Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.     

An archaeal chromosomal autonomously replicating sequence element from an extreme halophile, Halobacterium sp. strain NRC-1

We report on the identification and first cloning of an autonomously replicating sequence element from the chromosome of an archaeon, the extreme halophile Halobacterium strain NRC-1. The putative replication origin was identified by association with the orc7 gene and replication ability in the host strain, demonstrated by cloning into a nonreplicating plasmid. Deletion analysis showed that sequences located up to 750 bp upstream of the orc7 gene translational start, plus the orc7 gene and 50 bp downstream, are sufficient to endow the plasmid with replication ability, as judged by expression of a plasmid-encoded mevinolin resistance selectable marker and plasmid recovery after transformation. Sequences located proximal to the two other chromosomally carried haloarchaeal orc genes (orc6 and orc8) are not able to promote efficient autonomous replication. Located within the 750-bp region upstream of orc7 is a nearly perfect inverted repeat of 31 bp, which flanks an extremely AT-rich (44%) stretch of 189 bp. The replication ability of the plasmid was lost when one copy of the inverted repeat was deleted. Additionally, the inverted repeat structure near orc7 homologs in the genomic sequences of two other halophiles, Haloarcula marismortui and Haloferax volcanii, is highly conserved. Our results indicate that, in halophilic archaea, a chromosomal origin of replication is physically linked to orc7 homologs and that this element is sufficient to promote autonomous replication. We discuss the finding of a functional haloarchaeal origin in relation to the large number of orc1-cdc6 homologs identified in the genomes of all haloarchaea to date.     

Features of the replicon of plasmid pAM10.6 of Pseudomonas fluorescens

We describe features of the basic replicon of the 10.6-kb medium-copy-number plasmid pAM10.6. pAM10.6 was able to replicate in various Pseudomonas strains but was maintained in Escherichia coli only after the p15A origin of replication was inserted. Deletion analysis suggests that the pAM10.6 origin of replication is located in a 0.5-kb region that includes inverted and direct repeats upstream of the repA gene. RepA (204 aa) has a clear homology to plasmid replication proteins of some other gram-negative bacteria. The pas (plasmid addiction system) (genes encoded in the region of 480-bp) stabilizes plasmid maintenance in P. putida cells under nonselective conditions for at least 200 generations. A 3.75-kb PstI fragment of pAM10.6 joined to a Km(r) gene was shown to be a minimal plasmid unit maintained in P. putida as a monomer. Further deletions of this 3.75-kb fragment caused a drive to form stable head-to-tail dimeric plasmids in P. putida.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Replication of the Streptomyces plasmid pSN22 through single-stranded intermediates

The replication of the 11 kb conjugative multicopy Streptomyces plasmid pSN22 was analyzed. Mutation and complementation analyses indicated that the minimal region essential for plasmid replication was located on a 1.9 kb fragment of pSN22, containing a trans-acting element encoding a replication protein and a cis-acting sequence acting as a replication origin. Southern hybridization showed that minimal replicon plasmids accumulated much more single-stranded plasmid molecules than did wild-type pSN22. Only one strand was accumulated. A 500 by fragment from the pSN22 transfer region was identified which reduced the relative amount of single-stranded DNA, when added in the native orientation to minimal replicon plasmids. This 500 by DNA sequence may be an origin for second-strand synthesis. It had no effect on the efficiency of co-transformation, plasmid incompatibility, or stability. The results indicate that pSN22 replicates via single-stranded intermediates by a rolling circle mechanism.     

Analysis of pCU1 replication origins: dependence of oriS on the plasmid-encoded replication initiation protein RepA

The broad-host-range replicon of the plasmid pCU1 has three origins of vegetative replication called oriB, oriS, and oriV. In the multi-origin replicon, individual origins can distinguish among replication factors provided by the host. It has been found that during replication in Escherichia coli polA(-) host, oriS was the only active origin of a mutant pCU1 derivative bearing a mutation in the gene encoding replication initiation protein RepA. To further investigate the capacity of oriS to function in an E. coli polA(-) host we constructed a number of clones of the basic replicon of pCU1 containing oriS as the only replication origin. An oriS construct created with pUC18 could transform the polA(-) strain when RepA was supplied in trans. When the oriS region (between nucleotides 290 and 832) was ligated to an antibiotic resistance Omega fragment, the construct could be recovered as a plasmid from polA(+) strain if functional RepA was provided in trans. Our results therefore indicate that the basic replicon of pCU1, containing oriS as the sole origin, does require RepA to initiate plasmid replication in E. coli     

Interaction of the IciA protein with AT-rich regions in plasmid replication origins.

A set of AT-rich repeats is a common motif in prokaryotic replication origins. We have screened for proteins binding to the AT-rich repeat region in plasmids F, R1 and pSC101 using an electrophoretic mobility shift assay with PCR-amplified DNA fragments from the origins. The IciA protein, which is known to bind to the AT-rich repeat region in the Escherichia coli origin of chromosome replication, oriC, was found to bind to the corresponding region from plasmids F (oriS) and R1, but not to pSC101. DNase I footprint analysis showed that IciA interacted with the AT-rich region in both F and R1. When the IciA gene was deleted, the copy number of plasmid F increased somewhat, whereas there was no major effect on the replication of pSC101 and R1, or on the E. coli chromosome.     

Analysis of the replicon region and identification of an rRNA operon on pBM400 of Bacillus megaterium QM B1551

An 18 633 bp region containing the replicon from the approximately 53 kb pBM400 plasmid of Bacillus megaterium QM B1551 has been sequenced and characterized. This region contained a complete rRNA operon plus 10 other potential open reading frames (ORFs). The replicon consisted of an upstream promoter and three contiguous genes (repM400, orfB and orfC) that could encode putative proteins of 428, 251 and 289 amino acids respectively. A 1.6 kb minimal replicon was defined and contained most of repM400. OrfB was shown to be required for stability. Three 12 bp identical tandem repeats were located within the coding region of repM400, and their presence on another plasmid caused incompatibility with their own cognate replicon. Nonsense, frameshift and deletion mutations in repM400 prevented replication, but each mutation could be complemented in trans. RepM400 had no significant similarity to sequences in the GenBank database, whereas five other ORFs had some similarity to gene products from other plasmids and the Bacillus genome. An rRNA operon was located upstream of the replication region and is the first rRNA operon to be sequenced from B. megaterium. Its unusual location on non-essential plasmid DNA has implications for systematics and evolutionary biology.     

Isolation and characterization of a new plasmid pSpnP1 from a multidrug-resistant clone of Streptococcus pneumoniae

A novel Streptococcus pneumoniae plasmid (pSpnP1; 5413bp) has been isolated from the multidrug-resistant clone Poland(23F)-16, and its complete nucleotide sequence has been determined. Sequence analysis predicted seven co-directional open reading frames and comparative analyses revealed that plasmid pSpnP1 is different to pDP1, the only previously described pneumococcal plasmid, whereas it is highly similar to pSt08, a plasmid from Streptococcus thermophilus. A double-stranded origin for replication similar to the replication origin of the pC194/pUB110 family was located upstream of the putative rep gene (orf2). It also contained a 144-bp region with over 60% identity to the single-stranded origin type A of the Streptococcus agalactiae plasmid pMV158/pLS1. Detection of single-stranded DNA by Southern blot analysis indicated that pSpnP1 replicates via a rolling circle mechanism. Interestingly, the product of orf1 has a putative Zonular occludens toxin conserved domain present in toxigenic strains of Vibrio cholerae. Real-time PCR assays revealed that this ORF was expressed. Hybridization experiments showed that the pSpnP1 replicon was unusual among other examined antibiotic-resistant pneumococcal clones, although the recombinant plasmids based on pSpnP1 were able to replicate in Bacillus subtilis and Lactococcus lactis.     

DNA segments of the IncX plasmid R485 determining replication and incompatibility with plasmid R6K

The expression of incompatibility properties between the IncX plasmids R6K and R485 of Escherichia coli was examined. For small autonomously replicating derivatives of both plasmid elements, the requirements for incompatibility expression include a functional R485 replicon and an active R6K beta-origin region. Functional R6K alpha and gamma origins are not directly involved in incompatibility expression between R6K and R485. A trans-acting replication system was constructed for plasmid R485. It consists of a 3.2-(kb) DNA fragment of R485 that specifies a product(s) in trans which supports replication from an R485 origin plasmid. A minimal R485 origin region of 591 bp was derived utilizing this trans-acting replication system and the nucleotide sequence of this origin region determined. The most striking feature of the sequence is the presence of six tandem 22-bp nucleotide sequence direct repeats.     

Genetic Organization of the Basic Replicon of Plasmid pMTH4 of a Facultatively Methylotrophic Bacterium <Emphasis Type="Italic">Paracoccus methylutens</Emphasis> DM12

Two functional regions within the basic replicon of plasmid pMTH4 of Paracoccus methylutens DM12 have been distinguished that are responsible for the replication of the plasmid (REP) and its stabilization (STA). In the REP region, a gene encoding the putative replication initiation protein RepA has been identified, with the highest similarity to the replication protein of plasmid pALC1 (Paracoccus alcaliphilus). The potential origin of replication (oriV), consisting of five long repeated sequences (iterons) as well as putative DnaA and IHF boxes, has been localized in the promoter region of the gene repA. The STA region was found to ensure stability for heterogeneous plasmid pABW3 that is unstable itself in paracocci. The mini-STA region (850 bp) contains two short open reading frames, one of which shows similarity to the RelB protein of Escherichia coli. Our investigations suggest that the stabilizing system of pMTH4 is based on the toxin and antidote principle.     

Influence of different functional elements of plasmid pGT232 on maintenance of recombinant plasmids in Lactobacillus reuteri populations in vitro and in vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Boundaries of the pSC101 minimal replicon are conditional.

The DNA segment essential for plasmid replication commonly is referred to as the core or minimal replicon. We report here that host and plasmid genes and sites external to the core replicon of plasmid pSC101 determine the boundaries and competence of the replicon and also the efficiency of partitioning. Missense mutations in the plasmid-encoded RepA protein or mutation of the Escherichia coli topoisomerase I gene enable autonomous replication of a 310-bp pSC101 DNA fragment that contains only the actual replication origin plus binding sites for RepA and the host-encoded DnaA protein. However, in the absence of a repA or topA mutation, the DNA-bending protein integration host factor (IHF) and either of two cis-acting elements are required. One of these, the partitioning (par) locus, is known to promote negative DNA supercoiling; our data suggest that the effects of the other element, the inverted repeat (IR) sequences that overlap the repA promoter, are mediated through the IR's ability to bind RepA. The concentrations of RepA and DnaA, which interact with each other and with plasmid DNA in the origin region (T. T. Stenzel, T. MacAllister, and D. Bastia, Genes Dev. 5:1453-1463, 1991), also affect both replication and partitioning. Our results, which indicate that the sequence requirements for replication of pSC101 are conditional rather than absolute, compel reassessment of the definition of a core replicon. Additionally, they provide further evidence that the origin region RepA-DnaA-DNA complex initiating replication of pSC101 also mediates the partitioning of pSC101 plasmids at cell division.