Phase transition in dioctadecyldimethylammonium bromide and chloride vesicles prepared by different methods

The gel to liquid crystalline phase transition of the double-chained cationic dioctadecyldimethylammonium chloride and bromide (DODAX, X = Cl- or Br-) in aqueous vesicle dispersions prepared by non-sonication. sonication and extrusion has been investigated using high-sensitivity differential scanning calorimetry (DSC). The transition temperature (Tm) is a function of the preparation method, amphiphile concentration, vesicle curvature and nature of the counterion. DSC thermograms for DODAB and DODAC non-sonicated vesicle dispersions exhibit a single endothermic peak at Tm roughly independent of concentration up to 10 mM. Extrusion broadens the transition peak and shifts Tm downwards. Sonication, however, broadens slightly the transition peak and tends to shift Tm upwards suggesting that extrusion and sonication form vesicles with different characteristics. DODAC always exhibits higher Tm than DODAB irrespective of the preparation method. Tm changes as follows: Tm (sonicated) > or = Tm (non-sonicated) > Tm (extruded). Hysteresis of about 7 degrees C was observed for DODAB vesicle dispersions.     

Water transfer via ectomycorrhizal fungal hyphae to conifer seedlings

Little is known about water transfer via mycorrhizal hyphae to plants, despite its potential importance in seedling establishment and plant community development, especially in arid environments. Therefore, this process was investigated in the study reported in this paper in laboratory-based tripartite mesocosms containing the shrub Arctostaphylos viscida (manzanita) and young seedlings of sugar pine (Pinus lambertiana) and Douglas-fir (Pseudotsuga menziesii). The objectives were to determine whether water could be transported through mycorrhizal symbionts shared by establishing conifers and A. viscida and to compare the results obtained using two tracers: the stable isotope deuterium and the dye lucifer yellow carbohydrazide. Water containing the tracers was added to the central compartment containing single manzanita shrubs. The fungal hyphae were then collected as well as plant roots from coniferous seedlings in the other two compartments to determine whether water was transferred via fungal hyphae. In addition, the length of the hyphae and degree of mycorrhizal colonisation were determined. Internal transcribed spacer–restriction fragment length polymorphism (ITS-RFLP) analysis was used to identify the fungal species involved in dye (water) transfer. Results of the stable isotope analysis showed that water is transferred via mycorrhizal hyphae, but isotopically labelled water was only detected in Douglas-fir roots, not in sugar pine roots. In contrast, the fluorescent dye was transported via mycorrhizal hyphae to both Douglas-fir and sugar pine seedlings. Only 1 of 15 fungal morphotypes (identified as Atheliaceae) growing in the mesocosms transferred the dye. Differences were detected in the water transfer patterns indicated by the deuterium and fluorescent dye tracers, suggesting that the two labels are transported by different mechanisms in the same hyphae and/or that different fungal taxa transfer them via different routes to host plants. We conclude that both tracers can provide information on resource transfer between fungi and plants, but we cannot be sure that the dye transfer data provide accurate indications of water transfer rates and patterns. The isotopic tracer provides more direct indications of water movement and is therefore more suitable than the dye for studying water relations of plants and their associated mycorrhizal fungi.     

The Mini-BESTest - a clinically reproducible tool for balance evaluations in mild to moderate Parkinson’s disease?

Background

The Mini-BESTest is a clinical balance test that has shown a high sensitivity in detecting balance impairments in elderly with Parkinson's disease (PD). However, its reproducibility between different raters and between test occasions has yet to be investigated in a clinical context. Moreover, no one has investigated the reproducibility of the Mini-BESTest's subcomponents (i.e. anticipatory postural adjustments; postural responses; sensory orientation and dynamic gait).We aimed to investigate the inter-rater and test-retest reproducibility (reliability as well as agreement) of the Mini-BESTest, as well as its subcomponents, in elderly with mild to moderate PD, performed under conditions assimilating clinical practice.

Method

This was an observational measurement study with a test-retest design.Twenty-seven individuals with idiopathic PD (66 - 80 years, mean age: 73; Hoehn & Yahr: 2-3; 1-15 years since diagnosis) were included. Two test administrators, having different experiences with the Mini-BESTest, administered the test individually, in separate rooms in a hospital setting. For the test-retest assessment, all participants returned 7 days after the first test session to perform the Mini-BESTest under similar conditions. Intra-class correlation coefficients (ICC_2.1), standard error of measurement (SEM_agreement), and smallest real difference (SRD) were analyzed.

Results

The Mini-BESTest showed good reliability for both inter-rater and test-retest reproducibility (ICC = 0.72 and 0.80). Regarding agreement, the measurement error (SRD) was found to be 4.1 points (accounting for 15% of the maximal total score) for inter-rater reproducibility and 3.4 points (12% of the maximal total score) for test-retest reproducibility. The investigation of the Mini-BESTest's subcomponents showed a similar pattern for both inter-rater and test-retest reproducibility, where postural responses had the largest proportional measurement error, and sensory orientation showed the highest agreement.

Conclusions

Our findings indicate that the Mini-BESTest is able to distinguish between individuals with mild to moderate PD; however, when used in clinical balance assessments, the large measurement error needs to be accounted for.

     

Life cycle assessment in road infrastructure planning using spatial geological data

Purpose

The purpose of the study was to outline and demonstrate a new geographic information system (GIS)-based approach for utilising spatial geological data in three dimensions (i.e. length, width and depth) to improve estimates on earthworks during early stages of road infrastructure planning.

Methods

This was undertaken by using three main methodological steps: mass balance calculation, life cycle inventory analysis and spatial mapping of greenhouse gas (GHG) emissions and energy use. The mass balance calculation was undertaken in a GIS environment using two assumptions of geological stratigraphy for two proposed alternative road corridors in Sweden. The estimated volumes of excavated soil, blasted rock and filling material were later multiplied with the GHG emission and energy use factors for these processes, to create spatial data and maps in order to show potential impacts of the studied road corridors. The proposed GIS-based approach was evaluated by comparing with actual values received after one alternative was constructed.

Results and discussion

The results showed that the estimate of filling material was the most accurate (about 9 % deviation from actual values), while the estimate for excavated soil and blasted rock resulted in about 38 and 80 % deviation, respectively, from the actual values. It was also found that the total volume of excavated and ripped soils did not change when accounting for stratigraphy.

Conclusions

The conclusion of this study was that more information regarding embankment height and actual soil thickness would further improve the model, but the proposed GIS-based approach shows promising results for usage in LCA at an early stage of road infrastructure planning. Thus, by providing better data quality, GIS in combination with LCA can enable planning for a more sustainable transport infrastructure.

     

Surface Display of the Receptor-Binding Region of the Lactobacillusbrevis S-Layer Protein in Lactococcuslactis Provides Nonadhesive Lactococci with the Ability To Adhere to Intestinal Epithelial Cells

Lactobacillus brevis is a promising lactic acid bacterium for use as a probiotic dietary adjunct and a vaccine vector. The N-terminal region of the S-layer protein (SlpA) of L. brevis ATCC 8287 was recently shown to mediate adhesion to various human cell lines in vitro. In this study, a surface display cassette was constructed on the basis of this SlpA receptor-binding domain, a proteinase spacer, and an autolysin anchor. The cassette was expressed under control of the nisA promoter in Lactococcus lactis NZ9000. Western blot assay of lactococcal cell wall extracts with anti-SlpA antibodies confirmed that the SlpA adhesion domain of the fusion protein was expressed and located within the cell wall layer. Whole-cell enzyme-linked immunosorbent assay and immunofluorescence microscopy verified that the SlpA adhesion-mediating region was accessible on the lactococcal cell surface. In vitro adhesion assays with the human intestinal epithelial cell line Intestine 407 indicated that the recombinant lactococcal cells had gained an ability to adhere to Intestine 407 cells significantly greater than that of wild-type L. lactis NZ9000. Serum inhibition assay further confirmed that adhesion of recombinant lactococci to Intestine 407 cells was indeed mediated by the N terminus-encoding part of the slpA gene. The ability of the receptor-binding region of SlpA to adhere to fibronectin was also confirmed with this lactococcal surface display system. These results show that, with the aid of the receptor-binding region of the L. brevis SlpA protein, the ability to adhere to gut epithelial cells can indeed be transferred to another, nonadhesive, lactic acid bacterium.     

Regional high affinity synaptosomal transport of choline in mouse brain — Influence of oxotremorine treatment

Kinetic parameters for high affinity [HA] uptake $\text{in vitro}$ in synaptosomes from different mouse brain regions were investigated. V_max was highest in the striatum [200 pmol.· mg protein^?1 · 4 min^?1], followed by the cortex [111 pmol · mg protein^?1 · 4 min^?1], hippocampus [63 pmol · mg protein^?1 · 4 min^?1], midbrain [21 pmol · mg protein^?1 · 4 min^?1] and, lowest, medulla oblongata [5 pmol · mg protein^?1 · 4 min^?1]. K_m was about the same in all brain regions [0.9–1.4 μM]. No sign of HA uptake was detected in synaptosomes from the cerebellum. A clear relationship between V_max for synaptosomal HA uptake of Ch $\text{in vitro}$ and apparent turnover of ACh $\text{in vivo}$ was found between the brain regions. Administration of oxotremorine [1 mg·kg^?1 i.p.] decreased V_max for HA uptake of Ch by 60% in the cortex and hippocampus, by 50% in the striatum and by 20% in the midbrain. This effect is in accordance with the previously observed marked decrease in turnover of ACh in these brain regions following oxotremorine treatment.     

Studies on the assembly of apo B-100-containing lipoproteins in HepG2 cells

The relationship between apoB-100 and the membrane of the endoplasmic reticulum (ER) has been studied by a combination of pulse-chase methodology and subcellular fractionation. HepG2 cells were pulse-labeled with [35S]methionine for 3 min and chased with cold methionine for periods between 0 and 20 min. ApoB-100 and albumin, present in the membrane as well as in the luminal content of the ER vesicles, were isolated after each chase period. The results indicated that apoB-100 was cotranslationally bound to the membrane of the ER, and from this membrane-bound form, was transferred to the lumen after a delay of 10-15 min. Albumin was, as could be expected for a typical secretory protein, cotranslationally sequestered in the lumen of the ER. Apo-B-100-containing lipoproteins present in the microsomal lumen were analyzed by ultracentrifugation in a sucrose gradient. ApoB-100 occurred on rounded particles in three density regions: (i) d 1.1065-1.170 g/ml (Fraction I), (ii) d 1.011-1.045 g/ml (Fraction II), and (iii) d less than 1.011 g/ml (Fraction III). Fraction I, isolated from cells cultured in the absence of oleic acid, contained a homogenous population of particles with a mean diameter of approximately 200 A. Fraction I isolated from cells cultured in the presence of oleic acid was slightly more heterogeneous and had a mean diameter of approximately 250 A. Fractions II and III had mean diameters of 300 and 500 A, respectively. Cholesterol esters and triacylglycerol were the quantitatively dominating lipid constituents of all three fractions. Pulse-chase experiments indicated that Fraction I contained the newly assembled lipoproteins. With increasing chase time, the apoB-100 radioactivity was redistributed from Fraction I to Fractions II and III, indicating that Fraction I is converted into Fractions II and III during the intracellular transfer. Particles corresponding to Fractions II and III were by far the most abundant lipoproteins found in the medium. The results presented support the possibility of a sequential assembly of apoB-100-containing lipoproteins.     

A short review on SSF - an interesting process option for ethanol production from lignocellulosic feedstocks

Simultaneous saccharification and fermentation (SSF) is one process option for production of ethanol from lignocellulose. The principal benefits of performing the enzymatic hydrolysis together with the fermentation, instead of in a separate step after the hydrolysis, are the reduced end-product inhibition of the enzymatic hydrolysis, and the reduced investment costs. The principal drawbacks, on the other hand, are the need to find favorable conditions (e.g. temperature and pH) for both the enzymatic hydrolysis and the fermentation and the difficulty to recycle the fermenting organism and the enzymes. To satisfy the first requirement, the temperature is normally kept below 37 degrees C, whereas the difficulty to recycle the yeast makes it beneficial to operate with a low yeast concentration and at a high solid loading. In this review, we make a brief overview of recent experimental work and development of SSF using lignocellulosic feedstocks. Significant progress has been made with respect to increasing the substrate loading, decreasing the yeast concentration and co-fermentation of both hexoses and pentoses during SSF. Presently, an SSF process for e.g. wheat straw hydrolyzate can be expected to give final ethanol concentrations close to 40 g L-1 with a yield based on total hexoses and pentoses higher than 70%.     

Expression of Bcl-2, Bcl-x, Mcl-1, Bax and Bak in human uterine leiomyomas and myometrium during the menstrual cycle and after menopause

To investigate the expression of Bcl-2, Bcl-x, Mcl-1, Bax and Bak proteins in human uterine leiomyomas and homologous myometrium during the menstrual cycle and after menopause.The expression of Bcl-2, Bcl-x, Mcl-1, Bax and Bak in leiomyomas (n=24) and myometrial samples (n=22) from women with leiomyomas was measured by immunohistochemistry and Western blot. Measured by immunohistochemistry, a significant difference between leiomyomas and myometrium was observed only for the Bax protein, in tissues obtained from women in the secretory phase of the menstrual cycle. The Bcl-2 staining was more abundant in leiomyomas than in myometrium only in tissues obtained in the proliferative phase of the cycle. Bcl-2 was more abundant in leiomyomas from women of fertile age than in leiomyomas from menopausal women. No significant differences were observed for the Bcl-x or Bak proteins, whereas the Mcl-1 protein was significantly less abundant in secretory phase leiomyomas than in leiomyomas from menopausal women. Western blot analysis based on pools of tissue extracts from the different groups essentially confirmed the data obtained by immunohistochemistry. Bcl-2 family proteins are expressed in leiomyomas and myometrium in different phases related to and influenced by gonadal steroids. These proteins are suggested to interact with each other in the regulation of programmed cell death, apoptosis, but their specific role in growth control of uterine leiomyomas remains to be investigated.