First report on natural infection of the Phlebotomus tobbi by Leishmania infantum in northwestern Iran

Visceral leishmaniasis (VL) is an important health problem in Ardebil, where it borders Azerbaijan in the northwestern Iran. In spite of the presence of both cutaneous and visceral leishmaniasis (CL and VL) in northwestern Iran, previous researches have consistently revealed the etiologic agent of VL in the region to be Leishmania infantum. This is the first report of natural infection of Phlebotomus tobbi with L. infantum in Bilesavar district in the northern part of Ardebil province bordering Azerbaijan. Polymerase chain reaction (PCR) of kDNA, ITS1-rDNA, and CPB genes of the parasite followed by restriction fragment length polymorphism (RFLP) and gene sequencing analyses revealed presence of L. infantum in six out of 433 tested female sand fly specimens. Although sand flies of P. tobbi were infrequent, two out of 32 (6.25%) females captured in the area were found infected with the parasite. Phlebotomus perfiliewi transcaucasicus, the known vector of VL in the area, were the most dominant species but only four out of 273 (1.47%) tested were infected with L. infantum. This study showed that P. tobbi similar to P. perfiliewi transcaucasicus could play a significant role in the transmission of the L. infantum. However more investigations are needed to demonstrate that L. infantum is the only species circulating in the focus.     

A Comprehensive Study of the Polypropylene Fiber Reinforced Fly Ash Based Geopolymer

As a cementitious material, geopolymers show a high quasi-brittle behavior and a relatively low fracture energy. To overcome such a weakness, incorporation of fibers to a brittle matrix is a well-known technique to enhance the flexural properties. This study comprehensively evaluates the short and long term impacts of different volume percentages of polypropylene fiber (PPF) reinforcement on fly ash based geopolymer composites. Different characteristics of the composite were compared at fresh state by flow measurement and hardened state by variation of shrinkage over time to assess the response of composites under flexural and compressive load conditions. The fiber-matrix interface, fiber surface and toughening mechanisms were assessed using field emission scan electron microscopy (FESEM) and atomic force microscopy (AFM). The results show that incorporation of PPF up to 3 wt % into the geopolymer paste reduces the shrinkage and enhances the energy absorption of the composites. While, it might reduce the ultimate flexural and compressive strength of the material depending on fiber content.     

Iranian homograft heart valves: assessment of durability and late outcome

Durability and the rate of complications of homograft heart valves, adjusted for patient-related contributors and surgical techniques, rely mainly on the quality of allografts which in turn are mirrored in the donor characteristics and most importantly recovery and processing procedures. Aimed to assess the quality, a study was conducted to figure out the durability and late outcome following homograft replacement with valved conduits procured by the Iranian Tissue Bank. Retrospectively, the pre-implantation, perioperative and follow-up data of 400 non-consecutive recipients of cryopreserved heart valves (222 pulmonary and 178 aortic) from 2006 to 2015 were collected and analyzed in terms of variables reflecting late outcome including adverse events and durability. In the context of durability, the event of interest was defined as the need for homograft replacement and homograft-related death. The mean follow-up time (SD) of study entrants (male/female ratio, 1.4) was 49.8 (36.3) months. Median age at the time of implantation was 11 years. Total 10-years mortality was 21 % (84/400), including 66.7 % early (30-days mortality: 56/84) and 33.3 % late (28/84). Overall late complication rate was 2 %. Median survival time was 120 months (95 % CI 83.3–156.6). The pulmonary valves appeared to be more durable (P value <0.001) and survival probabilities in small sized grafts were lower (P value 0.008). One-, five-, and ten-year graft survival was 82, 76 and 73 %, respectively. The evidences suggest that the homografts function satisfactory with low rate of late complications; nevertheless, more emphasis should be given to make long-term durability comparable.     

Structure-based design,synthesis, molecular docking study and biological evaluation of 1,2,4-triazine derivatives acting as COX/15-LOX inhibitors with anti-oxidant activities

A set of 1,2,4-triazine derivatives were designed as cyclooxygenase-2 (COX-2) inhibitors. These compounds were synthesized and screened for inhibition of cyclooxygenases (COX-1 and COX-2) based on a cellular assay using human whole blood (HWB) and lipoxygenase (LOX-15) that are key enzymes in in?ammation. The results showed that 3-(2-(benzo[d][1,3]dioxol-5-ylmethylene)hydrazinyl)-5,6-bis(4-methoxyphenyl)-1,2,4-triazine (G11) was identified as the most potent COX-2 inhibitor (78%) relative to COX-1 (50%). Ferric reducing anti-oxidant power (FRAP) assay revealed that compound G10 possesses the highest anti-oxidant activity. The compound G3 with IC₅₀ value of 124?μM was the most potent compound in LOX inhibitory assay. Molecular docking was performed and a good agreement was observed between computational and experimental results.     

Microsatellite analysis of Damask rose (<Emphasis Type="Italic">Rosa damascena</Emphasis> Mill.) accessions from various regions in Iran reveals multiple genotypes

Background  

Damask roses (Rosa damascena Mill.) are mainly used for essential oil production. Previous studies have indicated that all production material in Bulgaria and Turkey consists of only one genotype. Nine polymorphic microsatellite markers were used to analyze the genetic diversity of 40 accessions of R. damascena collected across major and minor rose oil production areas in Iran.     

Viscoelastic characterization and modeling of gelation kinetics of injectable in situ cross-linkable poly(lactide-co-ethylene oxide-co-fumarate) hydrogels

Cell transplantation by injection of biodegradable hydrogels is a recently developed strategy for the treatment of degenerated tissues. A cell carrier should be cytocompatible, have suitable working time and rheological properties for injection, and harden in situ to attain dimensional stability and the desired mechanical strength. Hydrophilic macromer/cross-linker polymerizing systems, due to the relatively high molecular weight of the macromer and its inability to cross the cell membrane, are very attractive as injectable cell carriers. The objective of this research was to determine the effects of cross-linker, initiator, and accelerator concentrations on the gelation kinetics and ultimate modulus of a biodegradable, in situ cross-linkable poly(lactide-co-ethylene oxide-co-fumarate) (PLEOF) macromer. The in situ polymerizing mixture consisted of PLEOF macromer, methylene bisacrylamide cross-linker, and a neutral redox initiation system of ammonium persulfate initiator and tetramethylethylenediamine accelerator. Measurement of the time evolution of the viscoelastic properties of the network during the sol-gel transition showed the important influence of each component on the gel time and stiffness of the hydrogels. A kinetic model was developed to predict the modulus as a function of composition. Model predictions were consistent with most of the experimental findings. The values of the storage and loss moduli at the gel point were found to be approximately equal for samples with equal PLEOF concentrations, resulting in a simple method to predict the gelation time based on the Winter--Chambon criterion, with the use of the proposed kinetic model. The results of this study can be coupled with component cytocompatibility measurements to predict the effect of composition on the viability of the cells encapsulated in the hydrogel matrix.     

Isolation and characterization of polyphenol oxidase- and peroxidase-producing <Emphasis Type="Italic">Bacillus</Emphasis> strains from fully fermented tea (<Emphasis Type="Italic">Camellia sinensis</Emphasis>)

Sixteen aerobic endospore-forming Bacillus spp. were isolated from fully fermented tea leaf samples from 10 tea factories in Lahijan and Langrod cities (Gillan province, Iran). Bacillus spp. isolates were characterized using phenotypic characteristics, antibiotic susceptibility and cellular fatty acid (CFA) patterns. Based on the data obtained, five isolates of tea Bacillus spp. (TB): TB2, TB4, TB6, TB10 and TB12 belonged to the species B. subtilis. Two isolates, TB1 and TB14 were recognized as B. licheniformis. Two Bacillus spp. isolates, TB9 and TB 16 were identified as B. sphaericus. Two isolates, TB5 and TB13 were shown to be B. pumilus. Two isolates, TB7 and TB15 belonged to B. cereus. Amongst the isolates, Bacillus sp. TB3, Bacillus sp. TB8 and Bacillus sp. TB11 showed different phenotypic traits, distinct antibiotic sensitivity and fatty acid profiles, and they may represent novel species. The isolates showed polyphenol oxidase (tyrosinase) and peroxidase activities. The highest polyphenol oxidase and peroxidase activities were observed for Bacillus sp. TB3 and B. licheniformis TB14, respectively, where values of 5.48 and 3.73 units mL⁻¹ were observed.