Axenic aerobic biofilms inhibit corrosion of SAE 1018 steel through oxygen depletion

Corrosion inhibition of SAE 1018 steel by pure-culture biofilms of Pseudomonas fragi and Escheri-chia coli DH5α has been evaluated in complex Luria-Bertani medium, seawater-mimicking medium, and modified Baar's medium at 30 °C. In batch cultures, both bacteria inhibited corrosion three to six fold compared to sterile controls, and the corrosion was comparable to that observed in anaerobic sterile media. To corroborate this result, a continuous reactor and electrochemical impedance spectroscopy were used to show that both P. fragi K and E. coli DH5α decreased the corrosion rate by 4- to 40-fold as compared to sterile controls; this matched the decrease in corrosion found with sterile medium in the absence of oxygen and with E. coli DH5α grown anaerobically. In addition, the requirement for live respiring cells was demonstrated by the increase in the corrosion rate that was observed upon killing the P. fragi K biofilm in continuous cultures, and it was shown that fermentation products do not cause an increase in corrosion. Hence, pure-culture biofilms inhibit corrosion of SAE 1018 steel by depleting oxygen at the metal surface. Received: 16 December 1996 / Received revision: 18 March 1997 / Accepted: 27 March 1997     

Corrosion inhibition by aerobic biofilms on SAE 1018 steel

Carbon steel (SAE 1018) samples were exposed to complex liquid media containing either the aerobic bacterium Pseudomonas fragi or the facultative anaerobe Escherichia coli DH5α. Compared to sterile controls, mass loss was consistently 2- to 10-fold lower in the presence of these bacteria which produce a protective biofilm. Increasing the temperature from 23 °C to 30 °C resulted in a 2- to 5-fold decrease in corrosion inhibition with P. fragi whereas the same shift in temperature resulted in a 2-fold increase in corrosion inhibition with E. coli DH5α. Corrosion observed with non-biofilm-forming Streptomyces lividans TK24 was similar to that observed in sterile media. A dead biofilm, generated in situ by adding kanamycin to an established biofilm, did not protect the metal (corrosion rates were comparable to those in the sterile control), and mass loss in cell-free, spent Luria-Bertani (LB) medium was similar to that in sterile medium. Confocal laser scanning microscopy analysis confirmed the presence of a biofilm consisting of live and dead cells embedded in a sparse glycocalyx matrix. Mass-loss measurements were consistent with microscopic observations of the metal surface after 2 weeks of exposure, indicating that uniform corrosion occurred. The biofilm was also able to withstand mild agitation (60 rpm), provided that sufficient time was given for its development. Received: 3 May 1996 / Received revision: 8 August 1996 / Accepted: 24 August 1996     

Metabolic response of Bacillus sphaericus 1593M for dual-substrate limitation in continuous and total-cell-retention cultures

A chemically defined medium has been developed to support the growth and the production of mosquito larvicidal factor(s) (MLF) of Bacillus sphaericus 1593M. On the basis of the data of steady-state continuous cultures, it has been understood that acetate can serve as a sole carbon and energy source for B. sphaericus 1593M. Utilization of acetate by B. sphaer-icus 1593M and the production of MLF are further enhanced by the addition of glutamate at low concentrations, both in steady-state continuous as well as in total-cell-retention cultures (TCRC). A two-step TCRC procedure resulted in better biomass and MLF production by B. sphaericus 1593M. It was also found that glutamate can serve as a carbon source as well as a growth factor in the presence of acetate and hence is a partially substitutable carbon source. Received: 3 January 1997 / Accepted: 31 January 1997     

Determination of pyronaridine in blood plasma by high-performance liquid chromatography for application in clinical pharmacological studies

A method is described for the determination of pyronaridine in plasma using high-performance liquid chromatography with fluorescence detection. The method involves liquid-liquid extraction with phosphate buffer (pH 6.0, 0.05 M) and diethyl ether-hexane (70:30%, v/v) and chromatographic separation on a C₁₈ column (Nucleosil, 250 × 4.6 mm I.D., 5 μm particle size) with acetonitrile-0.05 M phosphate buffer pH 6.0 (60:40%, v/v) as the mobile phase (1 ml/min) and detection by fluorescence (λ_ex = 267 nm, λ_em = 443 nm). The detector response is linear up to 1000 ng and the overall recoveries pyronaridine and quinine were 90.0 and 60.3%, respectively. The assay procedure was adequately sensitive to measure 10 ng/ml pyronaridine in plasma samples with acceptable precision (< 15% C.V.). The method was found to be suitable for use in clinical pharmacological studies.     

A new process for the treatment of fertilizer effluent using immobilized urease

A method is reported for the treatment of industrial fertilizer effluent rich in urea by a new coupling method to immobilize crude urease onto polyester which is having high flow through property in columns. Kinetics of the immobilized enzyme is established in small column. A typical treatment process with two larger columns in packed bed mode is discussed with and without recycling the treated effluent.     

Haem synthesis during mitochondrogenesis in yeast

The activities of delta-aminolaevulate synthetase and delta-aminolaevulate dehydratase have been assayed in Saccharomyces cerevisiae during glucose repression and de-repression. delta-Aminolaevulate dehydratase increased concomitantly with the increase in oxygen uptake during the de-repression phase caused by the depletion of glucose in the medium. delta-Aminolaevulate synthetase showed an oscillatory behaviour and a spurt in its activity always preceded the increase in oxygen uptake. The activity of both the enzymes was lowered if the cells were incubated with glucose or cycloheximide, but not with chloramphenicol.     

Role of secondary structure in protein-phospholipid surface interactions: reconstitution and denaturation of apolipoprotein C-I:DMPC complexes

Binding of protein to a phospholipid surface is commonly mediated by amphipathic alpha-helices. To understand the role of alpha-helical structure in protein-lipid interactions, we used discoidal lipoproteins reconstituted from dimyristoylphosphatidylcholine (DMPC) and human apolipoprotein C-I (apoC-I, 6 kDa) or its mutants containing single Pro substitutions along the sequence and differing in their alpha-helical content in solution (0-48%) and on DMPC (40-75%). Thermal denaturation revealed that lipoprotein stability correlates weakly with the protein helix content: proteins with higher alpha-helical content on DMPC may form more stable complexes. Lipoprotein reconstitution upon cooling from the heat-denatured state and DMPC clearance studies revealed that protein secondary structure in solution and on DMPC correlates strongly with the maximal temperature of lipoprotein reconstitution: more helical proteins can reconstitute lipoproteins at higher temperatures. Interestingly, at Tc = 24 degrees C of the DMPC gel-to-liquid crystal transition, the clearance rate is independent of the protein helical content. Consequently, if the packing defects at the phospholipid surface are readily available (e.g., at the lipid phase boundary), insertion of protein into these defects is independent of the secondary structure in solution. However, if hydrophobic defects are limited, protein binding and insertion are aided by other surface-bound proteins and depend on their helical propensity: the larger the propensity, the faster the binding and the broader its temperature range. This positive cooperativity in binding of alpha-helices to phospholipid surface, which may result from direct and/or lipid-mediated protein-protein interactions, may be important for lipoprotein metabolism and for protein-membrane binding.     

Mathematical model based estimation of volumetric oxygen transfer coefficient(s) in the production of proteolytic enzymes in Bacillus amyloliquefaciens

Alkaline protease is a class of important hydrolytic enzymes having wide applications in bioprocess industries. Their optimum pH in the alkaline range and stability at higher temperatures make them ideal in detergent and leather processing industries. These enzymes have excellent depilating capacity. The present study aims at process optimization for the production of alkaline protease from Bacillus amyloliquefaciens ATCC 23844. Information on the optimal operating temperature and pH were elicited from specific growth rates and alkaline protease yields. It was also observed that besides pH and temperature, the oxygen transfer rate is another important limiting variable for the production of protease. Volumetric oxygen transfer coefficient (k _L a) was estimated at various impeller speeds and aeration rates. The optimal impeller speed and aeration rates were determined from k _L a and the relative protease yield data. It was understood that the oxygen transfer rate is one of the crucial parameters for the production of proteolytic enzymes by B. amyloliquefaciens.     

Binding of nucleotide triphosphates to cardiotoxin analogue II from the Taiwan cobra venom (Naja naja atra). Elucidation of the structural interactions in the dATP-cardiotoxin analogue ii complex.

Snake venom cardiotoxins have been recently shown to block the enzymatic activity of phospholipid protein kinase and Na+,K+-ATPase. To understand the molecular basis for the inhibitory effects of cardiotoxin on the action of these enzymes, the nucleotide triphosphate binding ability of cardiotoxin analogue II (CTX II) from the Taiwan cobra (Naja naja atra) venom is investigated using a variety of spectroscopic techniques such as fluorescence, circular dichroism, and two-dimensional NMR. CTX II is found to bind to all the four nucleotide triphosphates (ATP, UTP, GTP, and CTP) with similar affinity. Detailed studies of the binding of dATP to CTX II indicated that the toxin molecule is significantly stabilized in the presence of the nucleotide. Molecular modeling, based on the NOEs observed for the dATP.CTX II complex, reveals that dATP binds to the CTX II molecule at the groove enclosed between the N- and C-terminal ends of the toxin molecule. Based on the results obtained in the present study, a molecular mechanism to account for the inhibition of the enzymatic activity of the phospholipid-sensitive protein kinase and Na+,K+-ATPase is also proposed.