X-ray microCT study of pyramids of the sea urchin Lytechinus variegatus

This paper reports results of a novel approach, X-ray microCT, for quantifying stereom structures applied to ossicles of the sea urchin Lytechinus variegatus. MicroCT, a high resolution variant of medical CT (computed tomography), allows noninvasive mapping of microstructure in 3-D with spatial resolution approaching that of optical microscopy. An intact pyramid (two demipyramids, tooth epiphyses, and one tooth) was reconstructed with 17 microm isotropic voxels (volume elements); two individual demipyramids and a pair of epiphyses were studied with 9-13 microm isotropic voxels. The cross-sectional maps of a linear attenuation coefficient produced by the reconstruction algorithm showed that the structure of the ossicles was quite heterogeneous on the scale of tens to hundreds of micrometers. Variations in magnesium content and in minor elemental constitutents could not account for the observed heterogeneities. Spatial resolution was insufficient to resolve the individual elements of the stereom, but the observed values of the linear attenuation coefficient (for the 26 keV effective X-ray energy, a maximum of 7.4 cm(-1) and a minimum of approximately 2 cm(-1) away from obvious voids) could be interpreted in terms of fractions of voxels occupied by mineral (high magnesium calcite). The average volume fraction of mineral determined for a transverse slice of the demipyramid near where it joins an epiphysis was 0.46; for a slice 3.3 mm adoral it was 0.70. Local volume fractions of mineral approached 1, and, away from resolvable voids, considerable portions of the demipyramids had volume fractions of calcite at or below approximately 0.33. MicroCT imaging of a demipyramid before and after infiltration with a high absorptivity fluid (sodium polytungstate) confirmed the determination of the volume fractions of minerals.     

Jawing about TNF: new hope for cherubism

Mutations in the SH3-domain binding protein 2 (SH3BP2) are known to cause a rare childhood disorder called cherubism that is characterized by inflammation and bone loss in the jaw, but the mechanism has remained unclear. In this issue, Ueki et al. (Ueki et al., 2007) now demonstrate that a cherubism mutation activates mouse Sh3bp2 resulting in enhanced production of the cytokine TNF-alpha by myeloid cells, leading to both bone loss and inflammation.     

Protein kinase C has both stimulatory and suppressive effects on macrophage superoxide production.

Unlike resident peritoneal macrophages (RPM) or tumor necrosis factor alpha (TNF alpha)-primed bone marrow-derived macrophages (BMM), unprimed BMM do not generate superoxide in response to the protein kinase C (PKC) activator, phorbol myristate acetate (PMA). However, these cells do contain significant levels of PKC activity. In contrast to PMA, zymosan induces the generation of superoxide in unprimed BMM, as well as in TNF alpha-primed BMM and RPM. Staurosporine, a potent PKC inhibitor, failed to affect the zymosan-induced production of superoxide by unprimed and TNF alpha-primed BMM and RPM, in spite of substantial inhibition of PMA-induced superoxide production by the primed BMM and RPM. However, when PKC was depleted from unprimed BMM by prolonged (24 h) treatment with phorbol dibutyrate (PdBt) (10(-7) M) the ability of zymosan to induce the production of superoxide was greatly diminished. Such a result could be interpreted as suggesting a role for PKC in the zymosan-induced response, a conclusion which contrasts with the inhibitor data. However, PKC depletion, in this case, is achieved via the PdBt-induced activation of PKC. It is thus possible that it is the initial activation of PKC, rather than its depletion, that suppresses superoxide production. Consistent with this interpretation, the co-stimulation of unprimed BMM with both zymosan and PMA resulted in a reduced superoxide release compared to zymosan alone. The activation of PKC therefore appears to have a suppressive effect on the generation of superoxide by unprimed cells. We thus conclude that PKC is not required for zymosan-induced superoxide production by either primed or unprimed macrophages and suggest that PKC may be involved in regulatory mechanisms restricting superoxide production by macrophages. However, since PMA alone can initiate the release of superoxide from primed BMM and RPM, it would appear that PKC can mediate both stimulatory and suppressive signals for macrophage superoxide production.     

Near tubule and intertubular bovine dentin mapped at the 250 nm level

In this study, simultaneous diffraction and fluorescence mapping with a (250 nm)², 10.1 keV synchrotron X-ray beam investigated the spatial distribution of carbonated apatite (cAp) mineral and elemental Ca (and other cations including Zn) around dentin tubules. In 1 μm thick sections of near-pulp root dentin, where peritubular dentin (PTD) is newly forming, high concentrations of Zn, relative to those in intertubular dentin (ITD), were observed adjacent to and surrounding the tubule lumens. Some but not all tubules exhibited hypercalcified collars (high Ca signal relative to the surrounding ITD), and, when present, the zone of high Ca did not extend around the tubule. Diffraction rings from cAp 00.2 and 11.2 + 21.1 + 30.0 reflections were observed, and cAp was the only crystal phase detected. Profiles of Ca, Zn and cAp diffracted intensities showed the same transitions from solid to tubule lumen, indicating the same cAp content and organization in ITD far from the tubules and adjacent to them. Further, the matching Ca and diffraction profiles demonstrated that all of the Ca is in cAp or that any noncrystalline Ca was uniformly distributed throughout the dentin. Variation of 00.2 and 11.2 + 21.1 + 30.0 diffracted intensity was consistent with the expected biaxial crystallographic texture. Extension of X-ray mapping from near 1 μm resolution to the 250 nm level, performed here for dentin and its tubules, will provide new understanding of other mineralized tissues.     

Three-dimensional microarchitecture of the plates (primary, secondary, and carinar process) in the developing tooth of Lytechinus variegatus revealed by synchrotron X-ray absorption microtomography (microCT)

This paper reports the first noninvasive, volumetric study of entire cross-sections of a sea urchin tooth in which the individual calcite structural elements could be resolved. Two cross-sectionally intact fragments of a Lytechinus variegatus tooth were studied with synchrotron microCT (microcomputed tomography) with 1.66 microm voxels (volume elements). These fragments were from the plumula, that is the tooth zone with rapidly increasing levels of mineral; one fragment was from a position aboral of where the keel developed and the second was from the zone where the keel was developing. The primary plates, secondary plates, carinar process plates, prisms, and elements of the lamellar-needle complex were resolved. Comparison of the microCT data with optical micrographs of stained thin sections confirmed the identifications and measured dimensions of the characteristic microarchitectural features. The interplay of reinforcing structures (plates and prisms) was more clearly revealed in the volumetric numerical data sets than in single or sequential slices. While it is well known that the primary plates and prisms in camarodont teeth are situated to improve resistance to bending (which can be termed primary bending), the data presented provide a new understanding of the mechanical role of the carinar process plates, that is, a geometry consistent with that required in the keel to resist lateral or transverse bending of the tooth about a second axis. The increase in robustness of teeth incorporating lateral keel reinforcement suggests that the relative development of carinar processes (toward a geometry similar to that of L. variegatus) is a character which can be used to infer which sea urchins among the stirodonts are most primitive and among the camarodonts which are more primitive.