Establishment of functional primary cultures of heart cells from the clam <Emphasis Type="Italic">Ruditapes decussatus</Emphasis>

Heart cells from the clam Ruditapes decussatus were routinely cultured with a high level of reproducibility in sea water based medium. Three cell types attached to the plastic after 2 days and could be maintained in vitro for at least 1 month: epithelial-like cells, round cells and fibroblastic cells. Fibroblastic cells were identified as functional cardiomyocytes due to their spontaneous beating, their ultrastructural characteristics and their reactivity with antibodies against sarcomeric α-actinin, sarcomeric tropomyosin, myosin and troponin T-C. Patch clamp measurements allowed the identification of ionic currents characteristic of cardiomyocytes: a delayed potassium current (I _K slow) strongly suppressed (95%) by tetraethylammonium (1 mM), a fast inactivating potassium current (I _K fast) inhibited (50%) by 4 amino-pyridine at 1 mM and, at a lower level (34%) by TEA, a calcium dependent potassium current (I _KCa) activated by strong depolarization. Three inward voltage activated currents were also characterized in some cardiomyocytes: L-type calcium current (I _Ca) inhibited by verapamil at 5 × 10⁻⁴ M, T-type Ca²⁺ current, rapidly activated and inactivated, and sodium current (I _Na) observed in only a few cells after strong hyperpolarization. These two currents did not seem to be physiologically essential in the initiation of the beatings of cardiomyocytes. Potassium currents were partially inhibited by tributyltin (TBT) (1 μM) but not by okadaic acid (two marine pollutants). DNA synthesis was also demonstrated in few cultured cells using BrdU (bromo-2′-deoxyuridine). Observed effects of okadaic acid and TBT demonstrated that cultured heart cells from clam Ruditapes decussatus can be used as an experimental model in marine toxicology.     

Cloning and expression of selenocysteine methyltransferase cDNA from <Emphasis Type="Italic">Camellia sinensis</Emphasis>

Selenocysteine methyltransferase (SMT), specifically methylates selenocysteine (SeCys) to produce the nonprotein amino acid Se-methyl selenocysteine (SeMSC) and played key role of removing selenium toxic effect at higher levels to the plant. Here we report the cloning of a cDNA encoding selenocysteine methyltransferase from Camellia sinensis (CsSMT) and expression of CsSMT in Escherichia coli. CsSMT isolated by RT-PCR and RACE-PCR reaction. CsSMT is a 1,401 bp cDNA with an open reading frame predicted to encode a 351 amino acid, 40.5 kDa protein; The predicted amino acid sequences of CsSMT shows 74% identity with A. bisulcatus selenocysteine methyltransferase (AbSMT) and 69% identity with Broccoli (Brassica oleracea var. italica) selenocysteine methyltransferase (BoSMT), and shares 53, 73 and 65% identity, respectively, with Arabidopsis thaliana homocysteine S-methyltransferase AtHMT1, AtHMT2, and AtHMT3, and 65% to Zea mays homocysteine S-methyltransferase (ZmHMT2). Analyses of CsSMT showed that it lacks obvious chloroplast or mitochondrial targeting sequences and contains a consensus sequence of GGCC for a possible zinc-binding motif near the C-terminal and a conserved Cys residue upstream of the zinc-binding motif as other related methyltransferases. Expression of CsSMT correlated with the presence of SMT enzyme activity in cell extracts, and bacteria containing recombinant CsSMT plasmid showed much high tolerance to selenate and selenite.     

Cloning and expression of <Emphasis Type="SmallCaps">d</Emphasis> -lactonohydrolase cDNA from <Emphasis Type="Italic">Fusarium moniliforme</Emphasis> in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A d -lactonohydrolase gene of about 1.1 kb was cloned from Fusarium moniliforme. The ORF sequence predicted a protein of 382 amino acids with a molecular mass of about 40 kDa. An expression plasmid carrying the gene under the control of the triose phosphate isomerase gene promotor was introduced into Saccharomyces cerevisiae, and the d -lactonohydrolase gene was successfully expressed in the recombinant strains.Revisions requested 10 September 2004; Revisions received 15 October 2004The nucleotide sequence data reported in this paper has been assigned accession number AY728018 in the GeneBank database.     

Cloning,expression and characterization of a lipase gene (<Emphasis Type="Italic">lip3</Emphasis>) from<Emphasis Type="Italic"> Pseudomonas aeruginosa</Emphasis> LST-03

A lipase gene (lip3) was cloned from the Pseudomonas aeruginosa strain LST-03 (which tolerates organic solvents) and expressed in Escherichia coli. The cloned sequence includes an ORF consisting of 945 nucleotides, encoding a protein of 315 amino acids (Lip3 lipase, 34.8 kDa). The predicted Lip3 lipase belongs to the class of serine hydrolases; the catalytic triad consists of the residues Ser-137, Asp-258, and His-286. The gene cloned in the present study does not encode the LST-03 lipase, a previously isolated solvent-stable lipase secreted by P. aeruginosa LST-03, because the N-terminal amino acid sequence of the Lip3 lipase differs from that of the LST-03 lipase. Although the effects of pH on the activity and stability of the Lip3 lipase, and the temperature optimum of the enzyme, were similar to those of the LST-03 lipase, the relative activity of the Lip3 lipase at lower temperatures (0–35°C) was higher than that of the LST-03 lipase. In the absence of organic solvents, the half-life of the Lip3 lipase was similar to that of the LST-03 lipase. However, in the presence of most of the organic solvents tested in this study (the exceptions were ethylene glycol and glycerol), the stability of the Lip3 lipase was lower than that of the LST-03 lipase.Communicated by H. Ikeda     

Molecular cloning,functional characterization and expression analysis of a novel monosaccharide transporter gene <Emphasis Type="Italic">OsMST6</Emphasis> from rice (<Emphasis Type="Italic">Oryza sativa</Emphasis> L.)

Monosaccharides transporters play important roles in assimilate supply for sink tissue development. In this study, a new monosaccharide transporter gene OsMST6 was identified from rice (Oryza sativa L.). The predicted OsMST6 protein shows typical features of sugar transporters and shares 79.6% identity with the rice monosaccharide transporter OsMST3. Heterologous expression in yeast (Saccharomyces cerevisiae) demonstrated that OsMST6 is a broad-spectrum monosaccharide transporter, with a K (m) of 266.1 muMu for glucose. OsMST6-green fluorescent protein fusion protein is localized to the plasma membrane in plant. Semi-quantitative RT-PCR analysis exhibited that OsMST6 is expressed in all tested organs/tissues. In developing seeds, OsMST6 expression level is high at the early and middle grain filling stages and gradually declines later. Further analysis detected its expression in both maternal and filial tissues. RNA in situ hybridization analysis indicated that OsMST6 is predominantly expressed in the vascular parenchyma of the chalazal vein, cross-cells, nucellar tissue and endosperm of young seeds, in mesophyll cells of source leaf blades, and in pollens and the connective vein of anthers. In addition, OsMST6 expression is up-regulated by salt stress and sugars. The physiological role of OsMST6 for seed development and its roles in other sink and source tissues are discussed.     

Cloning,characterization and expression of the extracellular lipase gene from <Emphasis Type="Italic">Aureobasidium </Emphasis><Emphasis Type="Italic">pullulans</Emphasis> HN2-3 isolated from sea saltern

The extracellular lipase structural gene was isolated from cDNA of Aureobasidium pullulans HN2-3 by using SMART^TM RACE cDNA amplification kit. The gene had an open reading frame of 1245 bp long encoding a lipase. The coding region of the gene was interrupted by only one intron (55 bp). It encodes 414 amino acid residues of a protein with a putative signal peptide of 26 amino acids. The protein sequence deduced from the extracellular lipase structural gene contained the lipase consensus sequence (G-X-S-X-G) and three conserved putative N-glycosylation sites. According to the phylogenetic tree of the lipases, the lipase from A. pullulans was closely related to that from Aspergillus fumigatus (XP_750543) and Neosartorya fischeri (XP_001257768) and the identities were 50% and 52%, respectively. The mature peptide encoding cDNA was subcloned into pET-24a (+) expression vector. The recombinant plasmid was expressed in Escherichia coli BL21(DE3). The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 47 kDa was found. Enzyme activity assay verified the recombinant protein as a lipase. A maximum activity of 0.96 U/mg was obtained from cellular extract of E. coli BL21(DE3) harboring pET-24a(+)LIP1. Optimal pH and temperature of the crude recombinant lipase were 8.0 and 35 °C, respectively and the crude recombinant lipase had the highest hydrolytic activity towards peanut oil.     

Isolation and characterization of the <Emphasis Type="Italic">Larix gmelinii </Emphasis><Emphasis Type="Italic">ANGUSTIFOLIA</Emphasis> (<Emphasis Type="Italic">LgAN</Emphasis>) gene

ANGUSTIFOLIA (AN), a plant homolog of C-terminal binding protein, controls the polar elongation of leaf cells and the trichome-branching pattern in Arabidopsis thaliana. In the present study, degenerate PCR was used to isolate an ortholog of AN, referred to as LgAN, from larch (Larix gmelinii). The LgAN cDNA is predicted to encode a protein of 646 amino acids that shows striking sequence similarity to AN proteins from other plants. The predicted amino acid sequence has a conserved NAD-dependent 2-hydroxy acid dehydrogenase (D2-HDH) motif and a plant AN-specific LxCxE/D motif at its N-terminus, as well as a plant-specific long C-terminal region. The LgAN gene is a single-copy gene that is expressed in all larch tissues. Expression of the LgAN cDNA rescued the leaf width and trichome-branching pattern defects in the angustifolia-1 (an-1) mutant of Arabidopsis, showing that the LgAN gene has effects complementary to those of AN. These results suggest that the LgAN gene has the same function as the AN gene.     

Cloning and expression of <Emphasis Type="Italic">mel</Emphasis> gene from <Emphasis Type="Italic">Bacillus thuringiensis</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Previous work from our laboratory has shown that most of Bacillus thuringiensis strains possess the ability to produce melanin in the presence of l-tyrosine at elevated temperatures (42 °C). Furthermore, it was shown that the melanin produced by B. thuringiensis was synthesized by the action of tyrosinase, which catalyzed the conversion of l-tyrosine, via l-DOPA, to melanin. In this study, the tyrosinase-encoding gene (mel) from B. thuringiensis 4D11 was cloned using PCR techniques and expressed in Escherichia coli DH5 . A DNA fragment with 1179 bp which contained the intact mel gene in the recombinant plasmid pGEM1179 imparted the ability to synthesize melanin to the E. coli recipient strain. The nucleotide sequence of this DNA fragment revealed an open reading frame of 744 bp, encoding a protein of 248 amino acids. The novel mel gene from B.thuringiensis expressed in E. coli DH5 conferred UV protection on the recipient strain.     

Cloning and characterization of the inulinase gene from a marine yeast <Emphasis Type="Italic">Pichia guilliermondii</Emphasis> and its expression in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

The extracellular inulinase structural gene was isolated from the genomic DNA of the marine yeast Pichia guilliermondii strain 1 by PCR. The gene had an open reading frame of 1,542 bp long encoding an inulinase. The coding region of the gene was not interrupted by any intron. It encoded 514 amino acid residues of a protein with a putative signal peptide of 18 amino acids and the calculated molecular mass of 58.04 kDa. The protein sequence deduced from the inulinase structural gene contained the inulinase consensus sequences (WMNXPNGL) and (RDPKVF). It also had ten conserved putative N-glycosylation sites. The inulinase from P. guilliermondii strain 1 was found to be closely related to that from Kluyveromyces marxianus. The inulinase gene without the signal sequence was subcloned into pPICZαA expression vector and expressed in Pichia pastoris X-33. The expressed fusion protein was analyzed by SDS-PAGE and western blotting and a specific band with molecular mass of about 60 kDa was found. Enzyme activity assay verified the recombinant protein as an inulinase. A maximum activity of 58.7 ± 0.12 U/ml was obtained from the culture supernatant of P. pastoris X-33 harboring the inulinase gene. A large amount of monosaccharides, disaccharides and oligosaccharides were detected after the hydrolysis of inulin with the crude recombinant inulinase.     

Molecular characterization the <Emphasis Type="Italic">YABBY</Emphasis> gene family in <Emphasis Type="Italic">Oryza sativa</Emphasis> and expression analysis of <Emphasis Type="Italic">OsYABBY1</Emphasis>

Members of the YABBY gene family have a general role that promotes abaxial cell fate in a model eudicot, Arabidopsis thaliana. To understand the function of YABBY genes in monocots, we have isolated all YABBY genes in Oryza sativa (rice), and revealed the spatial and temporal expression pattern of one of these genes, OsYABBY1. In rice, eight YABBY genes constitute a small gene family and are classified into four groups according to sequence similarity, exon-intron structure, and organ-specific expression patterns. OsYABBY1 shows unique spatial expression patterns that have not previously been reported for other YABBY genes, so far. OsYABBY1 is expressed in putative precursor cells of both the mestome sheath in the large vascular bundle and the abaxial sclerenchyma in the leaves. In the flower, OsYABBY1 is specifically expressed in the palea and lemma from their inception, and is confined to several cell layers of these organs in the later developmental stages. The OsYABBY1-expressing domains are closely associated with cells that subsequently differentiate into sclerenchymatous cells. These findings suggest that the function of OsYABBY1 is involved in regulating the differentiation of a few specific cell types and is unrelated to polar regulation of lateral organ development.     

Mutational analysis of the <Emphasis Type="Italic">gum</Emphasis> gene cluster required for xanthan biosynthesis in <Emphasis Type="Italic">Xanthomonas</Emphasis><Emphasis Type="Italic">oryzae</Emphasis> pv <Emphasis Type="Italic">oryzae</Emphasis>

Genome sequence analysis of Xanthomonas oryzae pv. oryzae has revealed a cluster of 12 ORFs that are closely related to the gum gene cluster of Xanthomonas campestris pv. campestris. The gum gene cluster of X. oryzae encodes proteins involved in xanthan production; however, there is little experimental evidence supporting this. In this study, biochemical analyses of xanthan produced by a defined set of X. oryzae gum mutant strains allowed us to preliminarily assign functions to most of the gum gene products: biosynthesis of the pentasaccharide repeating unit for GumD, GumM, GumH, GumK, and GumI, xanthan polymerization and transport for GumB, GumC, GumE, and GumJ, and modification of the pentasaccharide repeating unit for GumF, GumG, and GumL. In addition, we found that the exopolysaccharides are essential but not specific for the virulence of X. oryzae. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. Sang-Yoon Kim and Jeong-Gu Kim contributed equally to this work.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Molecular characterization of the sheep <Emphasis Type="Italic">CIB1</Emphasis> gene

The calcium and integrin binding protein 1(CIB1), is an EF-hand-containing protein that binds many effector proteins including the platelet αIIbβ3 integrin and potentially regulates their functions. Here we report the cloning and characterization of the sheep CIB1 gene. The CIB1 cDNA is 885-bp in size, containing a 45-bp of 5′ untranslated region (UTR), a 264-bp long 3′-UTR and a 576-bp open reading frame that encodes 191 amino acids. The sheep CIB1 cDNA shows 98.3, 92.0, 91.8, 91.3, 90.5 and 90.1% of similarity, at the nucleotide level, to its equivalents in cattle, pigs, rhesus monkey, humans, rats and mice, respectively at the deduced protein level, the corresponding values are more than 94%. The sheep CIB1 gene consisted of seven exons. Quantitative PCR (Q-PCR) showed that CIB1 was widely expressed in different tissues with the highest level in the testis, suggesting that it may play a role in ram fertility. We cloned the sheep CIB2, CIB3 and CIB4 genes and detected their expression patterns in different tissues.     

Expression and functional analysis of <Emphasis Type="Italic">ZmDWF4</Emphasis>, an ortholog of <Emphasis Type="Italic">Arabidopsis DWF4</Emphasis> from maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.)

DWF4 encodes a rate-limiting mono-oxygenase that mediates 22α-hydroxylation reactions in the BR biosynthetic pathway and it is the target gene in the BR feedback loop. Knockout of DWF4 results in a dwarfed phenotype and other severe defects in Arabidopsis. Here we report on the isolation of the ZmDWF4 gene in maize. Sequence analysis revealed that the open reading frame of ZmDWF4 was 1,518 bp, which encodes a protein composed of 505 amino acid residues with a calculated molecular mass of 57.6 kD and a predicated isoelectric point (pI) of 9.54. Phylogenetic analysis indicated that ZmDWF4 was very close to the Arabidopsis DWF4. In young maize seedlings, the expression of ZmDWF4 in shoots was much higher than that in roots. The highest expression of ZmDWF4 was observed in husk leaves and the lowest in silks during flowering stage. The expression of ZmDWF4 in maize was significantly down regulated by exogenous brassinolide. A heterogeneous complementary experiment demonstrated that the defects of three Arabidopsis DWF4 mutants could be rescued by constitutive expression of ZmDWF4, with leaf expandability, inflorescence stem heights and fertile capabilities all restored to normal levels. Increases in seed and branch number as well as the height of florescence stem were observed in the over-expressed transformants. These findings suggest that ZmDWF4 may be an ortholog gene of Arabidopsis DWF4 and responsible for BR biosynthesis in maize. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular cloning,sequence analysis,expression and characterization of the endochitinase gene from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21

The endochitinase DNA and cDNA from Trichoderma sp. were cloned, sequenced and expressed. The cloned DNA and cDNA sequences were 1,476 and 1,275 bp in length, respectively. There were three introns in DNA sequence in comparison with the cDNA sequence. The endochitinase protein contained three regions: the signal peptide, the prepro-region and the mature protein region. The gene fragment encoding the mature endochitinase was ligated into the expression vector pET-28a+, yielding pET-1. The plasmid pET-1 was transformed into the Escherichia coli BL21 (DE3). The clone bearing pET-1 was picked and cultured at 30°C for the expression of endochitinase. SDS-PAGE analysis showed that the endochitinase was expressed in the periplasmic space and the purified protein showed a single band. The activity of 70.2 U/mg was obtained from the cellular extract of the recombinant strain. The activity of endochitinase was 2.5-fold higher at 24 h than at 16 h in the periplasmic space. The optimal pH and temperature of the recombinant endochitinase were determined to be 7.0 and 35°C, respectively. It was relatively stable within the pH range of 5–8. Significant activity stimulation by 1 mM Mg²⁺ and 5 mM Fe²⁺ and inhibition by 5 mM Co²⁺ and 5 mM Hg²⁺ were observed. The kinetic constants K_m, V_max and K_cat for the hydrolysis of the colloidal chitin were 1.5 mM, 1.37 μmol min⁻¹ and 6.23 min⁻¹, respectively.