Optimization of elastin‐like polypeptide fusions for expression and purification of recombinant proteins in plants

The demand for recombinant proteins for medical and industrial use is expanding rapidly and plants are now recognized as an efficient, inexpensive means of production. Although the accumulation of recombinant proteins in transgenic plants can be low, we have previously demonstrated that fusions with an elastin‐like polypeptide (ELP) tag can significantly enhance the production yield of a range of different recombinant proteins in plant leaves. ELPs are biopolymers with a repeating pentapeptide sequence (VGVPG)_n that are valuable for bioseparation, acting as thermally responsive tags for the non‐chromatographic purification of recombinant proteins. To determine the optimal ELP size for the accumulation of recombinant proteins and their subsequent purification, various ELP tags were fused to green fluorescent protein, interleukin‐10, erythropoietin and a single chain antibody fragment and then transiently expressed in tobacco leaves. Our results indicated that ELP tags with 30 pentapeptide repeats provided the best compromise between the positive effects of small ELP tags (n = 5–40) on recombinant protein accumulation and the beneficial effects of larger ELP tags (n = 80–160) on recombinant protein recovery during inverse transition cycling (ITC) purification. In addition, the C‐terminal orientation of ELP fusion tags produced higher levels of target proteins, relative to N‐terminal ELP fusions. Importantly, the ELP tags had no adverse effect on the receptor binding affinity of erythropoietin, demonstrating the inert nature of these tags. The use of ELP fusion tags provides an approach for enhancing the production of recombinant proteins in plants, while simultaneously assisting in their purification. Biotechnol. Bioeng. 2009;103: 562–573. © 2009 Wiley Periodicals, Inc.     

Fusion order controls expression level and activity of elastin‐like polypeptide fusion proteins

We have previously developed a method to purify recombinant proteins, termed inverse transition cycling (ITC) that eliminates the need for column chromatography. ITC exploits the inverse solubility phase transition of an elastin‐like polypeptide (ELP) that is fused to a protein of interest. In ITC, a recombinant ELP fusion protein is cycled through its phase transition, resulting in separation of the ELP fusion protein from other Escherichia coli contaminants. Herein, we examine the role of the position of the ELP in the fusion protein on the expression levels and yields of purified protein for four recombinant ELP fusion proteins. Placing the ELP at the C‐terminus of the target protein (protein‐ELP) results in a higher expression level for the four ELP fusion proteins, which also translates to a greater yield of purified protein. The position of the fusion protein also has a significant impact on its specific activity, as ELP‐protein constructs have a lower specific activity than protein‐ELP constructs for three out of the four proteins. Our results show no difference in mRNA levels between protein‐ELP and ELP‐protein fusion constructs. Instead, we suggest two possible explanations for these results: first, the translational efficiency of mRNA may differ between the fusion protein in the two orientations and second, the lower level of protein expression and lower specific activity is consistent with a scenario that placement of the ELP at the N‐terminus of the fusion protein increases the fraction of misfolded, and less active conformers, which are also preferentially degraded compared to fusion proteins in which the ELP is present at the C‐terminal end of the protein.     

Improved non-chromatographic purification of a recombinant protein by cationic elastin-like polypeptides

This paper reports an improvement in the purification of thioredoxin (Trx) expressed from E. coli by inverse transition cycling (ITC) using cationic elastin-like polypeptides (ELPs). Two ELP libraries having 2% and 5% lysine residues and molecular weights ranging from 4 to 61.1 kDa showed greater salt sensitivity in their inverse transition behavior than purely aliphatic ELPs. Expression yield of Trx-ELP fusions was an unpredictable function of guest residue composition, but reducing the molecular weight of the ELP tag generally increased Trx yield. A cationic 4.3 kDa ELP is the shortest ELP used to purify any protein by ITC to date. A 15.9 kDa ELP with a guest residue composition of K:V:F of 1:7:1 was found to be the optimal cationic tag to purify Trx, as it provided 50% greater Trx yield and only required one-fifth the added NaCl for purification of Trx as compared to previously used aliphatic ELP tags.     

Expression and purification of recombinant proteins from Escherichia coli: Comparison of an elastin-like polypeptide fusion with an oligohistidine fusion

Thermally responsive elastin like polypeptides (ELPs) can be used to purify proteins from Escherichia coli culture when proteins are expressed as a fusion with an ELP. Nonchromatographic purification of ELP fusion proteins, termed inverse transition cycling (ITC), exploits the reversible soluble-insoluble phase transition behavior imparted by the ELP tag. Here, we quantitatively compare the expression and purification of ELP and oligohistidine fusions of chloramphenicol acetyltransferase (CAT), blue fluorescent protein (BFP), thioredoxin (Trx), and calmodulin (CalM) from both a 4-h culture with chemical induction of the plasmid-borne fusion protein gene and a 24-h culture without chemical induction. The total protein content and functional activity were quantified at each ITC purification step. For CAT, BFP, and Trx, the 24-h noninduction culture of ELP fusion proteins results in a sevenfold increase in the yield of each fusion protein compared to that obtained by the 4-h-induced culture, and the calculated target protein yield is similar to that of their equivalent oligohistidine fusion. For these proteins, ITC purification of fusion proteins also results in approximately 75% recovery of active fusion protein, similar to affinity chromatography. Compared to chromatographic purification, however, ITC is inexpensive, requires no specialized equipment or reagents, and because ITC is a batch purification process, it is easily scaled up to accommodate larger culture volumes or scaled down and multiplexed for high-throughput, microscale purification; thus, potentially impacting both high-throughput protein expression and purification for proteomics and large scale, cost-effective industrial bioprocessing of pharmaceutically relevant proteins.     

Effect of detergents on the thermal behavior of elastin‐like polypeptides

Elastin‐like polypeptide (ELP) fusions have been designed to allow large‐scale, nonchromatographic purification of many soluble proteins by using the inverse transition cycling (ITC) method; however, the sensitivity of the aqueous lower critical solubility phase transition temperature (T_t) of ELPs to the addition of cosolutes, including detergents, may be a potential hindrance in purification of proteins with surface hydrophobicity in such a manner. To identify detergents that are known to solubilize such proteins (e.g., membrane proteins) and that have little effect on the T_t of the ELP, we screened a number of detergents with respect to their effects on the T_t and secondary structures of a model ELP (denoted here as ELP180). We found that mild detergents (e.g., n‐dodecyl‐β‐D ‐maltoside, Triton‐X100, and 3‐[(3‐cholamidopropyl) dimethylamino]‐1‐propanesulfonate) do not alter the phase transition behavior or structure (as probed by circular dichroism) of ELP180. This result is in contrast to previous studies that showed a strong effect of other detergents (e.g., sodium dodecylsulfate) on the T_t of ELPs. Our results clearly indicate that mild detergents do not preclude ITC‐based separation of ELPs, and thus that ELP fusions may prove to be useful in the purification of detergent‐solubilized recombinant hydrophobic proteins, including membrane proteins, which are otherwise notoriously difficult to extract and purify by conventional separation methods (e.g., chromatography). © 2012 Wiley Periodicals, Inc.     

黄鳍金枪鱼抗菌肽YFGAP在大肠杆菌中融合表达及其活性检测

【目的】抗菌肽YFGAP由32个氨基酸组成,分子量为3.4 kD,对革兰氏阳性菌(G+)和革兰氏阴性菌(G?)表现出强效的抑制作用,不具有溶血活性。在大肠杆菌中表达抗菌肽YFGAP,分离纯化抗菌肽并鉴定其生物学活性。【方法】化学合成EK-YFGAP和L-EK-YFGAP基因序列,构建表达载体pET22b-ELP20-EK-YFGAP、pET22b-ELP40-EK-YFGAP和pET22b-ELP40-L-EK- YFGAP,分别转化至大肠杆菌BL21(DE3)中诱导表达,可逆相变循环纯化融合蛋白。肠激酶酶切,经Vivaspin Turbo纯化柱纯化,测定重组抗菌肽的抑菌活性和溶血活性。【结果】纯化出两种融合蛋白ELP40-EK-YFGAP和ELP40-L-EK-YFGAP,肠激酶酶切纯化后获得重组抗菌肽YFGAP,对4种病原菌均有抑制效果,溶血活性较低。【结论】以ELPs作为非色谱纯化标签,实现了抗菌肽YFGAP的融合表达,具有操作简单、成本低、易于扩大的优势,为重组抗菌肽的量化制备及应用提供了理论基础和技术支持。     

Thermal behaviors of elastin-like polypeptides (ELPs) according to their physical properties and environmental conditions

Elastin-like polypeptides (ELPs) have a distinctive thermal property, transition temperature (T_t), which leads to phase transition. This thermal property depends on the molecular weight (MW) of ELP, ELP concentration, composition of the amino acids constituting ELPs, and ionic strength of the aqueous solution. In order to investigate the effects of ELP length, ionic strength and existence of fusion protein, ELP genes of three different sizes were cloned using the recursive directional ligation (RDL) method and expressed in Escherichia coli. Following purification, thermal behaviors of ELPs were monitored using a spectrophotometer with temperature scanning. The results of our study indicated that T_t shifted to low in accordance with ELP length or increased ionic strength. Additionally, it was observed that T_t was affected by the physical properties of the protein fused with ELPs.     

Elastin‐like polypeptide switches: A design strategy to detect multimeric proteins

Elastin‐Like Polypeptides (ELPs) reversibly phase separate in response to changes in temperature, pressure, concentration, pH, and ionic species. While powerful triggers, biological microenvironments present a multitude of more specific biological cues, such as antibodies, cytokines, and cell‐surface receptors. To develop better biosensors and bioresponsive drug carriers, rational strategies are required to sense and respond to these target proteins. We recently reported that noncovalent association of two ELP fusion proteins to a “chemical inducer of dimerization” small molecule (1.5 kDa) induces phase separation at physiological temperatures. Having detected a small molecule, here we present the first evidence that ELP multimerization can also detect a much larger (60 kDa) protein target. To demonstrate this strategy, ELPs were biotinylated at their amino terminus and mixed with tetrameric streptavidin. At a stoichiometric ratio of [4:1], two to three biotin‐ELPs associate with streptavidin into multimeric complexes with an apparent K_d of 5 nM. The increased ELP density around a streptavidin core strongly promotes isothermal phase separation, which was tuned to occur at physiological temperature. This phase separation reverses upon saturation with excess streptavidin, which only favors [1:1] complexes. Together, these findings suggest that ELP association with multimeric biomolecules is a viable strategy to deliberately engineer ELPs that respond to multimeric protein substrates.     

快速纯化重组腺联病毒的受体结合捕捉方法

【目的】建立用于重组腺联病毒(AAV)纯化的受体结合捕捉方法。【方法】将AAV受体的多囊肾病(PKD)结构域1和2与类弹性蛋白多肽(ELP)在重组大肠杆菌中进行融合表达,利用相变循环(ITC)纯化ELP-PKD融合蛋白;分别用昆虫和AAV-293细胞制备rAAV-GFP,与ELP-PKD融合蛋白共孵育后进行ITC,从沉淀复合物提取病毒DNA进行PCR检测;在优化条件下利用ELP-PKD蛋白结合捕捉rAAV-GFP,利用电子显微镜观察、免疫转印和细胞感染试验进行rAAV鉴定。【结果】ELP-PKD融合蛋白获得正确、可溶性表达,ITC纯化的蛋白纯度大于90%;ELP-PKD蛋白能特异结合rAAV-GFP,结合具有p H、温度和时间依赖性,受体结合捕捉方法可在1h内完成,从两种细胞纯化rAAV-GFP的回收率分别为58%和56%;rAAV-GFP洗脱具有p H和温度依赖性,洗脱rAAV-GFP的回收率分别为46%和44%;纯化rAAV-GFP具有AAV的典型形态和结构蛋白。【结论】建立的ELP-PKD结合捕捉法可用于不同细胞源rAAV的快速纯化。     

Elastin-like polypeptides as a promising family of genetically-engineered protein based polymers

Elastin-like polypeptides (ELP) are artificial, genetically encodable biopolymers, belonging to elastomeric proteins, which are widespread in a wide range of living organisms. They are composed of a repeating pentapeptide sequence Val–Pro–Gly–Xaa–Gly, where the guest residue (Xaa) can be any naturally occurring amino acid except proline. These polymers undergo reversible phase transition that can be triggered by various environmental stimuli, such as temperature, pH or ionic strength. This behavior depends greatly on the molecular weight, concentration of ELP in the solution and composition of the amino acids constituting ELPs. At a temperature below the inverse transition temperature (T_t), ELPs are soluble, but insoluble when the temperature exceeds T_t. Furthermore, this feature is retained even when ELP is fused to the protein of interest. These unique properties make ELP very useful for a wide variety of biomedical applications (e.g. protein purification, drug delivery etc.) and it can be expected that smart biopolymers will play a significant role in the development of most new materials and technologies. Here we present the structure and properties of thermally responsive elastin-like polypeptides with a particular emphasis on biomedical and biotechnological application.     

Protein purification by fusion with an environmentally responsive elastin-like polypeptide: effect of polypeptide length on the purification of thioredoxin

Elastin-like polypeptides (ELPs) undergo a reversible, soluble-to-insoluble phase transition in aqueous solution upon heating through a characteristic transition temperature (T(t)). Incorporating a terminal ELP expression tag into the gene of a protein of interest allows ELP fusion proteins to be purified from cell lysate by cycles of environmentally triggered aggregation, separation from solution by centrifugation, and resolubilization in buffer. In this study, we examine the effect of ELP length on the expression and purification of a thioredoxin-ELP fusion protein and show that reducing the size of the ELP tag from 36 to 9 kDa increases the expression yield of thioredoxin by 4-fold, to a level comparable to that of free thioredoxin expressed without an ELP tag, while still allowing efficient purification. However, truncation of the ELP tag also results in a more complex transition behavior than is observed with larger tags. For both the 36 kDa and the 9 kDa ELP tag fused to thioredoxin, dynamic light scattering showed that large aggregates with hydrodynamic radii of approximately 2 microm form as the temperature is raised to above the T(t). These aggregates persist at all temperatures above the T(t) for the thioredoxin fusion with the 36 kDa ELP tag. With the 9 kDa tag, however, smaller particles with hydrodynamic radii of approximately 12 nm begin to form at the expense of the larger, micron-size aggregates as the temperature is further raised above the T(t). Because only large aggregates can be effectively retrieved by centrifugation, efficient purification of fusion proteins with short ELP tags requires selection of solution conditions that favor the formation of the micron-size aggregates. Despite this additional complexity, our results show that the ELP tag can be successfully truncated to enhance the yield of a target protein without compromising its purification.     

Development of the efficient preparation method for thermoresponsive elastin-like peptides using liquid-phase synthesis combined with fragment condensation strategy

Elastin-like peptides (ELPs) are synthetic peptides that mimic the characteristic hydrophobic amino acid repeat sequences of elastin and exhibit temperature-dependent reversible self-assembly properties. ELPs are expected to be used as temperature-responsive biomolecular materials across diverse industrial and research fields, and there is a requirement for a straightforward method to mass-produce them. Previously, we demonstrated that phenylalanine-containing ELP analogs, namely, (FPGVG)_n, can undergo coacervation with short chains (n = 5). The Fmoc solid-phase peptide synthesis method is one strategy used to synthesize these short ELPs. However, owing to its low reaction efficiency, an efficient method for preparing ELPs is required. In this study, efficient preparation of ELPs was investigated using a liquid-phase synthesis method with a hydrophobic benzyl alcohol support (HBA-tag). Because HBA-tags are highly hydrophobic, they can be easily precipitated by the addition of poor solvents and recovered by filtration. This property allows the method to combine the advantages of the simplicity of solid-phase methods and the high reaction efficiency of liquid-phase methods. By utilizing liquid-phase fragment condensation with HBA-tags, short ELPs were successfully obtained in high yield and purity. Finally, the temperature-dependent response of the ELPs generated through fragment condensation was assessed using turbidity measurements, which revealed a reversible phase transition. Consequently, the ELPs exhibited a reversible phase transition, indicating successful synthesis of ELPs via fragment preparation with tags. These findings provide evidence of the potential for mass production of ELPs using this approach.     

Branched short elastin-like peptides with temperature responsiveness obtained by EDTA-mediated multimerization

Elastin-like peptides (ELPs) exhibit a reversible phase transition, known as coacervation, triggered by temperature changes. This property makes them useful as stimuli-responsive molecular materials for various applications. Among ELPs, short peptide chain lengths have some advantages over long peptide chain lengths because short ELPs can be easily obtained by chemical synthesis, allowing the use of various amino acids, including D-type and unnatural amino acids, at any position in the sequence. Moreover, the incorporated amino acids readily affect the temperature-responsive behavior of ELPs. However, to be utilized in various applications, it is necessary to develop short ELPs and to investigate their temperature-responsive properties. To obtain further insights into the temperature-responsive behavior of the short ELPs, we investigated branched short ELP analogs composed of (FPGVG)_n chains (n = 1 or 2, abbreviated as F1 and F2, respectively). We synthesized multimers composed of four F1 chains or two to four F2 chains using ethylenediaminetetraacetic acid (EDTA) as a central component of multimerization. Our results show that the multimers obtained exhibited coacervation in aqueous solutions whereas linear F1 or F2 did not. Furthermore, the structural features of the obtained multimers were the same as those of linear (FPGVG)₄. In this study, we demonstrated that molecules capable of coacervation can be obtained by multimerization of F1 or F2. The temperature-responsive molecules obtained using short ELPs make it possible to use them as easy-to-synthesize peptide tags to confer temperature responsiveness to various molecules, which will aid the development of temperature-responsive biomaterials with a wide variety of functions.     

Modeling the Early Stages of Phase Separation in Disordered Elastin-like Proteins

Elastin-like proteins (ELPs) are known to undergo liquid-liquid phase separation reversibly above a concentration-dependent transition temperature. Previous studies suggested that, as temperature increases, ELPs experience an increased propensity for type II β-turns. However, how the ELPs behave below the phase transition temperature itself is still elusive. Here, we investigate the importance of β-turn formation during the early stages of ELP self-association. We examined the behavior of two ELPs, a 150-repeat construct that had been investigated previously (ELP[V₅G₃A₂-150] as well as a new 40-repeat construct (ELP40) suitable for nuclear magnetic resonance measurements. Structural analysis of ELP40 reveals a disordered conformation, and chemical shifts throughout the sequence are insensitive to changes in temperature over 20°C. However, a low population of β-turn conformation cannot be ruled out based on chemical shifts alone. To examine the structural consequences of β-turns in ELPs, a series of structural ensembles of ELP[V₅G₃A₂-150] were generated, incorporating differing amounts of β-turn bias throughout the chain. To mimic the early stages of the phase change, two monomers were paired, assuming preferential interaction at β-turn regions. This approach was justified by the observation that buried hydrophobic turns are commonly observed to interact in the Protein Data Bank. After dimerization, the ensemble-averaged hydrodynamic properties were calculated for each degree of β-turn bias, and the results were compared with analytical ultracentrifugation experiments at various temperatures. We find that the temperature dependence of the sedimentation coefficient $\left(s_{20,\text{w}}^{\text{o}}\right)$ can be reproduced by increasing the β-turn content in the structural ensemble. This analysis allows us to estimate the presence of β-turns and weak associations under experimental conditions. Because disordered proteins frequently exhibit weak biases in secondary structure propensity, these experimentally-driven ensemble calculations may complement existing methods for modeling disordered proteins generally.     

Ultra-high expression of a thermally responsive recombinant fusion protein in E. coli

Elastin-like polypeptides (ELPs) are recombinant peptide-based biopolymers that contain repetitive sequences enriched in glycine, valine, proline, and alanine. Because of the unusually large fraction of these amino acids in ELPs as compared to other cellular proteins, we hypothesized that intracellular pools of these amino acids can be selectively depleted and limit protein yields during expression. In this study, we examined how culture conditions and individual medium components affect protein yields by monitoring cell growth and protein expression kinetics of E. coli expressing an ELP tagged with a green fluorescent protein (GFP). By determining the underlying principles of superior fusion protein yields generated by the hyperexpression protocol, we further improved protein yields through the addition of glycerol and certain amino acids such as proline and alanine and found that amino acid concentrations and the type of basal medium used strongly influenced this beneficial effect. Surprisingly, amino acids other than those that are abundant in ELPs, for example, asparagine, aspartic acid, glutamine, and glutamic acid, also enhanced protein yields even in a nutrient-rich medium. Compared to commonly used Luria-Bertani medium, the protein yield was improved by 36-fold to the remarkable level of 1.6 g/L in shaker flask cultures with a modified medium and optimized culture conditions, which also led to a 8-fold reduction in the cost of the fusion protein. To our knowledge, this is the highest yield of an ELP-fusion protein purified from E. coli cultured in shaker flasks. This study also suggests a useful strategy to improve the yields of other ELP fusion proteins and repetitive polypeptides.     

The human EMAP-like protein-70 (ELP70) is a microtubule destabilizer that localizes to the mitotic apparatus.

In this report, we show that the echinoderm microtubule (MT)-associated protein (EMAP) and related EMAP-like proteins (ELPs) share a similar domain organization with a highly conserved hydrophobic ELP (HELP) domain and a large tryptophan-aspartic acid (WD) repeat domain. To determine the function of mammalian ELPs, we generated antibodies against a 70-kDa human ELP and showed that ELP70 coassembled with MTs in HeLa cell extracts and colocalized with MTs in the mitotic apparatus. To determine whether ELP70 bound to MTs directly, human ELP70 was expressed and purified to homogeneity from baculovirus-infected Sf9 cells. Purified ELP70 bound to purified MTs with a stoichiometry of 0.40 +/- 0.04 mol of ELP70/mol of tubulin dimer and with an intrinsic dissociation constant of 0.44 +/- 0.13 microm. Using a nucleated assembly assay and video-enhanced differential interference contrast microscopy, we demonstrated that ELP70 reduced seeded nucleation, reduced the growth rate, and promoted MT catastrophes in a concentration-dependent manner. As a result, ELP70-containing MTs were significantly shorter than MTs assembled from tubulin alone. These data indicate that ELP70 is a novel MT destabilizer. A lateral destabilization model is presented to describe ELP70's effects on microtubules.     

Evolution and function of eukaryotic‐like proteins from sponge symbionts

Sponges (Porifera) are ancient metazoans that harbour diverse microorganisms, whose symbiotic interactions are essential for the host's health and function. Although symbiosis between bacteria and sponges are ubiquitous, the molecular mechanisms that control these associations are largely unknown. Recent (meta‐) genomic analyses discovered an abundance of genes encoding for eukaryotic‐like proteins (ELPs) in bacterial symbionts from different sponge species. ELPs belonging to the ankyrin repeat (AR) class from a bacterial symbiont of the sponge Cymbastela concentrica were subsequently found to modulate amoebal phagocytosis. This might be a molecular mechanism, by which symbionts can control their interaction with the sponge. In this study, we investigated the evolution and function of ELPs from other classes and from symbionts found in other sponges to better understand the importance of ELPs for bacteria–eukaryote interactions. Phylogenetic analyses showed that all of the nine ELPs investigated were most closely related to proteins found either in eukaryotes or in bacteria that can live in association with eukaryotes. ELPs were then recombinantly expressed in Escherichia coli and exposed to the amoeba Acanthamoeba castellanii, which is functionally analogous to phagocytic cells in sponges. Phagocytosis assays with E. coli containing three ELP classes (AR, TPR‐SEL1 and NHL) showed a significantly higher percentage of amoeba containing bacteria and average number of intracellular bacteria per amoeba when compared to negative controls. The result that various classes of ELPs found in symbionts of different sponges can modulate phagocytosis indicates that they have a broader function in mediating bacteria–sponge interactions.     

Unexpected multivalent display of proteins by temperature triggered self-assembly of elastin-like polypeptide block copolymers

We report herein the unexpected temperature triggered self-assembly of proteins fused to thermally responsive elastin-like polypeptides (ELPs) into spherical micelles. A set of six ELP block copolymers (ELP(BC)) differing in hydrophilic and hydrophobic block lengths were genetically fused to two single domain proteins, thioredoxin (Trx) and a fibronectin type III domain (Fn3) that binds the α(v)β(3) integrin. The self-assembly of these protein-ELP(BC) fusions as a function of temperature was investigated by UV spectroscopy, light scattering, and cryo-TEM. Self-assembly of the ELP(BC) was unexpectedly retained upon fusion to the two proteins, resulting in the formation of spherical micelles with a hydrodynamic radius that ranged from 24 to 37 nm, depending on the protein and ELP(BC). Cryo-TEM images confirmed the formation of spherical particles with a size that was consistent with that measured by light scattering. The bioactivity of Fn3 was retained when presented by the ELP(BC) micelles, as indicated by the enhanced uptake of the Fn3-decorated ELP(BC) micelles in comparison to the unimer by cells that overexpress the α(v)β(3) integrin. The fusion of single domain proteins to ELP(BC)s may provide a ubiquitous platform for the multivalent presentation of proteins.     

Heterologous expression and optimized one-step separation of levansucrase via elastin-like polypeptides tagging system

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli DH5alpha at 37 degrees C for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at 20 degrees C in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature (Tt) of levansucrase-ELP[V-40] was 17 degrees C with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.