Structural and biological roles of glycosylations in pulmonary angiotensin I-converting enzyme

We enzymatically deglycosylated pig lung angiotensin I-convertingenzyme (ACE) to study the involvement of its glycanic chainsin its physicochemical and catalytic properties. The effectsof endoglycosidases F₂ and H, and of N-glycanase were assessedby ACE mobility in SDS-PAGE. N-Glycanase only was completelyeffective with or without previous denaturation, leading toa shift in ACE M_r from 172 to 135 kDa; endoglycosidase F₂ producedthe same shift but only without previous denaturation. DeglycosylatedACE had the same kcat as native ACE for the substrate hippuryl-histidyl-leucine,and an identical Stokes radius as measured by size-exclusionhigh performance liquid chromatography. Neuraminidase had noeffect on ACE Stokes radius but slightly decreased its kcatwhich could be related to variations in ionization of the activesite. The isoelectric point of ACE, as, determined by isoelectricfocusing, increased from 4.5–4.8 to 5.0–5.3 aftereither endoglycosidase F₂ or neuraminidase digestion, but stillwith microheterogeneities which thus did not seem to be relatedto ACE glycans. Deglycosylated ACE did not bind onto agaroselectinsin contrast to native ACE which bound strongly to concanavalinA showing interactions involving oligomannosidic or biantennaryand sialylated N-acetyl-lactosaminic isoglycans. Finally, tunicamycin,an inhibitor of N-glycosylation, did not modify ACE secretionby endothelial cells. Thus, ACE glycans have no drastic effectson structural and biological properties of the protein, butthey may have a functional role on intracellular targeting ofboth secreted and membrane-bound ACE isoforms, also for theprotection of the soluble plasma form against hepatic lectinsand the maintenance of its hydrosolubility. converting enzyme (peptidyldipeptidase EC.3.4.15.1) endothelium glycosidases lectins     

Detailed cell cycle analysis in human lymphocytes; Application to γ-irradiated cells

Summary A method based on BrdU incorporation for analyzing in detail the kinetics of the cell cycle is described. The S phase has been subdivided into five subphases, each recognizable by their BrdU incorporation pattern at metaphase. The method can be useful for the study of abnormal cell cycles, and may have particular application in mutagenesis studies concerning the various subphases of the S phase, without using synchronization techniques. An application of the method is described, showing that -irradiation, during the course of the S phase, leads to a lack of cells which were in early S phase at the time of irradiation. This finding can be related either to a higher lethality at this stage of the cell cycle or to a delay in completion of DNA replication after irradiation.Hoider of a C.E.C. scholarship     

Sequences homologous to Tc(s) transposable elements ofCaenorhabditis elegans are widely distributed in the phylum nematoda

Summary To have a better understanding of the evolutionary history of mobile elements within the nematodes, we examined the distribution and the conservation of homologues to transposable elements fromCaenorhabditis elegans (Tc1, Tc2, Tc3, Tc4, Tc5, and FB1) in 19 nematode species belonging to the class Secernentea. Our results show that Tc1 elements display a distribution restricted to the family Rhabditidae with poor conservation. The Tc2 and FB1 homologous elements have the same patchy distribution within the Rhabditidae. They were only found inCaenorhabditis and inTeratorhabditis. The Tc3 element is widely distributed among nematode species. Tc3 homologous elements are present in the majority of the Rhabditidae but also in two genera within the family Panagrolaimidae, and inBursaphelenchus, which belongs to the order Aphelenchida. Tc4 and Tc5 homologues show the most limited distribution of all tested elements, being strictly limited toC. elegans. These data indicate that in some cases, the distribution of transposable elements in the nematode cannot be explained by strict vertical transmission. The distribution of Tc3, Tc4, and Tc5 suggests that horizontal transmission may have occurred between reproductively isolated species during their evolutionary history.     

Construction and characterisation of a yeast artificial chromosome library containing three haploid maize genome equivalents

We have constructed a yeast artificial chromosome (YAC) library using high-molecular-weight DNA prepared from agarose-embedded leaf protoplasts of the maize inbred line UE95. This library contains 79 000 clones with an average insert size of 145 kb and should therefore represent approximately three haploid genome equivalents. The library is organised as an ordered array in duplicate microtitre plates. Forty-one pools of DNA from 1920 individual clones have been prepared for rapid screening of the library by the polymerase chain reaction (PCR). Using this approach, together with conventional colony hybridisation, we have been able to identify between one and eight positive clones for every probe used.     

Visualizing Single-molecule DNA Replication with Fluorescence Microscopy

We describe a simple fluorescence microscopy-based real-time method for observing DNA replication at the single-molecule level. A circular, forked DNA template is attached to a functionalized glass coverslip and replicated extensively after introduction of replication proteins and nucleotides (Figure 1). The growing product double-strand DNA (dsDNA) is extended with laminar flow and visualized by using an intercalating dye. Measuring the position of the growing DNA end in real time allows precise determination of replication rate (Figure 2). Furthermore, the length of completed DNA products reports on the processivity of replication. This experiment can be performed very easily and rapidly and requires only a fluorescence microscope with a reasonably sensitive camera.     

Elucidating the Role of a Tetrafluoroborate‐Based Ionic Liquid at the n‐Type Oxide/Perovskite Interface

Halide perovskites are currently one of the most heavily researched emerging photovoltaic materials. Despite achieving remarkable power conversion efficiencies, perovskite solar cells have not yet achieved their full potential, with the interfaces between the perovskite and the charge‐selective layers being where most recombination losses occur. In this study, a fluorinated ionic liquid (IL) is employed to modify the perovskite/SnO₂ interface. Using Kelvin probe and photoelectron spectroscopy measurements, it is shown that depositing the perovskite onto an IL‐treated substrate results in the crystallization of a perovskite film which has a more n‐type character, evidenced by a decrease of the work function and a shift of the Fermi level toward the conduction band. Photoluminescence spectroscopy and time‐resolved microwave conductivity are used to investigate the optoelectronic properties of the perovskite grown on neat and IL‐modified surfaces and it is found that the modified substrate yields a perovskite film which exhibits an order of magnitude lower trap density than the control. When incorporated into solar cells, this interface modification results in a reduction in the current–voltage hysteresis and an improvement in device performance, with the best performing devices achieving steady‐state PCEs exceeding 20%.     

Ultraviolet Photoemission Spectroscopy and Kelvin Probe Measurements on Metal Halide Perovskites: Advantages and Pitfalls

In this essay, a case study is presented on the electronic structure of several metal halide perovskites (MHP) using Kelvin probe (KP)‐based surface photovoltage (SPV) measurements and ultraviolet photoemission spectroscopy (UPS) to demonstrate the advantages, but also the pitfalls, of using these techniques to characterize the surfaces of these materials. The first part addresses the loss of halide species from perovskite surfaces upon supragap illumination in vacuum. This has the potential to cause both a long‐term alteration of the sample work function and a modification of the KP tip during SPV measurements. If undetected, this leads to a misinterpretation of the MHP surface potential. The second part illustrates the difficulties in determining the valence band maximum (VBM) of MHP surfaces with UPS and stresses the importance of taking into account the low density of states at the VBM edge. Given this circumstance, specific care must be taken to eliminate measurement artifacts in order to ascertain the presence or absence of low densities of electronic gap states above the VBM. This essay also highlights issues such as film degradation, nonequilibrium situations (e.g., SPV), and satellite emissions, which occur during photoemission spectroscopy.     

The importance of naturally attenuated SARS-CoV-2in the fight against COVID-19

The current SARS-CoV-2 pandemic is wreaking havoc throughout the world and has rapidly become a global health emergency. A central question concerning COVID-19 is why some individuals become sick and others not. Many have pointed already at variation in risk factors between individuals. However, the variable outcome of SARS-CoV-2 infections may, at least in part, be due also to differences between the viral subspecies with which individuals are infected. A more pertinent question is how we are to overcome the current pandemic. A vaccine against SARS-CoV-2 would offer significant relief, although vaccine developers have warned that design, testing and production of vaccines may take a year if not longer. Vaccines are based on a handful of different designs (i), but the earliest vaccines were based on the live, attenuated virus. As has been the case for other viruses during earlier pandemics, SARS-CoV-2 will mutate and may naturally attenuate over time (ii). What makes the current pandemic unique is that, thanks to state-of-the-art nucleic acid sequencing technologies, we can follow in detail how SARS-CoV-2 evolves while it spreads. We argue that knowledge of naturally emerging attenuated SARS-CoV-2 variants across the globe should be of key interest in our fight against the pandemic.