Evaluation of Anammox and denitrification during anaerobic digestion of poultry manure

Two approaches based on ne w process development and biological nitrogen transformation were investigated in a bench study for removing nitrogen as N2 gas from poultry waste while stabilizing the wastes. The process, known as "Anammox", was explored in batch anaerobic culture using serum bottles. The Anammox process involves the use of nitrite as an electron acceptor in the bacterially mediated oxidation of ammonia to yield N2. Studies are described wherein nitrite was added to poultry waste and the effects on ammonium levels were monitored. About 13-22% ammonium removal was observed with the inoculation of returned activated sludge, and the total ammonium reduction was not proportional to the reduction of nitrite, thereby suggesting that Anammox was less competitive under the conditions in our studies. The addition of nitrite and nitrate was not inhibitory to the process based on gas generation and COD reduction. The classical nitrogen removal process of nitrification followed with denitrification offers a more reliable basis for nitrogen removal from poultry wastes.     

Promoting Green Innovation or Prolonging the Existing Technology

Abstract: A case study of the chlor-alkali industry in Western Europe and Japan is presented examining the effects of environmental regulation on technological change. In Western Europe, standards were set for mercury emissions from chlor-alkali plants, which were gradually tightened subsequently. Research and development (R&D) efforts were directed to end-of-pipe technologies as well as process improvements for reducing mercury emissions, rather than to clean technologies, which eliminate mercury from within the production process. With a significant reduction in mercury emissions with end-of-pipe technologies, new plants continued to be built that relied on the mercury process. As long as these relatively new plants could be utilized, technological transition to the clean ion-exchange membrane process remained slow. The success in reducing mercury emissions with end-of-pipe technologies, in effect, helped to prolong the lifetime of the existing mercury process. In Japan, the government introduced policies to phase out the existing mercury process. The strict approach encouraged innovative companies to make R&D efforts on clean technologies, instead of end-of-pipe technologies for pollution abatement. Applied in a hasty and inflexible way, however, the stringent regulation initially induced most of the chlor-alkali producers to choose the diaphragm process, which later turned out to be inappropriate. After the regulatory schedule was modified to allow more time for process conversion, the remaining mercury-based plants were converted directly to the most efficient ion-exchange membrane process. The technological transition, however, was costly, as most of the diaphragm-based plants introduced following the regulatory mandate were operated only for a short period of time, with the large investment wasted.     

Deer antler regeneration: cells, concepts, and controversies

The periodic replacement of antlers is an exceptional regenerative process in mammals, which in general are unable to regenerate complete body appendages. Antler regeneration has traditionally been viewed as an epimorphic process closely resembling limb regeneration in urodele amphibians, and the terminology of the latter process has also been applied to antler regeneration. More recent studies, however, showed that, unlike urodele limb regeneration, antler regeneration does not involve cell dedifferentiation and the formation of a blastema from these dedifferentiated cells. Rather, these studies suggest that antler regeneration is a stem-cell-based process that depends on the periodic activation of, presumably neural-crest-derived, periosteal stem cells of the distal pedicle. The evidence for this hypothesis is reviewed and as a result, a new concept of antler regeneration as a process of stem-cell-based epimorphic regeneration is proposed that does not involve cell dedifferentiation or transdifferentiation. Antler regeneration illustrates that extensive appendage regeneration in a postnatal mammal can be achieved by a developmental process that differs in several fundamental aspects from limb regeneration in urodeles.     

Drama as a valuable learning medium in early childhood

ABSTRACT

Theater arts encompass unique art forms comprising highly developed pedagogical applications apart from theater as performance. Specifically, the use of drama as a learning medium, referred to in the field as process drama, is most emphatically applicable to the education of young children. Young children actively gain skills in dialogue, collaboration, and creative problem solving, by collectively pretending, with teacher guidance, to be in an imaginative elsewhere—something most are well adept at from their own natural dramatic play. This article argues that ages 3–8 represent a critical time for children to benefit from process drama integrated into the curriculum and highlights the unique impact process drama can make when it is used to explore a particular problem, situation, or theme, referencing related national core arts. Documentation from well-established programs is presented, and recommendations for training drama teachers on how to work in early childhood and for early childhood teachers on how to integrate process drama into their curriculum are presented.     

最优化制备沙棘膏工艺研究

沙棘果为制备沙棘膏的原料,以沙棘膏中总黄酮含量为考察影响工艺因素的指标,通过单因素试验和正交试验,确定最优化制取沙棘膏工艺为:料液比1∶20(g/mL),温度75℃,提取溶剂为80%乙醇,综合考虑成本因素,提取时间4 h。按照该工艺沙棘膏中总黄酮的得率为15.64%。     

The duality of the qualitative determinacy of the epidemic process in anthroponoses as the main trait distinguishing them from the epidemic manifestations of zoonotic diseases in man

The present article substantiates the necessity of defining more accurately the notion "epidemic process" and using this term only in reference to anthroponotic diseases. Proceeding from the philosophical concept of the qualitative definiteness of material objects and phenomena, the author proposes to distinguish the epidemic process in anthroponoses from mass spread of zoonotic diseases among humans on the basis of using the systemic qualities of the epidemic process, and in particular the principle of the dual character of the qualitative definiteness of objects and phenomena as the distinctive feature of the epidemic process of anthroponoses. Distinction, based on this principle, between anthroponotic diseases and zoonotic diseases in groups of humans must be reflected in the definitions of these phenomena. The application of the term "epidemic process" only in reference to anthroponotic diseases is proposed, while zoonotic diseases in groups of humans should be considered as epidemic manifestations of zoonotic infections.     

Composting of municipal solid waste

This paper reviews the literature on the composting process, which is one of the technological options for the processing of municipal solid wastes (MSWs). The process assumes a great significance, particularly from the point of its economic viability, capability for recycling of nutrients and waste minimization with minimum environmental problems. A number of studies on various aspects of the composting process, including process control and monitoring parameters such as temperature, pH, moisture content, aeration, and porosity are reviewed. Salient observations on microbial properties of composting are described and details of vermicomposting, as well as a detailed analysis of patents on composting of MSW, are presented.     

Industrial glucoamylase fed-batch benefits from oxygen limitation and high osmolarity

The market for glucoamylase is large and very competitive and the production process has been optimized through several decades. So far a thorough characterization of the process has not been published, but previous academic reports suggest that the process suffers from severe byproduct formation. In this study we have carried out a thorough characterization of a process as close as possible to the industrial reality. The results show that the oxygen-limited phases of the process have the highest glucoamylase yields on carbon and that the byproducts are efficiently reused in late phases of the process. An alternative process with low glucose concentration show that high osmolarity is beneficial for the process, and we conclude that oxygen limitation, high osmolarity, and the associated byproduct metabolism are important for the efficiency of the process.     

An experimental strategy validated to design cost-effective culture media based on response surface methodology

For any fermentation process, the production cost depends on several factors, such as the genetics of the microorganism, the process condition, and the culture medium composition. In this work, a guideline for the design of cost-efficient culture media using a sequential approach based on response surface methodology is described. The procedure was applied to analyze and optimize a culture medium of registered trademark and a base culture medium obtained as a result of the screening analysis from different culture media used to grow the same strain according to the literature. During the experiments, the procedure quantitatively identified an appropriate array of micronutrients to obtain a significant yield and find a minimum number of culture medium ingredients without limiting the process efficiency. The resultant culture medium showed an efficiency that compares favorably with the registered trademark medium at a 95% lower cost as well as reduced the number of ingredients in the base culture medium by 60% without limiting the process efficiency. These results demonstrated that, aside from satisfying the qualitative requirements, an optimum quantity of each constituent is needed to obtain a cost-effective culture medium. Study process variables for optimized culture medium and scaling-up production for the optimal values are desirable.     

Closed system isolation and scalable expansion of human placental mesenchymal stem cells

Mesenchymal stem cells (MSC) are emerging as a leading cellular therapy for a number of diseases. However, for such treatments to become available as a routine therapeutic option, efficient and cost-effective means for industrial manufacture of MSC are required. At present, clinical grade MSC are manufactured through a process of manual cell culture in specialized cGMP facilities. This process is open, extremely labor intensive, costly, and impractical for anything more than a small number of patients. While it has been shown that MSC can be cultivated in stirred bioreactor systems using microcarriers, providing a route to process scale-up, the degree of numerical expansion achieved has generally been limited. Furthermore, little attention has been given to the issue of primary cell isolation from complex tissues such as placenta. In this article we describe the initial development of a closed process for bulk isolation of MSC from human placenta, and subsequent cultivation on microcarriers in scalable single-use bioreactor systems. Based on our initial data, we estimate that a single placenta may be sufficient to produce over 7,000 doses of therapeutic MSC using a large-scale process.     

流加菌种对厌氧氨氧化工艺的影响

厌氧氨氧化工艺具有很高的容积氮去除速率,现已成功应用于污泥压滤液等含氨废水的脱氮处理,容积氮去除速率高达9.5 kg/(m3·d)。但由于厌氧氨氧化菌为自养型细菌,生长缓慢,对环境条件敏感,致使厌氧氨氧化工艺启动时间过长,运行容易失稳,并且不适合处理有机含氨废水和毒性含氨废水,极大地限制了该工艺的进一步推广应用。为了克服厌氧氨氧化工艺实际应用中存在的问题,结合发酵工业中常用的菌种流加技术,提出了一种新型的菌种流加式厌氧氨氧化工艺,研究了该新型工艺在厌氧氨氧化工艺的启动过程、稳定运行以及处理有机含氨废水和毒性含氨废水等方面的应用情况。结果表明,通过向反应器内补加优质厌氧氨氧化菌种,可提高厌氧氨氧化菌数量及其在菌群中的比例,强化厌氧氨氧化功能。据此研发的菌种流加式厌氧氨氧化工艺不仅可以实现快速启动,而且可以稳定运行,并突破了有机物和毒物所致的运行障碍,拓展了厌氧氨氧化工艺的应用范围。     

Functional outline of the epidemic process

The present study has shown that on the level of the parasitic system the epidemic process is a biological system, wherein the host population serves as the internal regulator, the mechanism of transmission serves as the external regulator and the parasite population, as the regulated object. The biological regulating mechanisms of the epidemic process have fundamental differences in the groups of infectious with various mechanisms of transmission, and the specific nature of the mechanism of transmission determines the peculiar features of the biological mechanism which governs the self-regulation of the epidemic process. In contrast, on a higher level of the organization of the epidemic process, i. e. on the level of the socio-ecological system, the epidemic process is a biosocial system, wherein the human society serves as the regulator, the parasitic system serves as the regulated object and the mechanism of transmission plays the role of the filter which determines the scope of social factors, most important in the regulation of the epidemic process in a given infection. The spontaneous regulation of the epidemic process is the freed forward channel from the regulator to the regulated object, and the controlled regulation is the feedback channel.     

A comprehensive model of audiovisual perception: both percept and temporal dynamics

The sparse information captured by the sensory systems is used by the brain to apprehend the environment, for example, to spatially locate the source of audiovisual stimuli. This is an ill-posed inverse problem whose inherent uncertainty can be solved by jointly processing the information, as well as introducing constraints during this process, on the way this multisensory information is handled. This process and its result--the percept--depend on the contextual conditions perception takes place in. To date, perception has been investigated and modeled on the basis of either one of two of its dimensions: the percept or the temporal dynamics of the process. Here, we extend our previously proposed audiovisual perception model to predict both these dimensions to capture the phenomenon as a whole. Starting from a behavioral analysis, we use a data-driven approach to elicit a bayesian network which infers the different percepts and dynamics of the process. Context-specific independence analyses enable us to use the model's structure to directly explore how different contexts affect the way subjects handle the same available information. Hence, we establish that, while the percepts yielded by a unisensory stimulus or by the non-fusion of multisensory stimuli may be similar, they result from different processes, as shown by their differing temporal dynamics. Moreover, our model predicts the impact of bottom-up (stimulus driven) factors as well as of top-down factors (induced by instruction manipulation) on both the perception process and the percept itself.     

Alterations in endogenous levels of cytokinins following grafting of Pinus radiata support ratio of cytokinins as an index of ageing and vigour

Markers for ageing or maturation in woody plants provides the possibility of identifying genotypes with a prolonged juvenile phase, or to evaluate reinvigoration procedures, such as grafting of adult material. This study focuses specifically on cytokinins (Cks) as markers, due to their role in the transition process from juvenile to adult states. Previous reports from our group disclosed that the ratio of isopentenyladenine-type (iP-type) to zeatin-type (Z-type) Cks decreases during tree maturation, a maturation and ageing index being likely in Pinus radiata. Based on these results, Cks were tested in terminal buds of adult and grafted adult P. radiata material to corroborate the importance of the aforementioned balance as an index in the reinvigoration process of adult trees associated with grafting procedures. Results revealed the reversion of this index pattern parallel to the reactivation of some juvenile traits, namely, increasing values of the ratio throughout the reinvigoration process. According to previous results, however, the opposite was the case during the reverse process. This fact allowed us to validate the iP-type/Z-type Ck ratio as an ageing and vigour index.     

厌氧氨氧化组合脱氮工艺研究进展

厌氧氨氧化工艺是一项高效、低耗的生物脱氮工艺,但受限于底物类型、硝氮积累等问题,其在主流应用中仍然面临一些挑战。近些年来,针对上述问题,厌氧氨氧化组合工艺得到了广泛关注。通过对近年来所开发的厌氧氨氧化组合工艺,从工艺原理、优缺点、影响因素、工艺拓展性及其在推广应用中存在的关键瓶颈等角度进行探讨,并结合课题组相关工作,展望了厌氧氨氧化组合工艺在城市生活污水处理中的发展前景。     

正交试验优选超声提取芦笋总皂苷的工艺

目的:优选超声提取芦笋总皂苷的最佳工艺。方法:以高氯酸作为显色剂,用紫外分光光度法测定芦笋中总皂苷的含量,并以提取率为评价指标,采用单因素实验和正交试验优选最佳提取工艺。结果:芦笋总皂苷超声提取的最佳工艺为乙醇浓度70%,料液比1:15(W/V),超声时间50 min,超声温度40℃。结论:该提取工艺可行,为芦笋总皂苷的进一步研究提供了依据。     

Dynamic modeling and analyses of simultaneous saccharification and fermentation process to produce bio-ethanol from rice straw

The rice straw, an agricultural waste from Asians’ main provision, was collected as feedstock to convert cellulose into ethanol through the enzymatic hydrolysis and followed by the fermentation process. When the two process steps are performed sequentially, it is referred to as separate hydrolysis and fermentation (SHF). The steps can also be performed simultaneously, i.e., simultaneous saccharification and fermentation (SSF). In this research, the kinetic model parameters of the cellulose saccharification process step using the rice straw as feedstock is obtained from real experimental data of cellulase hydrolysis. Furthermore, this model can be combined with a fermentation model at high glucose and ethanol concentrations to form a SSF model. The fermentation model is based on cybernetic approach from a paper in the literature with an extension of including both the glucose and ethanol inhibition terms to approach more to the actual plants. Dynamic effects of the operating variables in the enzymatic hydrolysis and the fermentation models will be analyzed. The operation of the SSF process will be compared to the SHF process. It is shown that the SSF process is better in reducing the processing time when the product (ethanol) concentration is high. The means to improve the productivity of the overall SSF process, by properly using aeration during the batch operation will also be discussed.     

Regulatory perspectives from Japan - comparability of biopharmaceuticals.

In Japan there is no official guideline about comparability assessment of biotechnological products at present. However, there is some notifications which should be referred to, when the manufacturer changes the manufacturing process. Here, regulatory perspectives from Japan on the comparability assessment are presented. When establishing the comparability of biotechnological products derived from different manufacturing processes and the validity of modified manufacturing process, rational step-by-step approaches based on both product and process aspects would be useful. At first, relevant physicochemical and biological properties of products including purity, impurity profiles and stability should be compared before and after the manufacturing change, depending on the type and nature of the desired products. It is also necessary to examine the capacities of the new manufacturing process for ensuring the consistent production of the active protein product as well as the anticipated elimination of potential impurities and contaminants. Further relevant assessment of preclinical and clinical comparability of product may be necessary in some cases.     

Yeast population dynamics of industrial fuel-ethanol fermentation process assessed by PCR-fingerprinting

Yeast population used in industrial production of fuel-ethanol may vary according to the plant process condition and to the environmental stresses imposed to yeast cells. Therefore, yeast strains isolated from a particular industrial process may be adapted to such conditions and should be used as starter strain instead of less adapted commercial strains. This work reports the use of PCR-fingerprinting method based on microsatellite primer (GTG)₅ to characterize the yeast population dynamics along the fermentation period in six distilleries. The results show that indigenous fermenting strains present in the crude substrate can be more adapted to the industrial process than commercial strains. We also identified new strains that dominate the yeast population and were more present either in molasses or sugar cane fermenting distilleries. Those strains were proposed to be used as starters in those industrial processes. This is the first report on the use of molecular markers to discriminate Saccharomyces cerevisiae strains from fuel-ethanol producing process.     

A review of the production of ethanol from softwood

Ethanol produced from various lignocellulosic materials such as wood, agricultural and forest residues has the potential to be a valuable substitute for, or complement to, gasoline. One of the major resources in the Northern hemisphere is softwood. This paper reviews the current status of the technology for ethanol production from softwood, with focus on hemicellulose and cellulose hydrolysis, which is the major problem in the overall process. Other issues of importance, e.g. overall process configurations and process economics are also considered.