Valorisation of chicken feathers for xanthan gum production using Xanthomonas campestris MO-03

Xanthan gum is an important commercial polysaccharide produced by Xanthomonas species. In this study, xanthan production was investigated using a local isolate of Xanthomonas campestris MO-03 in medium containing various concentrations of chicken feather peptone (CFP) as an enhancer substrate. CFP was produced with a chemical process and its chemical composition was determined. The addition of CFP (1–8?g/l) increased the conversion of sugar to xanthan gum in comparison with the control medium, which did not contain additional supplements. The highest xanthan production (24.45?g/l) was found at the 6?g/l CFP containing control medium in 54?h. This value was 1.73 fold higher than that of control medium (14.12?g/l). Moreover, addition of CFP improved the composition of xanthan gum; the pyruvate content of xanthan was 3.86% (w/w), higher than that of the control (2.2%, w/w). The xanthan gum yield was also influenced by the type of organic nitrogen sources. As a conclusion, CFP was found to be a suitable substrate for xanthan gum production.     

Xanthan production by Xanthomonas campestris using whey permeate medium

Xanthan gum is a polysaccharide that is widely used as stabilizer and thickener with many industrial applications in food industry. Our aim was to estimate the ability of Xanthomonas campestris ATCC 13951 for the production of xanthan gum by using whey as a growth medium, a by-product of dairy industry. X. campestris ATCC 13951 has been studied in batch cultures using a complex medium for the determination of the optimal concentration of glucose, galactose and lactose. In addition, whey was used under various treatment procedures (de-proteinated, partially hydrolyzed by β-lactamase and partially hydrolyzed and de-proteinated) as culture medium, to study the production of xanthan in a 2 l bioreactor with constant stirring and aeration. A production of 28 g/l was obtained when partially hydrolysed β-lactamase was used, which proved to be one of the highest xanthan gum production reported so far. At the same time, an effort has been made for the control and selection of the most appropriate procedure for the preservation of the strain and its use as inoculant in batch cultures, without loss of its viability and its capability of xanthan gum production. The pre-treatment of whey (whey permeate medium hydrolyzed, WPH) was very important for the production of xanthan by the strain X. campestris ATCC 13951 during batch culture conditions in a 2 l bioreactor. Preservation methods such as lyophilization, cryopreservation at various glycerol solution and temperatures have been examined. The results indicated that the best preservation method for the producing strain X. campestris ATCC 13951 was the lyophilization. Taking into account that whey permeate is a low cost by-product of the dairy industry, the production of xanthan achieved under the studied conditions was considered very promising for industrial application.     

Potential application of a low-viscosity and high-transparency xanthan gum produced from Xanthomonas campestris CCTCC M2015714 in foods

Xanthan gum is commonly used as a thickener in food industry, while the usage of xanthan gum as a dietary fiber is restricted for its low additive volume. Herein, the potential use of a low-viscosity and high-transparency xanthan gum as a dietary fiber was evaluated in vitro. This new xanthan shows better transparency and faster dissolution rate than most commercial products, and its viscosity increases along with the treatment of freeze–thaw cycles at ?20°C. Moreover, this new xanthan can absorb heavy metals (Pb, Cd, Cu) and retard starch digestion by glucoamylase. In summary, this new xanthan could be potentially used as a dietary fiber or fiber ingredient for preventing and treating diabetes, hyperlipemia, heavy metal poisoning, and cardiovascular diseases effectively.     

Xanthan gum biosynthesis and application: a biochemical /genetic perspective

Xanthan gum is a complex exopolysaccharide produced by the plant-pathogenic bacterium Xanthomonas campestris pv. campestris. It consists of D-glucosyl, D-mannosyl, and D-glucuronyl acid residues in a molar ratio of 2:2:1 and variable proportions of O-acetyl and pyruvyl residues. Because of its physical properties, it is widely used as a thickener or viscosifier in both food and non-food industries. Xanthan gum is also used as a stabilizer for a wide variety of suspensions, emulsions, and foams. This article outlines aspects of the biochemical assembly and genetic loci involved in its biosynthesis, including the synthesis of the sugar nucleotide substrates, the building and decoration of the pentasaccharide subunit, and the polymerization and secretion of the polymer. An overview of the applications and industrial production of xanthan is also covered. Received: 18 March 1998 / Received revision: 29 April 1998 / Accepted: 30 April 1998     

Studies on xanthan production from Xanthomonas campestris

Xanthan is an heteropolysaccharide produced by Xanthomonascampestris. Xanthan gum fermentation by a local isolate of X. campestris using different carbon sources was studied. The production of polysaccharide was influenced by the carbon source used. The production of the xanthan was 15.654 g/l with synthetic medium. Production of xanthan at various temperatures ranging between 25v°C and 40v°C was studied. The growth and production was maximum between 25-30v°C. Xanthan production was maximum at pH 7.0-7.5.     

High production of xanthan gum by a glycerol-tolerant strain Xanthomonas campestris WXLB-006

The superior properties of xanthan gum make it an industrial aginomoto used in many industries, especially in oil recovery. In the present work, xanthan production from glycerol by a mutant strain Xanthomonas campestris WXLB-006 reached as high as 17.8?g/L in flask culture. With the adoption of pH control, varied aeration and agitation, and varied glycerol feeding strategy, xanthan production reached 33.9?g/L in a 7-L fermenter and fermentation time decreased to 60?hr. Instead of difficultly and costly purifying glycerol, this research provides a very good case for glycerol utilization. At the same time, this is the first report on a high glycerol-tolerant strain for microbial polysaccharide production and 33.9?g/L is the highest production of xanthan gum produced from glycerol so far.     

Synthetic media for production of quality xanthan gum in 20 liter fermentors

Xanthan gum is a heteropolysaccharide synthesized by Xanthomonas campestris NRRL B-1459 and is composed of D -glucose, D -mannose, and D -glucuronic acid, in addition to acetic and pyruvic acids. Different amounts of pyruvic acid ketal are found in various preparations which can influence the viscosities of dilute xanthan solutions. Polysaccharide production on synthetic media was studied in small-scale fermentors. Fermentation conditions were established for production of both high and low pyruvic acid gums (about 4 and 2% pyruvic acid, respectively). Low nitrogen [0.1% (NH₄)₂HPO₄] and air (0.25 vol/liter/min) levels favor production of low pyruvate gum; increasing (NH₄)₂HPO₄ to 0.15%, adding K₂HPO₄, and increasing the air flow to 1.5 vol/liter/min favored production of normal gum. Both processes gave xanthan yields of 50 to 60%, based on 2.5% initial D -glucose substrate, in two to three days. Differences in pyruvic acid content and in the quantity of gum produced under a given set of conditions were attributed to strain variability. Substrains were isolated that have desirable characteristics for production of xanthan gum; i.e., the ability to give good yields of high-pyruvate gum when grown on both complex and synthetic media.     

黄原胶(Xanthan Gum)的特性、生产及应用

黄原胶是野油菜黄单孢菌分泌于胞外的中性水溶性多糖。由于其独特的流变性质而有着极其广泛的工业应用。介绍了黄原胶的生产、特性、降解以及应用,并对其应用潜力作了预测。     

Water-soluble polymers in agriculture: xanthan gum as eco-friendly alternative to synthetics

Water-soluble polymers (WSPs) are a versatile group of chemicals used across industries for different purposes such as thickening, stabilizing, adhesion and gelation. Synthetic polymers have tailored characteristics and are chemically homogeneous, whereas plant-derived biopolymers vary more widely in their specifications and are chemically heterogeneous. Between both sources, microbial polysaccharides are an advantageous compromise. They combine naturalness with defined material properties, precisely controlled by optimizing strain selection, fermentation operational parameters and downstream processes. The relevance of such bio-based and biodegradable materials is rising due to increasing environmental awareness of consumers and a tightening regulatory framework, causing both solid and water-soluble synthetic polymers, also termed ‘microplastics’, to have come under scrutiny. Xanthan gum is the most important microbial polysaccharide in terms of production volume and diversity of applications, and available as different grades with specific properties. In this review, we will focus on the applicability of xanthan gum in agriculture (drift control, encapsulation and soil improvement), considering its potential to replace traditionally used synthetic WSPs. As a spray adjuvant, xanthan gum prevents the formation of driftable fine droplets and shows particular resistance to mechanical shear. Xanthan gum as a component in encapsulated formulations modifies release properties or provides additional protection to encapsulated agents. In geotechnical engineering, soil amended with xanthan gum has proven to increase water retention, reduce water evaporation, percolation and soil erosion – topics of high relevance in the agriculture of the 21st century. Finally, hands-on formulation tips are provided to facilitate exploiting the full potential of xanthan gum in diverse agricultural applications and thus providing sustainable solutions.     

Xanthan gum: production, recovery, and properties

Xanthan gum is a microbial polysaccharide of great commercial significance. This review focuses on various aspects of xanthan production, including the producing organism Xanthomonas campestris, the kinetics of growth and production, the downstream recovery of the polysaccharide, and the solution properties of xanthan.     

Continuous fermentation to produce xanthan biopolymer: Laboratory investigation

Xanthan biopolymer has been produced by single-stage continuous fermentation with Xanthomonas campestris NRRL B-1459 in a medium of glucose, minerals, distillers' solubles, and urea for as long as 20 days. At the highest dilution rate studied (D = 0.0285 hr^?1), the steady state rate of xanthan production was 0.36 g/kg/hr and the steady state yield, basis glucose consumed, was 68%. Observations indicate that xanthan production rate is a function of pH and D.     

Xanthan gum production under several operational conditions: molecular structure and rheological properties*

Xanthan gum production under several operational conditions has been studied. Temperature, initial nitrogen concentration and oxygen mass transfer rate have been changed and average molecular weight, pyruvilation and acetylation degree of xanthan produced have been measured in order to know the influence of these variables on the synthesised xanthan molecular structure. Also, xanthan gum solution viscosity has been measured, and rheological properties of the solutions have been related to molecular structure and operational conditions. The Casson model has been employed to describe the rheological behaviour. The parameter values of the Casson model, tau(0) and K(c), have been obtained for each polysaccharide synthesised under different operational conditions. Both pyruvilation and acetylation degrees and average molecular weight of xanthan increase with fermentation time at any operating conditions. Xanthan molecules with the highest average molecular weight have been obtained at 25 degrees C. Nevertheless, at this temperature acetate and pyruvate radical concentration are lowest. Nitrogen concentration in broth does not show any clear influence over xanthan average molecular weight, although with high nitrogen source concentration xanthan with low pyruvilation degree is produced.     

pH-Dependent interaction between sodium caseinate and xanthan gum

Xanthan gum and sodium caseinate are used to improve stability and texture of food. To investigate interactions between them, the effects of pH on structure of sodium caseinate–xanthan gum complex were analyzed. HCl titration showed that the absorbance of the mixture was different from that of sodium caseinate alone throughout the acidification, and that syneresis in the mixture was delayed in acidic pH. Rennet digestion clarified that xanthan gum retarded degradation of κ-casein at pH 2.7. Atomic force microscopy revealed that xanthan gum interaction with sodium caseinate was pH-dependent. Sodium caseinate particles were individually bound with xanthan gum at pH 6.6, and a side-by-side aggregation of sodium caseinate along xanthan gum was observed at pH 4.2. The mixture formed a network composed of rod-like fibers at pH 2.7. These results indicate that hydrophobic and electrostatic interactions play a role in the complex formation at neutral and acidic pH, respectively.     

Improved shake-flask test for the screening of xanthan-producing microorganisms

Baffled 500 ml Erlenmeyer flasks were compared with conventional 2800 ml Fernbach flasks forXanthomonas campestris to produce xanthan. Bacterial growth rates were similar in both types of flask although the Fernbach flasks gave higher biomass concentrations. Xanthan production was similar in both types of flasks but different viscosities were attained. On a weight basis, the xanthan produced in baffled flasks was up to three times more viscous and more pseudoplastic or shear thinning. For screening purposes, baffled flasks are better because the rheological quality of the gum produced in them is more like that obtained in stirred fermentors than the gum from Fernbach flasks and considerably less shaker space is required, thus allowing a larger number of tests to be performed.     

Xanthan gum: an economical substitute for agar in plant tissue culture media

Xanthan gum, a microbial desiccation-resistant polysaccharide prepared commercially by aerobic submerged fermentation from Xanthomonas campestris, has been successfully used as a solidifying agent for plant tissue culture media. Its suitability as a substitute to agar was demonstrated for in vitro seed germination, caulogenesis and rhizogenesis of Albizzia lebbeck, androgenesis in anther cultures of Datura innoxia, and somatic embryogenesis in callus cultures of Calliandra tweedii. Culture media used for eliciting these morphogenic responses were gelled with either 1% xanthan gum or 0.9% agar. Xanthan gum, like agar, supported all these responses.     

Glutamate transport and xanthan gum production in the plant pathogen Xanthomonas axonopodis pv. citri

l-glutamate plays a central role in nitrogen metabolism in all living organisms. In the genus Xanthomonas, the nitrogen nutrition is an important factor involved in the xanthan gum production, an important exopolysaccharide with various industrial and biotechnological applications. In this report, we demonstrate that the use of l-glutamate by the phytopathogen Xanthomonas axonopodis pv. citri as a nitrogen source in defined medium significantly increases the production of xanthan gum. This increase is dependent on the l-glutamate concentration. In addition, we have also characterized a glutamate transport system that is dependent on a proton gradient and on ATP and is modulated by amino acids that are structurally related to glutamate. This is the first biochemical characterization of an energy substrate transport system observed in a bacterial phytopathogen with a broad economic and industrial impact due to xanthan gum production.     

改性黄原胶酯化条件的优化及结构的表征

为了提高黄原胶的速溶性和粘度,将黄原胶进行改性处理。将黄原胶与马来酸酐进行酯化反应,探讨了黄原胶与马来酸酐摩尔比、反应时间和反应温度等因素的影响,以取代度为指标,利用响应面方法确定,该酯化反应的最优条件为:黄原胶与马来酸酐摩尔比1∶11.5、反应时间24.4 h、反应温度66℃。对改性黄原胶进行红外光谱、光散射和X-射线衍射等结构表征,表明酯化改性成功,且进一步解释了速溶性和粘度提高的原因。改性黄原胶细胞毒性实验,显示无毒性。结果表明,改性黄原胶的速溶性和粘度有很大提高,0.2%改性黄原胶的速溶性和粘度较对照提高了近3倍,在食品、药品等领域具有潜在的应用价值。     

Lactose consuming strains of Xanthomonas citri subsp. citri (Xcc) insight into the emergence of natural field resources for xanthan gum production

Xanthomonas genus possesses a low level of β-galactosidase gene expression and is therefore unable to produce xanthan gum in lactose-based media. In this study, we report the emergence of some natural field strains of Xanthomonas citri subsp. citri (Xcc) capable to use lactose as a sole carbon source to produce xanthan gum. From 210 Xcc strains isolated from key lime (C. aurantifolia), 27 showed the capacity to grow on lactose containing medium. Xcc lactose consuming strains demonstrated a good level of xanthan production. Amongst all, NIGEBK37 produced the greatest (14.62 g/l) amount of xanthan gum in experimental laboratory conditions. By evaluating the viscosity of the biopolymer at 25 °C, it was demonstrated that xanthan synthesized by strain NIGEBK37 has the highest viscosity (44,170.66 cP). Our results were indicative for the weakness of a commercial strain of Xanthomonas campestris pv. Campestris DSM1706 (Xcc/DSM1706) to produce xanthan in lactose containing medium.     

Continuous fermentation to produce xanthan biopolymer: Effect of dilution rate

Single-stage continuous fermentations to produce xanthan gum have been run at dilution rates (D) from 0.023 to 0.196 hr^?1. Xanthan production rate (XPR) was a function of D. XPR increased from 0.34 g/hr/kg at D = 0.023 hr^?1 to the maximum 0.84 g/hr/kg at D = ca. 0.15 hr^?1. At D > 0.15 hr^?1 XPR decreased and at the highest D studied (0.196 hr^?1) was 0.69 g/hr/kg. Yield of xanthan from glucose consumed was 81–89%. Steady states ended between 6.5 and 8.7 turnovers when a variant strain occurred.     

Genetic engineering of polysaccharide structure: production of variants of xanthan gum in Xanthomonas campestris.

Xanthan gum is an extracellular heteropolysaccharide produced by the bacterium Xanthomonas campestris. Xanthan has wide commercial application as a viscosifier of aqueous solutions. Previously, through genetic engineering, a set of mutants defective in the xanthan biosynthetic pathway has been obtained. Certain mutants were shown to synthesize and polymerize structural variants of the xanthan repeating unit and thus produce "variant xanthans". Initial studies of solution viscosities of these polymers, presented here, indicate that the variants have rheological properties similar to, but not identical with, xanthan. These results indicate that acetylation and pyruvylation can affect the viscometric properties of xanthan. Specifically, the presence of pyruvate increases viscosity, whereas acetate decreases viscosity. In addition, the elimination of sugar residues from xanthan side chains also has a major effect on viscosity. Compared to wild-type xanthan, polymer lacking the terminal mannose (polytetramer) is a poor viscosifier. In contrast, polymer lacking both the terminal mannose and glucuronic acid (polytrimer) is a superior viscosifier, on a weight basis. There is a negative effect of acetylation on the viscosity of polytetramer xanthan, but there is seemingly no effect of acetylation on polytrimer xanthan viscosity. The further study of these materials should provide insight into the relationship between xanthan structure and rheological behavior.