Induction of laccases in Trametes versicolor by aqueous wood extracts

The induction of laccase isoforms in Trametes versicolor HEMIM-9 by aqueous extracts (AE) from softwood and hardwood was studied. Samples of sawdust of Pinus sp., Cedrela sp., and Quercus sp. were boiled in water to obtain AE. Different volumes of each AE were added to fungal cultures to determine the amount of AE needed for the induction experiments. Laccase activity was assayed every 24 h for 15 days. The addition of each AE (50 to 150 μl) to the fungal cultures increased laccase production compared to the control (0.42 ± 0.01 U ml^?1). The highest laccase activities detected were 1.92 ± 0.15 U ml^?1 (pine), 1.87 ± 0.26 U ml^?1 (cedar), and 1.56 ± 0.34 U ml^?1 (oak); laccase productivities were also significantly increased. Larger volumes of any AE inhibited mycelial growth. Electrophoretic analysis revealed two laccase bands (lcc1 and lcc2) for all the treatments. However, when lcc2 was analyzed by isoelectric focusing, inducer-dependent isoform patterns composed of three (pine AE), four (oak AE), and six laccase bands (cedar AE) were observed. Thus, AE from softwood and hardwood had induction effects in T. versicolor HEMIM-9, as indicated by the increase in laccase activity and different isoform patterns. All of the enzymatic extracts were able to decolorize the dye Orange II. Dye decolorization was mainly influenced by pH. The optimum pH for decolorization was pH 5 (85 %), followed by pH 7 (50 %) and pH 3 (15 %). No significant differences in the dye decolorizing capacity were detected between the control and the differentially induced laccase extracts (oak, pine and cedar). This could be due to the catalytic activities of isoforms with pI 5.4 and 5.8, which were detected under all induction conditions.     

Genetic dissection of Al tolerance QTLs in the maize genome by high density SNP scan

Background

Aluminum (Al) toxicity is an important limitation to food security in tropical and subtropical regions. High Al saturation on acid soils limits root development, reducing water and nutrient uptake. In addition to naturally occurring acid soils, agricultural practices may decrease soil pH, leading to yield losses due to Al toxicity. Elucidating the genetic and molecular mechanisms underlying maize Al tolerance is expected to accelerate the development of Al-tolerant cultivars.

Results

Five genomic regions were significantly associated with Al tolerance, using 54,455 SNP markers in a recombinant inbred line population derived from Cateto Al237. Candidate genes co-localized with Al tolerance QTLs were further investigated. Near-isogenic lines (NILs) developed for ZmMATE2 were as Al-sensitive as the recurrent line, indicating that this candidate gene was not responsible for the Al tolerance QTL on chromosome 5, qALT5. However, ZmNrat1, a maize homolog to OsNrat1, which encodes an Al³⁺ specific transporter previously implicated in rice Al tolerance, was mapped at ~40 Mbp from qALT5. We demonstrate for the first time that ZmNrat1 is preferentially expressed in maize root tips and is up-regulated by Al, similarly to OsNrat1 in rice, suggesting a role of this gene in maize Al tolerance. The strongest-effect QTL was mapped on chromosome 6 (qALT6), within a 0.5 Mbp region where three copies of the Al tolerance gene, ZmMATE1, were found in tandem configuration. qALT6 was shown to increase Al tolerance in maize; the qALT6-NILs carrying three copies of ZmMATE1 exhibited a two-fold increase in Al tolerance, and higher expression of ZmMATE1 compared to the Al sensitive recurrent parent. Interestingly, a new source of Al tolerance via ZmMATE1 was identified in a Brazilian elite line that showed high expression of ZmMATE1 but carries a single copy of ZmMATE1.

Conclusions

High ZmMATE1 expression, controlled either by three copies of the target gene or by an unknown molecular mechanism, is responsible for Al tolerance mediated by qALT6. As Al tolerant alleles at qALT6 are rare in maize, marker-assisted introgression of this QTL is an important strategy to improve maize adaptation to acid soils worldwide.

Electronic supplementary material

The online version of this article (doi:10.1186/1471-2164-15-153) contains supplementary material, which is available to authorized users.     

Insights into the Problem of Alarm Fatigue with Physiologic Monitor Devices: A Comprehensive Observational Study of Consecutive Intensive Care Unit Patients

Purpose

Physiologic monitors are plagued with alarms that create a cacophony of sounds and visual alerts causing “alarm fatigue” which creates an unsafe patient environment because a life-threatening event may be missed in this milieu of sensory overload. Using a state-of-the-art technology acquisition infrastructure, all monitor data including 7 ECG leads, all pressure, SpO2, and respiration waveforms as well as user settings and alarms were stored on 461 adults treated in intensive care units. Using a well-defined alarm annotation protocol, nurse scientists with 95% inter-rater reliability annotated 12,671 arrhythmia alarms.

Results

A total of 2,558,760 unique alarms occurred in the 31-day study period: arrhythmia, 1,154,201; parameter, 612,927; technical, 791,632. There were 381,560 audible alarms for an audible alarm burden of 187/bed/day. 88.8% of the 12,671 annotated arrhythmia alarms were false positives. Conditions causing excessive alarms included inappropriate alarm settings, persistent atrial fibrillation, and non-actionable events such as PVC''s and brief spikes in ST segments. Low amplitude QRS complexes in some, but not all available ECG leads caused undercounting and false arrhythmia alarms. Wide QRS complexes due to bundle branch block or ventricular pacemaker rhythm caused false alarms. 93% of the 168 true ventricular tachycardia alarms were not sustained long enough to warrant treatment.

Discussion

The excessive number of physiologic monitor alarms is a complex interplay of inappropriate user settings, patient conditions, and algorithm deficiencies. Device solutions should focus on use of all available ECG leads to identify non-artifact leads and leads with adequate QRS amplitude. Devices should provide prompts to aide in more appropriate tailoring of alarm settings to individual patients. Atrial fibrillation alarms should be limited to new onset and termination of the arrhythmia and delays for ST-segment and other parameter alarms should be configurable. Because computer devices are more reliable than humans, an opportunity exists to improve physiologic monitoring and reduce alarm fatigue.     

Surface areas of 1-palmitoyl phosphatidylcholines and their interactions with cholesterol.

The activity of the high-molecular-weight beta-glucosidase (beta-D-glucoside glucohydrolase, EC 3.2.1.21) obtained from culture filtrates of Botryodiplodia theobromae Pat. was affected by added NaCl in such a way that an initial phase of stimulation was followed by a phase of rapid non-linear decrease in velocity and finally by a phase of slow linear decrease in velocity as the concentration of NaCl was increased. In the presence of 0.014 M-sodium acetate/acetic acid buffer (pH 5.0) there was a slight increase in enzymic activity in the presence of low concentrations of dioxan (up to about 10% dioxan) and a rapid decrease in enzymic activity at higher dioxan concentrations, but both effects were mitigated in the presence of 0.1 M buffer. The order of efficiency of added glucosyl acceptors in beta-glucosidase-catalysed reactions was found to be fructose greater than sucrose greater than glycerol greater than methanol. The enzyme was inactivated by the active-site-directed compound conduritol-B-epoxide; but this inactivation was concentration-dependent, was prevented by 10 mM-glucose, and involved an acidic group with pKa 4.3. A rate equation has been derived on the assumption of a mechanism of action involving a solvent-separated and an intimate glucosyl cation-carboxylate ion-pair intermediate and an alpha-glucosyl enzyme intermediate [Umezurike, G. M. (1981) Biochem. J. 199, 203-209]. Calculations based on the application of the derived rate equation and the calculated kinetic parameters show that the rate equation explains the peculiar properties of beta-glucosidase in the presence of added glucosyl acceptors or of NaCl.     

Survival estimates of bird species across altered habitats in the tropical Andes

The probability of long‐term persistence of a population is strongly determined by adult survival rates, but estimates of survival are currently lacking for most species of birds in the tropical Andes, a global biodiversity hotspot. We calculated apparent survival rates of birds in the Ecuadorian tropical Andes using a moderately long‐term (11 yr) capture–recapture dataset from three habitats that varied in how much they had been modified by human activities (native forest, introduced forest, and shrubs). We fit mark–recapture models for 28 species with habitat as a covariable. For all species, recapture rates between sampling sessions were low and varied from 0.04 for Rainbow Starfrontlets (Coeligena iris) to 0.41 for Stripe‐headed Brushfinches (Arremon assimilis) when averaged across all occupied habitats. Annual survival rates varied from 0.07 for Black‐crested Warblers (Margarornis squamiger) to 0.75 for Violet‐throated Metaltails (Metallura baroni). We found no significant differences in survival rates either among habitats or species grouped by habitat specialization. Because we found similar survival rates in native forest and human‐modified habitats, our results support those of recent studies concerning the potential value of secondary habitats for the conservation of some species of birds in the tropics. However, our conclusions are tempered by the uncertainty around the estimates of survival rates. Despite the relatively long‐term nature of our study, obtaining survival estimates for bird species in this region was challenging, and either more years of study or modification of field protocols may be needed to obtain more precise survival estimates.     

Use of ultra stable UNCG tetraloop hairpins to fold RNA structures: thermodynamic and spectroscopic applications.

RNA molecules of > 20 nucleotides have been the focus of numerous recent NMR structural studies. Several investigators have used the UNCG family of hairpins to ensure proper folding. We show that th UUCG hairpin has a minimum requirement of a two base-pair stem. Hairpins with a CG loop closing base pair and an initial 5'CG or 5'GC base pair have a melting temperature approximately 55 degrees C in 10 mM sodium phosphate. The high stability of even such small hairpins suggests that the hairpin can serve as a nucleation site for folding. For high resolution NMR work, the UNCG loop family (UACG in particular) provides excellent spectroscopic markers in one-dimensional exchangeable spectra, in two-dimensional COSY spectra and in NOESY spectra that clearly define it as forming a hairpin. This allows straightforward initiation of chemical shift assignments.     

A mutant RNA pseudoknot that promotes ribosomal frameshifting in mouse mammary tumor virus.

A single A-->G mutation that changes a potential A.U base pair to a G.U pair at the junction of the stems and loops of a non-frameshifting pseudoknot dramatically increases its frameshifting efficiency in mouse mammary tumor virus. The structure of the non-frameshifting pseudoknot APK has been found to be very different from that of pseudoknots that cause efficient frameshifting [Kang,H., Hines,J.V. and Tinoco,I. (1995) J. Mol. Biol. , 259, 135-147]. The 3-dimensional structure of the mutant pseudoknot was determined by restrained molecular dynamics based on NMR-derived interproton distance and torsion angle constraints. One striking feature of the mutant pseudoknot compared with the parent pseudoknot is that a G.U base pair forms at the top of stem 2, thus leaving only 1 nt at the junction of the two stems. The conformation is very different from that of the previously determined non-frameshifting parent pseudoknot, which lacks the A.U base pair at the top of the stem and has 2 nt between the stems. However, the conformation is quite similar to that of efficient frameshifting pseudoknots whose structures were previously determined by NMR. A single adenylate residue intervenes between the two stems and interrupts their coaxial stacking. This unpaired nucleotide produces a bent structure. The structural similarity among the efficient frameshifting pseudoknots indicates that a specific conformation is required for ribosomal frameshifting, further implying a specific interaction of the pseudoknot with the ribosome.