MVL-PLA2, a Snake Venom Phospholipase A2, Inhibits Angiogenesis through an Increase in Microtubule Dynamics and Disorganization of Focal Adhesions

Integrins are essential protagonists of the complex multi-step process of angiogenesis that has now become a major target for the development of anticancer therapies. We recently reported and characterized that MVL-PLA2, a novel phospholipase A2 from Macrovipera lebetina venom, exhibited anti-integrin activity. In this study, we show that MVL-PLA2 also displays potent anti-angiogenic properties. This phospholipase A2 inhibited adhesion and migration of human microvascular-endothelial cells (HMEC-1) in a dose-dependent manner without being cytotoxic. Using Matrigel™ and chick chorioallantoic membrane assays, we demonstrated that MVL-PLA2, as well as its catalytically inactivated form, significantly inhibited angiogenesis both in vitro and in vivo. We have also found that the actin cytoskeleton and the distribution of αvβ3 integrin, a critical regulator of angiogenesis and a major component of focal adhesions, were disturbed after MVL-PLA2 treatment. In order to further investigate the mechanism of action of this protein on endothelial cells, we analyzed the dynamic instability behavior of microtubules in living endothelial cells. Interestingly, we showed that MVL-PLA2 significantly increased microtubule dynamicity in HMEC-1 cells by 40%. We propose that the enhancement of microtubule dynamics may explain the alterations in the formation of focal adhesions, leading to inhibition of cell adhesion and migration.     

Reassessing culture media and critical metabolites that affect adenovirus production

Adenovirus production is currently operated at low cell density because infection at high cell densities still results in reduced cell‐specific productivity. To better understand nutrient limitation and inhibitory metabolites causing the reduction of specific yields at high cell densities, adenovirus production in HEK 293 cultures using NSFM 13 and CD 293 media were evaluated. For cultures using NSFM 13 medium, the cell‐specific productivity decreased from 3,400 to 150 vp/cell (or 96% reduction) when the cell density at infection was increased from 1 to 3 × 10⁶ cells/mL. In comparison, only 50% of reduction in the cell‐specific productivity was observed under the same conditions for cultures using CD 293 medium. The effect of medium osmolality was found critical on viral production. Media were adjusted to an optimal osmolality of 290 mOsm/kg to facilitate comparison. Amino acids were not critical limiting factors. Potential limiting nutrients including vitamins, energy metabolites, bases and nucleotides, or inhibitory metabolites (lactate and ammonia) were supplemented to infected cultures to further investigate their effect on the adenovirus production. Accumulation of lactate and ammonia in a culture infected at 3 × 10⁶ cells/mL contributed to about 20% reduction of the adenovirus production yield, whereas nutrient limitation appeared primarily responsible for the decline in the viral production when NSFM 13 medium was used. Overall, the results indicate that multiple factors contribute to limiting the specific production yield at cell densities beyond 1 × 10⁶ cells/mL and underline the need to further investigate and develop media for better adenoviral vector productions. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

The arthrobacter arilaitensis Re117 genome sequence reveals its genetic adaptation to the surface of cheese

Arthrobacter arilaitensis is one of the major bacterial species found at the surface of cheeses, especially in smear-ripened cheeses, where it contributes to the typical colour, flavour and texture properties of the final product. The A. arilaitensis Re117 genome is composed of a 3,859,257 bp chromosome and two plasmids of 50,407 and 8,528 bp. The chromosome shares large regions of synteny with the chromosomes of three environmental Arthrobacter strains for which genome sequences are available: A. aurescens TC1, A. chlorophenolicus A6 and Arthrobacter sp. FB24. In contrast however, 4.92% of the A. arilaitensis chromosome is composed of ISs elements, a portion that is at least 15 fold higher than for the other Arthrobacter strains. Comparative genomic analyses reveal an extensive loss of genes associated with catabolic activities, presumably as a result of adaptation to the properties of the cheese surface habitat. Like the environmental Arthrobacter strains, A. arilaitensis Re117 is well-equipped with enzymes required for the catabolism of major carbon substrates present at cheese surfaces such as fatty acids, amino acids and lactic acid. However, A. arilaitensis has several specificities which seem to be linked to its adaptation to its particular niche. These include the ability to catabolize D-galactonate, a high number of glycine betaine and related osmolyte transporters, two siderophore biosynthesis gene clusters and a high number of Fe(3+)/siderophore transport systems. In model cheese experiments, addition of small amounts of iron strongly stimulated the growth of A. arilaitensis, indicating that cheese is a highly iron-restricted medium. We suggest that there is a strong selective pressure at the surface of cheese for strains with efficient iron acquisition and salt-tolerance systems together with abilities to catabolize substrates such as lactic acid, lipids and amino acids.     

Finite element modeling of superelastic nickel–titanium orthodontic wires

Thanks to its good corrosion resistance and biocompatibility, superelastic Ni–Ti wire alloys have been successfully used in orthodontic treatment. Therefore, it is important to quantify and evaluate the level of orthodontic force applied to the bracket and teeth in order to achieve tooth movement. In this study, three dimensional finite element models with a Gibbs-potential-based-formulation and thermodynamic principles were used. The aim was to evaluate the influence of possible intraoral temperature differences on the forces exerted by NiTi orthodontic arch wires with different cross sectional shapes and sizes. The prediction made by this phenomenological model, for superelastic tensile and bending tests, shows good agreement with the experimental data. A bending test is simulated to study the force variation of an orthodontic NiTi arch wire when it loaded up to the deflection of 3 mm, for this task one half of the arch wire and the 3 adjacent brackets were modeled. The results showed that the stress required for the martensite transformation increases with the increase of cross-sectional dimensions and temperature. Associated with this increase in stress, the plateau of this transformation becomes steeper. In addition, the area of the mechanical hysteresis, measured as the difference between the forces of the upper and lower plateau, increases.     

Effects of magnesium deficiency on photosynthesis and carbohydrate partitioning

Magnesium nutrition is often forgotten, while its absence adversely affects numerous functions in plants. Magnesium deficiency is a growing concern for crop production frequently observed in lateritic and leached acid soils. Competition with other cations (Ca²⁺, Na⁺, and K⁺) is also found to be an essential factor, inducing magnesium deficiency in plants. This nutrient is required for chlorophyll formation and plays a key role in photosynthetic activity. Moreover, it is involved in carbohydrate transport from source-to-sink organs. Hence, sugar accumulation in leaves that results from the impairment of their transport in phloem is considered as an early response to Mg deficiency. The most visible effect is often recorded in root growth, resulting in a significant reduction of root/shoot ratio. Carbohydrate accumulation in source leaves is attributed to the unique chemical proprieties of magnesium. As magnesium is a nutrient with high mobility in plants, it is preferentially transported to source leaves to prevent severe declines in photosynthetic activity. In addition, Mg is involved in the source-to-sink transport of carbohydrates. Hence, an inverse relationship between Mg shortage and sugar accumulation in leaves is often observed. We hereby review all these aspects with a special emphasis on the role of Mg in photosynthesis and the structural and functional effects of its deficiency on the photosynthetic apparatus.     

Fundamental Understanding and Material Challenges in Rechargeable Nonaqueous Li–O2 Batteries: Recent Progress and Perspective

Energy storage challenges have triggered growing interest in various battery technologies and electrocatalysis. As a particularly promising variety, the Li–O₂ battery with an extremely high energy density is of great significance, offering tremendous opportunities to improve cell performance via understanding catalytic mechanisms and the exploration of new materials. Furthermore, focus on nonaqueous electrolyte‐based Li–O₂ batteries has markedly intensified since there could be a higher probability of commercialization, compared to that of solid‐state or aqueous electrolytes. The recent advancements of the nonaqueous Li–O₂ battery in terms of fundamental understanding and material challenges, including electrolyte stability, water effect, and noncarbon cathode materials are summarized in this review. Further, the current status of water impact on discharge products, possible mechanisms, and parasitic reactions in nonaqueous electrolytes are reviewed for the first time. The key challenges of noncarbon oxygen electrode materials, such as noble metals and metal oxides‐based cathodes, transition metals, transition metal compounds (carbides, oxides) based cathodes as well as noncarbon supported catalysts are discussed. This review concludes with a perspective on future research directions for nonaqueous Li–O₂ batteries.     

Induction of systemic resistance in chickpea against Fusarium wilt by Bacillus strains

Plant growth promoting rhizobacteria (PGPR) strains Rb29 (B. amyloliquefaciens MF352007), Bs1 (B. subtilis MF352017) and Bt1 (B. tequilensis MF352019) were tested for growth promotion and for their ability to induce systemic resistance against Fusarium wilt, a vascular disease of chickpea, using two methods that include whole plant and a split-root system. Bacillus strains and Fusarium oxysporum f. sp. ciceris (FOC) were inoculated on separate halves of roots of chickpea seedlings at the same time and then planted in separate pots either in superposition or one side of the other. All Bacillus strains systemically induced resistance against FOC, and significantly (p < 0.05) reduced the wilt disease by 98–100%. Application of Bacillus strains effectively enhanced plant growth, leading to increased plant height, root length, a fresh and dry weight of shoots and roots. These results help to explain the role of strains of Bacillus in growth promotion and biological control of Fusarium wilt in chickpea. This is the first report of systemic-induced resistance against Fusarium wilt in chickpea obtained by application of Bacillus strains to a root system spatially separated from the FOC-inoculated root.