Alterations in the muscle-to-capillary interface in patients with different degrees of chronic obstructive pulmonary disease

Background

It is hypothesized that decreased capillarization of limb skeletal muscle is implicated in the decreased exercise tolerance in COPD patients. We have recently demonstrated decreased number of capillaries per muscle fibre (CAF) but no changes in CAF in relation to fibre area (CAFA), which is based on the diffusion distance between the capillary and muscle fibre. The aim of the current study is to investigate the muscle-to-capillary interface which is an important factor involved in oxygen supply to the muscle that has previously been suggested to be a more sensitive marker for changes in the capillary bed compared to CAF and CAFA.

Methods

23 COPD patients and 12 age-matched healthy subjects participated in the study. Muscle-to-capillary interface was assessed in muscle biopsies from the tibialis anterior muscle using the following parameters:1) The capillary-to-fibre ratio (C:F_i) which is defined as the sum of the fractional contributions of all capillary contacts around the fibre2) The ratio between C:F_i and the fibre perimeter (CFPE-index)3) The ratio between length of capillary and fibre perimeter (LC/PF) which is also referred to as the index of tortuosity.Exercise capacity was determined using the 6-min walking test.

Results

A positive correlation was found between CFPE-index and ascending disease severity with CFPE-index for type I fibres being significantly lower in patients with moderate and severe COPD. Furthermore, a positive correlation was observed between exercise capacity and CFPE-index for both type I and type IIa fibres.

Conclusion

It can be concluded that the muscle-to-capillary interface is disturbed in the tibialis anterior muscle in patients with COPD and that interface is strongly correlated to increased disease severity and to decreased exercise capacity in this patient group.     

Influence of denatured and intermediate states of folding on protein aggregation

We simulate the aggregation thermodynamics and kinetics of proteins L and G, each of which self-assembles to the same alpha/beta [corrected] topology through distinct folding mechanisms. We find that the aggregation kinetics of both proteins at an experimentally relevant concentration exhibit both fast and slow aggregation pathways, although a greater proportion of protein G aggregation events are slow relative to those of found for protein L. These kinetic differences are correlated with the amount and distribution of intrachain contacts formed in the denatured state ensemble (DSE), or an intermediate state ensemble (ISE) if it exists, as well as the folding timescales of the two proteins. Protein G aggregates more slowly than protein L due to its rapidly formed folding intermediate, which exhibits native intrachain contacts spread across the protein, suggesting that certain early folding intermediates may be selected for by evolution due to their protective role against unwanted aggregation. Protein L shows only localized native structure in the DSE with timescales of folding that are commensurate with the aggregation timescale, leaving it vulnerable to domain swapping or nonnative interactions with other chains that increase the aggregation rate. Folding experiments that characterize the structural signatures of the DSE, ISE, or the transition state ensemble (TSE) under nonaggregating conditions should be able to predict regions where interchain contacts will be made in the aggregate, and to predict slower aggregation rates for proteins with contacts that are dispersed across the fold. Since proteins L and G can both form amyloid fibrils, this work also provides mechanistic and structural insight into the formation of prefibrillar species.     

Multi Drug and Other Forms of Drug Resistant Tuberculosis Are Uncommon among Treatment Na?ve Tuberculosis Patients in Tanzania

Background

Surveillance and effective management of drug resistance is important to sustaining tuberculosis (TB) control efforts. We aimed to determine resistance rates to first line anti tuberculosis drugs and to describe factors associated with the resistance to any of the first line anti tuberculosis drugs in Dar es Salaam Tanzania.

Materials

Newly diagnosed, TB patients with neither history of tuberculosis treatment nor isoniazid prophylaxis were included into the study. Sputum specimens were cultured on either mycobacteria growth indicator tube 960 (MGIT 960) or Lowenstein Jenstein (LJ) medium supplemented with either glycerol (GLJ) or pyruvate (PLJ). Drug susceptibility for isoniazid, rifampicin, streptomycin and ethambutol was determined by either Lowenstein–Jensen (LJ) medium or mycobacteria growth indicator tube 960 (MGIT 960).

Results

A total of 933 newly diagnosed TB patients, were included into the study. Multi drug resistance (MDR) tuberculosis was detected among 2 (0.2%) patients. Resistance to any of the four tested drugs was detected among 54 (5.8%) patients. Mono-resistance to isoniazid, rifampicin, streptomycin and ethambutol were 21(2.3%), 3 (0.3%), 13 (1.4%), 9 (1.0%) respectively.

Conclusion

Primary resistance to first line anti tuberculosis drugs is still low in this setting. Continued vigilance including periodic national surveillance of anti-tuberculosis resistance is recommended.     

Chemical Composition and Pharmacological Evaluation and of Toddalia asiatica (Rutaceae) Extracts and Essential Oil by in Vitro and in Silico Approaches.

Toddalia asiatica (L.) Lam. is extensively used in traditional medicinal systems by various cultures. Despite its frequent use in traditional medicine, there is still a paucity of scientific information on T. asiatica growing on the tropical island of Mauritius. Therefore, the present study was designed to appraise the pharmacological and phytochemical profile of extracts (methanol, ethyl acetate and water) and essential oil obtained from aerial parts of T. asiatica. Biological investigation involved the evaluation of in vitro antioxidant and enzyme inhibitory potentials. The chemical profile of the EO was determined using gas chromatography coupled to mass spectrometry (GC/MS) analysis, while for the extracts, the total phenolic (TPC) and flavonoid content were quantified as well as their individual phenolic compounds by LC/MS/MS. Quinic acid, fumaric acid, chlorogenic acid, quercitrin and isoquercitrin were the main compounds in the extracts. Highest total phenolic (82.5±0.94 mg gallic acid equivalent (GAE/g)) and flavonoid (43.8±0.31 mg rutin equivalent (RE/g)) content were observed for the methanol extract. The GC/MS analysis has shown the presence of 26 compounds with linalool (30.9 %), linalyl acetate (20.9 %) and β-phellandrene (7.9 %) being most abundant components in the EO. The extracts and EO showed notable antioxidant properties, with the methanol extract proved to be superior source of antioxidant compounds. Noteworthy anti-acetylcholinesterase (AChE) and anti-butyrylcholinesterase (BChE) effects were recorded for the tested samples, while only the methanol and ethyl acetate extracts were active against tyrosinase. With respect to antidiabetic effects, the extracts and EO were potent inhibitors of α-glucosidase, while modest activity was recorded against α-amylase. Docking results showed that linalyl acetate has the highest affinity to interact with the active site of BChE with docking score of −6.25 kcal/mol. The findings amassed herein act as a stimulus for further investigations of this plant as a potential source of bioactive compounds which can be exploited as phyto-therapeutics.     

Two green and sensitive spectrofluorimetric approaches for determination of Ambroxol and guaifenesin in their single and combined pharmaceutical formulations

Ambroxol hydrochloride (AMX) and guaifenesin (GFN) are approved drugs utilized to treat coughs through their potent mucolytic and expectorant properties. Due to their massive, combined administration in many illnesses, there is a persistent need for their concurrent estimation in different pharmaceutical formulations. Two sensitive, environmentally friendly spectrofluorimetric methods were developed. AMX was determined using the first method (I) without interference from GFN. This method depends on the quenching of Erythrosine B (EB) native fluorescence at 552 nm after excitation at 527 nm due to the formation of a non-fluorescent AMX-EB ion-pair complex in Britton–Robinson buffer (BRB) solution pH (3.5). The concentration plot is linear over the 0.25–5.0 μg/mL range, with a mean percent found value of 99.74%. Method (II) depends on measuring the native fluorescence of aqueous GFN solution at two analytical wavelengths, either 300 or 600 nm, after excitation at 274 nm. Relative fluorescence intensity (RFI)–concentration plots are linear over the ranges of 0.02–0.5 and 0.1–2.0 μg/ml, with mean percent found at 99.96% and 99.91% at dual wavelengths, respectively. The proposed methods were successfully applied to assay both drugs in raw materials and different single and combined pharmaceutical formulations. These methods have been thoroughly validated following International Committee on Harmonisation (ICH) guidelines. National Environmental Methods Index, Analytical Eco-Scale, and Green Analytical Procedure Index were used to prove greenness, thereby enhancing their applicability. The proposed techniques provide straightforward, precise, and cost-effective solutions for routine formulation analysis in quality control laboratories.     

Production and purification of IgY antibodies from chicken egg yolk

The isolation of polyclonal antibodies from the serum of immunized mammals has significantly contributed to scientific research and diagnosis. The fact that recent technologies allow the production of antibodies in the yolk of eggs laid by hens, has led to the development of an alternative method for antibody generation that is less stressful to animals. As hens are kept under almost all their natural conditions, antibodies are isolated from the collected eggs; this technology is expected to become an interesting alternative to the conventionally serum-based techniques that eventually require to sacrifice the animal.Here we present a modified protocol for the isolation of IgY antibodies from immunized chickens and provide comparison between two chicken breeds in relative to IgY yield per egg. Our results show the possibility of generating large quantities of highly pure IgY from chicken eggs and also show large differences in the yield of IgY production between the two studied breeds. The results of this work indicate that IgY technology can be used for the production of primary antibodies for immunological work and disease diagnosis.     

SNAP-tag technology mediates site specific conjugation of antibody fragments with a photosensitizer and improves target specific phototoxicity in tumor cells

Cancer cells can be killed by photosensitizing agents that induce toxic effects when exposed to nonhazardous light, but this also causes significant damage to surrounding healthy cells. The specificity of photodynamic therapy can be increased by conjugating photosensitizing agents to antibodies and antibody fragments that bind specifically to tumor cell antigens. However, standard conjugation reactions produce heterogeneous products whose targeting specificity and spectroscopic properties can be compromised. In this study, we used an antibody fragment (scFv-425) that binds to the epidermal growth factor receptor (EGFR) as a model to investigate the use of SNAP-tag fusions as an improved conjugation strategy. The scFv-425-SNAP-tag fusion protein allowed the specific conjugation of a chlorin e6 photosensitizer modified with O(6)-benzylguanine, generating a homogeneous product that was delivered specifically to EGFR(+) cancer cells and resulted in significant, tumor cell-specific cytotoxicity. The impact of our results on the development of photodynamic therapy is discussed.     

Chemical composition and antibacterial activities of seven Eucalyptus species essential oils leaves

Background

In this paper, we have studied the essential oils chemical composition of the leaves of seven Eucalyptus species developed in Tunisia. Eucalyptus leaves were picked from trees growing in different arboretums in Tunisia. Choucha and Mrifeg arboretums located in Sedjnene, region of Bizerte (Choucha: E. maideni, E. astrengens et E. cinerea; Mrifeg : E. leucoxylon), Korbous arboretums located in the region of Nabeul, North East Tunisia with sub-humid bioclimate, (E. lehmani), Souiniet-Ain Drahem arboretum located in region of Jendouba (E. sideroxylon, E. bicostata). Essential oils were individually tested against a large panel of microorganisms including Staphylococcus aureus (ATCC 6539), Escherichia coli (ATCC 25922), Enterococcus faecalis (ATCC29212), Listeria ivanovii (RBL 30), Bacillus cereus (ATCC11778).

Results

The yield of essential oils ranged from 1.2% to 3% (w/w) for the different Eucalyptus species. All essential oils contain α-pinene, 1,8-cineol and pinocarveol-trans for all Eucalyptus species studied. The 1,8-cineol was the major compound in all species (49.07 to 83.59%). Diameter of inhibition zone of essential oils of Eucalyptus species varied from 10 to 29 mm. The largest zone of inhibition was obtained for Bacillus cereus (E. astrengens) and the lowest for Staphylococcus aureus (E. cinerea). The essential oils from E. maideni, E. astrengens, E. cinerea (arboretum of Bizerte), E. bicostata (arboretum of Aindraham) showed the highest antibacterial activity against Listeria ivanovii and Bacillus cereus.

Conclusion

The major constituents of Eucalyptus leaves essential oils are 1,8-cineol (49.07 to 83.59%) and α-pinene (1.27 to 26.35%). The essential oils from E. maideni, E. astrengens, E. cinerea, E. bicostata showed the highest antibacterial activity against Listeria ivanovii and Bacillus cereus, they may have potential applications in food and pharmaceutical products.     

Changes in physical,chemical and microbial parameters during the composting of municipal sewage sludge

Changes in physical, chemical and microbial parameters were investigated during the composting of municipal sewage sludge. Raw sewage sludge (30% dry matter) was mixed with compost from sewage sludge (85% dry matter) in 3:1 ratio (v/v). The mixture was divided into 4 windrows which were composted under the same conditions except the turning factor. The turning was every 7, 10, 15 days and according to the temperature which must be (55–65°C) for windrow 1 (W1), windrow 2 (W2), windrow 3 (W3) and windrow 4 (W4), respectively. Water was added to adjust the moisture content (40–60%). The composting process consisted of 2 periods; fermentation (12 weeks) and maturation (4 weeks). The results showed that the temperature reached the maximum after 12 weeks for W1 and 11 weeks for W2, W3 and W4 and then decreased. The final compost was nearly odourless and black, especially in case of W4. The general trend indicates a decrease in organic matter, organic carbon and nitrogen (N), whereas ash, potassium (K) and phosphorus (P) increased and consequently C/K and C/P ratios decreased. There was a slight increase in C/N ratio. The pH increased and then decreased to near neutrality at the end. The mesophilic bacteria increased during the fermentation period and decreased after that, whereas the thermophilic ones increased with increasing of temperature, decreased after 2 weeks and increased again during the fermentation period and then decreased. The mesophilic and thermophilic fungi were present during the first week and disappeared after that. The final compost was pathogens-free as indicated by the counts of coliforms and Salmonella.