Sequence-specific labeling of superhelical DNA by triple helix formation and psoralen crosslinking.

Site-specific labeling of covalently closed circular DNA was achieved by using triple helix-forming oligonucleotides 10, 11 and 27 nt in length. The sequences consisted exclusively of pyrimidines (C and T) with a reactive psoralen at the 5'-end and a biotin at the 3'-end. The probes were directed to different target sites on the plasmids pUC18 (2686 bp), pUC18/4A (2799 bp) and pUC1 8/4A-H 1 (2530 bp). After triple helix formation at acid pH the oligonucleotides were photocrosslinked to the target DNAs via the psoralen moiety, endowing the covalent adduct with unconditional stability, e.g. under conditions unfavorable for preservation of the triplex, such as neutral pH. Complex formation was monitored after polyacrylamide gel electrophoresis by streptavidin-alkaline phosphatase (SAP)-induced chemiluminescence. The yield of triple helix increased with the molar ratio of oligonucleotide to target and the length of the probe sequence (27mer > 11mer). The covalent adduct DNA were visualized by scanning force microscopy (SFM) using avidin or streptavidin as protein tags for the biotin group on the oligonucleotide probes. We discuss the versatility of triple helix DNA complexes for studying the conformation of superhelical DNA.     

Oligonucleotide labeling methods. 3. Direct labeling of oligonucleotides employing a novel, non-nucleosidic, 2-aminobutyl-1,3-propanediol backbone.

Novel CE-phosphoramidite (7a-e) and CPG (8a, c, d, e) reagents have been prepared from a unique 2-aminobutyl-1,3-propanediol backbone. The reagents have been used to directly label oligonucleotides with fluorescein, acridine, and biotin via automated DNA synthesis. The versatile 2-aminobutyl-1,3-propanediol backbone allows for labeling at any position (5', internal, and 3') during solid phase oligonucleotide synthesis. Multiple labels can be achieved by repetitive coupling cycles. Furthermore, the 3-carbon atom internucleotide phosphate distance is retained when inserted internally. Using this method, individual oligonucleotides possessing two and three different reporter molecules have been prepared.     

Biotin-labeled synthetic oligodeoxyribonucleotides: chemical synthesis and uses as hybridization probes.

Oligodeoxynucleotides have been selectively labeled with biotin at their 5'-termini through an aminoalkylphosphoramide linker arm by an efficient chemical method. The reactions were performed in aqueous solution on unprotected oligonucleotides and were insensitive of the sequence and length of the oligonucleotide. 5'-biotin-labeled oligonucleotides were hybridized to dot, Southern and genomic blots of target plasmid DNA immobilized on nitrocellulose filters. Detection level is about 2 fmole. There is no noticeable disturbance of the strength and selectivity of hybridization of the 5'-biotin-labeled probes in comparison with non-modified DNA.     

A new approach to revealing point mutations in DNA analyzed by colorimetric detection

A new approach to detection of point mutations in an amplified DNA was developed. The approach is based on highly selective ligation (T4 DNA ligase) of a tandem of short oligonucleotides one of which contains the biotin group. The ligation product is formed only when the hybridization complex DNA/tandem is formed and the tandem is perfect. The hybridization complex DNA/(biotinylated ligation product) was separated from the biotinylated component of the tandem by UV-immobilization of the reaction mixture on a nylon membrane. The immobilized hybridization complex was detected colorimetrically by a streptavidin-alkaline phosphatase cojugate with a chromogenic substrate.     

Synthesis and hybridization of a series of biotinylated oligonucleotides.

A series of oligonucleotides containing biotin-11-dUMP at various positions were synthesized and compared in quantitative, colorimetric hybridization-detection studies. A deoxyuridine phosphoramidite containing a protected allylamino sidearm was synthesized and used in standard, automated synthesis cycles to prepare oligonucleotides with allylamino residues at various positions within a standard 17-base sequence. Biotin substituents were subsequently attached to the allylamino sidearms by reaction with N-biotinyl-6-aminocaproic acid N-hydroxysuccinimide ester. These oligomers were hybridized to target DNA immobilized on microtiter wells (ELISA plates), and were detected with a streptavidin-biotinylated horseradish peroxidase complex using hydrogen peroxide as substrate and o-phenylenediamine as chromogen. We found that the sensitivity of detection of target DNA by biotin-labeled oligonucleotide probes was strongly dependent upon the position of the biotin label. Oligonucleotides containing biotin labels near or off the ends of the hybridizing sequence were more effective probes than oligonucleotides containing internal biotin labels. An additive effect of increasing numbers of biotin-dUMP residues was found for some labeling configurations.     

A New Approach to Revealing Point Mutations in DNA Analyzed by Colorimetric Detection

A new approach to detection of point mutations in an amplified DNA was developed. The approach is based on highly selective ligation (T4 DNA ligase) of a tandem of short oligonucleotides one of which contains the biotin group. The ligation product is formed only when the hybridization complex DNA/tandem is formed and the tandem is perfect. The hybridization complex DNA/(biotinylated ligation product) was separated from the biotinylated component of the tandem by UV‐immobilization of the reaction mixture on a nylon membrane. The immobilized hybridization complex was detected colorimetrically by a streptavidin‐alkaline phosphatase cojugate with a chromogenic substrate.     

Lateral-flow and up-converting phosphor reporters to detect single-stranded nucleic acids in a sandwich-hybridization assay

Up-converting Phosphor Technology (UPT) particles were used as reporters in lateral-flow (LF) assays to detect single-stranded nucleic acids. The 400-nm phosphor particles exhibit strong visible luminescence upon excitation with infrared (IR) light resulting in the total absence of background autofluorescence from other biological compounds. A sandwich-type hybridization assay was applied using two sequence-specific oligonucleotides. One of the oligonucleotides probes was covalently bound to the UPT particle (reporter) for direct labeling and detection, whereas the second oligonucleotide probe contained biotin for capture by avidin during LF. The whole procedure of hybridization, UPT-LF detection, and analysis required a minimum time of 20 min. Moreover, aiming at minimal equipment demands, the hybridization conditions were chosen such that the entire assay could be performed at ambient temperature. During lateral flow, only targets hybridized to both capture and detection oligonucleotide were trapped and detected at an avidin capture line on the LF strip. Analysis (IR scanning) of the strips was performed in an adapted microtiter plate reader provided with a 980-nm IR laser for excitation of the phosphor particles (a portable reader was also available). Visible luminescence was measured and presented as relative fluorescence units (RFU) allowing convenient quantitation of the phosphor signal. With the assay described here as little as 0.1 fmol of a specific single-stranded nucleic acid target was detected in a background of 10 microg fish sperm DNA.     

Nonradioactive labeling of synthetic oligonucleotide probes with terminal deoxynucleotidyl transferase

Synthetic oligonucleotides were tailed at the 3' end using terminal deoxynucleotidyl transferase. Nucleotide triphosphates with free primary amines at the end of side chains were compared for their tailing efficiency and/or detection sensitivity, using biotin-11-dUTP as a reference. Free primary amines were tagged with activated biotin or fluorescein isothiocyanate. The probes were then detected with either streptavidin-alkaline phosphatase complex or anti-fluorescein antibodies and alkaline phosphatase-conjugated secondary antibodies. Tailing conditions were optimized and the probes were tested for detection of Escherichia coli ST1a enterotoxin DNA and rotavirus RNA.     

Characterization of biotinylated repair regions in reversibly permeabilized human fibroblasts.

We have examined the incorporation of biotinyl-11-deoxyuridine triphosphate (BiodUTP) into excision repair patches of UV-irradiated confluent human fibroblasts. Cells were reversibly permeabilized to BiodUTP with lysolecithin, and biotin was detected in DNA on nylon filters using a streptavidin/alkaline phosphatase colorimetric assay. Following a UV dose of 12 J/m2, maximum incorporation of BioUTP occurred at a lysolecithin concentration (80-100 micrograms/mL) similar to that for incorporation of dTTP. Incorporation of BiodUTP into repair patches increased with UV dose up to 4 and 8 J/m2 in two normal human fibroblast strains, while no incorporation of BiodUTP was observed in xeroderma pigmentosum (group A) human fibroblasts. The repair-incorporated biotin was not removed from the DNA over a 48-h period, and only slowly disappeared after longer times (approximately 30% in 72 h), while little of the biotin remained in cells induced to divide. Furthermore, the stability of the biotin in repaired DNA was unaffected by a second dose of UV radiation several hours after the biotin-labeling period to induce a "second round" of excision repair. Exonuclease III digestion and gap-filling with DNA polymerase I indicate that the majority of biotin-labeled repair patches (approximately 80%) are rapidly ligated in confluent human cells. However, the remaining patches were not ligated after a 24-h chase period, in contrast to dTTP-labeled repair patches. The BiodUMP repair label in both chromatin and DNA is preferentially digested by staphylococcal nuclease, preventing the use of this enzyme for nucleosome mapping in these regions.(ABSTRACT TRUNCATED AT 250 WORDS)     

Simple chemical synthesis and hybridization properties of non-radioactive DNA probes

A simple chemical method for the synthesis of non-radioactive DNA probes is described: triazolyl-containing sequences were built by incorporation of 4-triazolylpyrimidin-2-ones instead of cytidines during oligodeoxyribonucleotide synthesis. The activating triazolyl groups were then displaced by a diamine which was further derivatized by a label, such as biotin. Synthesized DNA probes were oligonucleotides complementary to a cloned human antithrombin III DNA sequence. These probes, containing the same label at different positions of the sequence, were hybridized to their target DNA immobilized on nitrocellulose. Their hybridization specificity and stability were studied. Hybrid detection was performed either colorimetrically by the streptavidin-alkaline phosphatase-based system or by autoradiography after 5'-32P labeling of the probes: 15 fmol (0.05 microgram) of complementary sequence could be visualized in the two cases.     

A nanoparticle amplification based quartz crystal microbalance DNA sensor for detection of Escherichia coli O157:H7

A quartz crystal microbalance (QCM) DNA sensor, based on the nanoparticle amplification method, was developed for detection of Escherichia coli O157:H7. A thiolated single-stranded DNA (ssDNA) probe specific to E. coli O157:H7 eaeA gene was immobilized onto the QCM sensor surface through self-assembly. The hybridization was induced by exposing the ssDNA probe to the complementary target DNA, and resulted in the mass change and therefore frequency change of the QCM. Streptavidin conjugated Fe(3)O(4) nanoparticles (average diameter=145 nm) were used as "mass enhancers" to amplify the frequency change. Synthesized biotinylated oligonucleotides as well as E. coli O157:H7 eaeA gene fragments (151 bases) amplified using asymmetric PCR with biotin labeled primers were tested. As low as 10(-12)M synthesized oligonucleotides and 2.67 x 10(2) colony forming unit (CFU)/ml E. coli O157:H7 cells can be detected by the sensor. Linear correlation between frequency change and logarithmic number of bacterial cell concentration was found for E. coli O157:H7 from 2.67 x 10(2) to 2.67 x 10(6)CFU/ml.     

Esterase 2-oligodeoxynucleotide conjugates as sensitive reporter for electrochemical detection of nucleic acid hybridization

A thermostable, single polypeptide chain enzyme, esterase 2 from Alicyclobacillus acidocaldarius, was covalently conjugated in a site specific manner with an oligodeoxynucleotide. The conjugate served as a reporter enzyme for electrochemical detection of DNA hybridization. Capture oligodeoxynucleotides were assembled on gold electrode via thiol-gold interaction. The esterase 2-oligodeoxynucleotide conjugates were brought to electrode surface by DNA hybridization. The p-aminophenol formed by esterase 2 catalyzed hydrolysis of p-aminophenylbutyrate was amperometrically determined. Esterase 2 reporters allows to detect approximately 1.5 x 10(-18)mol oligodeoxynucleotides/0.6 mm2 electrode, or 3 pM oligodeoxynucleotide in a volume of 0.5 microL. Chemically targeted, single site covalent attachment of esterase 2 to an oligodeoxynucleotide significantly increases the selectivity of the mismatch detection as compared to widely used, rather unspecific, streptavidin/biotin conjugated proteins. Artificial single nucleotide mismatches in a 510-nucleotide ssDNA could be reliably determined using esterase 2-oligodeoxynucleotide conjugates as a reporter.     

Triplex-forming ability of oligonucleotides containing 1-aryl-1,2,3-triazole nucleobases linked via a two atom-length spacer

Phosphoramidites containing 2-propynyloxy or 1-butyn-4-yl as nucleobase precursors were synthesized and introduced into oligonucleotides using an automated DNA synthesizer. Copper-catalyzed alkyne-azide 1,3-dipolar cycloaddition of the oligonucleotides with various azides gave the corresponding triazolylated oligonucleotides, triplex-forming ability of these synthetic oligonucleotides with double-stranded DNA targets was evaluated by UV melting experiments. It was found that nucleobases containing 2-(1-m-carbonylaminophenyl-1,2,3-triazol-4-yl)ethyl units likely interacted with A of a TA base pair in a parallel triplex DNA.     

Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization

A new type of coating for manufacturing DNA chips was constructed on the basis of an organicinorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm²) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5–1.6 pmol/mm². Immobilization with a higher density (10–12 pmol/mm²) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing a selectively activated terminal phosphate group. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.     

A highly sensitive and rapid method for the detection of DNA fragments using the photoprotein obelin as a reporter

The recombinant Ca²⁺-activated photoprotein obelin was used as a reporter protein in a solid-phase bioluminescent hybridization DNA assay. Oligonucleotide probes were immobilized on the surface of polymer methacrylate beads or microbiological plates of different types. A 30-mer oligonucleotide or its derivative with the biotin residue on the 3′-terminus, as well as a denatured double-stranded PCR fragment of the hepatitis C virus with the sequence of the 30-mer oligonucleotide was used as a DNA template. The probe in the hybridization complex was labeled by the elongation of the chain using a Taq DNA polymerase in the presence of biotinylated deoxyuridine triphosphate. The results of the bioluminescent assay were compared with the results of colorimetric analysis obtained with alkaline phosphatase as a reporter protein. It was shown that the use of the bioluminescent obelin label substantially accelerates the DNA detection procedure, provides a high sensitivity of the assay (no less than 10^?15 mol of DNA template), and ensures a quantitative determination of the amount of DNA template in the tested sample.     

Synthesis of biotin-containing phosphoramidite linker with polyether spacer arm

A phosphoramidite linker unit, based on glycerol backbone and containing a biotin residue attached through a tetraethylene glycol spacer arm, was synthesized. DMTr-Glycidol and tetraethylene glycol were used as starting materials. After conversion of one of hydroxy groups in tetraethylene glycol into an amino group, the epoxy cycle in DMTr-glycidol was opened by this amino alcohol, resulting in the corresponding ether and some quantity of secondary amine. After attaching of biotin residue to the ether followed by phosphitylation, the desirable linker was obtained. The structure of the linker was confirmed by (1)H-(1)H COSY, (1)H-(13)C HSQC, (1)H-(13)C HMBC, (1)H-(15)N HSQC, and (1)H-(15)N HMBC spectra. The resulted phosphoramidite linker unit is suitable for use in common DNA synthesizers. This approach can be used for preparation of various modifiers containing reporter groups attached to the primary amino function using conventional procedures.     

Streptavidin conjugates with gold nanoparticles for visualization of single DNA interactions on the silicon surface

Applicability of scanning electron microscopy (SEM) for visualization of individual acts of DNA hybridization with oligonucleotide probes has been investigated using gold nanoparticles as a label. DNA or oligonucleotides were labeled with biotin molecules, which were then detected in DNA duplexes using a streptavidin conjugate with gold nanoparticles. Effective imaging of DNA duplexes was possible using the conjugate prepared by covalent binding. The detection limit of the model oligonucleotide of 19 bases was 20 pg.     

Development of a colorimetric test system for detection of point mutations via ligation of a tandem of short oligonucleotides on methacrylate beads

A new approach for detection of point mutations has been developed. The nonradioactive test system proposed is based on enzymatic ligation of a tandem of three short oligonucleotides B∼pN₈+pN₄+pN′₈ Bio in the presence of a complementary DNA template. The 5′-terminal octanucleotide B∼pN₈ is immobilized on polymer methacrylate beads (B) and the 3′-terminal octanucleotide pN′₈ Bio contains a biotin residue at the 3′-phosphate. Ligation of the tandem produces a 20-mer biotinylated oligonucleotide on a polymer bead, which is then visualized via subsequent treatments with streptavidin-alkaline phosphatase conjugate and chromogenic substrates. Intense staining of the polymer beads is observed when the amount of DNA template (20-mer oligonucleotide) is as low as ∼10⁻¹⁴ mol. It is shown that practically no polymer staining is observed when the complex formed by the tandem and the 20-mer DNA template contains a mismatch either in the tetranucleotide duplex or in the duplex of octanucleotide immobilized on the beads. This suggests a possibility of using the presented approach in test systems for detection of point mutations in PCR-amplified DNA fragments.     

Functionalized nanocomposite coating of a glass surface for oligonucleotide immobilization

A new type of coating for manufacturing DNA chips was constructed of the basis of an organic-inorganic nanocomposite based on the polyvinylbutyral-tetraethoxysilane copolymer. The organosilicon composite was functionalized by introduction of ethanolamine vinyl ether copolymers, which contain amino groups and anchor vinyloxide units capable of reacting with silanol groups of the nanocomposite. The resulting coatings form a film on glass slides with a high surface density of amino groups (up to 700 groups/nm2) suitable for three-dimensional immobilization of oligonucleotides. The use of bifunctional reagents (e.g., phenylene diisothiocyanate) for the attachment of oligonucleotides bearing amino linkers to the amino-containing surface provides an immobilization density of 0.5-1.6 pmol/mm2. Immobilization with a higher density (10-12 pmol/mm2) was achieved for attachment to amino-containing glass slides upon the use of oligonucleotides containing selectively activated terminal phosphate groups. The activation of oligonucleotides was carried out with the triphenylphosphine-dithiodipyridine pair in the presence of dimethylaminopyridine N-oxide. The resulting DNA chips were shown to be useful in principle for DNA detection.