Polygalacturonase activity and variation in ripening of papaya fruit with tissue depth and heat treatment

Effects of tissue position (viz. outer vs inner mesocarp) and heat treatment (48°C, 20 min) on variations in polygalacturonase (EC 3.2.1.15 and EC 3.2.1.67) activity and ripening of fruits of Carica papaya L. cv. Backcross Solo were investigated. Polygalacturonase activity increased during ripening concomitantly with an increase in tissue softness and soluble polyuronide level. Throughout ripening, inner mesocarp tissue was softer and contained higher polygalacturonase activity than outer mesocarp tissue. Titratable acidity as well as ß-galactosidase (EC 3.2.1.23) activity also increased during ripening; however, unlike polygalacturonase, their level or activity was lower in inner than in outer mesocarp. Ascorbic acid could partially account for the increase in titratable acidity during ripening but contributed very little to the differences in titratable acid levels between outer and inner mesocarp. Heat treatment had no effect on either fruit softness or titratable acidity, but it markedly reduced the increase in ascorbic acid and polygalacturonase activity during ripening. Ripening, as reflected by changes in tissue softness and polygalacturonase activity, progressed outwardly from the interior towards the exterior of the fruit. The effect of heat treatment in suppressing polygalacturonase activity was relatively greater in inner than in outer mesocarp, suggesting that sensitivity of the enzyme to heat treatment may vary with stage of ripeness of the tissue.     

A pump/leak/buffer model for plant nitrate uptake

A simple simulation model is described to account for the rates at which plants take up nitrate and reduce it to protein. It is based on the pump and leak principle, with the pump working at a constant rate per unit sap volume provided that there is an adequate concentration of nitrate at the root surface. The rate of leakage is assumed to be proportional to the concentration difference between the inside and the outside of the plant. Nitrogen is removed from the plant nitrate pool (the buffer) at a constant fraction of the photosynthesis rate. When applied to data for the diurnal variation in nitrate uptake by ryegrass, the model predicts an uptake pattern similar to that actually observed, with a time lag of about 5 hours between photosynthesis and uptake.     

Thermotolerance of isolated mitochondria associated with heat shock proteins

Mitochondria isolated from 2-day-old etiolated soybean (Glycine max) seedlings which had been subjected to various heat shock treatments, i.e. (A) 28°C (2 h), (B) 38°C (2 h), (C) 38°C (2 h)-42.5°C (0.5 h), and (D) 38°C (2 h)-42.5°C (0.5 h)-28°C (4 h), were monitored for O₂ uptake using an oxygen electrode. Mitochondria isolated after all four heat shock treatments were active in O₂ consumption at 28°C in response to succinate and ADP (derived P/O ratios were 1.6, 1.7, 1.3, and 1.3, respectively.) The mitochondria from all four treatments were also active in O₂ uptake at 42.5°C. However, only mitochondria isolated after treatment (C) were tightly coupling at 42.5°C (derived ADP/O ratio was about 1.4). Combined with our earlier findings on the subcellular localization of heat shock proteins, our present data demonstrate that association of heat shock proteins with mitochondria by treatment (C) enables them to phosphorylate at 42.5°C (i.e. they become thermotolerant). Isolated mitochondria from treatment (C) and treatment (A) were compared by electron microscopy. They appeared to be very similar and no significant ultrastructural differences were noted.     

Cloning and Expression of a Schwanniomyces occidentalis alpha-Amylase Gene in Saccharomyces cerevisiae

An alpha-amylase gene (AMY) was cloned from Schwanniomyces occidentalis CCRC 21164 into Saccharomyces cerevisiae AH22 by inserting Sau3AI-generated DNA fragments into the BamHI site of YEp16. The 5-kilobase insert was shown to direct the synthesis of alpha-amylase. After subclones containing various lengths of restricted fragments were screened, a 3.4-kilobase fragment of the donor strain DNA was found to be sufficient for alpha-amylase synthesis. The concentration of alpha-amylase in culture broth produced by the S. cerevisiae transformants was about 1.5 times higher than that of the gene donor strain. The secreted alpha-amylase was shown to be indistinguishable from that of Schwanniomyces occidentalis on the basis of molecular weight and enzyme properties.     

Studies on the mechanism of action of a bilayer stabilizing inhibitor of protein kinase C: Cholesterylphosphoryldimethylethanolamine

Cholesterylphosphoryldimethylethanolamine is a zwitterionic compound which is a good bilayer stabilizer. As has been found with many other compounds having these properties, cholesterylphosphoryldimethylethanolamine is found to be a potent inhibitor of protein kinase C in both vesicle and micelle assay systems. The kinetics of the inhibition in Triton X-100 micelles was non-competitive with respect to ATP, histone, diolein, phorbol ester and Ca²⁺. It has a K_i of about 30 m. The inhibition kinetics as a function of phosphatidylserine concentration is more complex but suggestive of competitive inhibition. Cholesterylphosphoryldimethylethanolamine does not prevent the partitioning of protein kinase C into the membrane. This inhibitor lowers the Ca²⁺-phosphatidylserine-independent phosphorylation of protamine sulfate by protein kinase C and directly affects the catalytic segment of the enzyme generated by tryptic hydrolysis. Thus, this zwitterionic bilayer stabilizing inhibitor of protein kinase C both competes with the binding of phosphatidylserine as well as affects the active site of protein kinase C.Abbreviation CPD cholesterylphosphoryldimethylethanolamine     

Soil N mineralization and nitrification in relation to nitrogen solution chemistry in a small forested watershed

Spatial variations in soil processes regulating mineral N losses to streams were studied in a small watershed near Toronto, Ontario. Annual net N mineralization in the 0–8 cm soil was measured in adjacent upland and riparian forest stands using in situ soil incubations from April 1985 to 1987. Mean annual rates of soil N mineralization and nitrification were higher in a maple soil (93.8 and 87.0 kg.ha^–1) than in a pine soil (23.3 and 8.2 kg.ha^–1 ). Very low mean rates of mineralization (3.3 kg.ha^–1) and nitrification (3.4 kg.ha^–1) were found in a riparian hemlock stand. Average NO₃-N concentrations in soil solutions were 0.3–1.0 mg.L^–1 in the maple stand and >0.06mg.L^–1 in the pine stand. Concentrations of NO₃–N in shallow ground water and stream water were 3–4× greater in a maple subwatershed than in a pine subwatershed. Rapid N uptake by vegetation was an important mechanism reducing solution losses of NO₃–N in the maple stand. Low rates of nitrification were mainly responsible for negligible NO₃–N solution losses in the pine stand.     

Influence of Co2+, Ni2+ and Fe2+ on the production of tetrapyrroles by Methanosarcina barkeri

Summary The selective formation of three tetrapyrroles, Co-containing corrinoids, Ni-containing factor F₄₃₀ and Fe-containing cytochromes (haems) by Methanosarcina barkeri Fusaro (DSM 804) was achieved as a function of the concentrations of Co²⁺, Ni²⁺ and Fe²⁺ in a methanol minimmum medium. It was found that about 70% of the total tetrapyrroles synthesized was excreted into the culture supernatant. Hence, the continuous production of tetrapyrroles in a fixed-bed reactor (supporter: porous diatomaceous clay) was carried out at a dilution rate of 10 day^-1 (850 ml medium/85 ml column/day). The effluent discharged from the reactor contained the excreted tetrapyrroles, the concentrations of which were dependent upon the Co²⁺, Ni²⁺ and Fe²⁺ concentrations in the feed medium. The maximum productivities from the reactor (1 l basis) were 52 M corrinoids/day, 24 M F₄₃₀/day and 8 M haems/day, respectively.     

A concordance correlation coefficient to evaluate reproducibility

A new reproducibility index is developed and studied. This index is the correlation between the two readings that fall on the 45 degree line through the origin. It is simple to use and possesses desirable properties. The statistical properties of this estimate can be satisfactorily evaluated using an inverse hyperbolic tangent transformation. A Monte Carlo experiment with 5,000 runs was performed to confirm the estimate's validity. An application using actual data is given.     

Orientation of the protonated retinal Schiff base group in bacteriorhodopsin from absorption linear dichroism.

Linear dichroism experiments are performed on light-adapted bacteriorhodopsin (BR568) films containing native retinal (A1) and its 3,4-dehydroretinal (A2) analogue to measure the angle between the chromophore transition dipole moment and the membrane normal. QCFF/pi calculations show that the angle between the transition moment and the long axis of the polyene is changed by 3.4 degrees when the C3-C4 bond is unsaturated. The difference vector between the two transition moments points in the same direction as the Schiff base (N----H) bond for the all-trans BR568 chromophore. Because the plane of the chromophore is perpendicular to the membrane plane, a comparison of the transition moment orientations in the A1- and A2-pigments enables us to determine the orientation of the N----H bond with respect to the absolute chromophore (N----C5 vector) orientation. The angles of the transition moments are 70.3 degrees +/- 0.4 degrees and 67.8 degrees +/- 0.4 degrees for the A1- and A2-pigments, respectively. The fact that the change in the transition moment angle (2.5 degrees) is close to the predicted 3.4 degrees supports the idea that the chromophore plane is nearly perpendicular to the membrane plane. The decreased transition moment angle in the A2-analogue requires that the N----H bond and the N----C5 vector point toward the same membrane surface. Available results indicate that the N----C5 vector points toward the exterior in BR568. With this assignment, we conclude that the N----H bond points toward the exterior surface and its most likely counterion Asp-212. This information makes possible the construction of a computer graphics model for the active site in BR568.     

Bradyrhizobium japonicum Survival in and Soybean Inoculation with Fluid Gels

The utilization of gels, which are used for fluid drilling of seeds, as carriers of Bradyrhizobium japonicum for soybean (Glycine max (L.) Merr.) inoculation was studied. Gels of various chemical composition (magnesium silicate, potassium acrylate-acrylamide, grafted starch, and hydroxyethyl cellulose) were used, although the hydroxyethyl cellulose gels were more extensively investigated. Gel inocula were prepared by mixing gel powder with liquid cultures of B. japonicum (2% [wt/vol]). The population of B. japonicum USDA 110 did not change in each gel type during 8 days of incubation at 28°C. These fluid gels were prepared with late-exponential-growth-phase cells that were washed and suspended in physiological saline. Mid-exponential-growth-phase B. japonicum USDA 110, 123, and 138 grew in cellulose gels prepared with yeast extract-mannitol broth as well as or better than in yeast extract-mannitol broth alone for the first 10 days at 28°C. Populations in these cellulose gels after 35 days were as large as when the gels had originally been prepared, and survival occurred for at least 70 days. Soybeans grown in sand in the greenhouse had greater nodule numbers, nodule weights, and top weights with gel inoculants compared with a peat inoculant. In soil containing 10³ indigenous B. japonicum per g of soil, inoculation resulted in increased soybean nodule numbers, nodule weights, and top weights, but only nodule numbers were greater with gel than with peat inoculation. The gel-treated seeds carried 10² to 10³ more bacteria per seed (10⁷ to 10⁸) than did the peat-treated seeds.