Elongation of repetitive DNA by DNA polymerase from a hyperthermophilic bacterium Thermus thermophilus

Short repetitive DNA sequences are believed to be one of the primordial genetic elements that served as a source of complex large DNA found in the genome of modern organisms. However, the mechanism of its expansion (increase in repeat number) during the course of evolution is unclear. We demonstrate that the DNA polymerase of the hyperthermophilic bacterium Thermus thermophilus can elongate oligoDNA with several tandem repeats to very long DNA in vitro. For instance, 48mer repetitive oligoDNA (TACATGTA)₆, which has 25% GC content and a palindromic sequence, can be elongated up to ~10 000 bases by DNA polymerase at 74°C without template DNA. OligoDNA having a different GC content or a quasi-palindromic sequence can also be elongated, but less efficiently. A spectroscopic thermal melting experiment with the oligoDNA showed that its hairpin–coil transition temperature was very close to the elongation reaction temperature (74°C), but was much higher than the temperature at which duplex oligoDNA can exist stably. Taken together, we conclude that repetitive oligoDNA with a palindromic or quasi-palindromic sequence is elongated extensively by a hyperthermophilic DNA polymerase through hairpin–coil transitions. We propose that such an elongation mechanism might have been a driving force to expand primordial short DNA.     

Elongation of palindromic repetitive DNA by DNA polymerase from hyperthermophilic archaea: a mechanism of DNA elongation and diversification

DNA polymerase from hyperthermophilic bacteria can elongate tandem repetitive oligoDNA with a complete or incomplete palindromic sequence under isothermal conditions by "hairpin elongation". However, the product of the reaction has not yet been sufficiently characterized. Here, I demonstrate that when palindromic repetitive oligoDNA, e.g., (5'AGATATCT3')(6), was added as a "seed" to the DNA synthesis reaction catalyzed by DNA polymerase from the archaea Thermococcus litoralis (Vent polymerase) at 74 degrees C, the product was (5'AGATATCT3')(n). The product itself was palindromic and repetitive, and its motif (unit) sequence was exactly the same as that of the seed oligoDNA. On the other hand, when a pseudopalindrome, which contains a palindrome-breaking nucleotide (underlined), was present in seed oligoDNA, e.g., (5'GATTC3')(6), the product was (5'GATATC3')(n), which had a different motif sequence from that of the seed oligoDNA. When a pseudopalindrome (5'AGATATCA3')(6) was added to the reaction, the products were 5'TATCA . (AGATATCA)(3) . AGATATCT . (TGATATCT)(5) . TGATA3', etc. When 5'AGATATCA . (AGATATCT3')(5) was added, products were 5'TATCT . (AGATATCT)(2).TGATATCT . AGATATCT . AGATATCA . AGATATCT . AGA3', etc., demonstrating the generation of many "mutations" in the product DNA. I conclude that a tandem repetitive sequence is faithfully elongated (amplified) by hyperthermophilic DNA polymerase if it is completely palindromic, but is elongated with many errors if it is incompletely palindromic (pseudopalindromic) or mixed with a pseudopalindrome. The results suggest a protein-catalyzed elongation/diversification mechanism of short repetitive DNAs on the early earth.     

Initiation of DNA replication by DNA polymerases from primers forming a triple helix

Despite extensive studies on oligonucleotide-forming triple helices, which were discovered in 1957, their possible relevance in the initiation of DNA replication remains unknown. Using sequences forming triple helices, we have developed a DNA polymerisation assay by using hairpin DNA templates with a 3′ dideoxynucleotide end and an unpaired 5′-end extension to be replicated. The T7 DNA polymerase successfully elongated nucleotides to the expected size of the template from the primers forming triple helices composed of 9–14 deoxyguanosine-rich residues. The triple helix-forming primer required for this reaction has to be oriented parallel to the homologous sequence of the hairpin DNA template. Substitution of the deoxyguanosine residues by N7 deazadeoxyguanosines in the hairpin of the template prevented primer elongation, suggesting that the formation of a triple helix is a prerequisite for primer elongation. Furthermore, DNA sequencing could be achieved with the hairpin template through partial elongation of the third DNA strand forming primer. The T4 DNA polymerase and the Klenow fragment of DNA polymerase I provided similar DNA elongation to the T7 polymerase–thioredoxin complex. On the basis of published crystallographic data, we show that the third DNA strand primer fits within the catalytic centre of the T7 DNA polymerase, thus underlying this new property of several DNA polymerases which may be relevant to genome rearrangements and to the evolution of the genetic apparatus, namely the DNA structure and replication processes.     

Capillary electrophoresis is a sensitive monitor of the hairpin-random coil transition in DNA oligomers

Capillary electrophoresis (CE) has been used to characterize the hairpin-random coil transition of four octamers in the GCxxxxGC minihairpin family, where xxxx is GAAA, TTTC, TTTT, or AAAA. The transition can be monitored by CE because differences in the frictional coefficients of the hairpin and coil forms of each octamer lead to a difference of approximately 9% in the free solution mobilities of the two conformations. The GAAA octamer is unusually stable, with a melting temperature of 65 degrees C. The TTTT octamer forms a minihairpin with a melting temperature of 29 degrees C, the TTTC octamer has a melting temperature of 16 degrees C, and the AAAA octamer has a melting temperature below 0 degrees C. The thermal transitions of the TTTT, TTTC, and AAAA octamers are well fitted by a structure prediction algorithm; however, the GAAA minihairpin is considerably more stable than predicted. The melting temperature of the GAAA minihairpin is reduced to 47 degrees C in aqueous buffers containing 7.2M urea and to 33 degrees C in buffers containing 7.2M urea plus 40% (v/v) formamide. The combined results indicate that CE is a sensitive technique for monitoring conformational transitions in small DNA molecules.     

Base stacking and even/odd behavior of hairpin loops in DNA triplet repeat slippage and expansion with DNA polymerase

Repetitions of CAG or CTG triplets in DNA can form intrastrand hairpin loops with combinations of normal and mismatched base pairs that easily rearrange. Such loops may promote primer-template slippage in DNA replication or repair to give triplet-repeat expansions like those associated with neurodegenerative diseases. Using self-priming sequences (e.g. (CAG)(16)(CTG)(4)), we resolve all hairpin loops formed and measure their slippage and expansion rates with DNA polymerase at 37 degrees C. Comparing CAG/CTG loop structures with GAC/GTC structures, having similar hydrogen bonding but different base stacking, we find that CAG, CTG, and GTC triplets predominantly form even-membered loops that slip in steps of two triplets, whereas GAC triplets favor odd-numbered loops. Slippage rates decline as hairpin stability increases, supporting the idea that slippage initiates more easily in less stable regions. Loop stabilities (in low salt) increase in the order GTC < CAG < GAC < CTG, while slippage rates decrease in the order GTC > CAG approximately GAC > CTG. Loops of GTC compared with CTG melt 9 degrees C lower and slip 6-fold faster. We interpret results in terms of base stacking, by relating melting temperature to standard enthalpy changes for doublets of base pairs and mispairs, considering enthalpy-entropy compensation.     

DNA primase. Processivity and the primase to polymerase alpha activity switch

Calf thymus DNA primase was examined to determine the kinetic parameters that define its unusual processivity. At 37 degrees C, the major products were 8-9 and 2-3 nucleotides long. The 2-mer was the predominant product when considered on a molar basis. At each polymerization cycle en route to synthesis of a unit length primer (7-10 nucleotides), processivity was defined by competition of enzyme dissociation with ATP binding as well as an ATP independent step(s). Reducing the temperature to 25 degrees C had relatively little effect on the production of primers less than or equal to 6 nucleotides long, but greatly enhanced production of primers twice (16-18 nucleotides) the normal unit length. Kinetic analysis revealed that synthesis of these longer primers largely involves dissociation of the primase after completion of the unit length primer. After synthesis of a primer, the primase-polymerase complex normally switches to polymerase activity. Only primers greater than or equal to 7 nucleotides long were utilized by the polymerase regardless of the dNTP concentration, indicating that the signal for the primase to polymerase activity switch is primer completion. During the switch, either the primer-template does not dissociate from the complex or the complex has extraordinarily high affinity for the primers. At 25 degrees C and physiological dNTP concentrations the activity switch is very efficient, greater than 90% of the primers are elongated. However, at 37 degrees C the switch is much less efficient, likely due to primer-template denaturation.     

Thermodynamic stability of the 5' dangling-ended DNA hairpins formed from sequences 5'-(XY)2GGATAC(T)4GTATCC-3', where X, Y = A, T, G, C

Expressions for the partition function Q (T) of DNA hairpins are presented. Calculations of Q (T), in conjunction with our previously reported numerically exact algorithm [T. M. Paner, M. Amaratunga, M. J. Doktycz, and A. S. Benight (1990) Biopolymers, 29, 1715-1734], yield a numerical method to evaluate the temperature dependence of the transition enthalpy, entropy, and free energy of a DNA hairpin directly from its optical melting curve. No prior assumptions that the short hairpins melt in a two-state manner are required. This method is then applied in a systematic manner to investigate the stability of the six basepair duplex stem 5'-GGATAC-3' having four-base dangling single-strand ends with the sequences (XY)2, where X, Y = A, T, G, C, on the 5' end and a T4 loop on the 3' end. Results show that all dangling ends of the sample set stabilize the hairpin against melting. Increases in transition temperatures as great as 4.0 degrees C above the blunt-ended control hairpin were observed. The hierarchy of the hairpin transition temperatures is dictated by the identity of the first base of the dangling end adjoining the duplex in the order: purine greater than T greater than C. Calculated melting curves of every hairpin were fit to experimental curves by adjustment of a single parameter in the numerically exact theoretical algorithm. Exact fits were obtained in all cases. Experimental melting curves were also calculated assuming a two-state melting process. Equally accurate fits of all dangling-ended hairpin melting curves were obtained with the two-state model calculation. This was not the case for the melting curve of the blunt-ended hairpin, indicating the presence of a four-base dangling-end drives hairpin melting to a two-state process. Q (T) was calculated as a function of temperature for each hairpin using the theoretical parameters that provided calculated curves in exact agreement with the experimentally obtained optical melting curves. From Q (T), the temperature dependence of the transition enthalpy delta H, entropy delta S, and free energy delta G were calculated for every hairpin providing a quantitative assessment of the effects of dangling ends on hairpin thermodynamics. Comparisons of our results are made with those of the Breslauer group [M. Senior, R. A. Jones, and K. J. Breslauer (1988) Biochemistry 27, 3879-3885] on the T2 5' dangling-ended d(GC)3 duplexes.(ABSTRACT TRUNCATED AT 400 WORDS)     

Electrical detection of the temperature induced melting transition of a DNA hairpin covalently attached to gold interdigitated microelectrodes

The temperature induced melting transition of a self-complementary DNA strand covalently attached at the 5′ end to the surface of a gold interdigitated microelectrode (GIME) was monitored in a novel, label-free, manner. The structural state of the hairpin was assessed by measuring four different electronic properties of the GIME (capacitance, impedance, dissipation factor and phase angle) as a function of temperature from 25°C to 80°C. Consistent changes in all four electronic properties of the GIME were observed over this temperature range, and attributed to the transition of the attached single-stranded DNA (ssDNA) from an intramolecular, folded hairpin structure to a melted ssDNA. The melting curve of the self-complementary single strand was also measured in solution using differential scanning calorimetry (DSC) and UV absorbance spectroscopy. Temperature dependent electronic measurements on the surface and absorbance versus temperature values measured in solution experiments were analyzed assuming a two-state process. The model analysis provided estimates of the thermodynamic transition parameters of the hairpin on the surface. Two-state analyses of optical melting data and DSC measurements provided evaluations of the thermodynamic transition parameters of the hairpin in solution. Comparison of surface and solution measurements provided quantitative evaluation of the effect of the surface on the thermodynamics of the melting transition of the DNA hairpin.     

DNA footprinting studies of the complex formed by the T4 DNA polymerase holoenzyme at a primer-template junction

We have used DNA footprinting techniques to analyze the interactions of five DNA replication proteins at a primer-template junction: the bacteriophage T4 DNA polymerase (the gene 43 protein), its three accessory proteins (the gene 44/62 and 45 proteins), and the gene 32 protein, which is the T4 helix-destabilizing (or single-stranded DNA-binding) protein. The 177-nucleotide-long DNA substrate consisted of a perfect 52-base pair hairpin helix with a protruding single-stranded 5' tail. As expected, the DNA polymerase binds near the 3' end of this molecule (at the primer-template junction) and protects the adjacent double-stranded region from cleavage. When the gene 32 protein binds to the single-stranded tail, it reduces the concentration of the DNA polymerase required to observe the polymerase footprint by 10-30-fold. Periodic ATP hydrolysis by the 44/62 protein is required to maintain the activity of the DNA polymerase holoenzyme (a complex of the 43, 44/62, and 45 proteins). Footprinting experiments demonstrate the formation of a weak complex between the DNA polymerase and the gene 45 protein, but there is no effect of the 44/62 protein or ATP on this enlarged footprint. We propose a model for holoenzyme function in which the complex of the three accessory proteins uses ATP hydrolysis to keep a moving polymerase tightly bound to the growing 3' end, providing a "clock" to measure polymerase stalling.     

The T4 DNA polymerase accessory proteins form an ATP-dependent complex on a primer-template junction

The DNA polymerase holoenzyme of bacteriophage T4 contains, besides the DNA polymerase itself (the gene 43 protein), a complex of the protein products of T4 genes 44 and 62 (a DNA-dependent ATPase) and of gene 45. Together, the 44/62 and 45 proteins form an ATP-dependent "sliding clamp" that holds a moving DNA polymerase molecule at the 3' terminus of a growing DNA chain. We have used a unique DNA fragment that forms a short hairpin helix with a single-stranded 5' tail (a "primer-template junction") to map the binding sites for these polymerase accessory proteins by DNA footprinting techniques. In the absence of the DNA polymerase, the accessory proteins protect from DNase I cleavage 19-20 nucleotides just behind the 3' end of the primer strand and 27-28 nucleotides on the complementary portion of the template strand. Detection of this DNA-protein complex requires the 44/62 and 45 proteins plus the nonhydrolyzable ATP analogue adenosine 5'-O-(thiotriphosphate). The complex is not detected in the presence of ATP. We suggest that ATP hydrolysis by the 44/62 protein normally activates the accessory proteins at a primer-template junction, permitting the DNA polymerase to bind and thus form the complete holoenzyme. However, when the polymerase is missing, as in these experiments, ATP hydrolysis is instead followed by a release (or loosening) of the accessory protein complex.     

Deoxyribonucleic acid polymerases of BHK-21/C13 cells. Partial purification and characterization of the enzymes.

DNA polymerase from BHK-21/C13 cells were separated into two species, DNA polymerase I corresponding to the heterogeneous enzyme with sedimentation coefficient of 6-8S, and DNA polymerase II, corresponding to the enzyme with sedimentation coefficient of 3.3S. DNA polymerase I was purified 114-fold and DNA polymerase II 154-fold by a simple extraction procedure followed by column chromatography on phosphocellulose and gel filtration through Sephadex G-100. The purified enzymes differed markedly in respect of pH optimum, stimulation and inhibition by K+, Km for the deoxyribonucleoside 5'-triphosphates, stability to heating at 45 degrees C, and inhibition by N-ethylmaleimide. The preferred primer-template for both enzymes was "activated" DNA (DNA submitted to limited degradation by pancreatic deoxyribonuclease); native or thermally denatured DNA templates were relatively very poorly copied. When certain synthetic templates were tested, substantial differences were revealed between the two enzymes. Poly[d(A-T)] was poorly used by polymerase I but was superior to "activated" DNA for polymerase II. Poly[d(A)]-oligo[d(pT)10] was used efficiently by polymerase I but not by polymerase II. Poly(A)-oligo[d(pT)10] was not an effective primer-template although polymerase I could use it to a limited extent when Mn2+ replaced Mg2+ in the polymerase reaction and when the temperature of incubation was lowered from 37 degrees to 30 degrees C. When only one or two or three triphosphates were supplied in the reaction mixture, the activity of polymerase I was more severly diminished than that of polymerase II.     

Replication factors required for SV40 DNA replication in vitro. I. DNA structure-specific recognition of a primer-template junction by eukaryotic DNA polymerases and their accessory proteins.

Eukaryotic DNA polymerase delta and its accessory proteins are essential for SV40 DNA replication in vitro. A multi-subunit protein complex, replication factor C (RF-C), which is composed of subunits with apparent molecular weights of 140,000, 41,000, and 37,000, has primer/template binding and DNA-dependent ATPase activities. UV-cross-linking experiments demonstrated that the Mr = 140,000 subunit recognizes and binds to the primer-template DNA, whereas the Mr = 41,000 polypeptide binds ATP. Assembly of a replication complex at a primer-template junction has been studied in detail with synthetic, hairpin DNAs. Following glutaraldehyde fixation, a gel shift assay demonstrated that RF-C alone forms a weak binding complex with the hairpin DNA. Addition of ATP or its nonhydrolyzable analogue, ATP gamma S, increased specific binding to the DNA. Footprinting experiments revealed that RF-C recognizes the primer-template junction, covering 15 bases of the primer DNA from the 3'-end and 20 bases of the template DNA. Another replication factor, proliferating cell nuclear antigen (PCNA) binds to RF-C and the primer-template DNA forming a primer recognition complex and extends the protected region on the duplex DNA. This RF-C.PCNA complex has significant single-stranded DNA binding activity in addition to binding to a primer-template junction. However, addition of another replication factor, RF-A, completely blocked the nonspecific, single-stranded DNA binding by the RF-C.PCNA complex. RF-A therefore functions as a specificity factor for primer recognition. In the absence of RF-C, DNA polymerase delta (pol delta) and PCNA form a complex at the primer-template junction, protecting exactly the same site as the primer recognition complex. Addition of RF-C to this complex produced a higher order complex which is unstable unless its formation is coupled with translocation of pol delta. These results suggest that the sequential binding of RF-C, PCNA, and pol delta to a primer-template junction might directly account for the initiation of leading strand DNA synthesis at a replication origin. We demonstrate this directly in an accompanying paper (Tsurimoto, T., and Stillman, B. (1991) J. Biol. Chem. 266, 1961-1968).     

Optimization of the annealing temperature for DNA amplification in vitro.

In the polymerase chain reaction (PCR) technique, DNA is amplified in vitro by a series of polymerization cycles consisting of three temperature-dependent steps: DNA denaturation, primer-template annealing, and DNA synthesis by a thermostable DNA polymerase. The purity and yield of the reaction products depend on several parameters, one of which is the annealing temperature (Ta). At both sub- and super-optimal Ta values, non-specific products may be formed, and the yield of products is reduced. Optimizing the Ta is especially critical when long products are synthesized or when total genomic DNA is the substrate for PCR. In this article we experimentally determine the optimal annealing temperature (TaOPT) values for several primer-template pairs and develop a method for its calculation. The TaOPT is found to be a function of the melting temperatures of the less stable primer-template pair and of the product. The fact that experimental and calculated TaOPT values agree to within 0.7 degree C eliminates the need for determining TaOPT experimentally. Synthesis of DNA fragments shorter than 1 kb is more efficient if a variable Ta is used, such that the Ta is higher in each consecutive cycle.     

A magnesium-induced conformational transition in the loop of a DNA analog of the yeast tRNA(Phe) anticodon is dependent on RNA-like modifications of the bases of the stem.

Two single-stranded DNA heptadecamers corresponding to the yeast tRNA(Phe) anticodon stem-loop were synthesized, and the solution structures of the oligonucleotides, d(CCAGACTGAAGATCTGG) and d(CCAGACTGAAGAU-m5C-UGG), were investigated using spectroscopic methods. The second, or modified, base sequence differs from that of DNA by RNA-like modifications at three positions; dT residues were replaced at positions 13 and 15 with dU, and the dC at position 14 with d(m5C), corresponding to positions where these nucleosides occur in tRNA(Phe). Both oligonucleotides form intramolecular structures at pH 7 in the absence of Mg2+ and undergo monophasic thermal denaturation transitions (Tm = 47 degrees C). However, in the presence of 10 mM Mg2+, the modified DNa adopted a structure that exhibited a biphasic "melting" transition (Tm values of 23 and 52 degrees C) whereas the unmodified DNA structure exhibited a monophasic denaturation (Tm = 52 degrees C). The low-temperature, Mg(2+)-dependent structural transition of the modified DNA was also detected using circular dichroism (CD) spectroscopy. No such transition was exhibited by the unmodified DNA. This transition, unique to the modified DNA, was dependent on divalent cations and occurred most efficiently with Mg2+; however, Ca2+ also stabilized the alternative conformation at low temperature. NMR studies showed that the predominant structure of the modified DNA in sodium phosphate (pH 7) buffer in the absence of Mg2+ was a hairpin containing a 7-nucleotide loop and a stem composed of 3 stable base pairs. In the Mg(2+)-stabilized conformation, the loop became a two-base turn due to the formation of two additional base pairs across the loop.(ABSTRACT TRUNCATED AT 250 WORDS)     

Stable formation of a pyrimidine-rich loop hairpin in a cruciform promoter.

We have determined the solution structure of a TCC-loop hairpin in the cruciform promoter for the bacteriophage N4 virion RNA polymerase (N4 vRNAP). This hairpin and its complementary GGA-loop hairpin are extruded at physiological superhelical density and are required for vRNAP recognition. Contrary to its complementary GGA-loop, the three pyrimidines in the TCC-loop are all unpaired. However, with the help of two juxtaposed stem Watson-Crick G.C base-pairs, each nucleotide in the loop employs a special method to stabilize the hairpin structure. The resulting structures display extensive loop base-stacking rearrangement yet minor backbone distortion, which is largely accomplished through some loop zeta and alpha torsional angle changes. Consistent with the structural studies, UV melting of the GAAGCTCCGCTTC hairpin revealed a higher melting temperature (66 degrees C) than that of the GAACGTCCCGTTC hairpin (58 degrees C) with reversed stem G.C base-pairs, indicating significant contribution from the extra three loop-stem H-bonds. Thermodynamic parameters DeltaG degrees 25of the GAAGCTCCGCTTC hairpin and its complementary GAAGCGGAGCTTC hairpin are -4.1 and -4. 3 kcal/mol respectively, indicating approximately equal contribution of each hairpin to the cruciform formation of the N4 virion RNA polymerase promoter. No significant loop dynamics in the microsecond to millisecond NMR time-scale was observed, and the abundant well-defined exchangeable and non-exchangeable proton NOEs allowed us to efficiently determine a well-converged family for the final structures of the TCC-loop hairpin.     

Purification and characterization of the coliphage N4-coded single-stranded DNA binding protein

We have purified and characterized a single-stranded DNA binding protein (N4 SSB) induced after coliphage N4 infection. It has a monomeric molecular weight of 31,000 and contains 10 tyrosine and 1-2 tryptophan amino acid residues. Its fluorescence spectrum is dominated by the tyrosine residues, and their fluorescence is quenched when the protein binds single-stranded DNA. Fluorescence quenching was used as an assay to quantitate binding of the protein to single-stranded nucleotides. The N4 single-stranded DNA binding protein binds cooperatively to single-stranded nucleic acids and binds single-stranded DNA more tightly than RNA. The binding involves displacement of cations from the DNA and anions from the protein. The apparent binding affinity is very salt-dependent, decreasing as much as 1,000-fold for a 10-fold increase in NaCl concentration. The degree of cooperativity (omega) is relatively independent of salt concentration. At 37 degrees C in 0.22 M NaCl, the protein has an intrinsic binding constant for M13 viral DNA of 3.8 x 10(4) M-1, a cooperativity factor omega of 300, and binding site size of 11 nucleotides per monomer. The protein lowers the melting point of poly(dA.dT).poly(dA-dT) by greater than 60 degrees C but cannot lower the melting transition or assist in the renaturation of natural DNA. N4 single-stranded DNA binding protein enhances the rate of DNA synthesis catalyzed by the N4 DNA polymerase by increasing the processivity of the N4 DNA polymerase and melting out hairpin structures that block polymerization.     

Analysis of melting transitions of the DNA hairpins formed from the oligomer sequences d[GGATAC(X)4GTATCC] (X = A, T, G, C)

Optical melting transitions of the short DNA hairpins formed from the self-complementary DNA oligomers d[GGATACX4GTATCC] where X = A, T, G, or C measured in 100 mM NaCl are presented. A significant dependence of the melting transitions on loop sequence is observed and transition temperatures, tm, of the hairpins vary from 58.3 degrees C for the T4 loop hairpin to 55.3 degrees C for the A4 loop. A nearest-neighbor sequence-dependent theoretical algorithm for calculating melting curves of DNA hairpins is presented and employed to analyze the experimental melting transitions. Experimental melting curves were fit by adjustment of a single theoretical parameter, Fend(n), the weighting function for a hairpin loop comprised of n single-strand bases. Empirically determined values of Fend(n) provide an evaluation of the free-energy of hairpin loop formation and stability. Effects of heterogeneous nearest-neighbor sequence interactions in the duplex stem on hairpin loop formation were investigated by evaluating Fend(n) in individual fitting procedures using two of the published sets of nearest-neighbor stacking interactions in DNA evaluated in 100 mM NaCl and given by Wartell and Benight, 1985. In all cases, evaluated values of Fend(n) were obtained that provided exact theoretical predictions of the experimental transitions. Results of the evaluations indicate: (1) Evaluated free-energies of hairpin loop formation are only slightly dependent on loop sequences examined. At the transition temperature, Tm, the free-energy of forming a loop of four bases is approximately equal for T4, G4, or C4 loops and varies from 3.9 to 4.8 kcal/mole depending on the set of nearest-neighbor interactions employed in the evaluations. This result suggests, in light of the observed differences in stability between the T4, G4, and C4 loop hairpins, that sequence-dependent interactions between base residues of the loop are most likely not the source of the enhanced stability of a T4 loop.(ABSTRACT TRUNCATED AT 400 WORDS)     

Conformational changes in single-strand DNA as a function of temperature by SANS

Small-angle neutron scattering (SANS) measurements were performed on a solution of single-strand DNA, 5'-ATGCTGATGC-3', in sodium phosphate buffer solution at 10 degrees C temperature increments from 25 degrees C to 80 degrees C. Cylindrical, helical, and random coil shape models were fitted to the SANS measurements at each temperature. All the shapes exhibited an expansion in the diameter direction causing a slightly shortened pitch from 25 degrees C to 43 degrees C, an expansion in the pitch direction with a slight decrease in the diameter from 43 degrees C to 53 degrees C, and finally a dramatic increase in the pitch and diameter from 53 degrees C to 80 degrees C. Differential scanning calorimeter scans of the sequence in solution exhibited a reversible two-state transition profile with a transition temperature of 47.5 +/- 0.5 degrees C, the midpoint of the conformational changes observed in the SANS measurements, and a calorimetric transition enthalpy of 60 +/- 3 kJ mol(-1) that indicates a broad transition as is observed in the SANS measurements. A transition temperature of 47 +/- 1 degrees C was also obtained from ultraviolet optical density measurements of strand melting scans of the single-strand DNA. This transition corresponds to unstacking of the bases of the sequence and is responsible for the thermodynamic discrepancy between its binding stability to its complementary sequence determined directly at ambient temperatures and determined from extrapolated values of the melting of the duplex at high temperature.