New preparation techniques for molecular and in‐situ analysis of ancient organic micro‐ and nanostructures

Organic microfossils preserved in three dimensions in transparent mineral matrices such as cherts/quartzites, phosphates, or carbonates are best studied in petrographic thin sections. Moreover, microscale mass spectrometry techniques commonly require flat, polished surfaces to minimize analytical bias. However, contamination by epoxy resin in traditional petrographic sections is problematic for the geochemical study of the kerogen in these microfossils and more generally for the in situ analysis of fossil organic matter. Here, we show that epoxy contamination has a molecular signature that is difficult to distinguish from kerogen with time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS). This contamination appears pervasive in organic microstructures embedded in micro‐ to nano‐crystalline carbonate. To solve this problem, a new semi‐thin section preparation protocol without resin medium was developed for micro‐ to nanoscale in situ investigation of insoluble organic matter. We show that these sections are suited for microscopic observation of Proterozoic microfossils in cherts. ToF‐SIMS reveals that these sections are free of pollution after final removal of a <10 nm layer of contamination using low‐dose ion sputtering. ToF‐SIMS maps of fragments from aliphatic and aromatic molecules and organic sulfur are correlated with the spatial distribution of organic microlaminae in a Jurassic stromatolite. Hydrocarbon‐derived ions also appeared correlated with kerogenous microstructures in Archean cherts. These developments in analytical procedures should help future investigations of organic matter and in particular, microfossils, by allowing the spatial correlation of microscopy, spectroscopy, precise isotopic microanalyses, and novel molecular microanalyses such as ToF‐SIMS.     

Establishment and in vitro morphogenesis of sapucaia explants (Lecythidaceae)

Lecythis pisonis Cambess, popularly known as sapucaia, has great economic and socio-environmental potential. The objective of this study was to evaluate the establishment and in vitro morphogenesis of L. pisonis under the effect of disinfecting agents, plant growth regulators, and thermal stress. The study was divided into three experiments: (i) development of the disinfection protocol by testing different concentrations and times of exposure to sodium hypochlorite (NaOCl) and different concentrations and methods of amoxicillin application, (ii) in vitro budding induction by testing different concentrations of 6-benzylaminopurine (BAP) or kinetin (KIN) supplemented to Woody Plant Medium (WPM) and Murashige and Skoog (MS) culture media, and (iii) in vitro formation from plantlets by analyzing different concentrations of indole-3-butyric acid (IBA) with different exposure times to a thermal stress of 40°C. The disinfection of stem segments was effective using 3% NaOCl and 3.0 g L⁻¹ amoxicillin solution. MS culture medium supplemented with 0.25 mg L⁻¹ BAP induced more shoots in vitro. One milligram per liter IBA promoted greater rooting in vitro, and it is not necessary for thermal stress tolerance.

     

Effect of hydrophobicity degree of polymer particles on lipase immobilization and on biocatalyst performance

Abstract

Many studies describe the advantages of using hydrophobic particles on lipase immobilisation. However, many of these works neglect the effect of other variables of the supports, such as specific area and porosity, on the biocatalyst performance, and do not evaluate the influence of the hydrophobicity level of the particles on the biocatalysts’ activity as a single variable. Thus, the focus of the present work was to evaluate the effect of the hydrophobicity degree of polymeric particles on the biocatalysts’ activities, mitigating the influence of other variables. The study was divided into two steps. Firstly, distinct particles, exhibiting different composition and hydrophobicity levels, were used for the immobilization of a commercial lipase B from Candida antarctica (CAL-B). Then, distinct core-shell polymeric particles presenting different functional compounds on the surface were produced, using as comonomers styrene, divinylbenzene, 1-octene, vinylbenzoate and cardanol. Such particles were subsequently used for CAL-B immobilisation and the performance of the biocatalysts was evaluated on hydrolysis (using p-nitrophenyl laurate, as substrate) and esterification (using ethanol and oleic acid, as substrate) reactions. Based on the screening step, it was observed that for non-porous particles the correlation coefficients between the hydrophobicity level of the supports and the biocatalysts performance, for both hydrolysis and esterification reactions, were very low (0.32 and 0.45, respectively). It highlights that there was no significant correlation between these variables and that, probably, the chemical composition of the polymeric chains affects more significantly the biocatalyst performance. Then, analysing the subsequent stage, it was observed that small changes in the surface composition of the core-shell particles result in significant changes on the textural properties of the supports (specific area ranging from 1.2?m².g^?1 to 18.3?m².g^?1; and contact angles ranging from 71° (hydrophilic particles) to 92° (hydrophobic supports) when polymer films were put in contact with water). Such particles were also employed on CAL-B immobilization and it was noticed that higher correlation coefficients were achieved for hydrolysis (ρ?=?0.53) and esterification (ρ?=?0.74) reactions. Therefore, it is shown that the hydrophobicity degree of such supports starts to affect more effectively the biocatalysts performance when other textural features of the supports become more significant, such as specific area and porosity.     

Metals and arsenic in marine fish commercialized in the NE Brazil: Risk to human health

Abstract

Arsenic, cadmium, lead, and mercury in fish is the result of long-term biomagnification in the food chain and is of public concern, due to the toxicity they engender. The objective of this research was to determine the concentrations of arsenic, cadmium, lead, and mercury in 13 species of marine fish broadly commercialized in Aracaju, SE, Brazil and to evaluate the risks of fish consumption associated with these trace elements, using the Target Hazard Quotient (THQ). As, Cd, and Pb levels were measured with inductively coupled plasma mass spectrometry (ICP-MS), and mercury was analyzed via cold vapor atomic absorption spectrometry. The results indicate a large variability in concentrations for arsenic (0.07–2.03?mg kg^–1) and mercury (0.01–1.44?mg kg^–1), associated with the animal dietary category. Cadmium (0.04–0.19?mg kg^–1) and lead (<0.01–0.45?mg kg^–1), on the other hand showed a mild variability. None of the evaluated specimens had As, Cd, and Pb THQ values higher than 1. The THQ values for mercury were higher but indicated no consumption risk, except for amberjack, and snook fish. Overall THQ indicates lower risk of consumption in fish that are at the base of the food chain, than in those that are top predators.     

The copulatory apparatus of the marine gastropod Haminella solitaria (Heterobranchia: Cephalaspidea) and its phylogenetic relevance

The hermaphroditic marine snail species Haminella solitaria was formerly included in the genus Haminoea, but it was recently assigned to the genus Haminella. The copulatory apparatus in H. solitaria was investigated by light and transmission electron microscopy to obtain additional information about this apparatus in cephalaspidean gastropods and to evaluate the taxonomic relevance of its morphofunctional features in the framework of a new phylogenetic tree of the family Haminoeidae. The copulatory apparatus in H. solitaria consisted of the atrium with a muscular wall and papilla, a seminal duct, and a single‐lobed prostate. Epithelial and subepithelial secretory cells were detected in the proximal and middle region of the atrium wall, and a third type of secretory cell occurred in the distal region of the muscular papilla. The seminal duct was lined by ciliated cells and its muscular wall included some vacuolar cells. The prostate in H. solitaria consisted of lateral pouches surrounding a large central lumen that was filled with spermatozoa. A single type of secretory cell intermingled with ciliated cells formed the epithelium of the prostate. A histological comparison between the copulatory apparatus in H. solitaria and Haminoea navicula revealed substantial differences that support the placement of these two species in different genera, as established by recent molecular studies.     

Exploring Beneficial/Virulence Properties of Two Dairy-Related Strains of Streptococcus infantarius subsp. infantarius

The genus Streptococcus includes various species, remarkably different in their behavior, applications, virulence, and safety. Taxonomically Streptococcus infantarius subsp. infantarius belonging to the Streptococcus bovis group, which includes several pathogen species, however, has been found as predominant species in some African dairy products that are widely consumed and considered to be safe. Streptococcus infantarius subsp. infantarius’ safety may be questioned due to the association of this species with clinical cases. In this study, isolates from dairy origin were selected based on their bacteriocinogenic potential and differentiated by their RAPD-PCR profiles. Two strains were identified by 16S rRNA sequencing as St. infantarius subsp. infantarius and investigated regarding their potential beneficial properties and factors related to virulence and safety. A series of in vitro tests included properties related to survival in the gastrointestinal tract and beneficial intestinal activities. Production of bacteriocin/s, detection of related genes, and partial characterization of expressed antimicrobial protein were evaluated. Genes related to folate biosynthesis were detected in both studied strains. Evaluation of physiological tests related to strains virulence, adhesion, and resistance to antibiotics and detections of virulence and biogenic amines production-related genes were also investigated. Taking in consideration all the aspects of the specific nature of St. infantarius subsp. infantarius K1–4 and K5–1 (beneficial properties and virulence characteristics), both strains cannot be considered safe for human or other animals application, even though they have been isolated from dairy products. This study is highlighting the importance of evaluation for presence of potential virulence factors in newly characterized strains in order to be confident in their safety.

     

Nucleic Acid Tools for Invasive Fungal Disease Diagnosis

Current Fungal Infection Reports - This review has incorporated the knowledge and experience of the leads of each of the laboratory working parties of the fungal PCR initiative in order to provide...     

Diagrammatic scale for severity evaluation of the Eremanthus erythropappus–Puccinia velata pathosystem

Candeia (Eremanthus erythropappus (DC.) MacLeish), a native forest species from South America, has garnered commercial interest due to its production of essential oil that contains alpha-bisabolol. This compound is widely used in the pharmaceutical and cosmetics industry, with approximately 80% of Brazilian production being exported. Since candeia rust (Puccinia velata) has only been reported in Brazil, little is known about its epidemiology and control. There is no methodology to quantify rust severity in candeia, justifying the elaboration and validation of a diagrammatic scale containing eight levels of disease severity based on leaf area coverage (0.25%, 0.5%, 1%, 2%, 4%, 8%, 16% and 32%). In a natural sampling of disease in the field, 95% of the leaves showed severity below 16%, with the remaining 5% showing severities between 16% and 32% of leaf area. Validation of the proposed diagrammatic scale was performed by assessing the results from 10 inexperienced evaluators, performing evaluations of three leaves with different severity levels. The evaluations were performed at 7-day intervals; in the first instance, severity values were assigned without the diagrammatic scale, and for the second attempt, the scale proposed in this study was used. The accuracy and precision of the severity estimates produced by each evaluator compared to the real severity was analysed by linear regression and by Lin's statistics. The reproducibility of the estimates was evaluated by analysing the coefficient of determination of linear regressions by pairs of evaluators. The scale provided adequate levels of accuracy, precision, repeatability and reproducibility, indicating the proposed scale was a suitable method for quantifying the severity of candeia rust.