Spore dipicolinic acid contents used for estimating the number of endospores in sediments

Endospores are heat-resistant bacterial resting stages that can remain viable for long periods of time and may thus accumulate in sediments as a function of sediment age. The number of spores in sediments has only rarely been quantified, because of methodological problems, and consequently little is known about the quantitative contribution of endospores to the total number of prokaryotic cells. We here report on a protocol to determine the number of endospores in sediments and cultures. The method is based on the fluorimetric determination of dipicolinic acid (DPA), a spore core-specific compound, after reaction with terbium chloride. The concentration of DPA in natural samples is converted into endospore numbers using endospore-forming pure cultures as standards. Quenching of the fluorescence by sediment constituents and background fluorescence due to humic substances hampered direct determination of DPA in sediments. To overcome those interferences, DPA was extracted using ethyl acetate prior to fluorimetric measurements of DPA concentrations. The first results indicated that endospore numbers obtained with this method are orders of magnitude higher than numbers obtained by cultivation after pasteurization. In one of the explored sediment cores, endospores accounted for 3% of all stainable prokaryotic cells.     

On the isolation of dipicolinic acid from endospores of Sarcina ureae

Summary The isolation of an ultraviolet absorbing material from spores of Sarcina ureae and its identification as dipicolinic acid (DPA) is described. The DPA was present in amounts ranging from 4–7% of the spore dry weight, but was not detected in vegetative cells.The contention that the spores of Sarcina ureae are unusual or atypical, and that the organism is a morphologically aberrant Bacillus species is discussed and found wanting.     

A highly sensitive HPLC method for determination of nanomolar concentrations of dipicolinic acid, a characteristic constituent of bacterial endospores

A high-performance liquid chromatographic method with indirect fluorescence detection has been developed for quantification of dipicolinic acid, a major constituent of bacterial endospores. After separation on a reversed-phase column, a post-column reagent of sodium acetate at 1 mol l(-1) with 50 micromol l(-1) terbium chloride was added for complexation of dipicolinic acid. Terbium monodipicolinate complexes formed were quantified by measuring the fluorescence emission maximum at 548 nm after excitation with UV light at 270 nm wavelength. Parameters of post-column complexation were optimized to achieve a detection limit of 0.5 nmol DPA l(-1), corresponding to about 10(3) Desulfosporosinus orientis endospores per ml. The method was applied to the analysis of spore contamination in tuna and for estimating the endospore numbers in marine sediments.     

Determination of dipicolinic acid in bacterial spores by derivative spectroscopy

Dipicolinic acid was extracted from approximately 0.1 mg spores or 0.5 ml of sporulating culture with 20 mM HCl for 10 min at 100 degrees C. The suspension was diluted with 5 mM Ca2+, 100 mM Tris, pH 7.6, centrifuged, and the first derivative of the uv absorbance spectrum recorded from 275 nm to 285 nm. DPA concentration was determined from the difference between the maximum at 276.6 nm and the minimum at 280 nm. The use of the difference between two first derivative values removed possible interference from sloping baselines. Turbidity, nucleic acids, and bacteriological media did not interfere. Analysis time for four extracts was 4 min using a spectrophotometer reading at 0.1-nm intervals. Dipicolinate at 0.1 mM gave 0.184 absorbance/nm at 25 degrees C. The coefficient of variation was 1.5%, and the detection limit 1 microM.     

Ureolytic and nitrifying bacterial heterotrophs from acid soils

Nitrification following ureolysis in soil samples from tea growing soils (pH 4.5–5.5) was found to be chiefly due to the activity of heterotrophic bacteria belonging to generaBacillus, Arthrobacter, Sporosarcina, Micrococcus, Clostridium, Pseudomonas andProteus. A correlation between the intensity of ureolytic activity of organisms in a given soil sample and the yield levels of tea was observed. In culture media the increase in the quantity of NH ₄ ⁺ -N indicating ureolysis was not accompanied by proportional increase in biomass. Ureolysis and nitrification in sterile soil sample inoculated with the isolates improved through amendment of organic carbon to the soil.     

Recovery and quantification of bacterial cells associated with streambed sediments

Efficient detachment and purification of bacterial cells associated with streambed sediments are required in order to quantify cell abundance and to assess community composition through the application of epifluorescence microscopy techniques. We applied chemical (i.e., sodium pyrophosphate and polysorbate) and physical treatments (i.e., shaking and sonication), followed by Nycodenz density gradient centrifugation to efficiently recover benthic bacteria. This procedure resulted in a highly purified cell suspension allowing for a precise cell quantification through the application of fluorescent dyes. About 93% of total cells were recovered from the original sediment, with higher recovery from the finer grain-size class (90%) in comparison to the coarse fraction (69%). The potential damaging effects of the applied procedures on cell integrity were assessed on planktonic bacteria in a pre-filtered water control. As a consequence of the high purity of the extracted bacteria, flow cytometry was successfully applied as counting method for sediment cell suspension. However, a significant decrease of protein synthesis in purified samples was measured by estimating the (3)H-Leucine incorporation rates, rising uncertainties on the possibility to apply potential metabolic assays after Nycodenz purification.     

Nitrogen fluxes from marine sediments: quantification of the associated co-occurring bacterial processes

Different models for calculate on of di-nitrogen fluxes using ¹⁵NO₃ tracers were tested for their congruence with experimental data obtained with marine sediment samples. The co-occurence of nitrification as source of substrate and the simultaneous N₂ production from denitrification and/or Anammox were taken into account as well as nitrous oxide production in the total denitrification rate. The results highlighted that isotope technique provides a powerful tool to evaluate, in the same experimental set up, the rates of total N₂ fluxes: denitrification and/or Anammox if it is carefully applied and its limitations, mainly the range of ¹⁵NO₃ inputs are adapted to the studied samples and the linearity of the kinetics of the products checked.     

Determination of the gram-positive bacterial content of soils and sediments by analysis of teichoic acid components

Many gram-positive bacteria form substituted polymers of glycerol and ribitol phosphate esters known as teichoic acids. Utilizing the relative specificity of cold concentrated hydroflouric acid in the hydrolysis of polyphosphate esters it proved possible to quantitatively assay the teichoic acid-derived glycerol and ribitol from gram-positive bacteria added to various soils and sediments. The lipids are first removed from the soils or sediments with a one phase chloroform-methanol extraction and the lipid extracted residue is hydrolyzed with cold concentrated hydrofluoric acid. To achieve maximum recovery of the teichoic acid ribitol, a second acid hydrolysis of the aqueous extract is required. The glycerol and ribitol are then acetylated after neutralization and analyzed by capillary gas-liquid chromatography. This technique together with measures of the total phospholipid, the phospholipid fatty acid, the muramic acid and the hydroxy fatty acids of the lipopolysaccharide lipid A of the gram-negative bacteria makes it possible to describe the community structure of environmental samples. The proportion of gram-positive bacteria measured as the teichoic acid glycerol and ribitol is higher in soils than in sediments and increases with depth in both.     

Assessment of heat resistance of bacterial spores from food product isolates by fluorescence monitoring of dipicolinic acid release

This study is aimed at the development and application of a convenient and rapid optical assay to monitor the wet-heat resistance of bacterial endospores occurring in food samples. We tested the feasibility of measuring the release of the abundant spore component dipicolinic acid (DPA) as a probe for heat inactivation. Spores were isolated from the laboratory type strain Bacillus subtilis 168 and from two food product isolates, Bacillus subtilis A163 and Bacillus sporothermodurans IC4. Spores from the lab strain appeared much less heat resistant than those from the two food product isolates. The decimal reduction times (D values) for spores from strains 168, A163, and IC4 recovered on Trypticase soy agar were 1.4, 0.7, and 0.3 min at 105 degrees C, 120 degrees C, and 131 degrees C, respectively. The estimated Z values were 6.3 degrees C, 6.1 degrees C, and 9.7 degrees C, respectively. The extent of DPA release from the three spore crops was monitored as a function of incubation time and temperature. DPA concentrations were determined by measuring the emission at 545 nm of the fluorescent terbium-DPA complex in a microtiter plate fluorometer. We defined spore heat resistance as the critical DPA release temperature (Tc), the temperature at which half the DPA content has been released within a fixed incubation time. We found Tc values for spores from Bacillus strains 168, A163, and IC4 of 108 degrees C, 121 degrees C, and 131 degrees C, respectively. On the basis of these observations, we developed a quantitative model that describes the time and temperature dependence of the experimentally determined extent of DPA release and spore inactivation. The model predicts a DPA release rate profile for each inactivated spore. In addition, it uncovers remarkable differences in the values for the temperature dependence parameters for the rate of spore inactivation, DPA release duration, and DPA release delay.     

Recovery of DNA from soils and sediments

Experiments were performed to evaluate the effectiveness of two different methodological approaches for recovering DNA from soil and sediment bacterial communities: cell extraction followed by lysis and DNA recovery (cell extraction method) versus direct cell lysis and alkaline extraction to recover DNA (direct lysis method). Efficiency of DNA recovery by each method was determined by spectrophotometric absorbance and using a tritiated thymidine tracer. With both procedures, the use of polyvinylpolypyrrolidone was important for the removal of humic compounds to improve the purity of the recovered DNA; without extensive purification, various restriction enzymes failed to cut added target DNA. Milligram quantities of high-purity DNA were recovered from 100-g samples of both soils and sediments by the direct lysis method, which was a greater than 1-order-of-magnitude-higher yield than by the cell extraction method. The ratio of labeled thymidine to total DNA, however, was higher in the DNA recovered by the cell extraction method. than by the direct lysis method, suggesting that the DNA recovered by the cell extraction method came primarily from active bacterial cells, whereas that recovered by the direct lysis method may have contained DNA from other sources.     

Terminal restriction fragment length polymorphism monitoring of genes amplified directly from bacterial communities in soils and sediments

Terminal Restriction Fragment Length Polymorphism (T-RFLP) or Fluorescent Polymerase Chain Reaction/Restriction Fragment Length Polymorphism (FluRFLP) have made a significant impact on the way in which PCR products amplified from mixed community DNA extracts have been assessed. Technically, these approaches are essentially the same. PCR products are generated that contain at one 5′ end label, typically a fluorescent moiety, that will be detected by a DNA sequencing machine. Upon digestion using a specific restriction endonuclease, labeled and unlabeled fragments are generated. This restriction endonuclease is chosen such that following this digestion, each labeled fragment corresponds to a different sequence variant. During electrophoretic separation, the DNA sequencing machine detects only these labeled fragments and therefore detects only the sequence variants. The aim of this article is to describe the protocois and demonstrate that this profiling can be performed using different DNA sequencing machines. The analysis and applications of this approach are also discussed.