The scale-down of an industrial disc stack centrifuge

The means are described whereby a disc stack centrifuge may be scaled-down by up to 10-fold of its separation capacity. The centrifuge separation characteristics so measured are suitable for direct scale-up predictions of centrifuge performance where only small volumes of particle suspension are available for study. Such an ability to scale-down is especially important in the processing of biological particles where for example, in the early stage of process development, there is often insufficient fermentation broth for fullscale studies. Scale-down is achieved by the reduction of the number of discs available for separation purposes and by the careful positioning of these discs in the overall disc stack. A combination of dye tracer and particle separation studies are used to optimise the disc stack configuration. The resulting grade efficiency curve is an accurate reflection of the curve for the full-scale centrifuge especially in the critical design region specifying centrifuge throughput for near complete particle recovery.     

Strategy for selection of methods for separation of bioparticles from particle mixtures

The desired product of bioprocesses is often produced in particulate form, either as an inclusion body (IB) or as a crystal. Particle harvesting is then a crucial and attractive form of product recovery. Because the liquid phase often contains other bioparticles, such as cell debris, whole cells, particulate biocatalysts or particulate by-products, the recovery of product particles is a complex process. In most cases, the particulate product is purified using selective solubilization or extraction. However, if selective particle recovery is possible, the already high purity of the particles makes this downstream process more favorable. This work gives an overview of typical bioparticle mixtures that are encountered in industrial biotechnology and the various driving forces that may be used for particle-particle separation, such as the centrifugal force, the magnetic force, the electric force, and forces related to interfaces. By coupling these driving forces to the resisting forces, the limitations of using these driving forces with respect to particle size are calculated. It shows that centrifugation is not a general solution for particle-particle separation in biotechnology because the particle sizes of product and contaminating particles are often very small, thus, causing their settling velocities to be too low for efficient separation by centrifugation. Examples of such separation problems are the recovery of IBs or virus-like particles (VLPs) from (microbial) cell debris. In these cases, separation processes that use electrical forces or fluid-fluid interfaces show to have a large potential for particle-particle separation. These methods are not yet commonly applied for large-scale particle-particle separation in biotechnology and more research is required on the separation techniques and on particle characterization to facilitate successful application of these methods in industry.     

Field- and flow-dependent trapping of red blood cells on polycarbonate accumulation wall in sedimentation field-flow fractionation

Sedimentation field-flow fractionation (SdFFF) instrumentation is now mature. Methodological procedure and particle separation development rules are well established even in the case of biological species. However, in some biological applications, retention properties of samples not predicted by any field-flow fractionation (FFF) elution models are observed. It is demonstrated that the trapping of cellular material in the separation system is not related to geometrical instrumentation features but to channel wall characteristics. The physicochemical particle–wall attractive interactions are different depending on the flow-rate and field intensity applied. Separation power in SdFFF for biological species is therefore limited by the intensity of these interactions. In terms of separation, a balance is to be found between external field and flow intensity to limit particle–wall interactions.     

Detection of oxidized high-density lipoprotein

This paper reviews working procedures for the separation and detection of oxidized high-density lipoproteins (ox-HDL) and their constituents. It begins with an introductory overview of structural alterations of the HDL particle and its constituents generated during oxidation. The main body of the review delineates various procedures for the isolation and detection of ox-HDL as well as the purification and separation of phosphatidylcholine metabolites and denatured apolipoproteins in the particle. The useful methods published more recently are picked up and the utility of the separation techniques is described. The last section covers a clinical evaluation of changes in these factors in ox-HDL as well as future directions of ox-HDL research.     

Manipulation of micro- and nanoparticles in viscoelastic fluid flows within microfluid systems

Manipulation of micro- and nanoparticles in complex biofluids is highly demanded in most biological and biomedical applications. A significant number of microfluidic platforms have been developed for inexpensive, rapid, accurate, and efficient particle manipulation. Due to the enormous potential of viscoelastic fluids (VEFs) for particle manipulation, various emerging microfluidic-based VEFs techniques have been presented over the last decade. This review provides an intuitive understanding of VEF physics for particle separation in different microchannel geometries. Besides, active and passive VEF methods are critically reviewed, highlighting the potential and practical challenges of each technique for particle/cell focusing, sorting, and separation. The outcome of this study could enable recognizing deliverable VEF technology with the promising prospect in the manipulation of submicron biological samples (e.g., exosomes, DNA, and proteins).     

Assessment of a disc stack centrifuge for use in mammalian cell separation

A prototype disc stack centrifuge was tested for the separation of mammalian cell cultures from 80- and 2000-L fermentations. The clarification capacity for mammalian cells was excellent, but some smaller particles remained in the supernatant and reduced its usefulness for downstream processing. In order to identify the source of such particle formation, several parameters were assessed and minimum particle size for separation was calculated. An analysis of particle distribution was performed. Temperature and pressure effects inside the centrifuge bowl were measured. Some modifications of mechanical engineering can be suggested for the improvement of the use of standard disc stack centrifuges for mammalian cells. (c) 1995 John Wiley & Sons, Inc.     

Three-Dimensional Analysis of Scattering Field Interactions and Surface Plasmon Resonance in Coupled Silver Nanospheres

Scattering field interactions and surface plasmon resonance (SPR) in coupled silver nanospheres are simulated by using the finite-element method, which includes the influences of near-field enhancements of electric field by the particle sizes, separation distances, propagation directions, as well as the polarizations of the incident wave. The proposed structures exhibit a red- and blue-shifted that can be tuned by varying the particle sizes and the separation distances, respectively. Implications for surface-enhance Raman scattering and nano-optics are discussed in three-dimensional models. The evolution of SPR and nano-photonic device with the structural variations can be designed in a controlled manner.     

Separation of polystyrene microbeads using dielectrophoretic/gravitational field-flow-fractionation.

The characterization of a dielectrophoretic/gravitational field-flow-fractionation (DEP/G-FFF) system using model polystyrene (PS) microbeads is presented. Separations of PS beads of different surface functionalization (COOH and none) and different sizes (6, 10, and 15 microm in diameter) are demonstrated. To investigate the factors influencing separation performance, particle elution times were determined as a function of particle suspension conductivity, fluid flow rate, and applied field frequency and voltage. Experimental data were analyzed using a previously reported theoretical model and good agreement between theory and experiment was found. It was shown that separation of PS beads was based on the differences in their effective dielectric properties. Particles possessing different dielectric properties were positioned at different heights in a fluid-flow profile in a thin chamber by the balance of DEP and gravitational forces, transported at different velocities under the influence of the fluid flow, and thereby separated. To explore hydrodynamic (HD) lift effects, velocities of PS beads were determined as a function of fluid flow rate in the separation chamber when no DEP field was applied. In this case, particle equilibrium height positions were governed solely by the balance of HD lift and gravitational forces. It was concluded that under the experimental conditions reported here, the DEP force was the dominant factor in controlling particle equilibrium height and that HD lift force played little role in DEP/G-FFF operation. Finally, the influence of various experimental parameters on separation performance was discussed for the optimization of DEP/G-FFF.     

Enzymatic versus chemical deinking of non-impact ink printed paper

Enzymatic versus chemical deinking is examined for MOW and photocopy prints. Several enzymatic preparations and two fibre/ink particle separation methods are tested. Deinking was monitored by image analysis and standard pulp and paper characterisation procedures. The effectiveness of the fibre/ink particle separation method depends on the ink particle's size: for smaller particles a washing step is recommended whereas for larger particles, the use of flotation is necessary. The enzymatic treatment is a competitive alternative for MOW and photocopy paper deinking. However, the process requires the selection of an adequate enzymatic preparation for each paper grade.     

Methods of isolating serum lipoproteins

The methods of serum lipoproteins separation are considered. Advantages and faults of ultracentrifugation, electrophoresis, precipitation, gel chromatography, immune-specific and filtration methods for isolation of the lipid-protein complexes are briefly characterized. The prospects of the separation methods for investigation of the lipid-protein particle structure and rapid hyperlipoproteinemias screening are discussed.     

Agglomeration behaviour of magnetic microparticles during separation and recycling processes in mRNA purification

Purification of mRNA with oligo(dT)‐functionalized magnetic particles involves a series of magnetic separations for buffer exchange and washing. Magnetic particles interact and agglomerate with each other when a magnetic field is applied, which can result in a decreased total surface area and thus a decreased yield of mRNA. In addition, agglomeration may also be caused by mRNA loading on the magnetic particles. Therefore, it is of interest how the individual steps of magnetic separation and subsequent redispersion in the buffers used affect the particle size distribution. The lysis/binding buffer is the most important buffer for the separation of mRNA from the multicomponent suspension of cell lysate. Therefore, monodisperse magnetic particles loaded with mRNA were dispersed in the lysis/binding buffer and in the reference system deionized water, and the particle size distributions were measured. A concentration‐dependent agglomeration tendency was observed in deionized water. In contrast, no significant agglomeration was detected in the lysis/binding buffer. With regard to magnetic particle recycling, the influence of different storage and drying processes on particle size distribution was investigated. Agglomeration occurred in all process alternatives. For de‐agglomeration, ultrasonic treatment was examined. It represents a suitable method for reproducible restoration of the original particle size distribution.     

Effect of particle size distribution on filtration performance of cell culture medium

Cell culture media used in CHO-based biologic processes are typically sterile filtered to prevent microbial contamination prior to inoculation. In this study, the impact of common sterile filter throughput on a different, commercially available cell culture media was evaluated from the intermediate-adsorption fouling model of the filtration model. The key particle size range for optimum filter performance was discussed and identified by measuring the submicron order particle size distribution. It may be possible to predict the performance of filter capacity with size-exclusive separation by understanding the media particle counts and size distribution.     

A model of particle capture by bryozoans in turbulent flow: significance of colony form

A hydrodynamic model was developed to examine particle capture by lophophores of encrusting bryozoans. Particle capture rate is predicted to increase with increasing speed of the feeding current. There should be a large feeding advantage when lophophores are tightly packed and excurrents are vented through chimneys. This prediction contradicts conclusions of an earlier model study and suggests that selection for colony integration has a basis in the acquisition of food. If lophophores are not tightly packed, particle-capture patterns depend on two key ratios: the advection ratio (feeding current velocity to shear velocity) and the separation ratio (lophophore spacing to lophophore diameter). At high separation ratios, particle capture rates should be fairly uniform among zooids. At high advection ratios, lophophores located near the upstream colony edge should experience higher rates of particle capture. Rates of particle capture in turbulent flows should greatly exceed those in laminar flows (of identical speed) when excurrent waters are locally remixed into the flow above lophophores. However, when lophophores are tightly packed and excurrents are vented through chimneys, feeding rates should be identical in turbulent and laminar flows. Thus, colonies that vent excurrents through chimneys may be uniquely able to exploit weak laminar flows.     

Lateral phase separations in Escherichia coli membranes

Membranes from unsaturated fatty acid auxotrophs of Escherichia coli were studied by spin labeling and freeze-fracturing. From measurements of the partition of the spin label TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) between the aqueous phase and fluid lipids in isolated membranes, temperatures, corresponding to the onset and completion of a lateral phase separation of the membrane phospholipids were determined. By freeze-fracture electron microscopy a change in the distribution of particle in the membrane was observed around the temperature of the onset of the lateral phase separation. When cells were frozen from above that temperature a netlike distribution of particles in the plasma membrane was observed for unfixed preparations. When frozen after fixing with glutaraldehyde the particle distribution was random. In membranes of cells frozen with or without fixing from a temperature below the onset of the phase separation, the particles were aggregated and large areas void of particles were present. This behavior can be understood in terms of the freezing rate with the aid of phase diagrams.     

Separation of B and C Type Virions by Centrifugation in Gentle Density Gradients

Murine type B particles were separated from type C (Rauscher leukemia virus) by means of gentle (low-increment rate) density gradients. The best separation was obtained when the density ranged from 1.13 to 1.20 g/cm³ when sucrose was used and from 1.12 to 1.28 g/cm³ with CsCl. The buoyant densities of the B and C particle bands in sucrose were 1.18 and 1.16 g/cm³, respectively. The CsCl gradient gave a better separation with the B particles banding at a density of 1.20 g/cm³ and with the C particle density little different from its value in sucrose.     

Depletion effect and biomembrane budding

Depletion effects are well known to lead to phase separation in microsystems consisting of large and small particles with short-range repulsive interactions that act over macromolecular length scales. The equilibrium mechanics between an enveloped colloidal particle and a biomembrane caused by entropy is investigated by using a continuum model. We show that the favorable contact energy stems from entropy, which is sufficient to drive engulfment of the colloidal particle, and deformation of the biomembrane determines the resistance to the engulfment of the colloidal particle. The engulfment process depends on the ratio of the radii of the larger particle and smaller particles and the bending rigidity. The results show insights into the effects of depletion on biomembrane budding and nanoparticle transportation by a vesicle.     

Spontaneous self-assembly of diblock copolymers in nanoconfined geometries by dissipative particle dynamics

We performed dissipative particle dynamics (DPD) simulations to reproduce phase separation morphologies of diblock copolymers for directed self-assembly (DSA) lithography. DSA is a promising technique to overcome the current photolithography resolution limit. The Flory–Huggins χ parameter estimated from a small-angle X-ray scattering experiment was used for the DPD simulations owing to the multiple degrees of coarse-graining. The degree of coarse-graining and the bond parameter for the spring force were optimised to represent the experimental result of the number of lamellar layers formed in a trench guide. The DPD simulations using these parameters can also represent the diameter of the central cylinder domain that is formed by phase separation in the cylindrical hole. It was found that the bond parameter considering the spreading of polymer segments in a coarse-grained particle gives good quantitative agreement between the results of the simulations and the experimental data.     

Analysis of the formation mechanism for thermoresponsive-type coacervate with functional copolymers consisting of N-isopropylacrylamide and 2-hydroxyisopropylacrylamide

We now report the formation mechanism of the thermoresponsive-type coacervate with the novel functional temperature-sensitive polymer, poly(N-isopropylacrylamide-co-2-hydroxyisopropylacrylamide) (poly(NIPAAm-co-HIPAAm)), synthesized in our laboratory. The effects of introducing the hydrophilic comonomer (HIPAAm) into the copolymer chains and adding salts on the behaviors of the coacervate droplets induced in the poly(NIPAAm-co-HIPAAm) aqueous solutions were investigated. Not only the particle sizes of the coacervate droplets but also the cloud points of the copolymer solutions could be modulated by the HIPAAm content incorporated in the copolymers. Moreover, the particle sizes of the coacervate droplets were also changed by adding salts. Namely, the particle sizes increased with the decreasing HIPAAm composition and increasing NaCl concentration. In addition, the 1H NMR and differential scanning calorimetric measurements suggested that as the HIPAAm content decreased or NaCl concentration increased, dehydration of the copolymers induced in the phase transition and/or separation became much easier. Therefore, on the basis of the findings obtained from these measurements, we determined that the particle sizes of the coacervate droplets induced in the temperature-sensitive polymers increased as the number of the water molecules, which are dissociated from the polymeric chains during the phase transition and/or separation, increased. Besides, to examine the separation of the model solutes, the aqueous two-phase separation with the coacervate droplets of poly(NIPAAm-co-HIPAAm) was carried out. The partitions of Methyl Orange as a model solute under both acidic (pH 2) and basic (pH 12) conditions were performed. The amount of Methyl Orange partitioned into the coacervate droplets at pH 12 is much greater than that at pH 2, which indicated that the coacervate droplets could recognize a slight difference in the polarity or structure between the model solutes.     

Experimental design methodology applied to the study of channel dimensions on the elution of red blood cells in gravitational field flow fractionation

Field flow fractionation (FFF) separation techniques have gained considerable success with micron-sized species. Living red blood cells (RBCs) of any origin have emerged as ideal models for cell separation development. Their elution mode is now described as “Lift-Hyperlayer”. Certain separator dimension parameters are known to play a key role in the separation and band spreading process. Systematic studies of channel dimensions effects on RBC retention, band spreading, peak capacity and on a novel parameter described as “Particle Selectivity” were set up by means of a two-level factorial experimental design. From experimental results and statistical calculations it is confirmed that channel thickness plays a major role in retention ratio, peak variance, peak capacity and particle selectivity. Channel breadth strongly influences plate height, with lower impact on peak capacity and particle selectivity. Retention ratio, peak variance and peak capacity observed results are modulated by second-order interactions between channel dimensions. Preliminary rules for channel configurations are therefore set up and depend on separation goals. It is shown that a very polydisperse population is best disentangled in a thin and narrow channel whatever its length. If a mixture of many different micron-sized species is considered (each of limited polydispersities); a thick and broad channel should be preferred, with length modulating peak capacity to disentangle this polymodal mixture.     

Physical characteristics of rumen contents in two small ruminants of different feeding type,the mouflon (Ovis ammon musimon) and the roe deer (Capreolus capreolus)

In domestic ruminants, the stratification of forestomach contents – the results of flotation and sedimentation processes – is an important prerequisite for the selective particle retention in this organ. A series of anatomical and physiological measurements suggests that the degree of this stratification varies between browsing and grazing wild ruminants. We investigated the forestomach contents of free-ranging mouflon and roe deer shot during regular hunting procedures. There was no difference between the species in the degree by which forestomach ingesta separated according to size due to buoyancy characteristics in vitro. However, forestomach fluid of roe deer was more viscous than that of mouflon, and no difference in moisture content was evident between the dorsal and the ventral rumen in roe deer, in contrast to mouflon. Hence, the forestomach milieu in roe deer appears less favourable for gas or particle separation due to buoyancy characteristics. These findings are in accord with notable differences in forestomach papillation between the two species. In roe deer, particle separation is most likely restricted to the reticulum, whereas in mouflon, the whole rumen may pre-sort particles to a higher degree. The results suggest that differences in forestomach physiology may occur across ruminant species.