Development of Direct Grafting on Cyclic Olefin Copolymers to Improve Hydrophilicity by Using Bioactive Polymers

ObjectivesTo improve the hydrophilicity of cyclic olefin copolymer, a simple and rapid method using two-stage with ultraviolet irradiation was developed in order to graft a bioactive polymer on the surface of these polymers.Materials and MethodsA bioactive polymer, poly(sodium styrene sulfonate) was grafting in two steps on the cyclic olefin copolymer surface. The process consists to activate the surface with ozone and grafting to under UV irradiation in presence of sodium styrene sulfonate. The presence of polymer on the surfaces was characterized by water contact angle, Fourier transform infrared spectroscopy, scanning electron microscopy with energy dispersive spectroscopy and the quantity of polymer grafted was determined by a colorimetric method.ResultsFirst, the time of UV irradiation for the grafting was studied. The results showed that the maximum grafting rate is reached after 60 minutes of reaction. Second, the influence of the presence of additive on the grafting was investigated. The degree of grafting is significantly reduced compared to a sample without additive.ConclusionWe have developed a simple and fast method to graft a hydrophilic and bioactive polymer covalently to a COC surface.     

A Simple Method to Functionalize PCL Surface by Grafting Bioactive Polymers Using UV Irradiation

Background

Polycaprolactone (PCL) is a biodegradable polymer which is used in tissue engineering applications thanks to its many favorable characteristics. However, PCL surfaces are known as hydrophobic leading to a lack of favorable cell response. To overcome this problem, PCL surfaces will undergo a surface functionalization by grafting bioactive polymers bearing ionic groups.

A Comparative Study of the Bactericidal Activity and Daily Disinfection Housekeeping Surfaces by a New Portable Pulsed UV Radiation Device

Daily cleaning and disinfecting of non-critical surfaces in the patient-care areas are known to reduce the occurrence of health care-associated infections. However, the conventional means for decontamination of housekeeping surfaces of sites of frequent hand contact such as manual disinfection using ethanol wipes are laborious and time-consuming in daily practice. This study evaluated a newly developed portable pulsed ultraviolet (UV) radiation device for its bactericidal activity in comparison with continuous UV-C, and investigated its effect on the labor burden when implemented in a hospital ward. Pseudomonas aeruginosa, Multidrug-resistant P. aeruginosa, Escherichia coli, Acinetobacter baumannii, Amikacin and Ciprofloxacin-resistant A. baumannii, Staphylococcus aureus, Methicillin-resistant S. aureus and Bacillus cereus were irradiated with pulsed UV or continuous UV-C. Pulsed UV and continuous UV-C required 5 and 30 s of irradiation, respectively, to attain bactericidal activity with more than 2Log growth inhibition of all the species. The use of pulsed UV in daily disinfection of housekeeping surfaces reduced the working hours by half in comparison to manual disinfection using ethanol wipes. The new portable pulsed UV radiation device was proven to have a bactericidal activity against critical nosocomial bacteria, including antimicrobial-resistant bacteria after short irradiation, and was thus found to be practical as a method for disinfecting housekeeping surfaces and decreasing the labor burden.     

Lack of protection of prior heat shock against UV-induced oxidative stress in human skin fibroblasts

Abstract

The effect of prior hyperthermia on UV-induced oxidative stress was studied in human skin fibroblasts. UV radiation alone induced an increased release of superoxide anions and increased lipid peroxidation in skin fibroblasts accompanied by a rise in catalase and superoxide dismutase activities. Hyperthermia was found to induce a significant rise in the cell content of heat-shock proteins, HSP60 and HSP70, but this treatment prior to UV radiation did not influence any indicators of oxidative stress in the fibroblasts. In contrast, the combination of heat shock prior to UV-exposure reduced fibroblast cell viability compared with UV radiation-exposure alone.     

Osteoclastogenic differentiation of human precursor cells over micro- and nanostructured hydroxyapatite topography

BackgroundSurface topography is a key parameter in bone cells–biomaterials interactions. This study analyzed the behavior of human osteoclast precursor cells cultured over three hydroxyapatite (HA) surfaces ranging from a micro- to nanoscale topography.MethodsHA surfaces were prepared with microsized HA particles, at 1300 °C (HA1), and with nanosized HA particles at 1000 °C (HA2) and 830 °C (HA3). Human osteoclast precursors were cultured in the absence or presence of M-SCF and RANKL.ResultsHA surfaces had similar chemical composition, however, HA1 and HA3 presented typical micro- and nanostructured topographies, respectively, and HA2 profile was between those of HA1 and HA3. The decrease on the average grain diameter to the nanoscale range (HA3) was accompanied by an increase in surface area, porosity and hydrophilicity and a decrease in roughness. Compared to HA1 surface, HA3 allowed a lower osteoclastic adhesion, differentiation and function. Differences in the cell response appeared to be associated with the modulation of relevant intracellular signaling pathways.ConclusionsThe decrease in HA grain size to a biomimetic nanoscale range, appears less attractive to osteoclastic differentiation and function, compared to the HA microsized topography.General significanceThis observation emphasizes the role of surface topography in designing advanced biomaterials for tailored bone cells response in regenerative strategies.     

Wetting control through topography and surface hydrophilic/hydrophobic property changes by coarse grained simulation

Abstract

The changes of wetting state of water droplet on the solid surface featuring pillared structures are quantitatively studied by Coarse Grained simulation. Our results demonstrate that wetting state changes with the different topography (surface roughness), and it depends on the intrinsic hydrophilic/hydrophobic property of surface as well. Only if the contact angle of water droplet on the smooth surface is larger than 93.13°, the wetting state translates from the Wenzel state to the Cassie state on the rough surface with certain pillar height and width, and the contact angle climb up to the highest point and then remain almost unchanged with the increasing of pillar height and the same pillar distance. However, the wetting state does not change if the contact angle on the smooth surface is 85.1° or less, no matter what pillar structure the surface has. Additionally, the contact angles will remain almost unchanged if the pillar height is higher than a certain value. Our simulation results provide a quantitative understanding about the wetting state of water droplet on solid rough surfaces, and the results show the wetting state can be controlled by combining rough structure design and hydrophilic/hydrophobic property change of surfaces.     

Involvement of alkylhydroxybenzenes in the <Emphasis Type="Italic">Escherichia coli</Emphasis> response to the lethal effect of UV irradiation

This work is concerned with the role of alkylhydroxybenzenes (AHBs), chemical analogs of the autoregulatory microbial d ₁ factors, on the development of the stress response of bacterial cells to UV irradiation, including SOS system induction, preservation of cell viability, and S → R phase transitions of the Escherichia coli test strain with the bioluminescence genes cloned under the control of the recA gene promoter. UV irradiation, a natural stress factor, and an increase in AHB concentrations were found to elicit uniform responses in bacteria, indicating that AHBs function as alarmones, i.e., alarm signals. It was revealed that preincubating bacteria with alkylhydroxybenzenes considerably enhanced their viability upon irradiation with lethal UV doses; this was accompanied by a relative decrease in the SOS response activity and a concomitant increase in the frequency of phase transitions. The efficiency of the protective action of AHBs increased with an increase in their hydrophobicity degree. The probable mechanism of the protective effect of AHBs is discussed, based on their capacity for the interaction with biopolymers, which results in changing their structural organization and conferring resistance to a broad spectrum of stress factors. Such a “passive” protective mechanism reduces the susceptibility of DNA to UV irradiation, causing a decrease in the parameters related to the SOS system induction that is responsible for the “active” protective mechanism in bacterial cells. As a result, viability retention under the lethal influence of UV irradiation is possible at minimal values of repair activity and is accompanied by an increase in the phenotypic variability of the surviving part of a bacterial population.     

Influence of physicochemical properties on the hygienic status of stainless steel with various finishes

The relative hygienic status of 16 stainless steel surfaces, characterised by topography and surface free energy was investigated. B. thuringiensis spores suspended in Bechamel sauce was chosen as the test fouling suspension. Surface topography was assessed using 10 standardised roughness parameters, along with scanning electron microscope observations. The number of residual adhering spores after a fouling and cleaning in place procedure was found to be influenced by the topography of the stainless steel surface, but not by the surface free energy. Among the various roughness parameters, R_A, R_RR R_PK and R_VK were shown to be related to the hygienic status. Microscopic observations demonstrated the influence of the shape and size of surface irregularities on the level of residual soil after cleaning. This confirms that the use of only one roughness parameter, usually R_A, is not sufficient in defining the hygienic status of stainless steel surfaces.     

Micro-fabricated polydimethyl siloxane (PDMS) surfaces regulate the development of marine microbial biofilm communities

This study explored an antifouling (AF) concept based on deployment of microfabricated polydimethyl siloxane (PDMS) surfaces with 1–10?μm periodicity corrugated topographies in temperate marine waters. The effect of the surfaces on the development of microbial biofilms over 28?days and during different seasons, including both summer and winter, was examined using confocal laser scanning microscopy (CLSM) as well as terminal restriction fragment (T-RF) analysis for phylogenetic fingerprinting. The microscale topography significantly impacted biofilm development by altering the attachment pattern and reducing microcolony formation on the 1, 2 and 4?μm PDMS surfaces. Also, field deployments over 28?days showed a significant reduction in biovolume on the 4 and 10?μm PDMS surfaces despite altered environmental conditions. The microfabricated PDMS surfaces further significantly impacted on the community composition of the biofilms, as revealed by changes in T-RF profiles, at different stages of development. Moreover, altered biofilm resistance was demonstrated by exposing pre-established biofilms on 10?μm micro-fabricated surfaces to enhanced flagellate predation by a heterotrophic protist, Rhynchomonas nasuta. Pronounced changes in the overall marine microbial biofilm development as well as community composition warrant exploring substratum modification for marine AF applications.     

Survival of Spacecraft-Associated Microorganisms under Simulated Martian UV Irradiation

Spore-forming microbes recovered from spacecraft surfaces and assembly facilities were exposed to simulated Martian UV irradiation. The effects of UVA (315 to 400 nm), UVA+B (280 to 400 nm), and the full UV spectrum (200 to 400 nm) on the survival of microorganisms were studied at UV intensities expected to strike the surfaces of Mars. Microbial species isolated from the surfaces of several spacecraft, including Mars Odyssey, X-2000 (avionics), and the International Space Station, and their assembly facilities were identified using 16S rRNA gene sequencing. Forty-three Bacillus spore lines were screened, and 19 isolates showed resistance to UVC irradiation (200 to 280 nm) after exposure to 1,000 J m⁻² of UVC irradiation at 254 nm using a low-pressure mercury lamp. Spores of Bacillus species isolated from spacecraft-associated surfaces were more resistant than a standard dosimetric strain, Bacillus subtilis 168. In addition, the exposure time required for UVA+B irradiation to reduce the viable spore numbers by 90% was 35-fold longer than the exposure time required for the full UV spectrum to do this, confirming that UVC is the primary biocidal bandwidth. Among the Bacillus species tested, spores of a Bacillus pumilus strain showed the greatest resistance to all three UV bandwidths, as well as the total spectrum. The resistance to simulated Mars UV irradiation was strain specific; B. pumilus SAFR-032 exhibited greater resistance than all other strains tested. The isolation of organisms like B. pumilus SAFR-032 and the greater survival of this organism (sixfold) than of the standard dosimetric strains should be considered when the sanitation capabilities of UV irradiation are determined.     

紫外辐照恢复早期耐辐射奇球菌的转录组学分析（英文）

目的 耐辐射奇球菌是一种对紫外线、电离、干燥和化学试剂具有较强抗性的极端微生物。然而，该菌在紫外辐照后恢复早期的分子响应还不完全清楚。本文的目的是揭示耐辐射奇球菌在这一阶段的转录组响应。方法 本研究采用RNA-seq技术，测定了正常和紫外辐照培养条件下耐辐射奇球菌的转录组。为确定关键的差异表达基因及其调控关系，进行了功能富集分析。选取部分关键差异表达基因，进行实时定量PCR实验验证。利用以往研究中的转录组数据，寻找紫外辐照、电离辐射和干燥胁迫条件下公共的差异表达基因。构建了蛋白质-蛋白质相互作用网络；对蛋白质互作网络中的枢纽基因和主要模块进行了鉴定；对这些枢纽基因和模块进行了功能富集分析。结果 紫外辐照后的恢复早期，上调基因数量是下调基因数量的2倍以上，且多数与应激反应和DNA修复有关。恢复早期的修复途径主要有单链退火（SSA）途径（涉及基因：ddr A-D）、非同源端连接（NHEJ）途径（涉及基因：lig B、ppr A）和核苷酸切除修复（NER）途径（涉及基因：uvr A-C），前两种途径为同源重组（HR）做准备，而NER途径去除紫外线照射带来的嘧啶二聚体。通过比较紫外辐照、电离辐...     

Enhanced Compliant Adhesive Design and Fabrication with Dual-Level Hierarchical Structure

<正> Synthetic dry adhesives inspired by the nano-and micro-scale hairs found on the feet of geckos and some spiders have beendeveloped for almost a decade. Elastomeric single level micro-scale mushroom shaped fibres are currently able to function evenbetter than natural dry adhesives on smooth surfaces under normal loading. However, the adhesion of these single level syntheticdry adhesives on rough surfaces is still not optimal because of the reduced contact surface area. In nature, contact area ismaximized by hierarchically structuring different scales of fibres capable of conforming surface roughness. In this paper, weadapt the nature's solution arid propose a novel dual-level hierarchical adhesive design using Polydimethylsiloxane (PDMS),which is tested under peel loading at different orientations. A negative macro-scale mold is manufactured by using a laser cutterto define holes in a Poly(methyl methacrylate) (PMMA) plate. After casting PDMS macro-scale fibres by using the obtainedPMMA mold, a previously prepared micro-fibre adhesive is bonded to the macro-scale fibre substrate. Once the bondingpolymer is cured, the micro-fibre adhesive is cut to form macro scale mushroom caps. Each macro-fibre of the resulting hierarchicaladhesive is able to conform to loads applied in different directions. The dual-level structure enhances the peel strengthon smooth surfaces compared to a single-level dry adhesive, but also weakens the shear strength of the adhesive for a given areain contact. The adhesive appears to be very performance sensitive to the specific size of the fibre tips, and experiments indicatethat designing hierarchical structures is not as simple as placing multiple scales of fibres on top of one another, but can requiresignificant design optimization to enhance the contact mechanics and adhesion strength.     

Impact of surface energy and roughness on cell distribution and viability

Abstract

The aim of this study was to assess the respective impacts of the surface energy and surface roughness of bare and coated steels on biofouling and sanitisation. Bioadhesion of Staphylococcus aureus CIP 53.154 was studied on two stainless steel surfaces with smooth or specific micro-topography. Two coatings were also studied: silicon oxide (hydrophilic) and polysiloxane (hydrophobic). On smooth surfaces, adhesion was reduced on an apolar coating and cell viability increased with the surface polarity. A specific micro-topography decreased the level of bacterial adhesion on bare surfaces by a factor ten. On this surface, only single adherent cells were observed, contrasting with cells in clusters on smoother surfaces. As a consequence, cell repartition influenced bacterial viability. Most isolated adherent cells were dead whereas cells in clusters were still alive. In addition, the quaternary ammonium chloride used in sanitisation, acted at once both as a tensio-active molecule and a biocide. It only displaced adherent cells but did not remove them.     

Effectiveness of Antifouling Coatings and Water Flow in Controlling Attachment of the Nuisance Mussel Limnoperna fortunei

Various antifouling substrata were tested for their effectiveness in inhibiting attachment of Limnoperna fortunei. Field experiments revealed that surface properties affected the antifouling capabilities of nontoxic substrata. Antifouling capabilities were observed for three silicone resin-based coatings with smooth surfaces (<30 w m roughness) and low surface free energy of the hydrogen bonding force component. A further three silicone resin-based coatings tested, as well as other types of nontoxic coatings, did not show any antifouling capabilities. The percentages of juvenile mussels that attached in laboratory experiments correlated with the settling densities of mussels in the field experiments better than those based on adult mussels. This suggests that laboratory experiments with juveniles may be effective as short term preliminary assays to select promising materials/coatings for longer term field experiments. Mussel abundance surveys within a water transmission pipe and pipe current velocity simulation revealed that less infestation was observed in the areas with a wall-vicinity fluid velocity of >1.3 m s m 1 . Conversely, pipe surfaces with flows of <1.2 m s m 1 were heavily fouled by L. fortunei .     

Ultraviolet disinfection of Schistosoma mansoni cercariae in water

BackgroundSchistosomiasis is a parasitic disease that is transmitted by skin contact with waterborne schistosome cercariae. Mass drug administration with praziquantel is an effective control method, but it cannot prevent reinfection if contact with cercariae infested water continues. Providing safe water for contact activities such as laundry and bathing can help to reduce transmission. In this study we examine the direct effect of UV light on Schistosoma mansoni cercariae using ultraviolet light-emitting diodes (UV LEDs) and a low-pressure (LP) mercury arc discharge lamp.MethodologyS. mansoni cercariae were exposed to UV light at four peak wavelengths: 255 nm, 265 nm, 285 nm (UV LEDs), and 253.7 nm (LP lamp) using bench scale collimated beam apparatus. The UV fluence ranged from 0–300 mJ/cm² at each wavelength. Cercariae were studied under a stereo-microscope at 0, 60, and 180 minutes post-exposure and the viability of cercariae was determined by assessing their motility and morphology.ConclusionVery high UV fluences were required to kill S. mansoni cercariae, when compared to most other waterborne pathogens. At 265 nm a fluence of 247 mJ/cm² (95% confidence interval (CI): 234–261 mJ/cm²) was required to achieve a 1-log₁₀ reduction at 0 minutes post-exposure. Cercariae were visibly damaged at lower fluences, and the log reduction increased with time post-exposure at all wavelengths. Fluences of 127 mJ/cm² (95% CI: 111–146 mJ/cm²) and 99 mJ/cm² (95% CI: 85–113 mJ/cm²) were required to achieve a 1-log₁₀ reduction at 60 and 180 minutes post-exposure at 265 nm. At 0 minutes post-exposure 285 nm was slightly less effective, but there was no statistical difference between 265 nm and 285 nm after 60 minutes. The least effective wavelengths were 255 nm and 253.7 nm. Due to the high fluences required, UV disinfection is unlikely to be an energy- or cost-efficient water treatment method against schistosome cercariae when compared to other methods such as chlorination, unless it can be demonstrated that UV-damaged cercariae are non-infective using alternative assay methods or there are improvements in UV LED technology.     

Combinatorial materials research applied to the development of new surface coatings IV. A high-throughput bacterial biofilm retention and retraction assay for screening fouling-release performance of coatings

Abstract

A high-throughput bacterial biofilm retention screening method has been augmented to facilitate the rapid analysis and down-selection of fouling-release coatings for identification of promising candidates. Coatings were cast in modified 24-well tissue culture plates and inoculated with the marine bacterium Cytophaga lytica for attachment and biofilm growth. Biofilms retained after rinsing with deionised water were dried at ambient laboratory conditions. During the drying process, retained biofilms retracted through a surface de-wetting phenomenon on the hydrophobic silicone surfaces. The retracted biofilms were stained with crystal violet, imaged, and analysed for percentage coverage. Two sets of experimental fouling-release coatings were analysed with the high-throughput biofilm retention and retraction assay (HTBRRA). The first set consisted of a series of model polysiloxane coatings that were systematically varied with respect to ratios of low and high MW silanol-terminated PDMS, level of cross-linker, and amount of silicone oil. The second set consisted of cross-linked PDMS-polyurethane coatings varied with respect to the MW of the PDMS and end group functionality. For the model polysiloxane coatings, HTBRRA results were compared to data obtained from field immersion testing at the Indian River Lagoon at the Florida Institute of Technology. The percentage coverage calculations of retracted biofilms correlated well to barnacle adhesion strength in the field (R² = 0.82) and accurately identified the best and poorest performing coating compositions. For the cross-linked PDMS-polyurethane coatings, the HTBRRA results were compared to combinatorial pseudobarnacle pull-off adhesion data and good agreement in performance was observed. Details of the developed assay and its implications in the rapid discovery of new fouling-release coatings are discussed.     

Implication of the small GTPase Rac1 in the apoptosis induced by UV in Rat-2 fibroblasts.

Exposure of mammalian cells to ultraviolet (UV) light elicits a cellular response and also lead to apoptotic cell death. However, the role of Rac, a member of Rho family GTPases, in the UV-induced apoptosis has never been examined. In UV-irradiated Rat-2 fibroblasts, nuclear fragmentation began to be observed within 2 h and the total viability of Rat-2 cells were only about 15% at 6 h following by UV irradiation, whereas the total viability in Rat2-Rac(N17) cells stably expressing RacN17, a dominant negative Rac1 mutant, was almost close to 67%. Pretreatment with SB203580, a specific inhibitor of p38 kinase, likewise attenuated UV-induced cell death, but PD98059, a MEK inhibitor, did not. Thus, Rac1 and p38 kinase appear to be components in the apoptotic signaling pathway induced by UV irradiation in Rat-2 fibroblasts. In addition, our results show that p38 kinase stimulation by UV is dramatically inhibited by RacN17, suggesting that p38 kinase is situated downstream of Rac1 in the UV signaling to apoptosis.     

Solvent-free vapor-phase photografting of acrylamide onto poly(ethylene terephthalate)

Poly(ethylene terphthalate) (PET) films were photografted under reduced pressure in a solvent-free vapor of acrylamide and a co-initiator, benzophenone. Characterization of grafted samples by ESCA and contact angles showed that the grafting increased with grafting time and temperature. The amide groups obtained by the acrylamide grafting were converted into amine groups by the Hofmann rearrangement to be used in coupling reactions. The amine groups were confirmed by reaction with pentafluorobenzoyl chloride, which provides a fluorine label for ESCA. Surface grafting of polymeric substrates in the vapor phase induced by plasma or high energy and UV irradiation is reviewed.     

Alignment of skeletal muscle myoblasts and myotubes using linear micropatterned surfaces ground with abrasives

Alignment of cells plays a significant key role in skeletal muscle tissue engineering because skeletal muscle tissue in vivo has a highly organized structure consisting of long parallel multinucleated myotubes formed through differentiation and fusion of myoblasts. In the present study, we developed an easy, simple, and low‐cost method for aligning skeletal muscle cells by using surfaces with linear microscale features fabricated by grinding. Iron blocks were ground in one direction with three kinds of abrasives (9 µm diamond suspension, #400 sandpaper, and #150 sandpaper) and then used as molds to make micropatterned polydimethylsiloxane (PDMS) substrates (type I, type II, and type III). Observation of the surface topography revealed that the PDMS substrates exhibited different degree of mean roughness (Ra), 0.03 µm for type I, 0.16 µm for type II, and 0.56 µm for type III, respectively. Murine skeletal muscle cell line C2C12 myoblasts were cultured and differentiated on the patterned PDMS substrates, and it was examined whether the alignment of C2C12 myoblasts and myotubes was possible. Although the cell growth and differentiation on the three types of patterned substrates were similar to those on the flat PDMS substrate as a control, the alignment of both C2C12 myoblasts and myotubes was obviously observed on types II and III, but not on type I or the control substrate. These results indicate that surfaces ground with abrasives will be useful for fabricating aligned skeletal muscle tissues. Biotechnol. Bioeng. 2009;103: 631–638. © 2009 Wiley Periodicals, Inc.     

Genetic recombination of herpes simplex virus, the role of the host cell and UV-irradiation of the virus

Summary Recombination frequencies for two sets of genetic markers of herpes simplex virus were determined in various host cells with and without ultraviolet irradiation of the virus. UV irradiation increased the recombination frequency in all the cell types studied in direct proportion to the unrepaired lethal damage. In human skin fibroblasts derived from a patient with xeroderma pigmentosum (XP) of complementation group A, a given dose of UV stimulated recombination more than that in fibroblasts from normal individuals. On the other hand, UV stimulation of HSV recombination was slightly less than normal in fibroblasts derived from a patient with a variant form XP and from an ataxia telangiectasia patient. Caffeine, an agent known to inhibit repair of UV damage, reduced recombination in most of the cell types studied but did not suppress the UV-induced increase in recombination. These findings suggest that for virus DNA with the same number of unrepaired UV-lesions, each of the tested cell types promoted HSV-recombination to an equivalent extent.