblot analysis confirmed the expression of HSP90 in all the instars larvae of B. mori. Heat shock‐induced protein spots were excised from 2‐DE gels for MALDI‐TOF‐MS analysis. The Mascot search results are for HSP68, HSC70‐1 and HSP70Ba in Pure Mysore, and major HSP70Bbb, HSP68, HSC‐3 and HSP83 in NB₄D₂. Multiple sequence alignment explicit the variations in amino acid sequence between Pure Mysore and NB₄D₂. Notably, the PMF of spot 2 matched the coding sequence of B. mori and its gene annotation was determined on chromosome 9. With this novel approach, expression of BmHSP90 was confirmed in all the instars and uncovered isoforms of BmHSP70, which provided unequivocal insight to analyze and understand the biological significance in B. mori.