聚氨酯塑料的微生物降解

未被合理处置的废塑料污染已成为全球性的环境问题,探索塑料废弃物的无害化处理技术势在必行。近来,研究证实了自然界中存在可以降解塑料的微生物及酶。利用微生物或酶对废塑料进行生物处理成为可能。聚氨酯塑料(Polyurethane,PUR)是广泛应用的通用塑料之一,其废弃物量已占到所有废塑料总体积的30%。文中将PUR塑料发明应用70年来有关微生物降解的研究进行了全面综述,对PUR塑料降解真菌、细菌、降解基因与酶、降解产物及相关的生物处理技术系统等进行了总结与分析,并对实现PUR废塑料高效生物处理需解决的关键科学问题进行了展望。     

New perspectives in plastic biodegradation

During the past 50 years new plastic materials, in various applications, have gradually replaced the traditional metal, wood, leather materials. Ironically, the most preferred property of plastics--durability--exerts also the major environmental threat. Recycling has practically failed to provide a safe solution for disposal of plastic waste (only 5% out of 1 trillion plastic bags, annually produced in the US alone, are being recycled). Since the most utilized plastic is polyethylene (PE; ca. 140 million tons/year), any reduction in the accumulation of PE waste alone would have a major impact on the overall reduction of the plastic waste in the environment. Since PE is considered to be practically inert, efforts were made to isolate unique microorganisms capable of utilizing synthetic polymers. Recent data showed that biodegradation of plastic waste with selected microbial strains became a viable solution.     

Plastic ingestion in Asian elephants in the forested landscapes of Uttarakhand,India

Ecological impacts of plastic contamination on marine environment have been documented extensively, however its spread and impacts on terrestrial and freshwater fauna are still poorly understood. In the present study, we investigated diet of Asian elephant (Elephas maximus indicus) for plastic ingestion around forested habitats of Uttarakhand state in India. We quantified plastic particles and other anthropogenic waste from elephant dung samples collected from edges and interiors of forest areas, confirming plastic ingestion by this endangered mammal species. Each human-derived item was identified, measured, and sub-categorized into plastic or other anthropogenic waste. About one-third (32%) of the elephant dung samples showed presence of anthropogenic waste. Plastic particles ranging from size 1–355 mm, comprised of 85% of the waste recovered from elephant dung samples (47.08 ± 12.85 particles per sample). We found twice as many plastic particles (85.27 ± 33.7/ 100 g) in samples collected from inside forest as compared to forest edge (35.34 ± 11.14 plastic particles/100 g). A higher count (34.79 ± 28.41 items/100 g sample) of non-biodegradable anthropogenic waste (glass, metal, rubber bands, clay pottery and tile pieces) was obtained from samples collected inside the forest area samples as compared to forest edge samples (9.44 ± 1.91items/100 g). There were higher proportion of macroplastic (>5 mm) retrieved than microplastic (1–5 mm) in the elephant dung. The present study is the first systematic documentation of non-biodegradable waste ingestion by Asian elephants. High plastic presence in elephant dung highlights its widespread use near protected habitats and lack of waste segregation practices underlining the vulnerability of wild animals to plastic ingestion risk. We provide recommendations for developing a comprehensive solid waste management strategy to mitigate the threat of plastic pollution around critical elephant habitats in India.     

CO2 reduction potentials by utilizing waste plastics in steel works

Background, aim, and scope  Feedstock recycling has received attention as an effective method to recycle waste plastics. However, estimating the reduction potential by life cycle assessment using coke oven and blast furnace in steel works has been a challenging task due to the complex structure of energy flow in steel works. Municipal waste plastics consist of several plastic resins. Previous studies have generally disregarded the composition of waste plastics, which varies significantly depending on the geographical area. If the reduction potentials by using each plastic resin in steel works can be quantified, the potential of municipal waste plastics (mixtures of plastic resins) can be estimated by summing up the potential of each resin multiplied by the composition of each resin in municipal waste plastics. Therefore, the goal of this study is to investigate the reduction potentials of CO₂ emissions by using individual plastic resins (polyethylene (PE), polypropylene (PP), polystyrene (PS), polyethylene terephthalate (PET)) and those for municipal waste plastics in the coke oven and blast furnace. Materials and methods  A model was developed to clarify the energy flow in steel works. In order to estimate the changes in energy and material balance in coke ovens when waste plastics are charged, the equations to calculate the coke product yield, gas product yield, and oil product yields of each plastic resin were derived from previous studies. The Rist model was adopted to quantify the changes in the inputs and outputs when plastics were fed into a blast furnace. Then, a matrix calculation method was used to calculate the change in energy balance before and after plastics are fed into a coke oven. Results  It was confirmed that product yields of municipal waste plastics (mixtures of plastic resins) could be estimated by summing up the product yield of each plastic resin multiplied by the composition of each resin in municipal waste plastics. In both cases of coke oven and blast furnace feedstock recycling, the reduction potential of CO₂ emissions varies significantly depending on the plastic resins. For example, in the case of coke oven chemical feedstock recycling, the reduction potential of PS and PP is larger than that of PE. On the other hand, in the case of blast furnace feedstock recycling, PE has the largest CO₂ emissions reduction potential, whereas the CO₂ emission reduction potential of PP is smaller than those of PE and PS. In both cases, PET has negative CO₂ emission reduction potentials, i.e., there is an increase of CO₂ emissions. In addition, the reduction potentials of CO₂ emissions are slightly different in each city. Discussions  The differences in the reduction potentials of CO₂ emissions by coke oven chemical feedstock recycling of each plastic resin is attributable to the differences in calorific values and coke product yields of each plastic resin. On the other hand, the difference in the CO₂ emission reduction potential for each plastic resin in blast furnace feedstock recycling is attributable to the difference in calorific values and the carbon and hydrogen content of each plastic resin, which leads to a difference in the coke substitution effect by each plastic resin. In both cases, the difference in those of municipal waste plastics is mostly attributable to the amount of impurities (e.g., ash, water) in the municipal waste plastics. Conclusions  It was found that the reduction potential of CO₂ emissions by coke oven and blast furnace feedstock recycling of municipal waste plastics (mixtures of plastic resins) could be estimated by summing up the potential of each resin multiplied by the composition of each resin in municipal waste plastics. It was also clarified that feedstock recycling of waste plastic in steel works is effective for avoiding the increase in CO₂ emissions by incinerating waste plastics, such as those from household mixtures of different resins. Recommendations and perspectives  With the results obtained in this study, reduction potentials of CO₂ emissions can be calculated for any waste plastics because differences in composition are taken into account.     

Potentials and limits of mechanical plastic recycling

Plastics consumption continues to steeply increase worldwide, while resultant waste is currently mostly landfilled, discarded to the environment, or incinerated. This significantly contributes to global warming and causes negative health and ecosystem effects. Increasing the circularity of plastics can reduce these impacts. This study investigated to which extent plastics' circularity can be increased by mechanical recycling. For this purpose, future scenarios involving increased waste collection, improved product design, and improved waste sorting were assessed. The system studied consists of 11 plastic types in 69 product groups consumed and arising as waste in Switzerland. By means of a material flow analysis, the amounts of consumption, waste, and secondary material utilizable in product manufacturing were quantified for the year 2040. For the waste not mechanically recycled, treatment situations mainly involving energy recovery in waste-to-energy plants and cement kilns were modeled. A life cycle assessment of the complete plastic material flow system was conducted. We found that the mechanical recycling rate calculated based on the utilizable secondary material can be increased to up to 31%. This can lower the plastic carbon footprint by one quarter (1.3% of today's total Swiss carbon footprint) compared to no recycling. Important barriers to a further increase of the recycling rate were inaccessibility, the large diversity of plastic grades, and contamination. The remaining impact at maximum recycling is mainly caused by polyurethanes, polypropylene, and polystyrene production. In conclusion, the potential of mechanical plastic recycling is limited, but it can, as one of several measures, contribute to combating climate change.     

以生活垃圾堆肥为基质的废弃物铺网草皮建植研究

以生活垃圾堆肥为基质,5种生活废弃物为铺网,对高羊茅、草地早熟禾及本特3种草坪植物的草皮培植与铺坪应用进行了研究.结果表明:(1)在草皮培植中,同种草坪植物在不同铺网草皮中的生长效应差异较大,其中早熟禾在草席与塑料纱网草皮中的综合性能表现较好;本特和高羊茅在竹席和草席中的表现较好.(2)草皮的刈割再生生长能力总体上与草皮培植时的生长状况密切相关,草种与基质、铺网间的协同性存在差异,生长协同性较好的草皮组合为早熟禾的草席草皮、本特的草席与塑料纱网草皮以及高羊茅的草席、纤维网袋与塑料纱网草皮.(3)5种生活废弃物铺网中,塑料薄膜在草皮培植中与各草种间的协同性均最差,其铺网草皮在铺坪应用中的再生生长能力也较差,可见塑料薄膜不适宜作为草皮铺网.     

Enrichment of native plastic-associated biofilm communities to enhance polyester degrading activity

Plastic pollution is an increasing worldwide problem urgently requiring a solution. While recycling rates are increasing globally, only 9% of all plastic waste has been recycled, and with the cost and limited downstream uses of recycled plastic, an alternative is needed. Here, we found that expanded polystyrene (EPS) promoted high levels of bacterial biofilm formation and sought out environmental EPS waste to characterize these native communities. We demonstrated that the EPS attached communities had limited plastic degrading activity. We then performed a long-term enrichment experiment where we placed a robust selection pressure on these communities by limiting carbon availability such that the waste plastic was the only carbon source. Seven of the resulting enriched bacterial communities had increased plastic degrading activity compared to the starting bacterial communities. Pseudomonas stutzeri was predominantly identified in six of the seven enriched communities as the strongest polyester degrader. Sequencing of one isolate of P. stutzeri revealed two putative polyesterases and one putative MHETase. This indicates that waste plastic-associated biofilms are a source for bacteria that have plastic-degrading potential, and that this potential can be unlocked through selective pressure and further in vitro enrichment experiments, resulting in biodegradative communities that are better than nature.     

Future focuses of enzymatic plastic degradation

Enzyme-based plastic degradation and valorization of the plastic-derived monomers has emerged as a potent option to address the plastic waste dilemma. Obstacles in implementing the enzymatic degradation of plastics in industry are here summarized, and strategies to overcome these obstacles are discussed to exploit the full potential of enzymatic plastic degradation toward a sustainable plastic economy.     

Quality Assessment and Circularity Potential of Recovery Systems for Household Plastic Waste

Plastic recycling is promoted in the transition toward a circular economy and a closed plastic loop, typically using mass‐based recycling targets. Plastic from household waste (HHW) is contaminated and heterogeneous, and recycled plastic from HHW often has a limited application range, due to reduced quality. To correctly assess the ability to close plastic loops via recycling, both plastic quantities and qualities need to be evaluated. This study defines a circularity potential representing the ability of a recovery system to close material loops assuming steady‐state market conditions. Based on an average plastic waste composition including impurities, 84 recovery scenarios representing a wide range of sorting schemes, source‐separation efficiencies, and material recovery facility (MRF) configurations and performances were assessed. The qualities of the recovered fractions were assessed based on contamination and the circularity potential calculated for each scenario in a European context. Across all scenarios, 17% to 100% of the generated plastic mass could be recovered, with higher source‐separation and MRF efficiencies leading to higher recovery. Including quality, however, at best 55% of the generated plastic was suitable for recycling due to contamination. Source‐separation, a high number of target fractions, and efficient MRF recovery were found to be critical. The circularity potential illustrated that less than 42% of the plastic loop can be closed with current technology and raw material demands. Hence, Europe is still far from able to close the plastic loop. When transitioning toward a circular economy, the focus should be on limiting impurities and losses through product design, technology improvement, and more targeted plastic waste management.     

微生物降解塑料的研究进展

塑料广泛应用于人类的生活中,其中约80%的塑料垃圾被填埋,最终成为陆地和海洋垃圾。由于管理与处置不善,这些废弃物造成了巨大的环境污染,目前回收再利用是较好的处置方式,但对某些塑料废弃物并没有妥善的处置方式。生物降解作为环境友好的处置方式,具有巨大的应用潜力。本文对聚对苯二甲酸乙二醇酯、聚乙烯、聚氯乙烯、聚丙烯、聚苯乙烯和聚氨酯这6种常用塑料的降解微生物及生物降解机制进行了总结,对目前微生物降解塑料存在的问题进行了分析,并提出了促进微生物降解塑料应用的途径,为生物降解塑料菌株和降解酶的开发应用、降解机制研究提供理论参考。     

Assessment of polyethylene degradation by biosurfactant producing ligninolytic bacterium

Biodegradation - Accumulation of plastic waste has become an environmental threat and a global problem. In this research, polyethylene degrading ligninolytic bacteria were isolated from plastic...     

Degradation of Oxo-Biodegradable Plastic by Pleurotus ostreatus

Growing concerns regarding the impact of the accumulation of plastic waste over several decades on the environmental have led to the development of biodegradable plastic. These plastics can be degraded by microorganisms and absorbed by the environment and are therefore gaining public support as a possible alternative to petroleum-derived plastics. Among the developed biodegradable plastics, oxo-biodegradable polymers have been used to produce plastic bags. Exposure of this waste plastic to ultraviolet light (UV) or heat can lead to breakage of the polymer chains in the plastic, and the resulting compounds are easily degraded by microorganisms. However, few studies have characterized the microbial degradation of oxo-biodegradable plastics. In this study, we tested the capability of Pleurotus ostreatus to degrade oxo-biodegradable (D₂W) plastic without prior physical treatment, such as exposure to UV or thermal heating. After 45 d of incubation in substrate-containing plastic bags, the oxo-biodegradable plastic, which is commonly used in supermarkets, developed cracks and small holes in the plastic surface as a result of the formation of hydroxyl groups and carbon-oxygen bonds. These alterations may be due to laccase activity. Furthermore, we observed the degradation of the dye found in these bags as well as mushroom formation. Thus, P. ostreatus degrades oxo-biodegradable plastics and produces mushrooms using this plastic as substrate.     

聚乙烯塑料的微生物降解

聚乙烯(polyethylene,PE)是产量最大的通用塑料之一,通常被加工成一次性包装材料(包括塑料袋及容器)和农用薄膜等。PE塑料的广泛应用导致大量PE废弃物的累积,对生态环境造成严重的威胁。自20世纪70年代以来,一些研究陆续报道了PE塑料被微生物降解的现象,并从土壤、海洋、垃圾堆置点及昆虫肠道等生境中分离筛选到了若干种具有一定PE塑料降解能力的菌株,而且发现一些单加氧酶、过氧化物酶和漆酶等氧化还原酶对PE塑料具有氧化降解能力。这些研究为发展PE塑料废弃物生物降解处理技术提供了一定的依据。本文总结和分析了PE塑料降解微生物的分离和筛选方法,以及已报道的PE塑料降解微生物和降解酶的研究进展,以期为进一步研究PE塑料的微生物降解机理和处理技术提供参考。     

餐厨废弃物资源化利用的微生物技术研究进展

简单介绍餐厨废弃物的特征和危害,综述微生物技术处理餐厨废弃物资源化的途径,如发酵提取生物降解塑料技术、厌氧发酵处理技术、微生物堆肥技术、微生物农药技术、微生物产电技术,介绍利用复合微生物菌剂降解餐厨废弃物的研究进展,分析这一新技术的发展趋势。     

塑料添加剂向生态环境中的释放与迁移研究进展

塑料废弃物,尤其是粒径小于5 mm的微塑料造成的环境污染问题已引起全球的普遍关注。塑料制品在生产过程中常使用多种添加剂,以提高聚合物的性能并延长其使用寿命。然而,在废弃塑料制品的回收及自然老化过程中,这些添加剂会不断释放出来,对生态环境的安全与人类的健康产生威胁。综述了近年来国内外塑料添加剂的使用情况及其向生态环境释放与迁移等方面的研究进展,具体包括常用塑料添加剂的种类、废弃物塑料回收和塑料老化过程中添加剂向生态环境中的释放与迁移及机制等。未来需要更加关注绿色塑料添加剂的研发、废弃塑料回收工艺的改进以及关于塑料添加剂的释放、在各类环境介质中的迁移转化以及在生态系统各个圈层间的相互作用方面的系统性的研究,并构建相应的迁移模型评估塑料添加剂产生的生态风险。     

Biological degradation of plastics: a comprehensive review

Lack of degradability and the closing of landfill sites as well as growing water and land pollution problems have led to concern about plastics. With the excessive use of plastics and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. Awareness of the waste problem and its impact on the environment has awakened new interest in the area of degradable polymers. The interest in environmental issues is growing and there are increasing demands to develop material which do not burden the environment significantly. Biodegradation is necessary for water-soluble or water-immiscible polymers because they eventually enter streams which can neither be recycled nor incinerated. It is important to consider the microbial degradation of natural and synthetic polymers in order to understand what is necessary for biodegradation and the mechanisms involved. This requires understanding of the interactions between materials and microorganisms and the biochemical changes involved. Widespread studies on the biodegradation of plastics have been carried out in order to overcome the environmental problems associated with synthetic plastic waste. This paper reviews the current research on the biodegradation of biodegradable and also the conventional synthetic plastics and also use of various techniques for the analysis of degradation in vitro.     

A review of plastic waste biodegradation

With more and more plastics being employed in human lives and increasing pressure being placed on capacities available for plastic waste disposal, the need for biodegradable plastics and biodegradation of plastic wastes has assumed increasing importance in the last few years. This review looks at the technological advancement made in the development of more easily biodegradable plastics and the biodegradation of conventional plastics by microorganisms. Additives, such as pro-oxidants and starch, are applied in synthetic materials to modify and make plastics biodegradable. Recent research has shown that thermoplastics derived from polyolefins, traditionally considered resistant to biodegradation in ambient environment, are biodegraded following photo-degradation and chemical degradation. Thermoset plastics, such as aliphatic polyester and polyester polyurethane, are easily attacked by microorganisms directly because of the potential hydrolytic cleavage of ester or urethane bonds in their structures. Some microorganisms have been isolated to utilize polyurethane as a sole source of carbon and nitrogen source. Aliphatic-aromatic copolyesters have active commercial applications because of their good mechanical properties and biodegradability. Reviewing published and ongoing studies on plastic biodegradation, this paper attempts to make conclusions on potentially viable methods to reduce impacts of plastic waste on the environment.     

Plastic value chain and performance metric framework for optimal recycling

Despite the promotion of plastic recycling to sustainably manage plastic waste and advance the circular economy, existing plastic recycling systems globally are largely experiencing low performance and growth. To transition to world-class plastic material recycling and circularity, defining the metrics that impact the performance of a plastic recycling system is crucial. Bringing together existing literature, this study developed a conceptual framework, comprised of eight key performance metrics, for benchmarking recycling success or assessing the degree to which the performance of any plastic recycling system is optimal. Through a value chain approach, the specific performance metrics relevant to each stage of the plastic recycling system, their objectives, and the actors characterizing the system were analyzed in detail. Also, specific maturity models were developed to measure the performance of any plastic recycling system. This framework provides essential knowledge for related stakeholders to inform further development of plastic recycling and a circular economy.     

生物降解聚烯烃类塑料研究进展

聚烯烃类塑料是一类以C–C键为骨架的高分子材料,被广泛应用于日常生活的各个领域。由于具有稳定的化学性质并且难以被环境中的微生物快速降解,聚烯烃塑料废弃物在全球范围内持续积累,造成了严重的环境污染及生态危机。近年来,利用生物方法降解聚烯烃类塑料引起了研究人员的广泛关注。自然界丰富的微生物资源为生物降解聚烯烃类塑料废弃物提供了可能,已经有一些对聚烯烃塑料具有降解能力的微生物被陆续报道。本文总结了聚烯烃类塑料生物降解资源及生物降解机制的研究进展,提出了目前聚烯烃类塑料生物降解过程存在的问题,并对未来的研究方向进行了展望。     

Life cycle cost analysis of distributed versus centralized plastic sorting and recycling

Miniaturizing plastic recycling through distributed systems has been viewed as a way to manage waste closer to the source while minimizing logistics requirements. The environmental performance of distributed manufacturing and waste management systems has been evaluated, but few studies have measured the financial performance. This study combines life cycle costing and hybrid simulation modeling to compare the net present value of small-scale distributed versus large-scale centralized systems of sorting and recycling plastic bottles and takeaway containers disposed in Singapore over 7 years. The results showed that distributed systems face a net financial loss at existing prices of SGD80–120/tonne recycled pellets. This is because of the high operation costs, particularly the labor costs due to the reliance on manual sorting. Despite being closer to the waste sources, distributed scenarios have higher fuel costs due to the poorer fuel efficiency of commercial vans compared to the larger trucks in the centralized scenarios. To improve the financial performance of distributed small-scale plastic recycling systems, it is generally recommended that small-scale sorting facilities reduce the reliance on manual labor; the smaller trucks should have higher fuel economies than conventional large waste hauling trucks; the number of small-scale facilities set up should match the amount of waste to be converted; and the price of the recycled pellets should be high enough to recover the high operating costs of recycling. The findings of this study provide motivation for future research in evaluating the financial performance of distributed recycling of other waste streams. This article met the requirements for a gold-gold data badge JIE data openness badge described at http://jie.click/badges