A partially deficient mutant, recA1730, that fails to form normal nucleoprotein filaments.

Summary The phenotype of the recA1730 mutant is highly dependent on the level of expression of the RecA1730 protein. If the recA1730 gene was expressed from its own promoter, the cells were deficient in recombination and SOS induction. In contrast, when the recA1730 gene was expressed under the control of recAo98, a constitutive operator that increased the RecA1730 concentration 20-fold, cells became proficient in recombination and SOS induction. Likewise, in crude extracts, fivefold more RecA1730 than RecAwt was required to produce full cleavage of LexA protein. The requirement for a high RecA1730 concentration for recombination and LexA cleavage suggests that the recA1730 defect alters a common reaction step. In fact, in vitro data show that the impaired assembly of RecA1730 protein on single-stranded DNA (ssDNA) can account for the mutant phenotype. Purified RecA1730 protein was assayed in vitro for ssDNA binding and ATPase activities. RecA1730, like RecAwt, retained ssDNA equally well on nitrocellulose filters; this activity was specifically inhibited by a monoclonal anti-RecA antibody. However, RecA1730 protein did not form complete filaments on ssDNA, as shown by two observations: (i) most of the protein did not elute with ssDNA during gel filtration; and (ii) binding of RecA1730 to ssDNA did not protect it from being digested by DNaseI. RecA1730 hydrolysed ATP in high salt but was defective in ssDNA-dependent ATP hydrolysis. These results strongly suggest that RecA1730 binds to ATP and ssDNA but does not form normal nucleoprotein filaments.Abbreviations RecAwt RecA wind-type protein - ssDNA singlestranded DNA - dsDNA dmble-stranded DNA     

Developmental analysis of the cell recognition mechanism in the ciliate Euplotes raikovi

Euplotes raikovi, like other ciliates, passes through a postconjugal immaturity, operatively identified by an apparent cell inability to form mating pairs under experimental conditions that are the same as those used for inducing mating at maturity. In cells homozygous for the gene mat-2, which controls the pheromone Er-2, Er-2 mRNA synthesis and mature Er-2 secretion were shown to start from the very beginning of the life cycle and continue throughout immaturity, although to extents estimated to be 5- to 10-fold lower than at maturity. In addition, experiments of ¹²⁵ I-Er-2 binding and crosslinking provided evidence that autocrine pheromone-binding sites, showing values of the dissociation constant of the order of 10^?9 M, are on the surface of immature cells. The number of these sites per cell was estimated to increase from less than 10⁶ per cell of 5–7 fissions of age, to about 16 × 10⁶ at maturity. These results were taken to suggest that a pheromone-receptor production is stimulated during immaturity by autocrine pheromone binding to cells and that this production might be essential for the development of a pheromone-receptor density high enough to transform the cell from “immature” to “adult,” that is competent to respond as well to pheromones of conspecific, genetically different cells. © 1992 Wiley-Liss, Inc.     

A universal primer mixture for sequence determination at the 3′ ends of cDNAs

We have devised a universal primer which can be used to sequence the 3′-ends of cloned cDNAs containing a polyA tail. The primer consists of an equimolar mixture of three primers: 20 T nucleotides followed by either an A, C, or G nucleotide (5′→3′). With this primer mixture and the dideoxynucleotide chain termination method, we determined the 3′-terminal sequence of human β-actin cDNA in an Okayama-Berg vector, in four parallel sets of reactions containing either a single primer (T₂₀G, T₂₀C, or T₂₀A) or an equimolar mixture of all three primers. Priming with both T₂₀A and the triple mixture gave clearly readable results that agree with the known sequence of the human β-actin gene, and we have applied this method successfully to several other cDNAs in the Okayama-Berg expression vector. Use of this universal primer mixture facilitates determination of sequences at the 3′-ends of cDNAs while by-passing the polyA tail region.     

Interclonal variation in methylation patterns for expressed and non-expressed genes.

A mass culture of human diploid fibroblasts, and eight clones isolated from that mass culture, were examined for methylation patterns in several regions of DNA. Plasmid-inserted cDNA sequences were used as probes for alpha-hCG, beta-globin, A gamma- and G gamma-globin, and beta- and gamma-actin gene regions. Each probe revealed a different clone-specific pattern of DNA methylation, indicating a striking degree of inter-clonal heterogeneity, for those gene regions which are not normally expressed in diploid fibroblasts (alpha-hCG, gamma-globin and beta-globin). Intra-clonal variation was also evident in many instances, implying that heterogeneity could arise de novo in pure cell clones during serial passage. Thus methylation patterns, in particular for repressed genes, appear to be unstably inherited in these cells, and this instability may lead to random derepression in some cell lineages during mitotic growth.     

Electrophysiology of phagocytic membranes. II. Membrane potential and induction of slow hyperpolarizations in activated macrophages.

The potential differences measured on the cell surface and after penetration into the cytoplasm of activated macrophages are described. Linear regressions are made of the measured potential differences as functions of the tip potential of each microelectrode. The surface potential of the macrophage is not significantly different from zero. Mouse macrophages have a transmembrane potential of--26 mV, whereas in guinea-pig cells this value is--18 mV. The input resistances of guinea-pig cells are higher than those of mouse macrophages. The cytoplasmic location of the electrode was characterized both by fluorescent dye injection and by electric criteria. Slow membrane hyperpolarizations are directly elicited by mechanical stimulation. Electric responses evoked by current pulses were further characterized. Our results lead to the extablishment of objective criteria to validate intracellular recordings from macrophage.     

On the identity of dnaP and dnaF genes of Bacillus subtilis

Summary The dnaP strains of Bacillus subtilis are altered in the initiation of DNA replication at high temperature (Riva et al., 1975). Fine mapping of the gene shows that it is located very close to the dnaF gene, described by Karamata and Gross (1970) and mapped by Love et al. (1976) in the polC region. The phenotype of both mutants is indistinguishable: the DNA synthesis stops at non permissive temperature after synthesizing an amount of DNA equivalent to the completion of the rounds of replication already initiated; at permissive temperature they are abnormally sensitive to MMS and are reduced in the ability to be transformed. Both mutants are to be considered as belonging to the dnaF locus.The dnaF gene is very close to the polC gene, which specifies the DNA polymerase III of B. subtilis. The DNA polymerase III of the dnaF mutants is not temperature sensitive in vitro, however, the level of this enzyme is lower by a factor of 4 or 5 in the dnaF mutants, at the permissive temperature. Following shift of dnaF cultures to the non permissive temperature, the level of DNA polymerase III activity specifically decreases further by a factor of at least 10 in the mutant, whereas the DNA polymerase I level is unaffected.The possible roles of the dnaF gene in the control of the cellular level of the DNA polymerase III, and the possibility of a regulatory role of DNA polymerase III in the initiation of DNA replication in bacteria are discussed.Abbreviations and symbols HPUra 6-(p-hydroxyphenylazo)-uracil; mic, minimum inhibitory concentration - MMS methyl-methanesufonate - Pol I Pol II and Pol III: DNA polymerase I, II and III respectively - PCMB parachloro-mercuri-benzoate     

Fate of mimosine administered orally to sheep and its effectiveness as a defleecing agent.

Mimosine was administered orally to Merino sheep once daily for periods of 1-3 days, either as the isolated compound or in the foliage of Leucaena leucocephala. A single daily dose of mimosine of 450 or 600 mg/kg body weight was effective for defleecing sheep. A daily dose rate of 300 mg/kg was effective for defleecing sheep if given on two successive days. The effectiveness of a treatment for defleecing sheep was related to the concentration of mimosine in plasma following dosing; defleecing ensued when the concentration of mimosine in plasma was maintained above 0-1 mmol/l for at least 30 h. The main products excreted in urine were mimosine and 3,4-dihydroxypyridine (DHP); small amounts of mimosinamine were also excreted. During the first day following dosing, the major excretory product was mimosine; DHP was an important component during the second and third days. In the three days following the start of dosing, between 32 and 53% of the mimosine given was accounted for as mimosine in the urine. Following an intravenous infusion of mimosine, no DHP was detected in urine; most of the mimosine was excreted intact but a small amount (c. 9%) was excreted as mimosinamine.