Effects of decreased atmospheric deposition on the sulfur budgets of two Dutch moorland pools

The chemical composition of surface waters of two Dutch moorland pools and of incident precipitation, was monitored from 1982 to 1990. For this period, sulfur and water budgets were calculated using a hydrochemical model developed for well-mixed non-stratifying lakes. Total atmospheric deposition of S decreased significantly after 1986 at both locations. A model describing the sulfur budget in terms of input, output and reduction/oxidation processes predicted a fast decrease of pool water SO₄ ²⁻ concentrations after a decrease of atmospheric input. However, SO₄ ²⁻ concentrations in the surface water was lowered only slightly or remained constant. Apparently a source within the lake caused the unexpectedly high SO₄ ²⁻ concentrations. The possible supply of SO₄ ²⁻ from the sediment through regulation by (K-)Al-SO₄ containing minerals or desorption of SO₄ ²⁻ from positively charged surfaces in the sediment was evaluated. Solubility calculations of pore water with respect to alunite, basaluminite and jurbanite indicated that SO₄ ²⁻ concentration was not regulated by these minerals. It is suggested here (1) that desorption of SO₄ ²⁻ from peaty sediments may account for the estimated SO₄ ²⁻ supply provided that the adsorption complex is periodically recharged by partial oxidation of the upper bottom sediments and (2) that because of exposure of a part of the pool bottom to the atmosphere during dry summers and subsequent oxidation of reduced S, the amount of SO₄ ²⁻ may be provided which complements the decreasing depositional SO₄ ²⁻ input. In future research these two mechanisms need to be investigated.     

Sulfate reduction and S-oxidation in a moorland pool sediment

In an oligotrophic moorland pool in The Netherlands, S cycling near the sediment/water boundary was investigated by measuring (1) SO₄ ^2– reduction rates in the sediment, (2) depletion of SO₄ ^2– in the overlying water column and (3) release of³⁵S from the sediment into the water column. Two locations differing in sediment type (highly organic and sandy) were compared, with respect to reduction rates and depletion of SO₄ ^2– in the overlying water.Sulfate reduction rates in sediments of an oligotrophic moorland pool were estimated by diagenetic modelling and whole core³⁵SO₄ ^2– injection. Rates of SO₄ ^2– consumption in the overlying water were estimated by changes in SO₄ ^2– concentration over time in in situ enclosures. Reduction rates ranged from 0.27–11.2 mmol m^–2 d^–1. Rates of SO₄ ^2– uptake from the enclosed water column varied from –0.5, –0.3 mmol m^–2 d^–1 (November) to 0.43–1.81 mmol m^–2 d^–1 (July, August and April). Maximum rates of oxidation to SO₄ ^2– in July 1990 estimated by combination of SO₄ ^2– reduction rates and rates of in situ SO₄ ^2– uptake in the enclosed water column were 10.3 and 10.5 mmol m^–2 d^–1 at an organic rich and at a sandy site respectively.Experiments with³⁵S^2– and³⁵SO₄ ^2– tracer suggested (1) a rapid formation of organically bound S from dissimilatory reduced SO₄ ^2– and (2) the presence of mainly non SO₄ ^2–-S derived from reduced S transported from the sediment into the overlying water. A³⁵S^2– tracer experiment showed that about 7% of³⁵S^2– injected at 1 cm depth in a sediment core was recovered in the overlying water column.Sulfate reduction rates in sediments with higher volumetric mass fraction of organic matter did not significantly differ from those in sediments with a lower mass fraction of organic matter.Corresponding author     

Lead Halide Perovskite Nanocrystals: Room Temperature Syntheses toward Commercial Viability

In this progress report, recent improvements to the room temperaturesyntheses of lead halide perovskite nanocrystals (APbX₃, X = Cl, Br, I) are assessed, focusing on various aspects which influence the commercial viability of the technology. Perovskite nanocrystals can be prepared easily from low‐cost precursors under ambient conditions, yet they have displayed near‐unity photoluminescence quantum yield with narrow, highly tunable emission peaks. In addition to their impressive ambipolar charge carrier mobilities, these properties make lead halide perovskite nanocrystals very attractive for light‐emitting diode (LED) applications. However, there are still many practical hurdles preventing commercialization. Recent developments in room temperature synthesis and purification protocols are reviewed, closely evaluating the suitability of particular techniques for industry. This is followed by an assessment of the wide range of ligands deployed on perovskite nanocrystal surfaces, analyzing their impact on colloidal stability, as well as LED efficiency. Based on these observations, a perspective on important future research directions that can expedite the industrial adoption of perovskite nanocrystals is provided.     

The Active and the Inactive Form of the hAT1 Receptor Have an Identical Ligand-Binding Environment: An MPA Study on a Constitutively Active Angiotensin II Receptor Mutant

Several models of activation mechanisms were proposed for G protein-coupled receptors (GPCRs), yet no direct methods exist for their elucidation. The availability of constitutively active mutants has given an opportunity to study active receptor conformations within acceptable limits using models such as the angiotensin II type 1 (AT₁)¹ receptor mutant N111G-hAT₁ which displays an important constitutive activity. Recently, by using methionine proximity assay, we showed for the hAT₁ receptor that TMD III, VI, and VII form the ligand-binding pocket of the C-terminal amino acid of an antagonistic AngII analogue. In the present contribution, we investigated whether the same residues would also constitute the ligand-binding contacts in constitutively activated mutant (CAM) receptors. For this purpose, the same Met mutagenesis strategy was carried out on the N111G double mutants. Analysis of 43 receptors mutants in the N111G-hAT₁ series, photolabeled and CNBr digested, showed that there were only subtle structural changes between the wt-receptor and its constitutively active form.     

Multifactorial diversity sustains microbial community stability

Maintenance of a high degree of biodiversity in homogeneous environments is poorly understood. A complex cheese starter culture with a long history of use was characterized as a model system to study simple microbial communities. Eight distinct genetic lineages were identified, encompassing two species: Lactococcus lactis and Leuconostoc mesenteroides. The genetic lineages were found to be collections of strains with variable plasmid content and phage sensitivities. Kill-the-winner hypothesis explaining the suppression of the fittest strains by density-dependent phage predation was operational at the strain level. This prevents the eradication of entire genetic lineages from the community during propagation regimes (back-slopping), stabilizing the genetic heterogeneity in the starter culture against environmental uncertainty.     

Purification of filamentous bacteriophage M13 by expanded bed anion exchange chromatography

In this paper, we investigated the development of a simplified and rapid primary capture step for the recovery of M13 bacteriophage from particulate-containing feedstock. M13 bacteriophage, carrying an insert, was propagated and subsequently purified by the application of both conventional multiple steps and expanded bed anion exchange chromatography. In the conventional method, precipitation was conducted with PEG/NaCl, and centrifugation was also performed. In the single step expanded bed anion exchange adsorption, UpFront FastLine 20 (20 mm i.d.) from UpFront Chromatography was used as the contactor, while 54 ml (Ho = 15 cm) of STREAMLINE DEAE (rho = 1.2 g/cm3) from Amersham Pharmacia Biotechnology was used as the anion exchanger. The performance of the two methods were evaluated, analysed, and compared. It was demonstrated that the purification of the M13 bacteriophage, using expanded bed anion exchange adsorption, yielded the higher recovery percentage, at 82.86%. The conventional multiple step method yielded the lower recovery percentage, 36.07%. The generic application of this integrated technique has also been assessed.     

On the 13C/12C isotopic signal of day and night respiration at the mesocosm level

While there is currently intense effort to examine the ¹³C signal of CO₂ evolved in the dark, less is known on the isotope composition of day‐respired CO₂. This lack of knowledge stems from technical difficulties to measure the pure respiratory isotopic signal: day respiration is mixed up with photorespiration, and there is no obvious way to separate photosynthetic fractionation (pure c_i/c_a effect) from respiratory effect (production of CO₂ with a different δ¹³C value from that of net‐fixed CO₂) at the ecosystem level. Here, we took advantage of new simple equations, and applied them to sunflower canopies grown under low and high [CO₂]. We show that whole mesocosm‐respired CO₂ is slightly ¹³C depleted in the light at the mesocosm level (by 0.2–0.8‰), while it is slightly ¹³C enriched in darkness (by 1.5–3.2‰). The turnover of the respiratory carbon pool after labelling appears similar in the light and in the dark, and accordingly, a hierarchical clustering analysis shows a close correlation between the ¹³C abundance in day‐ and night‐evolved CO₂. We conclude that the carbon source for respiration is similar in the dark and in the light, but the metabolic pathways associated with CO₂ production may change, thereby explaining the different ¹²C/¹³C respiratory fractionations in the light and in the dark.     

Rice bran lipase catalyzed esterification of palm oil fatty acid distillate and glycerol in organic solvent

Rice bran lipase (RBL) was delipidated to enhance its stability in organic solvent and its esterification activity at elevated temperature. The esterification activity of delipidated RBL increased as temperature was increased from 45 to 65°C. The esterification activity of delipidated RBL at 65°C was about 14 times greater than that of the non-delipidated RBL. As temperature was further increased to 75°C, the non-delipidated RBL lost all esterification activity, whereas the delipidated RBL retained approximately 48% of its esterilication activity. The delipidated RBL maintained a relative esterification activity greater than 80% after 16 h of incubation in hexane, whereas the non-delipidated RBL maintained a relative esterification activity of only 50%. A method for production of acylglycerol using delipidated RBL to esterify palm oil fatty acid distillate (PFAD) with glycerol in hexane was successfully developed. The effects of reaction temperatures and type of water removal agents (silica gel and molecular sieve) on the degree of esterification were also examined. A 4 h reaction at 65°C, catalyzed by delipidated RBL and using silica gel as the water removal agent resulted in 53.8% esterification. Thin layer chromatography analysis suggested that the esterified product was primarily comprised of mono-and di-acylglycerols.     

Genetic portrait of Lisboa immigrant population from Cabo Verde with mitochondrial DNA analysis

Journal of Genetics -