Preparation and activity of carbonic anhydrase immobilized on porous silica beads and graphite rods

Techniques for the immobilization of bovine carbonic anhydrase (BCA) on porous silica beads and graphite are presented. Surface coverage on porous silica beads was found to be 1.5 x 10(-5) mmol BCA/m(2), and on graphite it was 1.7 x 10(-3) mmol BCA/m(2) nominal surface area. Greater than 97% (silica support) and 85% (graphite support) enzyme activity was maintained upon storage of the immobilized enzyme for 50 days in pH 8 buffer at 4 degrees C. After 500 days storage, the porous silica bead immobilized enzyme exhibited over 70% activity. Operational stability of the enzyme on silica at 23 degrees C and pH 8 was found to be 50% after 30 days. Catalytic activity expressed as an apparent second-order rate constant K'(Enz) for the hydrolysis of p-nitrophenyl acetate (p-NPA) catalyzed by BCA immobilized on silica beads and graphite at pH 8 and 25 degrees C is 2.6 x 10(2) and 5.6 x 10(2) M(-1)s(-1) respectively. The corresponding K(ENZ) value for the free enzyme is 9.1 x 10(2) M(-1)s(-1). Activity of the immobilized enzyme was found to vary with pH in such a manner that the active site pK, on the porous silica bead support is 6.75, and on graphite it is 7.41. Possible reasons for a microenvironmental influence on carbonic anhydrase pK(a), are discussed. Comparison with literature data shows that the enzyme surface coverage on silica beads reported here is superior to previously reported data on silica beads and polyacrylamide gels and is comparable to an organic matrix support. Shifts in BCA-active site pK(a) values with support material, a lack of pH dependent activity studies in the literature, and differing criteria for reporting enzyme activity complicate literature comparisons of activity; however, immobilized BCA reported here generally exhibits comparable or greater activity than previous reports for immobilized BCA.     

Protein precipitate recovery using microporous membranes

The use of microporous membranes has been examined for the recovery of precipitated protein suspensions and related soluble protein. Membrane flux rates and soluble protein transmissions are reported for unstirred batch-cell studies and cross-flow experiments. The unstirred batch-cell gave soluble protein transmissions in the range 80-100% for feeds containing either soluble protein or a mix of soluble and isoelectrically precipitated protein. In all cases a sharp decline in flux was observed which was, for example, considerably greater for soluble protein at its isoelectric point, pH 4.6, than at pH 8.8. The presence of precipitated protein led to a further decrease in flux rate. In cross-flow studies, flux decline was eventually accompanied by a significant decline in soluble protein transmission. The flux protein-transmission characteristics of microporous membranes are discussed in terms of the interaction of the soluble and precipitated protein with the membrane.     

A fermentor for study of sauerkraut fermentation

A fermentor was designed and constructed for study of the physical, microbiological, and chemical changes that occur during the sauerkraut fermentation. The fermentor has some essential features that include restriction in volume of the sauerkraut bed, construction of clear plastic to permit visual determination of liquid-level changes as a result of gas entrapment within the sauerkraut bed, and a gas-lift device for use in nitrogen purging of the fermenting brine. Fermentations exhibited two distinct stages, the first one gaseous and the second non-gaseous. The gaseous stage was characterized by rapid CO(2) and acid production due to growth by hetero-fermentative lactic acid bacteria with resultant gas entrapment within the sauerkraut bed and a rise in liquid level. Also, rapid disappearance of fructose and rapid appearance of mannitol occurred during this stage. The nongaseous stage was characterized by growth of homo-fermentative lactic acid bacteria with little or no CO(2) production and a gradual increase in lactic acid until all fermentable sugars were metabolized. Nitrogen purging appeared to offer several potential advantages, including a means for brine circulation, removal of CO(2) from the brine, and anaerobiosis to ensure retention of ascorbic acid, desirable color, and other oxygen-sensitive traits in sauerkraut.     

Production of optically active 2,3-butanediol by Bacillus polymyxa

Bacillus polymyxa produces (R, R)-2,3-butanediol from a variety of carbohydrates. Other metabolites are also produced including acetoin, acetate, lactate, and ethanol. The excretion of each metabolite was found to depend on the relative availability of oxygen to the culture. When the relative oxygen uptake rate was high, enhanced yields of acetate and acetoin were noted. At an intermediate oxygen availability, the butanediol yield was maximal. When the availability of oxygen was more restricted, higher yields of lactate and ethanol occurred. The cells appeared to regulate themselves such that energy generation is optimal subject to the constraint that the cells do not produce more reducing equivalents than can be oxidized by the electron transport system. The dependence of each product yield on the relative oxygen availability was determined, and this knowledge was used to carry out a fed-batch fermentation that attained a final butanediol concentration of over 40 g/L in 50 h.     

Kinetics of bilirubin oxidase and modeling of an immobilized bilirubin oxidase reactor for bilirubin detoxification

The unbound bilirubin concentration and the enzymatic rate of bilirubin degradation by bilirubin oxidase in bilirubin-serum albumin solutions have been investigated experimentally and theoretically. A stoichiometric bilirubin-serum albumin binding analysis shows that the unbound bilirubin concentration depends only on the molar ratio of the total bilirubin concentration to the total serum albumin concentration. From the theoretical analysis and the measured unbound bilirubin concentrations, serum albumin may be modelled as a molecule having two binding sites, primary and secondary, with stoichiometric equilibrium constants of K(1) = 6 x 10(7)M(-1) and K(2) = 4.5 x 10(6)M(-1), respectively. The rate of total bilirubin degradation in bilirubin-serum albumin mixtures is zero order. An immobilized bilirubin oxidase reactor model, which shows good agreement with experimental bilirubin conversions, is presented. At a flow rate of 1 mL/min with a 8-mL reactor volume, a 50% bilirubin conversion per pass was observed with an inlet bilirubin concentration of 350muM and a serum albumin concentration of 500muM.     

Effect of cycling on the stability of plasmid-bearing microorganisms in continuous culture

The implication of the possible existence of differences in the times required for plasmid-bearing and non-plasmid-bearing microorganisms to adjust their metabolic activities to step changes in their environment is examined. This adaptability difference suggests the possibility of maintaining an engineered strain in continuous culture by transient operation. It is shown for the case where adaptability is neglected that no cycling strategy will prevent the washout of the engineered strain, but the addition to the model of a time delay in substrate utilization can result in coexistence upon cycling. Numerical simulations of cycling in feed substrate concentration are carried out to illustrate the concept Operating diagrams are also constructed to indicate the conditions under which washout of the plasmid bearing strain can be prevented.