Age-Specific Mortality During the 1918 Influenza Pandemic: Unravelling the Mystery of High Young Adult Mortality

The worldwide spread of a novel influenza A (H1N1) virus in 2009 showed that influenza remains a significant health threat, even for individuals in the prime of life. This paper focuses on the unusually high young adult mortality observed during the Spanish flu pandemic of 1918. Using historical records from Canada and the U.S., we report a peak of mortality at the exact age of 28 during the pandemic and argue that this increased mortality resulted from an early life exposure to influenza during the previous Russian flu pandemic of 1889–90. We posit that in specific instances, development of immunological memory to an influenza virus strain in early life may lead to a dysregulated immune response to antigenically novel strains encountered in later life, thereby increasing the risk of death. Exposure during critical periods of development could also create holes in the T cell repertoire and impair fetal maturation in general, thereby increasing mortality from infectious diseases later in life. Knowledge of the age-pattern of susceptibility to mortality from influenza could improve crisis management during future influenza pandemics.

“The war is over – and I must go” Egon Schiele, 1890–1918.

     

Mechanism of Bacterial Oligosaccharyltransferase: IN VITRO QUANTIFICATION OF SEQUON BINDING AND CATALYSIS*

N-Linked glycosylation is an essential post-translational protein modification in the eukaryotic cell. The initial transfer of an oligosaccharide from a lipid carrier onto asparagine residues within a consensus sequon is catalyzed by oligosaccharyltransferase (OST). The first X-ray structure of a complete bacterial OST enzyme, Campylobacter lari PglB, was recently determined. To understand the mechanism of PglB, we have quantified sequon binding and glycosylation turnover in vitro using purified enzyme and fluorescently labeled, synthetic peptide substrates. Using fluorescence anisotropy, we determined a dissociation constant of 1.0 μm and a strict requirement for divalent metal ions for consensus (DQNAT) sequon binding. Using in-gel fluorescence detection, we quantified exceedingly low glycosylation rates that remained undetected using in vivo assays. We found that an alanine in the −2 sequon position, converting the bacterial sequon to a eukaryotic one, resulted in strongly lowered sequon binding, with in vitro turnover reduced 50,000-fold. A threonine is preferred over serine in the +2 sequon position, reflected by a 4-fold higher affinity and a 1.2-fold higher glycosylation rate. The interaction of the +2 sequon position with PglB is modulated by isoleucine 572. Our study demonstrates an intricate interplay of peptide and metal binding as the first step of protein N-glycosylation.     

Translocation of S100A1(1) calcium binding protein during heart surgery

Myocardial ischemia during cardiopulmonary bypass terminated by reperfusion generally leads to different degrees of damage of the cardiomyocytes induced by transient cytosolic Ca(2+) overload. Recently, much attention has been paid to the role of heart-specific Ca(2+)-binding proteins in the pathogenesis of myocardial ischemia-reperfusion injury. S100A1 is a heart-specific EF-hand Ca(2+)-binding protein that is directly involved in a variety of Ca(2+)-mediated functions in myocytes. The aim of our study was to investigate the localization and translocation of S100A1 in the human heart under normal (baseline) conditions and after prolonged ischemia and reperfusion of the myocardium. Our data suggest that S100A1 is directly involved in the transient perioperative myocardial damage caused by ischemia during open heart surgery in humans. Given its role in the contractile function of muscle cells, this S100 protein could be an important "intracellular link" in ischemia-reperfusion injury of the heart.     

Divide-and-conquer crystallographic approach towards an atomic structure of intermediate filaments

Intermediate filaments (IFs) represent an essential component of the cytoskeleton in higher eukaryotic cells. The elementary building block of the IF architecture is an elongated dimer with its dominant central part being a parallel double-stranded alpha-helical coiled coil. Filament formation proceeds via a specific multi-step association of the dimers into the unit-length filaments, which subsequently anneal longitudinally and finally radially compact into mature filaments. To tackle the challenge of a crystallographic structure determination, we have produced and characterised 17 overlapping soluble fragments of human IF protein vimentin. For six fragments ranging in length between 39 and 84 amino acid residues, conditions yielding macroscopic crystals could be established and X-ray diffraction data were collected to the highest resolution limit between 1.4 and 3 A. We expect that solving the crystal structures of these and further fragments will eventually allow us to patch together a molecular model for the full-length vimentin dimer. This divide-and-conquer approach will be subsequently extended to determining the crystal structures of a number of complexes formed by appropriate vimentin fragments, and will eventually allow us to establish the three- dimensional architecture of complete filaments at atomic resolution.     

Calcium-mediated structural changes of native nuclear pore complexes monitored by time-lapse atomic force microscopy

Nuclear pore complexes (NPCs) are large macromolecular assemblies embedded in the double membrane nuclear envelope. They are the major gateways mediating transport of ions, small molecules, proteins, RNAs, and ribonucleoprotein particles in and out of the nucleus in interphase cells. Understanding structural changes at the level of individual pores will be a prerequisite to eventually correlate the molecular architecture of the NPC with its distinct functional states during nucleocytoplasmic transport. Toward this goal, we have employed time-lapse atomic force microscopy of native NPCs kept in buffer, and recorded calcium-mediated structural changes such as the opening (i.e. +Ca2+) and closing (i.e. -Ca2+) of individual nuclear baskets. Most likely, this structural change of the nuclear basket involves its distal ring which may act as an iris-like diaphragm. In order to directly correlate distinct structural features with corresponding functional states and dynamic aspects, we also addressed the question of whether the "central plug" or "transporter" actually represents a calcium-sensitive component of the NPC involved in mediating nucleocytoplasmic transport. Our data indicate that in the absence of ATP, cytoplasmic plugging/unplugging of the NPC is insensitive to calcium.     

Domain analysis of cortexillin I: actin-bundling, PIP(2)-binding and the rescue of cytokinesis

Cortexillins are actin-bundling proteins that form a parallel two-stranded coiled-coil rod. Actin-binding domains of the alpha-actinin/spectrin type are located N-terminal to the rod and unique sequence elements are found in the C-terminal region. Domain analysis in vitro revealed that the N-terminal domains are not responsible for the strong actin-filament bundling activity of cortexillin I. The strongest activity resides in the C-terminal region. Phosphatidylinositol 4,5-bisphosphate (PIP(2)) suppresses this bundling activity by binding to a C-terminal nonapeptide sequence. These data define a new PIP(2)-regulated actin-bundling site. In vivo the PIP(2)-binding motif enhances localization of a C-terminal cortexillin I fragment to the cell cortex and improves the rescue of cytokinesis. This motif is not required, however, for translocation to the cleavage furrow. A model is presented proposing that cortexillin translocation is based on a mitotic cycle of polar actin polymerization and midzone depolymerization.     

The cover of living and dead corals from airborne remote sensing

Trends in coral cover are widely used to indicate the health of coral reefs but are costly to obtain from field survey over large areas. In situ studies of reflected spectra at the coral surface show that living and recently dead colonies can be distinguished. Here, we investigate whether such spectral differences can be detected using an airborne remote sensing instrument. The Compact Airborne Spectrographic Imager (Itres Research Ltd, Canada) was flown in two configurations: 10 spectral bands with 1-m² pixels and 6 spectral bands with 0.25-m² pixels. First, we show that an instrument with 10 spectral bands possesses adequate spectral resolution to distinguish living Porites, living Pocillopora spp., partially dead Porites, recently dead Porites (total colony mortality within 6 months), old dead (>6 months) Porites, Halimeda spp., and coralline red algae when there is no water column to confuse spectra. All substrata were distinguished using fourth-order spectral derivatives around 538 nm and 562 nm. Then, at a shallow site (Tivaru) at Rangiroa Atoll, Tuamotu Archipelago (French Polynesia), we show that live and dead coral can be distinguished from the air to a depth of at least 4 m using first- and fourth-order spectral derivatives between 562–580 nm. However, partially dead and recently dead Porites colonies could not be distinguished from an airborne platform. Spectral differences among substrata are then exploited to predict the cover of reef substrata in ten 25-m² plots at nearby Motu Nuhi (max depth 8 m). The actual cover in these plots was determined in situ using quadrats with a 0.01-m² grid. Considerable disparity occurred between field and image-based measures of substrate cover within individual 25-m² quadrats. At this small scale, disparity, measured as the absolute difference in cover between field and remote-sensing methods, reached 25% in some substrata but was always less than 10% for living coral (99% of which consisted of Porites spp.). At the scale of the reef (all ten 25-m² quadrats), however, disparities in percent cover between imagery and field data were less than 10% for all substrata and extremely low for some classes (e.g. <3% for living Porites, recently dead Porites and Halimeda). The least accurately estimated substrata were sand and coralline red algae, which were overestimated by absolute values 7.9% and 6.6%, respectively. The precision of sampling was similar for field and remote-sensing methods: field methods required 19 plots to detect a 10% difference in coral cover among three reefs with a statistical power of 95%. Remote-sensing methods required 21 plots. However, it took 1 h to acquire imagery over 92,500 m² of reef, which represents 3,700 plots of 25 m² each, compared with 3 days to survey 10 such plots underwater. There were no significant differences in accuracy between 1-m² and 0.25-m² image resolutions, suggesting that the advantage of using smaller pixels is offset by reduced spectral information and an increase in noise (noise was observed to be 1.6–1.8 times greater in 0.25-m² pixels). We show that airborne remote sensing can be used to monitor coral and algal cover over large areas, providing that water is shallow and clear, and that brown fleshy macroalgae are scarce, that depth is known independently (e.g. from sonar survey).     

Structure and functional analysis of the fungal galectin CGL2

Recognition of and discrimination between potential glyco-substrates is central to the function of galectins. Here we dissect the fundamental parameters responsible for such selectivity by the fungal representative, CGL2. The 2.1 A crystal structure of CGL2 and five substrate complexes reveal that this prototype galectin achieves increased substrate specificity by accommodating substituted oligosaccharides of the mammalian blood group A/B type in an extended binding cleft. Kinetic studies on wild-type and mutant CGL2 proteins demonstrate that the tetrameric organization is essential for functionality. The geometric constraints due to the orthogonal orientation of the four binding sites have important consequences on substrate binding and selectivity.     

Exploring the 3D molecular architecture of Escherichia coli type 1 pili

An integrated approach combining information gained by Fourier transformation, linear Markham superposition (real space) and mass-per-length measurement by scanning transmission electron microscopy was used to analyze the helical structure of the rod-like type 1 pili expressed by uropathogenic Escherichia coli strain W3110. The 3D reconstruction calculated from the experimental data showed the pili to be 6.9nm wide, right-handed helical tubes with a 19.31(+/-0.34)nm long helical repeat comprising 27 FimA monomers associated head-to-tail in eight turns of the genetic one-start helix. Adjacent turns of the genetic helix are connected via three binding sites making the pilus rod rather stiff. In situ immuno-electron microscopy experiments showed the minor subunit (FimH) mediating pilus adhesion to bladder epithelial cells to be the distal protein of the pilus tip, which had a spring-like appearance at higher magnification. The subunits FimG and FimF connect FimH to the FimA rod, the sequential orientation being FimA-FimF-FimG-FimH. The electron density map calculated at 18A resolution from an atomic model of the pilus rod (built using the pilin domain FimH together with the G1 strand of FimC as a template for FimA and applying the optimal helical parameters determined to the head-to-tail interaction model for pilus assembly) was practically identical with that of the actual 3D reconstruction.     

Modular self-assembly of a Y-shaped multiprotein complex from seven nucleoporins

Now that it is likely that all yeast nucleoporins are known, one of the ultimate goals is the in vitro assembly of the entire nuclear pore complex from its approximately 30 individual components. Here, we report the reconstitution of seven proteins (Nup133p, Nup145p-C, Nup120p, Nup85p, Nup84p, Seh1p and Sec13p) into a heptameric 0.5 MDa nuclear pore subcomplex. We found that double plasmid transformation combined with bi-cistronic mRNA translation allow the expression and assembly of distinct subcomplexes of up to five nucleoporins in a single Escherichia coli cell. During the sequential reconstitution of the Nup84p complex, smaller assembly intermediates can be isolated, which exhibit modular structures determined by electron microscopy that finally make up the whole Y-shaped Nup84p complex. Importantly, a seventh subunit, Nup133p, was incorporated into the complex through its interaction with Nup84p, thereby elongating one arm of the Y-shaped assembly to an approximately 40 nm long stalk. Taken together, our data document that the Nup84p-Nup133p complex self-assembles in a modular concept from distinct smaller nucleoporin construction sets.