Effects of the interactions between glutaraldehyde and the polymeric matrix on the efficacy of the biocide against pseudomonas fluorescens biofilms

Glutaraldehyde (GTA) is a widely used biocide due to its high effectiveness. The experimental work reported here was carried out to assess the effectiveness of GTA in controlling biofilms formed by Pseudomonas fluorescens on stainless steel slides, and to compare efficacy against both planktonic and sessile micro‐rganisms. The tests were performed using two concentrations of GTA (50 and 100mg 1^‐1), biofilms of two ages (7 and 15 d), several pH values (5,7 and 9) and a range of exposure times (from 0 (control) to 1,3,7 and 24 h). The action of GTA on biofilm and planktonic populations was assessed by means of activity tests, zeta potential, and the wet weight of the biofilms. Biofilms were not completely removed after treatment with GTA in any of the conditions studied. The higher GTA concentration was more effective in reducing the bacterial activity of the biofilm. The biocide proved to be more effective for longer exposure times. GTA showed good antimicrobial activity against P. fluorescens in suspension, with higher activity at pH 9. The findings of this study suggest that when GTA is used to control biofilms, it reacts with one of the components of the matrix, the proteins, thereby reducing its antimicrobial action.     

The effects of metabolite molecules produced by drinking water-isolated bacteria on their single and multispecies biofilms

The elucidation of the mechanisms by which diverse species survive and interact in drinking water (DW) biofilm communities may allow the identification of new biofilm control strategies. The purpose of the present study was to investigate the effects of metabolite molecules produced by bacteria isolated from DW on biofilm formation. Six opportunistic bacteria, viz. Acinetobacter calcoaceticus, Burkholderia cepacia, Methylobacterium sp., Mycobacterium mucogenicum, Sphingomonas capsulata and Staphylococcus sp. isolated from a drinking water distribution systems (DWDS) were used to form single and multispecies biofilms in the presence and absence of crude cell-free supernatants produced by the partner bacteria. Biofilms were characterized in terms of mass and metabolic activity. Additionally, several physiological aspects regulating interspecies interactions (sessile growth rates, antimicrobial activity of cell-free supernatants, and production of iron chelators) were studied to identify bacterial species with biocontrol potential in DWDS. Biofilms of Methylobacterium sp. had the highest growth rate and M. mucogenicum biofilms the lowest. Only B. cepacia was able to produce extracellular iron-chelating molecules. A. calcoaceticus, B. cepacia, Methylobacterium sp. and M. mucogenicum biofilms were strongly inhibited by crude cell-free supernatants from the other bacteria. The crude cell-free supernatants of M. mucogenicum and S. capsulata demonstrated a high potential for inhibiting the growth of counterpart biofilms. Multispecies biofilm formation was strongly inhibited in the absence of A. calcoaceticus. Only crude cell-free supernatants produced by B. cepacia and A. calcoaceticus had no inhibitory effects on multispecies biofilm formation, while metabolite molecules of M. mucogenicum showed the most significant biocontrol potential.     

Participation of the Cytoskeletal and Lysosomal Compartments in Campylobacter jejuni Invasion of Caco-2 cells, the Cellular Response by Morphometric Analysis and the Presence of Cytokine and Chemokine Transcripts

This study aimed to evaluate the participation of actin and tubulin in the process of internalisation, the interaction of bacterial phagosomes with lysosomes, the morphometric changes and the expression of inflammatory cytokines in Caco-2 cells infected with Campylobacter jejuni. Both actin and tubulin participated in the process of internalisation. Inside the cells, lysosomes fuse with phagosomes, which may lead to bacterial death because after 2 h, the bacteria were not detected by Transmission electron microscopy (TEM). There is increased expression of TGF-β3 during the early stages, and IL-8 was expressed after 60 min p.i. This work showed that C. jejuni invades and causes major morphometric changes in epithelial cells. In response, the cells increase their expression of cytokines that can lead to inflammation. The mechanisms of invasion are dependent on actin and tubulin, and once internalised, lysosomes fuse with phagosomes.     

Identification of clinical,epidemiological and laboratory risk factors for leprosy reactions during and after multidrug therapy

This cross-sectional retrospective study evaluated 440 leprosy patients; 57% (251/440) had leprosy reactions during and/or after multidrug therapy, 80.5% (202/251) of whom presented with multibacillary leprosy. At diagnosis, positive bacterial index (BI) [odds ratio (OR) = 6.39; 95% confidence interval (CI): 4.1-10.1)] or polymerase chain reaction (PCR) (OR = 9.15; 95% CI: 5.4-15.5) in skin smears, anti-phenolic glycolipid-1 (anti-PGL-1) ELISA (OR = 4.77; 95% CI: 2.9-7.9), leucocytosis (OR = 9.97; 95% CI: 3.9-25.7), thrombocytopenia (OR = 5.72; 95% CI: 2.3-14.0) and elevated lactate dehydrogenase (OR = 2.38; 95% CI: 1.4-4.0) were potential markers for the development of reactions during treatment. After treatment, positive BI (OR = 8.47; 95% CI: 4.7-15.3) and PCR (OR = 6.46; 95% CI: 3.4-12.3) in skin smears, anti-PGL-1 ELISA (OR = 2.25; 95% CI: 1.3-3.9), anaemia (OR = 2.36; 95% CI: 1.2-4.5), leucocytosis (OR = 4.14; 95% CI: 1.5-11.6) and thrombocytopenia (OR = 3.70; 95% CI: 1.3-2.2) were risk factors for the occurrence of reactions during the study period. The identification of groups with an increased risk for developing reactions will allow for the timely development of a treatment plan to prevent nerve damage and, therefore, the appearance of the disabling sequelae associated with the stigma of leprosy.     

Aeromonas molluscorum Av27 is a potential tributyltin (TBT) bioremediator: phenotypic and genotypic characterization indicates its safe application

Aeromonas molluscorum Av27 is an estuarine bacterium highly resistant to tributyltin (TBT). Also, the strain is able to degrade TBT into the less toxic compounds dibutyltin and monobutyltin. Therefore, this bacterium has potential to be employed in bioremediation processes. In this context, defining its biological safety is crucial. With that purpose a number of intrinsic characteristics, usually present/associated with virulent strains, were investigated. Few virulence factors were detected in strain Av27. For instance, a DNase gene is present, but it is not apparently expressed in vitro. Motility, adherence factor and phospholipase activity were also detected. Additionally, cytotoxicity to Vero cells was negative. Resistance to penicillin (10 μg ml^?1), amoxicillin/clavulanic acid (30 μg ml^?1) and cephalothin (30 μg ml^?1) and also to the vibriostatic agent O/129 was observed. Five plasmids (4, 7, 10, 100 kb and one greater than 100 kb) were identified. No Class I and II integrons were detected. Study of the optimal growth conditions showed that Av27 easily adapts to different environmental conditions. Overall, the results suggest that A. molluscorum Av27 can be considered safe to use to bioremediate TBT in contaminated environments.     

Indicator selection in life cycle assessment to enable decision making: issues and solutions

Purpose

With an ever increasing list of indicators available, life cycle assessment (LCA) practitioners face the challenge of effectively communicating results to decision makers. Simplification of LCA is often limited to an arbitrary selection of indicators, use of single scores by using weighted values or single attribute indicators. These solutions are less attractive to decision makers, since value judgments are introduced or multi-indicator information is lost. Normalization could be a means to narrow the list of indicators by ranking indicators vs. a reference system. This paper shows three different normalization approaches that produce very different ranking of indicators. It is explained how normalization helps maintain a multi-indicator approach while keeping the most relevant indicators, allowing effective decision making.

Methods

The approaches are illustrated on a hand dishwashing case study, using ReCiPe as the impact assessment method and taking the European population (year 2000) as the reference situation. Indicators are ranked using midpoint normalization factors, and compared to the ranking from endpoint normalization broken down by midpoint contribution.

Results and discussion

Endpoint normalization shows Resources as the most relevant area of protection for this case, closely followed by Human Health and Ecosystem. Broken down by their key driving midpoints, fossil depletion, climate change and, to a lesser extent, particulate matter formation and metal depletion, are most relevant. Midpoint normalization, however, indicates Freshwater Eutrophication, Natural Land Transformation and Toxicity indicators (marine and freshwater ecotoxicity and human toxicity) are most relevant.

Conclusions

A three-step approach based on endpoint normalization is recommended to present only the most relevant indicators, allowing more effective decision making instead of communicating all LCA indicators. The selection process breaks out the normalized endpoint results into the most contributing midpoints (relevant indicators) and reports results with midpoint level units. Bias due to lack of data completeness is less of an issue in the endpoint normalization process (compared to midpoint normalization), while midpoint results are less subject to uncertainty (compared to endpoint results). Focusing on the relevant indicators and key contributing unit processes has proven to be effective for non-LCA expert decision makers to understand, use, and communicate complex LCA results.     

Disturbances, elevation, topography and spatial proximity drive vegetation patterns along an altitudinal gradient of a top biodiversity hotspot

The correlation between vegetation patterns (species distribution and richness) and altitudinal variation has been widely reported for tropical forests, thereby providing theoretical basis for biodiversity conservation. However, this relationship may have been oversimplified, as many other factors may influence vegetation patterns, such as disturbances, topography and geographic distance. Considering these other factors, our primary question was: is there a vegetation pattern associated with substantial altitudinal variation (10–1,093 m a.s.l.) in the Atlantic Rainforest—a top hotspot for biodiversity conservation—and, if so, what are the main factors driving this pattern? We addressed this question by sampling 11 1-ha plots, applying multivariate methods, correlations and variance partitioning. The Restinga (forest on sandbanks along the coastal plains of Brazil) and a lowland area that was selectively logged 40 years ago were floristically isolated from the other plots. The maximum species richness (>200 spp. per hectare) occurred at approximately 350 m a.s.l. (submontane forest). Gaps, multiple stemmed trees, average elevation and the standard deviation of the slope significantly affected the vegetation pattern. Spatial proximity also influenced the vegetation pattern as a structuring environmental variable or via dispersal constraints. Our results clarify, for the first time, the key variables that drive species distribution and richness across a large altitudinal range within the Atlantic Rainforest.     

Antimicrobial Combinations against Pan-Resistant Acinetobacter baumannii Isolates with Different Resistance Mechanisms

The study investigated the effect of antibiotic combinations against 20 clinical isolates of A. baumannii (seven colistin-resistant and 13 colistin-susceptible) with different resistance mechanisms. Clinical data, treatment, and patient mortality were evaluated. The following methods were used: MIC, PCRs, and outer membrane protein (OMP) analysis. Synergy was investigated using the checkerboard and time-kill methods. Clonality was evaluated by PFGE. Based on clonality, the whole genome sequence of six A. baumannii isolates was analyzed. All isolates were resistant to meropenem, rifampicin, and fosfomycin. OXA-23 and OXA-143 were the most frequent carbapenemases found. Four isolates showed loss of a 43kDa OMP_. The colistin-susceptible isolates belonged to different clones and showed the highest synergistic effect with fosfomycin-amikacin. Among colistin-resistant isolates, the highest synergistic effect was observed with the combinations of colistin-rifampicin followed by colistin-vancomycin. All colistin-resistant isolates harbored bla_OXA-23-like and belonged to CC113. Clinical and demographic data were available for 18 of 20 patients. Fourteen received treatment and eight patients died during treatment. The most frequent site of infection was the blood in 13 of 14 patients. Seven patients received vancomycin plus an active drug against A. baumannii; however, mortality did not differ in this group. The synergistic effect was similar for colistin-susceptible isolates of distinct clonal origin presenting with the same resistance mechanism. Overall mortality and death during treatment was high, and despite the high synergism in vitro with vancomycin, death did not differ comparing the use or not of vancomycin plus an active drug against A. baumannii.