Properties of an ionic liquid-tolerant <Emphasis Type="Italic">Bacillus</Emphasis><Emphasis Type="Italic">amyloliquefaciens</Emphasis> CMW1 and its extracellular protease

An ionic liquid-tolerant bacterium, Bacillus amyloliquefaciens CMW1, was isolated from a Japanese fermented soybean paste. Strain CMW1 grew in the presence of 10 % (v/v) 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), a commonly used ionic liquid. Additionally, strain CMW1 grew adequately in the presence of the hydrophilic ionic liquids 10 % (v/v) 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIM]CF₃SO₃) or 2.5 % (v/v) 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([BMIM]CF₃SO₃). Strain CMW1 produced an extracellular protease (BapIL) in the culture medium. BapIL was stable in the presence of 80 % (v/v) ionic liquids, [EMIM]CF₃SO₃, [BMIM]Cl, [BMIM]CF₃SO₃, 1-butyl-3-methylimidazolium tetrafluoroborate, 1-butyl-3-methylimidazolium hexafluorophosphate, and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, and functioned in 10 % (v/v) these ionic liquids. BapIL was stable at pH 4.0–12.6 or in 4004 mM NaCl solution, and exhibited activity in the presence of 50 % (v/v) hydrophilic or hydrophobic organic solvents. BapIL was completely inhibited by 1 mM PMSF and partially by 5 mM EDTA. BapIL belongs to the true subtilisins according to analysis of the deduced amino acid sequence. We showed that BapIL from the ionic liquid-tolerant B. amyloliquefaciens CMW1 exhibited tolerance to ionic liquid and halo, alkaline, and organic solvents.     

Lipase-catalyzed transesterification in several reaction systems: An application of room temperature lonic liquids for bi-phasic production ofn-butyl acetate

Organic solvents are widely used in biotransformation systems. There are many efforts to reduce the consumption of organic solvents because of their toxicity to the environment and human health. In recent years, several groups have started to explore novel organic solvents called room temperature ionic liquids in order to substitute conventional organic solvents. In this work, lipase-catalyzed transesterification in several uni-and bi-phasic systems was studied. Two representative hydrophobic ionic liquids based on 1-butyl-3-methylimidazolum coupled with hexafluorophosphate ([BMIM][PF₆]) and bis[(trifluoromethylsulfonyl) imide] ([BMIM] [Tf₂N]) were employed as reaction media for the transesterification ofn-butanol. The commercial lipase, Novozym 435, was used for the transesterification reaction with vinyl acetate as an acyl donor, The conversion yield was increased around 10% in a water/[BMIM][Tf₂N], bi-phasic system compared with that in a water/hexane system. A higher distribution of substrates into the water phase is believed to enhance the conversion yield in a water/[BMIM][Tf₂N] system. Partion coefficients of the substrates in the water/[BMIM][Tf₂N] bi-phasic system were higher than three times that found in the water/hexane system, while n-butyl acetate showed a similar distribution in both systems. Thus, RTILs appear to be a promising substitute of organic solvents in some biotransformation systems.     

The study of factors affecting the enzymatic hydrolysis of cellulose after ionic liquid pretreatment

Cellulose resource has got much attention as a promising replacement of fossil fuel. The hydrolysis of cellulose is the key step to chemical product and liquid transportation fuel. In this paper a serials of chloride, acetate, and formate based ionic liquids were used as solvents to dissolve cellulose. The cellulose regenerated from ILs was characterized by FTIR and X-ray powder diffraction. From the characterization and analysis, it was found that the original close and compact structure has changed a lot. After enzymatic hydrolysis, different kinds of ionic liquids (ILs) have different yields of the reducing sugar (TRS). They are 100%, 90.72%, and 88.92% from 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]), 1-butyl-3-methylimidazolium formate ([BMIM][HCOO]) respectively after enzymatic hydrolysis at 50 °C for 5 h. The results indicated that the yields and the hydrolysis rates were improved apparently after ILs pretreatment comparing with the untreated substrates.     

Lipase‐catalyzed enantioselective transesterification of prochiral 1‐((1,3‐dihydroxypropan‐2‐yloxy)methyl)‐5,6,7,8‐tetrahydroquinazoline‐2,4(1H,3H)‐dione in ionic liquids

The application of ionic liquids as solvents for transesterification of prochiral pirymidine acyclonucleoside using lipase (EC 3.1.1.3) Amano PS from Burkholderia cepacia (BCL) is reported. The effect of using medium reaction, acyl group donor, and temperature on the activity and enantioselectivity of BCL was studied. From the investigated ionic solvents, the hydrophobic ionic liquid [BMIM]PF₆] was the preferred medium for enzymatic reactions. However, the best result was obtained in the mixture [BMIM][PF₆]:TBME (1:1 v/v) at 50°C. Enzyme activity and selectivity in [BMIM][PF₆]:TBME (1:1 v/v) was slightly higher in than in conventional organic solvents (for example, TBME), and in this condition, good activity and enantioselectivity were associated with unique properties of ionic liquid such as hydrophobicity and high polarity. Independently of solvents, monester of (R)‐configuration was obtained in excess. Under optimal conditions, desymmetrization of the prochiral compound using different acyl donors was performed. If vinyl butyrate was used as the acylating agent, BCL completely selectively acylated enantiotopic hydroxyl groups.     

Bipyridylium quaternary salts and related compounds. V. Pulse radiolysis studies of the reaction of paraquat radical with oxygen. Implications for the mode of action of bipyridyl herbicides

1. Rate constants for reduction of paraquat ion (1,1′-dimethyl-4,4′-bipyridy-lium, PQ²⁺) to paraquat radical (PQ⁺·) by e⁻_aq and CO₂⁻· have been measured by pulse radiolysis. Reduction by e⁻_aq is diffusion controlled (k = 8.4·10¹⁰ M⁻¹·s⁻¹) and reduction by CO₂⁻· is also very fast k = 1.5·10¹⁰ M⁻¹·s⁻¹).

2. The reaction of paraquat radical with oxygen has been analysed to give rate constants of 7.7·10⁸ M⁻¹·s⁻¹ and 6.5·10⁸ M⁻¹·s⁻¹ for the reactions of paraquat radical with O₂ and O₂⁻·, respectively. The similarity in these rate constants is in marked contrast to the difference in redox potentials of O₂ and O₂⁻· (− 0.59 V and + 1.12 V, respectively).

3. These rate constants, together with that for the self-reaction of O₂⁻·, have been used to calculate the steady-state concentration of O₂⁻· under conditions thought to apply at the site of reduction of paraquat in the plant cell. On the basis of these calculations the decay of O₂⁻· appears to be governed almost entirely by its self-reaction, and the concentration 5 μm away from the thylakoid is still 90% of that at the thylakoid itself. Thus, O₂⁻· persists long enough to diffuse as far as the chloroplast envelope and tonoplast, which are the first structures to be damaged by paraquat treatment. O₂⁻· is therefore sufficiently long-lived to be a candidate for the phytotoxic product formed by paraquat in plants.     

Rb transport in Leishmania infantum promastigotes under various in vitro culture conditions

The survival of Leishmania, which encounter drastic changes of environment during their life-cycle, requires regulation and control of ionic concentrations within the cell. We analysed the influence of growth stage, ionic composition of the medium, heat and acidic stress on ⁸⁶Rb⁺ influx in L. infantum promastigetes. Proliferating promastigotes exibited faster and higher ⁸⁶Rb⁺ uptake than stationary cells. Cl⁻ anion did not have any effect, but in the presence of physiological concentration of HCO₃⁻, ⁸⁶Rb⁺ uptake was significantly increased. This enhancing effect was only partially inhibited by N,N′-dicyclohexylcarbodiimide (DCCD), a blocker of ion-translocating ATPases. ⁸⁶Rb⁺ influx was abolished by N-ethylmaleimide (NEM), indicating a major contribution of plasma membrane transporters. Heat shock and acidic shock notably decreased ⁸⁶Rb⁺ influx. Our data provide indirect evidence that an energy-dependent system which brings K⁺ in, such as K⁺/H⁺-ATPase evidenced by Jiang et al. (1994), is active in Leishmania in different environments. Mechanism(s) other than ion-translocating ATPase occur, at least in the presence of HCO₃⁻, and their contribution to K⁺ pathways varies in different environmental conditions.     

Ring rotation and anomalous metal atom motion in octamethyl ferrocene and spin-lattice relaxation in octamethyl ferrocenium hexafluorophosphate

The dynamics of the metal atom motion in sym octamethyl ferrocene (OMF) has been elucidated over the temperature range 85≤T≤350 K by ⁵⁷Fe Mössbauer effect spectroscopy, and shows a marked increase in the mean-square-amplitude of vibration at 348 K, some 80° below the melting point of the neat solid. Differential scanning calorimetry shows an endothermic peak at about the same temperature, and ΔH is 1.50 kJ mol⁻¹ and ΔS is 4.31 J mol⁻¹ K⁻¹. Corresponding data for OMF⁺PF₆⁻ can be fitted by a relaxation algorithm and confirm the intra-molecular nature of the transition. The spin-lattice relaxation over the above temperature range is fast compared to the characteristic Mössbauer time scale and can be accounted for by a Raman process in the high temperature limit. The transition at 348 K is associated with the onset of ring rotation/libration in the neat solid.     

Preparation of η-1,3-dienyl, η-1,2-dienyl and η-cyclobutenone complexes via reactions of transition-metal carbonyl containing anions with allenic electrophiles

The preparation and reaction chemistry of 1,3- and 1,2-diene and related complexes derived from metal carbonyl containing anions and allenic electrophiles are addressed. The preparation of some CpFe(CO)₂ η¹-diene complexes and their conversion into CpFe(CO) η³-diene complexes is presented followed by reactions of CpMo(CO)₃⁻, CpW(CO)₃⁻ and CpMo(CO)₂PR₃⁻ anions with allenic electrophiles which produce metal complexed cyclobutenones (via CO and alkene insertions from the initially formed product) and 1,2-diene complexes, respectively. Lastly, the reactions of PPh₃(CO)₃Co⁻ anions with allenic electrophiles are outlined which result in several different coordination geometries depending on the reaction conditions used.     

Kinetics of the reactions of nitrogen dioxide with glutathione,cysteine, and uric acid at physiological pH

Nitrogen dioxide (NO₂^•) is a key biological oxidant. It can be derived from peroxynitrite via the interaction of nitric oxide with superoxide, from nitrite with peroxidases, or from autoxidation of nitric oxide. In this study, submicromolar concentrations of NO₂^• were generated in < 1 μs using pulse radiolysis, and the kinetics of scavenging NO₂^• by glutathione, cysteine, or uric acid were monitored by spectrophotometry. The formation of the urate radical was observed directly, while the production of the oxidizing radical obtained on reaction of NO₂^• with the thiols (the thiyl radical) was monitored via oxidation of 2,2′-azino-bis-(3-ethylthiazoline-6-sulfonic acid). At pH 7.4, rate constants for reaction of NO₂^• with glutathione, cysteine, and urate were estimated as 2 × 10⁷, 5 × 10⁷, and 2 × 10⁷ M⁻¹ s⁻¹, respectively. The variation of these rate constants with pH indicated that thiolate reacted much faster than undissociated thiol. The dissociation of urate also accelerated reaction with NO₂^• at pH > 8. The thiyl radical from GSH reacted with urate with a rate constant of 3 × 10⁷ M⁻¹ s⁻¹. The implications of these values are: (i) the lifetime of NO₂^• in cytosol is < 10 μs; (ii) thiols are the dominant ‘sink’ for NO₂^• in cells/tissue, whereas urate is also a major scavenger in plasma; (iii) the diffusion distance of NO₂^• is 0.2 μm in the cytoplasm and < 0.8 μm in plasma; (iv) urate protects GSH against depletion on oxidative challenge from NO₂^•; and (v) reactions between NO₂^• and thiols/urate severely limit the likelihood of reaction of NO₂^• with NO• to form N₂O₃ in the cytoplasm.     

Kinetics and equilibria of Ga(III)---thiocyanate complex formation. Mechanism of ligand substitution reactions of Ga(III) in aqueous solution

The kinetics and equilibria of complex formation by Ga(III) with NCS⁻ in aqueous solution have been measured over a range of acidities and temperatures, the contributing paths to the reaction resolved, and their rate constants and activation parameters determined. The hydrolysis equilibria required to carry out this resolution of kinetic behaviour have also been measured.

Unlike the other reported complexation reactions of Ga(III) in aqueous solution, the separate reaction pathways can be assigned with no ambiguity. At 25 °C and ionic strength 0.5 M, the observed forward rate constant for the complex formation is described by {k₁ + k₂K_1h/[H⁺] + k₃K_1hK_2h/[H⁺]²} M⁻¹ s⁻¹. For these conditions, the first and second successive hydrolysis constants of Ga(H₂O)₆³⁺ are given by pK_1h = 3.69 ± 0.01 and pK_2h = 3.74 ± 0.04. The rate constants corresponding to the reactions of the species Ga(H₂O)₆³⁺, Ga(H₂O)₅(OH)²⁺ and Ga(H₂O)₄(OH)₂⁺ with NCS⁻ are k₁ = 57 ± 4 M^{−1 −1}, k₂ = (1.08 ± 0.01) × 10⁵ M⁻¹ s⁻¹ and k₃ = 3 × 10⁶ M⁻¹ s⁻¹ respectively. The complexation equilibrium quotient [GaNCS²⁺]/([Ga³⁺][NCS⁻]) has been independently determined by spectrophotometric titration to be 20.8 ± 0.3 M⁻¹ at 25 °C and ionic strength 0.5 M.

These kinetic results lead to an interpretation of the data, and a reinterpretation of other data for aquo-Ga(III) complex formation kinetics from the literature which support the assignment of a dissociative interchange mechanism for these reactions rather than the associative activation mode sometimes proposed.     

Use of ionic liquids as media for the biocatalytic preparation of flavonoid derivatives with antioxidant potency

Biocatalytic preparation of acylated derivatives of flavonoid glycosides was performed using various immobilized lipases in two different ionic liquids, namely 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim]BF(4)) and 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim]PF(6)). The influence of various reaction parameters on the performance and the regioselectivity of the biocatalytic process was pointed out, using as model reaction the acylation of naringin and rutin with vinyl butyrate, catalyzed by immobilized Candida antarctica lipase at 60 degrees C. The biocatalytic modification of flavonoids strongly depended on the ionic liquid used, the molar ratio of substrates, as well as the acyl donor chain length. The highest conversion yield (about 65% after 96 h of incubation) was obtained with short chain acyl donors (up to four carbon atoms), at a relatively high molar ratio (10-15) in both ionic liquids used. The amount of monoacylated flavonoid derivatives produced in a single-step biocatalytic process in [bmim]BF(4) was up to 5.5 g/L for monoacylated rutin and 30 g/L for monoacylated naringin. The regioselectivity of the process was higher in [bmim]BF(4) than in [bmim]PF(6) or organic solvents. Reaction rates observed in ionic liquids were up to four times higher than those reported for organic media. The acylation of sugar moiety of rutin with various acyl donors affected its antioxidant potential towards both isolated LDL and total serum model in vitro. A significant increase of antioxidant activity was observed for rutin-4'-O-oleate.     

Retention factors and resolutions of amino benzoic acid isomers with some lonic liquids

Ionic liquids in the form of organic salts are being widely used as new solvent media. In this paper three positional isomers,o-amino benzoic acid,m-amino benzoic acid, andp-amino benzoic acids were separated with four different ionic liquids as mobile phase additives using high performance liquid chromatography (HPLC). The following ionic liquids were used: 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIm][BF₄]), 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIm][BF₄]), 1-ethyl-3-methylimidazolium methylsulfate ([EMIm][MS]), and 1-octyl-3-methylimidazolium methylsulfate ([OMIm][MS]). The effects of the alkyl group length on the imidazolium ring and its counterion, and the concentrations of the ionic liquids on the retention factors and resolutions of amino benzoic acid isomers were tested. The results of the separations with ionic liquids as the eluents were better than those without ionic liquids. Excellent separations of the three isomers were achieved using 2.0≈8.0 mM/L [OMIm][MS] and 1.0≈8.0 mM/L [EMIm][MS] as the eluent modifiers.     

Stopped-flow mechanistic study of bromide substitution by an organonitrile at an iron(II) phosphinic centre; a π-electron driven process

The kinetics of the displacement reactions of the bromide ligands of trans-[FeBr₂(depe)₂] (depe = Et₂PCH₂CH₂PEt₂) by the organonitrile NCCH₂C₆H₄OMe-4, in tetrahydrofuran (either in the absence or in the presence of added Br⁻), to give the corresponding mono- and dinitrile complexes trans-[FeBr(NCCH₂C₆H₄OMe-4)(depe)₂]⁺ and trans-[Fe(NCCH₂C₆H₄OMe-4)₂(depe)₂]²⁺, have been investigated by stopped-flow spectrophotometry. The substitution reaction occurs by a mechanism involving rate-limiting dissociation of bromo ligands to form the unsaturated intermediates [FeBr(depe)₂]⁺ (k₁ = 1.52 ± 0.02 s⁻¹) and [Fe(NCR)(depe)₂]²⁺ (k₃ = 0.063 ± 0.008 s⁻¹) which add the nitrile ligand to form those nitrile complexes. The competition between the nitrile and Br⁻ for such metal centres has also been investigated and a stronger inhibiting effect of added Br⁻ is observed for the substitution of the second bromo ligand relative to the first one. The kinetic data are rationalized in terms of π-electronic effects of these unsaturated metal centres and of the bromide and nitrile ligands.     

Ion-pair mechanism in square planar substitution. Reactivity of cationic platinum (II) complexes with negatively charged nucleophiles in solvents of high, medium and low polarity

The rates of displacement of dimethyl sulfoxide from the cation [Pt(phen) (CH₃) (Me₂SO)]⁺ by a series of uncharged and negatively charged nucleophiles have been measured in a methanol/water (19:1 vol./vol.) mixture. The starting complex and the reaction products were characterized either as solids or in solution by their IR and ¹H NMR spectra. The substitution reactions take place by way of a direct bimolecular attack of the ligand on the substrate. The sequence of reactivity observed is as expected on the basis of a nucleophilicity scale relevant for + 1 charged substrates ([Pt(en) (NH₃)Cl]⁺ used as standard). The difference of reactivity between the first (t-BuNH₂) and the last (SeCN⁻) members of the series spans five orders of magnitude. The value measured for the nucleophilic discrimination (1.55) is the highest found so far for cationic substrates. This is a result of the easy transfer of some of the electron density brought in by the incoming ligand into the ancillary ligands. When the reaction is carried out in a series of protic and dipolar aprotic solvents, using chloride ion as nucleophile, the rate of formation of [Pt (phen) (CH₃)Cl] is dominated by the extent of solvation of Cl⁻, as measured by its values of the Gibbs molar energy of transfer Δ_tG⁰. Conductivity measurements at 25°C in dichloromethane were fitted to the Fuoss equation and the values of the dissociation constants K_d for the ion pairs were calculated as follows: 2.27 × 10⁻⁵ M for Bu₄NCl, 2.75 × 10⁻⁵ M for Bu₄NSCN and 17.05 × 10⁻⁵ M for [Pt(phen) (CH₃) (Me₂SO)]PF₆. The pseudo-first-order rate constants k_obs for the reactions with Bu₄NCl, Bu₄NBr, Bu₄NSCN and Bu₄NI showed a curvilinear dependence on the concentration of the salt which levels off very soon (at concentrations higher than 0.005 M the kinetics are zero order in [Bu₄NX]). On addition of the inert electrolyte Bu₄NPF₆ the rates slow down and the kinetics follow the rate law k_obs = kK_ip[Bu₄NX]/[Bu₄NPF₆] + K_ip[Bu₄NX]). These findings fit well with a reaction scheme which involves a pre-equilibrium K_ip between ion pairs, followed by unimolecular substitution within the contact ion pair [Pt(phen) (CH₃) (Me₂SO)X]_ip. Values of the equilibrium constants K_ip for ion-pair exchange and of the internal substitution rates k were derived. The latter showed that the discrimination in reactivity between Cl⁻, Br⁻, SCN⁻ and I⁻ is greatly reduced with respect to aqueous solutions. The reason behind this may be desolvation of the ions coupled to the fact that a contact ion pair is already at a certain distance along the reaction coordinate in the direction of the transition state. Applications of the special salt effect and of ion pairing to synthesis are discussed.     

Kinetics and mechanism of the oxidation of ammineruthenium(II) complexes by bromine

The reactions of Ru(NH₃)₅py²⁺, Ru(NH₃)₄bpy²⁺, Ru₂(NH₃)₁₀pz⁵⁺, RuRh(NH₃)₁₀pz⁵⁺ and Ru(NH₃)₅pz²⁺ with bromine are first-order in ruthenium and first-order in bromine. The rates decrease with increasing bromide ion concentration and, except for Ru(NH₃)₅pz²⁺, are independent of hydrogen ion concentration. The reactions are postulated to proceed via outer-sphere, one-electron transfer from Ru(II) to Br₂ with the formation of Br₂⁻ as a reactive intermediate. The bromide inhibition is ascribed to the formation of Br₃⁻ which is unreactive in outer-sphere reactions because of the barrier imposed by the need to undergo reductive cleavage. The reaction of Ru(NH₃)₅pz²⁺ is inhibited by hydrogen ions. The hydrogen ion dependence shows that Ru(NH₃)₅pzH³⁺ has a pK_a of 2.49 and is at least 500 times less reactive than Ru(NH₃)₅pz²⁺. The reaction of Ru₂(NH₃)₁₀pz⁴⁺ with bromine is biphasic. The second phase has a rate identical to that of the Ru₂(NH₃)₁₀pz⁵⁺-Br₂ reaction. A detailed analysis shows that the reaction of Ru₂(NH₃)₁₀pz⁴⁺ with bromine proceeds by a sequence of one-electron steps, Br₂⁻ being produced as an intermediate. A linear free energy relationship between rate constants and equilibrium constants, obeyed for all the reactions studied, provides an estimate of 1.5 × 10² M⁻¹ s⁻¹ for the self-exchange rate constant of the Br₂/Br₂⁻ couple.     

Dissolution of [RhCl(PPh3)3] in the ionic liquid, 1-ethyl-3-methyl imidazolium chloroaluminate(III), and its reaction with H2. The stabilization of Rh(I) species in an ionic liquid

The solution of [RhCl(PPh₃)₃] in acidic 1-ethyl-3-methylimidazolium chloroaluminate(III) ionic liquid (AlCl₃ molar fraction, x_AlCl3=0.67) was investigated by ¹H and ³¹P{¹H} NMR. One triphenyl phosphine is lost from the complex and is protonated in the acidic media, and cis-[Rh(PPh₃)₂ClX], (2), where X is probably [AlCl₄]⁻, is formed. On, standing, 2 is converted to trans-[Rh(H)(PPh₃)₂X], (3). The reaction of 2 and H₂ also produces trans-[Rh(H)(PPh₃)₂X], (3). ¹H and ³¹P{¹H} NMR support the suggestion that a weak ligand such as [AlCl₄]⁻, present in solution may interact with the metal centre. When [RhCl(PPh₃)₃] is dissolved in CH₂Cl₂/AlCl₃/HCl for comparison, two exchanging isomers of what is probably [RhH{(μ-Cl)₂AlCl₂}{(μ-Cl)AlCl₃}(PPh₃)₂], (6) and (7), are formed.     

Simultaneous production of two different gel-forming exopolysaccharides by an Alteromonas strain originating from deep sea hydrothermal vents

Exopolysaccharide production by the marine bacterium Alteromonas sp. strain 1644 was shown to be stimulated by restricted growth conditions and was optimized in nitrogen limited fed-batch cultures. Exopolysaccharides were either partly secreted in the medium or stayed firmly cell-associated. The cell-polysaccharide associations could be destroyed by dialysis against distilled water, allowing polysaccharide purification. The chemical and rheological characterization of this last polysaccharide showed that it was different from the secreted polysaccharide that has been previously described (polysaccharide 1644). At low ionic concentration (below 0.03 M whatever the nature of the ions), solutions of this new polysaccharide had very low viscosities. However, at higher ionic concentration, it formed a gel or exhibited in solution at low polymer concentration an unusually high temperature dependent viscosity. This behaviour was also dependent on the nature of the ions and the following sequences for cations and anions were NH4 ⁺ > Mg²⁺ > Na ⁺ > Li⁺ > K⁺ > TMA⁺ and Br⁻ > NO₃⁻ > SO₄²⁻ > Cl⁻ > I⁻ respectively.     

The reaction between the superoxide anion radical and cytochrome c

1. 1. The superoxide anion radical (O₂⁻) reacts with ferricytochrome c to form ferrocytochrome c. No intermediate complexes are observable. No reaction could be detected between O₂⁻ and ferrocytochrome c.

2. 2. At 20 °C the rate constant for the reaction at pH 4.7 to 6.7 is 1.4 · 10⁶ M⁻¹ · s⁻¹ and as the pH increases above 6.7 the rate constant steadily decreases. The dependence on pH is the same for tuna heart and horse heart cytochrome c. No reaction could be demonstrated between O₂⁻ and the form of cytochrome c which exists above pH ≈ 9.2. The dependence of the rate constant on pH can be explained if cytochrome c has pKs of 7.45 and 9.2, and O₂⁻ reacts with the form present below pH 7.45 with k = 1.4 · 10⁶ M⁻¹ · s⁻¹, the form above pH 7.45 with k = 3.0 · 10⁵ M⁻¹ · s⁻¹, and the form present above pH 9.2 with k = 0.

3. 3. The reaction has an activation energy of 20 kJ mol⁻¹ and an enthalpy of activation at 25 °C of 18 kJ mol⁻¹ both above and below pH 7.45. It is suggested that O₂⁻ may reduce cytochrome c through a track composed of aromatic amino acids, and that little protein rearrangement is required for the formation of the activated complex.

4. 4. No reduction of ferricytochrome c by HO₂ radicals could be demonstrated at pH 1.2–6.2 but at pH 5.3, HO₂ radicals oxidize ferrocytochrome c with a rate constant of about 5 · 10⁵–5 · 10⁶ M⁻¹ · s⁻¹

.     

含离子液体体系中固定化细胞转化甘草酸生成单葡萄糖醛酸基甘草次酸

研究疏水性离子液体1-丁基-3-甲基咪唑六氟磷酸盐([BMIM]PF6)与醋酸-醋酸钠缓冲液两相体系中,固定化产紫青霉Penicillium purpurogenum Li-3细胞转化甘草酸(GL)生成单葡萄糖醛酸基甘草次酸(GAMG)的反应,并与缓冲液单相体系作为对照.确定了在[BMIM]PF6/缓冲液两相体系中,最适离子液体加入比例、缓冲液pH、反应温度、底物浓度分别为10%、5.8、35℃和6.0mmol/L,在此条件下反应58h,甘草酸转化率为87.03%,比缓冲液单相体系提高了15.02%.离子液体循环使用8次后,回收利用率维持在85.28%.主产物GAMG和副产物甘草次酸(GA)在两相体系中得到有效分离,为后续产物分离带来便利.     

Elucidation of the effect of ionic liquid pretreatment on rice husk via structural analyses

ABSTRACT: BACKGROUND: In the present study, three ionic liquids, namely 1-butyl-3-methylimidazolium chloride ([BMIM]Cl), 1-ethyl-3-methylimidazolium acetate ([EMIM]OAc), and 1-ethyl-3-methylimidazolium diethyl phosphate ([EMIM]DEP), were used to partially dissolve rice husk, after which the cellulose were regenerated by the addition of water. The aim of the investigation is to examine the implications of the ionic liquid pretreatments on rice husk composition and structure. RESULTS: From the attenuated total reflectance Fourier transform-infrared (ATR FT-IR) spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM) results, the regenerated cellulose were more amorphous, less crystalline, and possessed higher structural disruption compared with untreated rice husk. The major component of regenerated cellulose from [BMIM]Cl and [EMIM]DEP pretreatments was cellulose-rich material, while cellulose regenerated from [EMIM]OAc was a matrix of cellulose and lignin. Cellulose regenerated from ionic pretreatments could be saccharified via enzymatic hydrolysis, and resulted in relatively high reducing sugars yields, whereas enzymatic hydrolysis of untreated rice husk did not yield reducing sugars. Rice husk residues generated from the ionic liquid pretreatments had similar chemical composition and amorphousity to that of untreated rice husk, but with varying extent of surface disruption and swelling. CONCLUSIONS: The structural architecture of the regenerated cellulose and rice husk residues showed that they could be used for subsequent fermentation or derivation of cellulosic compounds. Therefore, ionic liquid pretreatment is an alternative in the pretreatment of lignocellulosic biomass in addition to the conventional chemical pretreatments.