Estimation of the effective yield properties of human trabecular bone using nonlinear micro-finite element analyses

Micro-finite element (\(\upmu \)FE) analyses are often used to determine the apparent mechanical properties of trabecular bone volumes. Yet, these apparent properties depend strongly on the applied boundary conditions (BCs) for the limited size of volumes that can be obtained from human bones. To attenuate the influence of the BCs, we computed the yield properties of samples loaded via a surrounding layer of trabecular bone (“embedded configuration”). Thirteen cubic volumes (10.6 mm side length) were collected from \(\upmu \)CT reconstructions of human vertebrae and femora and converted into \(\upmu \)FE models. An isotropic elasto-plastic material model was chosen for bone tissue, and nonlinear \(\upmu \)FE analyses of six uniaxial, shear, and multi-axial load cases were simulated to determine the yield properties of a subregion (5.3 mm side length) of each volume. Three BCs were tested. Kinematic uniform BCs (KUBCs: each boundary node is constrained with uniform displacements) and periodicity-compatible mixed uniform BCs (PMUBCs: each boundary node is constrained with a uniform combination of displacements and tractions mimicking the periodic BCs for an orthotropic material) were directly applied to the subregions, while the embedded configuration was achieved by applying PMUBCs on the larger volumes instead. Yield stresses and strains, and element damage at yield were finally compared across BCs. Our findings indicate that yield strains do not depend on the BCs. However, KUBCs significantly overestimate yield stresses obtained in the embedded configuration (+43.1 ± 27.9%). PMUBCs underestimate (?10.0 ± 11.2%), but not significantly, yield stresses in the embedded situation. Similarly, KUBCs lead to higher damage levels than PMUBCs (+51.0 ± 16.9%) and embedded configurations (+48.4 ± 15.0%). PMUBCs are better suited for reproducing the loading conditions in subregions of the trabecular bone and deliver a fair estimation of their effective (asymptotic) yield properties.     

Towards the prediction of flow-induced shear stress distributions experienced by breast cancer cells in the lymphatics

Tumour metastasis in the lymphatics is a crucial step in the progression of breast cancer. The dynamics by which breast cancer cells (BCCs) travel in the lymphatics remains poorly understood. The goal of this work is to develop a model capable of predicting the shear stresses metastasising BCCs experience using numerical and experimental techniques. This paper models the fluidic transport of large particles (\(\eta =d_{\mathrm{p}}/W=0.1-0.4\) where \(d_{\mathrm{p}}\) is the particle diameter and W is the channel width) subjected to lymphatic flow conditions (\({ Re}=0.04\)), in a \(100\times 100\,\upmu \hbox {m}\) microchannel. The feasibility of using the dynamic fluid body interaction (DFBI) method to predict particle motion was assessed, and particle tracking experiments were performed. The experiments found that particle translational velocity decreased from the undisturbed fluid velocity with increasing particle size (5–14% velocity lag for \(\eta =0.1-0.3\)). DFBI simulations were found to better predict particle behaviour than theoretical predictions; however, mesh restrictions in the near-wall region (\(0.2\,\mathrm{W}>y>0.8\,\mathrm{W}\)) result in computationally expensive models. The simulations were in good agreement with the experiments (\(<12\%\) difference) across the channel (\(0.2\,\mathrm{W}\le y\le 0.8\,\mathrm{W}\)), with differences up to 25% in the near-wall region. Particles experience a range of shear stresses (0.002–0.12 Pa) and spatial shear gradients (\(0.004-0.137\,\hbox {Pa}/\upmu \hbox {m}\)) depending on their size and radial position. The predicted shear gradients are far in excess of values associated with BCC apoptosis (\(0.004-0.023\,\hbox {Pa}/\upmu \hbox {m}\)). Increasing our understanding of the shear stress magnitudes and gradients experienced by BCCs could be leveraged to elucidate whether a particular BCC size or location exists that encourages metastasis within the lymphatics.     

A novel real-time driving fatigue detection system based on wireless dry EEG

Development of techniques for detection of mental fatigue has varied applications in areas where sustaining attention is of critical importance like security and transportation. The objective of this study is to develop a novel real-time driving fatigue detection methodology based on dry Electroencephalographic (EEG) signals. The study has employed two methods in the online detection of mental fatigue: power spectrum density (PSD) and sample entropy (SE). The wavelet packets transform (WPT) method was utilized to obtain the \(\theta \) (4–7 Hz), \(\alpha \) (8–12 Hz) and \(\beta \) (13–30 Hz) bands frequency components for calculating corresponding PSD of the selected channels. In order to improve the fatigue detection performance, the system was individually calibrated for each subject in terms of fatigue-sensitive channels selection. Two fatigue-related indexes: (\(\theta +\alpha \))/\(\beta \) and \(\theta \)/\(\beta \) were computed and then fused into an integrated metric to predict the degree of driving fatigue. In the case of SE extraction, the mean of SE averaged across two EEG channels (‘O1h’ and ‘O2h’) was used for fatigue detection. Ten healthy subjects participated in our study and each of them performed two sessions of simulated driving. In each session, subjects were required to drive simulated car for 90 min without any break. The results demonstrate that our proposed methods are effective for fatigue detection. The prediction of fatigue is consistent with the observation of reaction time that was recorded during simulated driving, which is considered as an objective behavioral measure.     

Cell Volume Regulation in the Proximal Tubule of Rat Kidney

We developed a dynamic model of a rat proximal convoluted tubule cell in order to investigate cell volume regulation mechanisms in this nephron segment. We examined whether regulatory volume decrease (RVD), which follows exposure to a hyposmotic peritubular solution, can be achieved solely via stimulation of basolateral K\(^+\) and \(\hbox {Cl}^-\) channels and \(\hbox {Na}^+\)–\(\hbox {HCO}_3^-\) cotransporters. We also determined whether regulatory volume increase (RVI), which follows exposure to a hyperosmotic peritubular solution under certain conditions, may be accomplished by activating basolateral \(\hbox {Na}^+\)/H\(^+\) exchangers. Model predictions were in good agreement with experimental observations in mouse proximal tubule cells assuming that a 10% increase in cell volume induces a fourfold increase in the expression of basolateral K\(^+\) and \(\hbox {Cl}^-\) channels and \(\hbox {Na}^+\)–\(\hbox {HCO}_3^-\) cotransporters. Our results also suggest that in response to a hyposmotic challenge and subsequent cell swelling, \(\hbox {Na}^+\)–\(\hbox {HCO}^-_3\) cotransporters are more efficient than basolateral K\(^+\) and \(\hbox {Cl}^-\) channels at lowering intracellular osmolality and reducing cell volume. Moreover, both RVD and RVI are predicted to stabilize net transcellular \(\hbox {Na}^+\) reabsorption, that is, to limit the net \(\hbox {Na}^+\) flux decrease during a hyposmotic challenge or the net \(\hbox {Na}^+\) flux increase during a hyperosmotic challenge.     

Model of cellular mechanotransduction via actin stress fibers

Mechanical stresses due to blood flow regulate vascular endothelial cell structure and function and play a key role in arterial physiology and pathology. In particular, the development of atherosclerosis has been shown to correlate with regions of disturbed blood flow where endothelial cells are round and have a randomly organized cytoskeleton. Thus, deciphering the relation between the mechanical environment, cell structure, and cell function is a key step toward understanding the early development of atherosclerosis. Recent experiments have demonstrated very rapid (\(\sim \)100 ms) and long-distance (\(\sim \)10 \(\upmu \)m) cellular mechanotransduction in which prestressed actin stress fibers play a critical role. Here, we develop a model of mechanical signal transmission within a cell by describing strains in a network of prestressed viscoelastic stress fibers following the application of a force to the cell surface. We find force transmission dynamics that are consistent with experimental results. We also show that the extent of stress fiber alignment and the direction of the applied force relative to this alignment are key determinants of the efficiency of mechanical signal transmission. These results are consistent with the link observed experimentally between cytoskeletal organization, mechanical stress, and cellular responsiveness to stress. Based on these results, we suggest that mechanical strain of actin stress fibers under force constitutes a key link in the mechanotransduction chain.     

Prediction of apparent trabecular bone stiffness through fourth-order fabric tensors

The apparent stiffness tensor is an important mechanical parameter for characterizing trabecular bone. Previous studies have modeled this parameter as a function of mechanical properties of the tissue, bone density, and a second-order fabric tensor, which encodes both anisotropy and orientation of trabecular bone. Although these models yield strong correlations between observed and predicted stiffness tensors, there is still space for reducing accuracy errors. In this paper, we propose a model that uses fourth-order instead of second-order fabric tensors. First, the totally symmetric part of the stiffness tensor is assumed proportional to the fourth-order fabric tensor in the logarithmic scale. Second, the asymmetric part of the stiffness tensor is derived from relationships among components of the harmonic tensor decomposition of the stiffness tensor. The mean intercept length (MIL), generalized MIL (GMIL), and fourth-order global structure tensor were computed from images acquired through microcomputed tomography of 264 specimens of the femur. The predicted tensors were compared to the stiffness tensors computed by using the micro-finite element method (\(\upmu \)FE), which was considered as the gold standard, yielding strong correlations (\(R^2\) above 0.962). The GMIL tensor yielded the best results among the tested fabric tensors. The Frobenius error, geodesic error, and the error of the norm were reduced by applying the proposed model by 3.75, 0.07, and 3.16 %, respectively, compared to the model by Zysset and Curnier (Mech Mater 21(4):243–250, 1995) with the second-order MIL tensor. From the results, fourth-order fabric tensors are a good alternative to the more expensive \(\upmu \)FE stiffness predictions.     

Optimal foraging behavior with an explicit consideration of within-individual behavioral variation: an example of predation

Animal behavior is flexible, and the same individual can exhibit variable expressions under the equivalent ecological situations (i.e., within-individual behavioral variation). This study examines the evolution of within-individual behavioral variation using an individual-based model. A common predation scenario is considered where a predator spends a period h to handle and consume a captured prey. The model assumes the handling time of the predator to be a random variable. The average and within-individual variance of handling time are described by \(\mu _h\) and \(\sigma _h^2\), respectively, where each individual has its own unique \(\mu _h\) and \(\sigma _h^2\). Using a genetic algorithm, the evolution of \(\sigma _h^2\) is traced. The results show that natural selection acts on both \(\mu _h\) and \(\sigma _h^2\), and the optimal behavioral variation depends on the density of prey. In particular, individuals with high behavioral variance \(\sigma _h^2\) are more likely selected when prey density is low. Individual based modeling can be a useful tool for studying the ultimate significance of within-individual behavioral variation and generating empirically testable predictions. The mechanisms of the evolution of within-individual behavioral variation and their ecological implications are discussed.     

Cellular mechanosensitivity to substrate stiffness decreases with increasing dissimilarity to cell stiffness

Computational modelling has received increasing attention to investigate multi-scale coupled problems in micro-heterogeneous biological structures such as cells. In the current study, we investigated for a single cell the effects of (1) different cell-substrate attachment (2) and different substrate modulus \(\textit{E}_\mathrm{s}\) on intracellular deformations. A fibroblast was geometrically reconstructed from confocal micrographs. Finite element models of the cell on a planar substrate were developed. Intracellular deformations due to substrate stretch of \(\lambda =1.1\), were assessed for: (1) cell-substrate attachment implemented as full basal contact (FC) and 124 focal adhesions (FA), respectively, and \(\textit{E}_\mathrm{s}\,=\,\)140 KPa and (2) \(\textit{E}_\mathrm{s}\,=\,10\), 140, 1000, and 10,000 KPa, respectively, and FA attachment. The largest strains in cytosol, nucleus and cell membrane were higher for FC (1.35\(\text {e}^{-2}\), 0.235\(\text {e}^{-2}\) and 0.6\(\text {e}^{-2}\)) than for FA attachment (0.0952\(\text {e}^{-2}\), 0.0472\(\text {e}^{-2}\) and 0.05\(\text {e}^{-2}\)). For increasing \(\textit{E}_\mathrm{s}\), the largest maximum principal strain was 4.4\(\text {e}^{-4}\), 5\(\text {e}^{-4}\), 5.3\(\text {e}^{-4}\) and 5.3\(\text {e}^{-4}\) in the membrane, 9.5\(\text {e}^{-4}\), 1.1\(\text {e}^{-4}\), 1.2\(\text {e}^{-3}\) and 1.2\(\text {e}^{-3}\) in the cytosol, and 4.5\(\text {e}^{-4}\), 5.3\(\text {e}^{-4}\), 5.7\(\text {e}^{-4}\) and 5.7\(\text {e}^{-4}\) in the nucleus. The results show (1) the importance of representing FA in cell models and (2) higher cellular mechanical sensitivity for substrate stiffness changes in the range of cell stiffness. The latter indicates that matching substrate stiffness to cell stiffness, and moderate variation of the former is very effective for controlled variation of cell deformation. The developed methodology is useful for parametric studies on cellular mechanics to obtain quantitative data of subcellular strains and stresses that cannot easily be measured experimentally.     

A Mathematical Model Supports a Key Role for Ae4 (Slc4a9) in Salivary Gland Secretion

We develop a mathematical model of a salivary gland acinar cell with the objective of investigating the role of two \(\mathrm{Cl}^-/\mathrm{HCO}_3^-\) exchangers from the solute carrier family 4 (Slc4), Ae2 (Slc4a2) and Ae4 (Slc4a9), in fluid secretion. Water transport in this type of cell is predominantly driven by \(\mathrm{Cl}^-\) movement. Here, a basolateral \(\mathrm{Na}^+/ \mathrm{K}^+\) adenosine triphosphatase pump (NaK-ATPase) and a \(\mathrm{Na}^+\)–\(\mathrm{K}^+\)–\(2 \mathrm{Cl}^-\) cotransporter (Nkcc1) are primarily responsible for concentrating the intracellular space with \(\mathrm{Cl}^-\) well above its equilibrium potential. Gustatory and olfactory stimuli induce the release of \(\mathrm{Ca}^{2+}\) ions from the internal stores of acinar cells, which triggers saliva secretion. \(\mathrm{Ca}^{2+}\)-dependent \(\mathrm{Cl}^-\) and \(\mathrm{K}^+\) channels promote ion secretion into the luminal space, thus creating an osmotic gradient that promotes water movement in the secretory direction. The current model for saliva secretion proposes that \(\mathrm{Cl}^-/ \mathrm{HCO}_3^-\) anion exchangers (Ae), coupled with a basolateral \(\mathrm{Na}^+/\hbox {proton}\) (\(\hbox {H}^+\)) (Nhe1) antiporter, regulate intracellular pH and act as a secondary \(\mathrm{Cl}^-\) uptake mechanism (Nauntofte in Am J Physiol Gastrointest Liver Physiol 263(6):G823–G837, 1992; Melvin et al. in Annu Rev Physiol 67:445–469, 2005.  https://doi.org/10.1146/annurev.physiol.67.041703.084745). Recent studies demonstrated that Ae4 deficient mice exhibit an approximate \(30\%\) decrease in gland salivation (Peña-Münzenmayer et al. in J Biol Chem 290(17):10677–10688, 2015). Surprisingly, the same study revealed that absence of Ae2 does not impair salivation, as previously suggested. These results seem to indicate that the Ae4 may be responsible for the majority of the secondary \(\mathrm{Cl}^-\) uptake and thus a key mechanism for saliva secretion. Here, by using ‘in-silico’ Ae2 and Ae4 knockout simulations, we produced mathematical support for such controversial findings. Our results suggest that the exchanger’s cotransport of monovalent cations is likely to be important in establishing the osmotic gradient necessary for optimal transepithelial fluid movement.     

Simulation of extracellular matrix remodeling by fibroblast cells in soft three-dimensional bioresorbable scaffolds

To culture functional soft tissues and organs in three-dimensional scaffolds, it is essential to elucidate the optimal scaffold mechanical properties. However, mechanoregulated soft tissue remodeling is not well understood. In this study, we hypothesized that individual cells are capable of remodeling extracellular matrix within a short proximity of themselves in order to match the stiffness of the broader surrounding matrix. This theory was implemented in a three-dimensional finite element model to simulate soft tissue remodeling of human fibroblast cells in two collagen–chitosan scaffolds with different mechanical properties. Simulation results closely matched with previously reported experimental data, showing that soft tissue growth in compliant (Scaf-A, 4.30 kPa) and stiff (Scaf-B, 17.03 kPa) scaffolds led to an almost eightfold difference in the resulting stiffnesses after 10 days (8.40 kPa for Scaf-A, 59.25 kPa for Scaf-B). Furthermore, varying the simulated rate for tissue remodeling by \(\pm \)50 % caused unequal changes in the resulting stiffness (+3.6 and \(-\)23 % for Scaf-A, +5 and \(-\)17 % for Scaf-B), and \(\pm \)50 % changes in the assumed upper limit on tissue stiffness only had larger effects on the stiff scaffold (+42 and \(-\)44 % for Scaf-B). These results reinforce the notion that soft tissue remodeling is governed by the stiffness of the surrounding matrix, until meeting an upper limit on tissue stiffness.     

Isolation and characterization of microsatellite markers in the spiny lobster, <Emphasis Type="Italic">Panulirus echinatus</Emphasis> Smith, 1869 (Decapoda: Palinuridae) by Illumina MiSeq sequencing

Okra’s (Abelmoschus esculentus (L.) Moench) commercial cultivation is threatened in the tropics due to high incidence of yellow vein mosaic virus (YVMV) disease. Okra geneticists across the world tried to understand the inheritance pattern of YVMV disease tolerance without much success. Therefore, the inheritance pattern of YVMV disease in okra was revisited by employing six generations (\(\hbox {P}_{1}\), \(\hbox {P}_{2}\), \(\hbox {F}_{1}\), \(\hbox {F}_{2}\), \(\hbox {BC}_{1}\) and \(\hbox {BC}_{2}\)) of four selected crosses (one tolerant \(\times \) tolerant, two tolerant \(\times \) susceptible and one susceptible \(\times \) susceptible) using two tolerant (BCO-1 and Lal Bhendi) and two susceptible (Japanese Jhar Bhendi and PAN 2127) genotypes. Qualitative genetic analysis was done on the basis of segregation pattern of tolerant and susceptible plants in \(\hbox {F}_{2}\) and backcross generations of all the four crosses. It revealed that a single dominant gene along with some minor factors governed the disease tolerant trait in both the tolerant parents used. However, it was observed that genes governing disease tolerance identified in both the tolerant variety used was different. It could be concluded that the gene governing YVMV disease tolerance in okra was genotype specific. Further, duplicate gene action as evident from an approximate ratio of 15 : 1 (tolerant : susceptible) in the \(\hbox {F}_{2}\) population in the cross of two tolerant varieties gave a scope of increasing the tolerance level of the hybrid plants when both the tolerant genes are brought together. However, generation mean analysis revealed involvement of both additive and nonadditive effects in the inheritance of disease tolerance. Thus, the present study confirms that a complicated genetic inheritance pattern is involved in the disease tolerance against YVMV trait. The major tolerance genes could be transferred to other okra varieties, but the tolerance breaking virus strains might not allow them to achieve tolerance in stable condition. Therefore, accumulation of additional genes may be needed for a sustainable tolerance phenotype in okra.     

A threshold of mechanical strain intensity for the direct activation of osteoblast function exists in a murine maxilla loading model

The response to the mechanical loading of bone tissue has been extensively investigated; however, precisely how much strain intensity is necessary to promote bone formation remains unclear. Combination studies utilizing histomorphometric and numerical analyses were performed using the established murine maxilla loading model to clarify the threshold of mechanical strain needed to accelerate bone formation activity. For 7 days, 191 kPa loading stimulation for 30 min/day was applied to C57BL/6J mice. Two regions of interest, the AWAY region (away from the loading site) and the NEAR region (near the loading site), were determined. The inflammatory score increased in the NEAR region, but not in the AWAY region. A strain intensity map obtained from \(\upmu \hbox {CT}\) images was superimposed onto the images of the bone formation inhibitor, sclerostin-positive cell localization. The number of sclerostin-positive cells significantly decreased after mechanical loading of more than \(150\,{\upmu }{\upvarepsilon }\) in the AWAY region, but not in the NEAR region. The mineral apposition rate, which shows the bone formation ability of osteoblasts, was accelerated at the site of surface strain intensity, namely around \(170\,{\upmu }{\upvarepsilon }\), but not at the site of lower surface strain intensity, which was around \(80\,{\upmu }{\upvarepsilon }\) in the AWAY region, thus suggesting the existence of a strain intensity threshold for promoting bone formation. Taken together, our data suggest that a threshold of mechanical strain intensity for the direct activation of osteoblast function and the reduction of sclerostin exists in a murine maxilla loading model in the non-inflammatory region.     

Backbone resonance assignments for the SET domain of the human methyltransferase NSD2

Aberrant NSD2 methyltransferase activity is implicated as the oncogenic driver in multiple myeloma, suggesting opportunities for novel therapeutic intervention. The methyltransferase activity of NSD2 resides in its catalytic SET domain, which is conserved among most lysine methyltransferases. Here we report the backbone \(\hbox {H}^{\mathrm{N}}\), N, C\(^{\prime }\), \(\hbox {C}^\alpha\) and side-chain \(\hbox {C}^\beta\) assignments of a 25 kDa NSD2 SET domain construct, spanning residues 991–1203. A chemical shift analysis of C\(^{\prime }\), \(\hbox {C}^\alpha\) and \(\hbox {C}^\beta\) resonances predicts a secondary structural pattern that is in agreement with homology models.     

A genetic variant in COL11A1 is functionally associated with lumbar disc herniation in Chinese population

This study aimed to explore whether the genetic variant of COL11A1 is functionally associated with the development of lumbar disc herniation (LDH) in Chinese population. SNP rs1676486 of COL11A1 was genotyped in 647 patients and 532 healthy controls. The differences of genotype and allele distributions between LDH patients and healthy controls were evaluated using the \(\upchi ^{2}\) test. One-way ANOVA test was used to compare the relationship between genotypes and clinical features including tissue expression of COL11A1 and the degree of disc degeneration. Patients were found to have a significantly higher frequency of TT than the controls (10.2% versus 7.3%, \(P=0.004\)). Besides, the frequency of allele T was found to be remarkably higher in the patients than the controls (34.8% versus 28.1%, \(P < 0.001\)) with an odds ratio of 1.36 (95% confidential interval \(=\) 1.14–1.63). Patients with genotype TT were found to have remarkably more severe disc degeneration (\(P=0.02\)). Besides, the expression of COL11A1 in the lumbar disc was significantly lower in the patients with genotype TT than in those with genotype CT or CC (\(P < 0.001\)). Moreover, the expression level was inversely correlated with the severity of disc degeneration (\(P < 0.001\)). We confirmed that the rs1676486 of COL11A may be functionally associated with LDH in the Chinese population. Extracellular matrix related proteins may play an important role in the pathogenesis of LDH. Our findings shed light on a better understanding of the pathogenesis of LDH, which could be a promising target for a novel treatment modality of LDH.     

Analysis of two susceptibility SNPs in HLA region and evidence of interaction between rs6457617 in <Emphasis Type="BoldItalic">HLA-DQB1</Emphasis> and <Emphasis Type="BoldItalic">HLA-DRB1</Emphasis>*04 locus on Tunisian rheumatoid arthritis

Previous genomewide association studies (GWAS) and meta-analyses have enumerated several genes/loci in major histocompatibility complex region, which are consistently associated with rheumatoid arthritis (RA) in different ethnic populations. Given the genetic heterogeneity of the disease, it is necessary to replicate these susceptibility loci in other populations. In this case, we investigate the analysis of two SNPs, rs13192471 and rs6457617, from the human leukocyte antigen (HLA) region with the risk of RA in Tunisian population. These SNPs were previously identified to have a strong RA association signal in several GWAS studies. A case–control sample composed of 142 RA patients and 123 healthy controls was analysed. Genotyping of rs13192471 and rs6457617 was carried out using real-time PCR methods by TaqMan allelic discrimination assay. A trend of significant association was found in rs6457617 TT genotype with susceptibility to RA (\(P = 0.04\), \(p_{c} = 0.08\), \(\hbox {OR} = 1.73\)). Moreover, using multivariable analysis, the combination of rs6457617*TT–HLA-DRB1*\(04^{+}\) increased risk of RA (\(\hbox {OR} = 2.38\)), which suggest a gene–gene interaction event between rs6457617 located within the HLA-DQB1 and HLA-DRB1. Additionally, haplotypic analysis highlighted a significant association of rs6457617*T–HLA-DRB1*\(04^{+}\) haplotype with susceptibility to RA (\(P = 0.018\), \(p_{c} = 0.036\), \(\hbox {OR} = 1.72\)). An evidence of association was shown subsequently in \(\hbox {antiCCP}^{+}\) subgroup with rs6457617 both in T allele and TT genotype (\(P = 0.01\), \(p_{c} = 0.03\), \(\hbox {OR} = 1.66\) and \(P = 0.008\), \(p_{c} = 0.024\), \(\hbox {OR} = 1.28\), respectively). However, no association was shown for rs13192471 polymorphism with susceptibility and severity to RA. This study suggests the involvement of rs6457617 locus as risk variant for susceptibility/severity to RA in Tunisian population. Secondly, it highlights the gene–gene interaction between HLA-DQB1 and HLA-DRB1.     

Polymorphism detection of promoter region of IFN-$$\gamma $$ and IL-2 genes and their association with productive traits in Mazandaran native breeder fowls

To identify polymorphism in interferon gamma (IFN-\(\upgamma \)) and interleukin-2 (IL-2) genes, blood samples were collected from 380 breeder hens of the Mazandaran native fowls breeding station. DNA extraction was performed through a modified salting-out method and fragments of 670 and 659 bp from the promoter regions of IFN-\(\upgamma \) and IL-2 genes were amplified by using specific primers, respectively. Following genotyping in the IFN-\(\upgamma \) gene using the Tsp509I restriction enzyme, two alleles of A and G with the frequencies of 0.55 and 0.45 and three genotypes of AA, AG and GG were observed with the frequencies of 0.32, 0.46 and 0.22, respectively. For the IL-2 gene, two alleles of A and G were also detected using the MnlI restriction enzyme with the frequencies of 0.58 and 0.42 and three genotypes of AA, AG and GG with the frequencies of 0.33, 0.50 and 0.17, respectively. Statistical analysis revealed significant associations between IL-2 gene single-nucleotide polymorphism and productive traits including the average egg weight (EW) at 345–375 days of age, egg number (EN) at 345–375 days of age and body weight (BW) at 8 weeks of age traits (\(P{<}0.05\)). Further, in a mean comparison analysis, there were also significant differences between different genotypes of the IL-2 gene in average EW at 28 and 30 weeks of age, in which AG genotypes showed higher performance. Additionally, for the IFN-\(\upgamma \) gene, a significant difference was found between the genotypes in average EW at 28 weeks of age trait. Therefore, it can be concluded that the above-mentioned polymorphisms could be considered as the pivotal genetic makers to improve Mazandaran native fowl breeding programmes to achieve the optimum performance in productive traits more efficiently.     

Influence of muscle groups’ activation on proximal femoral growth tendency

Muscle and joint contact force influence stresses at the proximal growth plate of the femur and thus bone growth, affecting the neck shaft angle (NSA) and femoral anteversion (FA). This study aims to illustrate how different muscle groups’ activation during gait affects NSA and FA development in able-bodied children. Subject-specific femur models were developed for three able-bodied children (ages 6, 7, and 11 years) using magnetic resonance images. Contributions of different muscle groups—hip flexors, hip extensors, hip adductors, hip abductors, and knee extensors—to overall hip contact force were computed. Specific growth rate for the growth plate was computed, and the growth was simulated in the principal stress direction at each element in the growth front. The predicted growth indicated decreased NSA and FA (of about \(0.1 {^{\circ }}\) over a four-month period) for able-bodied children. Hip abductors contributed the most, and hip adductors, the least, to growth rate. All muscles groups contributed to a decrease in predicted NSA (\(\sim \)0.01\({^{\circ }}\)–0.04\({^{\circ }})\) and FA (\(\sim \)0.004\({^{\circ }}\)–\(0.2{^{\circ }}\)), except hip extensors and hip adductors, which showed a tendency to increase the FA (\(\sim \)0.004\({^{\circ }}\)–\(0.02{^{\circ }}\)). Understanding influences of different muscle groups on long bone growth tendency can help in treatment planning for growing children with affected gait.