Immobilization of cytochrome c on beaded poly(N-acrylylpyrrolidine)

In order to examine a procedure whereby the points of covalent attachment between the components of a protein-polymer conjugate could be determined, horse heart cytochrome c was attached to a beaded copolymer of N-acrylylpyrrolidine, N,N′-bis(acrylyl)-1,2-diaminoethane and N-acrylyl-1,6-aminohexane through a cleavable azo linkage. Studies of protein removed from this conjugate showed that attachment of the polymer to cytochrome occurred predominantly through single lysine residues on the protein surface; lysine-25 was tentatively identified as the residue most extensively utilized in this way. Protein was also linked to the polymer by two lysine residues and a significant amount of protein was irreversibly attached to the polymer under the reaction conditions used.     

Assessing the impact of inductive electronic effects on the metrical parameters and reactivity of a series of ferrous complexes

Reported are four iron(II) complexes with N-benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^H) and three electronically modified derivatives: N-(4-methoxy)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^OMe), N-(4-chloro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^Cl), and N-(4-nitro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^NO₂). The four ligands react with FeCl₂ to form a series of mononuclear species with the general formula [Fe(L^R)Cl₂]. The cis-α conformation of the ligand places the amine N-donors trans to the Fe-Cl bonds. The identity of the 4-benzyl substituent has profound influences on the lengths of the iron-ligand bonds, the optical spectra, and the redox activities of the [Fe(L^R)Cl₂] compounds.     

Characteristics of xanthan gum-based biodegradable superporous hydrogel

A novel biopolymer-based superporous hydrogel (SPH) was synthesized through chemical crosslinking by graft copolymerization of 2-hydroxyethyl methacrylate (HEMA) and acrylic acid (AA) on to xanthan gum (XG) via redox initiator system of ammonium persulfate (APS) and N, N, N′, N′-tetramethylethylenediamine (TMED), in the presence of N, N′-methylenebisacrylamide (MBA) crosslinking agent, sodium bicarbonate foaming agent, a triblock copolymer of polyoxyethylene/polyoxypropylene/polyoxyethylene as a foam stabilizer. Characterization of SPH was done by FT-IR, TGA, SEM, HPC and GCMS. The effects of pH and salinity on the swelling aptitude of the SPH were investigated along with its degradability in Streptococcus bovis medium.     

Computer simulation of the conformational properties of retro–inverso peptides. I. Empirical force field calculations of rigid and flexible geometries of N-acetylglycine-N′- methylamide,bis(acetamido) methane,and N,N′- dimethylmalonamide and their corresponding Cα-methylated analogs

Rigid and flexible geometry calculations are described for N-acetylglycine-N′-methylamide, N-acetylalanine-N′-methylamide, and their retro-inverso analogs, bis(acetamido) methane, 1,1-bis(acetamido) ethane, N,N′-dimethylmalonamide, and N,N′-dimethyl-2-methyl-malonamide. The significance of relaxing all degrees of freedom, especially angular flexibility is demonstrated. The flexible geometry approach yields energy maps similar to those from rigid geometry, but the energy barriers between minima are substantially reduced, leading in general, to more probable transitions and a higher volume of accessible conformational space. Whereas the glycine and alanine derivatives exhibit their lowest energy minima in the C region, the gem-diaminoalkyl and malonyl residues show their lowest minima in the “α-helical” regions. With respect to the effect of side chains (H versus CH₃), the greatest conformational influence appears with the gem-diaminoalkyl residues. These results indicate significantly different conformational behavior of retro peptides and the implications of these pairwise incorporations of retro-inverso residues in peptide chains, are discussed.     

1,6-diamino-2,5-anhydro-1,6-dideoxy-l-iditol and some derivatives thereof

1,6-Diamino-2,5-anhydro-1,6-dideoxy-l-iditol (31) and its derivatives were synthesized, starting from 2,4-O-benzylidene-1,6-di-O-tosyl-d-glucitol. The 1,6-bis-(acetamido)-l-talo epoxide was readily hydrolyzed to the corresponding l-iditol derivative under anchimeric assistance of the 1-acetamido group. On treatment with formaldehyde-formic acid, diamine 31 gave a tricyclic, 1,4:3,6-bis(N,O-methylene) derivative which was stable under acidic conditions but, according to ¹³C-n.m.r. spectroscopy, was readily hydrolyzed to an equilibrium mixture in neutral, aqueous solution. The corresponding 1,6-bis(dimethylamino) derivative could be obtained by reducing this equilibrium mixture with borohydride. The different, quaternary salts obtained on methylation of the corresponding 1,6-bis(dimethylamino) derivatives with methyl iodide (aiming at the structure of epi-allo-muscarine) showed no muscarine-like, biological activity.     

Thermodynamic aspects of the gelatinization and swelling of crosslinked starch

Samples of epichlorohydrin crosslinked potato starch were prepared by using a high ratio of starch to water and alkali concentration below the gelatinization level. This yielded crosslinked samples that were partially crystalline, and where the number of crosslinks could be varied between 1 and 20 crosslinks per 100 anhydroglucose units. The degree of swelling varied regularly with degree of crosslinking, and the molecular weight between crosslinks M_c as derived from swelling data in a good swelling agent compared favorably with M_c derived from chemical analysis. From the heat of gelatinization of the crosslinked starches, as observed in a differential scanning calorimeter, for gelatinization in glycerol, water, and dimethylsulfoxide, a model for the gel state of the crosslinked starch is proposed. It is concluded that the entropy of melting is the determining factor in establishing the temperature of gelatinization.     

Molecular interaction of cationic gemini surfactant with bovine serum albumin: A spectroscopic and molecular docking study

Herein, we report the effect of N,N′-bis(dodecyloxycarbonylmethyl)-N,N,N′,N′-tetramethyl-1,2-ethanediammonium dibromide (dodecyl betainate gemini or DBG) on the structure and function of bovine serum albumin (BSA) by using fluorescence, time resolved fluorescence, circular dichroism and dynamic light scattering techniques. The Stern–Volmer quenching constants K_SV and the corresponding thermodynamic parameters viz ΔH, ΔG and ΔS have been estimated by the fluorescence quenching method. The results indicated that DBG binds spontaneously with BSA through hydrophobic interaction. Time resolved fluorescence data show that the quenching follows the static mechanism pathway. It can be seen from far-UV CD spectra that the α-helical network of BSA is disrupted and its content increases from 71% to 79% at lower concentrations which again decreases to 38% at higher concentration. DLS measurements suggested that hydrodynamic radius (R_h) decreases in the presence of 30 and 40 μM of DBG while it increases when the concentration of DBG was 70 and 100 μM. The molecular docking study indicated that DBG is embedded into subdomain IIA of BSA and binds with the R-914, R-195 and R-217 residues by hydrogen bonding and by hydrophobic interaction.     

[N,N′-Bis(salicylidene)-1,2-phenylenediamine]metal complexes with cell death promoting properties

We developed N,N′-bis(salicylidene)-1,2-phenylenediamine (salophene, 1) as a chelating agent for metal ions such as Mn(II/III), Fe(II/III), Co(II), Ni(II), Cu(II), and Zn(II). The resulting complexes, from which owing to the carrier ligand a selective mode of action is assumed, were tested for antiproliferative effects on the MCF-7 breast cancer cell line. The cytotoxicity in this assay depended on the nature of the transition metal used. Iron complexes in oxidation states +II and +III (3, 4) strongly reduced cell proliferation in a concentration-dependent manner, whereas, e.g., the manganese analogues 5 and 6 were only marginally active. Therefore, the [N,N′-bis(salicylidene)-1,2-phenylenediamine]iron(II/III) complexes 3 and 4 were selected for studies on the mode of action. Both complexes possessed high activity against various tumor cells, for instance, MDA-MB-231 mammary carcinoma cells as well as HT-29 colon carcinoma cells. They were able to generate reactive oxygen species, showed DNA binding, and induced apoptosis. Exchange of 1 by N,N′-bis(salicylidene)-1,2-cyclohexanediamine (saldach, 2) yielding complexes 7 and 8 reduced the in vitro effects drastically. An unequivocal mode of action cannot be deduced from these results, but it seems to be very likely that cell death is caused by interference with more than one intracellular target. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Cobalt(II) Schiff base complex on multi-wall carbon nanotubes (MWNTs) by covalently grafted method: Synthesis,characterization and liquid phase epoxidation of cyclohexene by air

Cobalt [(OH)₂-salophen] (N,N′-bis(4-hydroxysalicylidene)phenylene-1,2-diamine) complex was covalently grafted on the chemical modification of multi-wall carbon nanotubes (MWNTs); [Co((OH)₂-salophen)]@MWNTs]. The as-products were characterized by spectroscopy (FT-IR, Raman, and UV–Vis), TGA, and TEM. The cobalt(II) Schiff-base complex covalently anchored on modified MWNTs was characterized by different techniques. The catalytic activity of the novel nanotubes based materials was tested in the epoxidation of cyclohexene in the iso-butyraldehyde/air system using acetonitrile as solvent and very high conversion was obtained. The experimental results indicated very good catalytic activity and selectivity in the epoxidation of cyclohexene. Repeated runs of the catalysts were carried out three times and the results indicated that the catalyst was stable for the epoxidation of cyclohexene.     

Swelling-Induced Ca<Superscript>2+</Superscript> Influx and K<Superscript>+</Superscript> Efflux in American Alligator Erythrocytes

The American alligator can hibernate during winter, which may lead to osmotic imbalance because of reduced kidney function and lack of food consumption during this period. Accordingly, we hypothesized that their red blood cells would have a well-developed regulatory volume decrease (RVD) to cope with the homeostatic challenges associated with torpor. Osmotic fragility was determined optically, mean cell volume was measured by electronic sizing, and changes in intracellular Ca²⁺ concentration were visualized using fluorescence microscopy and fluo-4-AM. Osmotic fragility increased and the ability to regulate volume was inhibited when extracellular Na⁺ was replaced with K⁺, or when cells were exposed to the K⁺ channel inhibitor quinine, indicating a requirement of K⁺ efflux for RVD. Addition of the ionophore gramicidin to the extracellular medium decreased osmotic fragility and also potentiated volume recovery, even in the presence of quinine. In addition, hypotonic shock (0.5× Ringer) caused an increase in cytosolic Ca²⁺, which resulted from Ca²⁺ influx because it was not observed when extracellular Ca²⁺ was chelated with EGTA (ethylene glycol-bis(2-aminoethylether)-N,N,N′,N′-tetraacetic acid). Furthermore, cells loaded with BAPTA-AM (1,2-bis(2-aminophenoxymethyl)ethane-N,N,N′,N′-tetraacetic acid tetrakis(acetoxymethyl) ester) or exposed to a low Ca²⁺-EGTA hypotonic Ringer had a greater osmotic fragility and also failed to recover from cell swelling, indicating that extracellular Ca²⁺ was needed for RVD. Gramicidin reversed the inhibitory effect of low extracellular Ca²⁺. Finally, and surprisingly, the Ca²⁺ ionophore A23187 increased osmotic fragility and inhibited volume recovery. Taken together, our results show that cell swelling activated a K⁺ permeable pathway via a Ca²⁺-dependent mechanism, and this process mediated K⁺ loss during RVD.     

Viscoelastic properties of protein crystals: Triclinic crystals of hen egg white lysozyme in different conditions

A technique for the measurement of the dynamic Young's modulus E and logarithmic decrement ?? of protein crystals and other microscopic samples by the resonance method modified to a microscale is described. Monoclinic crystals of horse hemoglobin and sperm whale myoglobin; triclinic hen egg white lysozyme crystals, crosslinked by glutaraldehyde; and native and crosslinked needlelike lysozyme crystals were studied, as were amorphous protein films. The E of wet protein crystals is shown to be in the range (3–15) × 10³ kg/cm², ?? = 0.3–0.7. The crosslinking does not significantly affect the values. General elastic properties were analyzed for triclinic lysozyme crystals. No frequency dependence of E and ?? was found over the frequency range of 2.5–65 kHz. The temperature dependence was found to be characteristic for glassy polymers; the decrement of Young's modulus was ?2.4 ± 0.1%/°C. The guanidine HCl denaturation caused a 1000-fold decrease of E, its temperature dependence becoming similar to that of rubberlike materials. Studies of pH and salt effects showed E to be influenced by ionization of the acidic groups at pH 3–4.5. A humidity decrease from 100 to 30% caused a three- to fourfold increase of E and a decrease of ??. The final values of E = (40–60) × 10³ kg/cm² and ?? ? 0.1 were the same for dry crystals and amorphous films, whether crosslinked or not. These values may be attributed to the protein globular material.     

Biodegradabilities of Ethylenediamine-N,N′-disuccinic Acid (EDDS) and Other Chelating Agents

Biodegradabilities of chelating agents were tested with activated sludge. Ethylenediaminetetraacetic acid (EDTA) remained intact in the effluent even after acclimation for 100 days, but propanediamine-N,N′-disuccinic acid (PDDS) and nitrilotriacetic acid (NTA) were biodegraded after acclimation for 5 and 23 days, respectively. Optical isomers of ethylenediamine-N,N′-disuccinic acid (EDDS) had different biodegradabilities: SS- and RS-isomers were susceptible to biodegradation, but the RR-isomer was resistant. SS-isomer was degraded even by activated sludge without acclimation.     

Structural basis for the design of novel Schiff base metal chelate inhibitors of trypsin

The crystal structures of the complexes of bovine trypsin with m-guanidinosalicylidene-l-alaninato(aqua)copper(II) hydrochloride (inhibitor 1), [N,N′-bis(m-guanidinosalicylidene)ethylenediaminato]copper(II) (inhibitor 2), and [N,N′-bis(m-amidinosalicylidene)ethylenediaminato]copper(II) (inhibitor 4) have been determined. The guanidine-containing trypsin-inhibitors (1 and 2) bind to the trypsin active site in a manner similar to that previously reported for amidine-containing inhibitors, for example, m-amidinosalicylidene-l-alaninato(aqua)copper(II) hydrochloride (inhibitor 3). However, the binding mode of the guanidino groups of inhibitors 1 and 2 to Asp189 in the S1 pocket of trypsin was found to be markedly different from that of the amidino group of inhibitor 3. The present X-ray analyses revealed that the interactions of the metal ion of the inhibitors with the active site residues of trypsin play a crucial role in the binding affinity to the trypsin molecule. These structural information and inhibitory activity data for amidine- and guanidine-containing Schiff base metal chelate inhibitors provide new avenues for designing novel inhibitors against physiologically important trypsin-like serine proteases.     

The influence of inductive ligand electronics on the metrical parameters and redox potentials of a series of manganese(II) compounds

In order to assess the changes in the redox activity of a metal ion that result from inductive effects, three electronically modified derivatives of the ligand, N-benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^H), have been prepared: N-(4-nitro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^NO2), N-(4-chloro)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^Cl), and N-(4-methoxy)benzyl-N,N′-bis(2-pyridylmethyl)-1,2-ethanediamine (L^OMe). Due to the lack of a fully conjugated π-system between the 4-benzyl substituent and the N-donors, the electronic perturbation should influence a bound metal ion’s redox properties through primarily inductive pathways. The organic ligands react with MnCl₂ to form mononuclear complexes with the general formula [Mn(L^R)Cl₂]. The parent ligand, L^H, and its three derivatives each coordinate Mn(II) ions in a cis-α conformation, with the amine N-donors installed trans to the Mn-Cl bonds. Despite its distance from the metal ion, the electron-donating or - withdrawing group has a notable impact on both the metrical parameters of the Mn(II) compounds and the Mn(III/II) reduction potential. A single inductive perturbation can vary the reduction potential by as much as 50 mV.     

The influence of the copolymer composition on the diltiazem hydrochloride release from a series of pH-sensitive poly[(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide)-<Emphasis Type="Italic">co</Emphasis>-(methacrylic acid)] hydrogels

A series of poly[(N-isopropylacrylamide)-co-(methacrylic acid)] (P[(N-iPAAm)-co-(MAA)]) hydrogels was investigated to determine the composition that exhibits a better pH-modulated release of diltiazem hydrochloride (DIL.HCl). For this purpose hydrogel slabs were loaded with DIL.HCl by the immersion method, and its release under acidic medium (0.1N HCl, pH 1.2) and in phosphate buffer pH 7.2, using United States Pharmacopeia (USP) 24 Apparatus 1, was investigated. According to the results from the slabs, copolymers with 85% mol N-iPAAm content were selected to prepare tablets with different particle size. The effect of pH and particle size changes on DIL.HCl release from these last hydrogel tablets was investigated by a stepwise pH variation of the dissolution medium. The amount of DIL.HCl released from high N-iPAAm content copolymer slabs under acidic pH medium was not only very low but it was also released at a slow rate. In the 85% N-iPAAm tablets, significant differences between and within release profiles were found as a function of particle size and pH, respectively. A relationship between particle size and release rate has been found. The lower DIL.HCl release at acidic pH from enriched N-iPAAm copolymers is interpreted by a cooperative thermal- and pH-collapse. Although for the whole range of copolymer composition a dependence of the equilibrium of swelling on the pH was found, DIL.HCl release experiments indicated that hydrogels with 85% mol N-iPAAm are the more adequate to be used for modulated drug delivery systems. Additionally, the particle size of the tablet can be used to tailor the release rate.     

Liposome/DNA systems: correlation between association, hydrophobicity and cell viability

Small unilamellar vesicles associated with plasmid DNA showed maximum association efficiency for a cationic mixture of egg phosphatidylcholine (EPC):1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE):di-1,2-dioleoyl-3-trimethyl ammonium propane (DOTAP) (16:8:1 molar ratio) [65%], followed by neutral lipids EPC:1,2-dimyristoyl-sn-glycero-3-phosphoethanolamine (DMPE):cholesterol (Chol) (2:2:1 molar ratio) [30%], and a polymerized formulation 1,2-bis(10,12-tricosadiynoyl)sn-glycero-3-phosphocholine (DC8,9PC):DMPE:Chol (2:2:1 molar ratio) [11%]. The hydrophobicity factor (HF) for these formulations followed the trend DC8,9PC:DMPE:CHOL < EPC:DMPE:Chol < EPC:DOPE DOTAP, and DNA association did not alter this trend. Results suggest that the higher the HF value, the more fluid the membrane and the higher the efficiency of DNA association. On the other hand, no differences were observed in cell toxicity with lipids up to 1 mg/ml in VERO cells.     

Alginate and pectin composite films crosslinked with Ca ions: Effect of the plasticizer concentration

The manufacture of composite biofilms of alginate and LM-pectin crosslinked with calcium ions requires a two-step contact with Ca²⁺: initially a low-structured pre-film is formatted which is further crosslinked in a second contact with a more concentrated Ca²⁺ solution containing plasticizer. This research evaluated the influence of the plasticizer (glycerol) concentration (1–15% w/v) in this finishing reticulation step on final films characteristics. The results indicated that the extent of the simultaneous Ca²⁺ crosslinking and plasticization with glycerol was determined by the level of structural organization obtained in the pre-reticulation. Increasing the glycerol concentration of the crosslinking solution increased film solubility in water, moisture content, volumetric swelling and flexibility and decreased the resistance to tensile stress. Transparent alginate and pectin composite films with acceptable mechanical properties, low solubility and limited degree of swelling were obtained with 10% glycerol in the second contact solution.     

Diamidato-bis(diphenylphosphino) platinum(II) complexes: Synthesis, characterization, and reactivity in the presence of acid

The reaction of Pt(COD)Cl₂, where COD is 1,5-cyclooctadiene, with one equivalent of a diamidato-bis(phosphino) Trost ligand ((R,R)-2 = N,N′-bis(2-diphenylphosphino-1-benzoyl)-(1R,2R)-1,2-diaminocyclohexane, (R,R)-3 = N,N′-bis(2-diphenylphosphino-1-naphthoyl)-(1R,2R)-1,2-diaminocyclohexane, or (±)-4 = N,N′-bis(2-diphenylphosphino-1-benzoyl)-1,2-bis(aminobenzene)) in the presence of base afforded square planar diamidato-bis(phosphino) platinum(II) complexes (R,R)-2-Pt, (R,R)-3-Pt, (±)-4-Pt. Characterization of all complexes included the solution and solid state structure determination of each complex based on multinuclear NMR and X-ray analyses, respectively. Stability of the complexes in acid was examined on addition of HCl to (R,R)-2-Pt in chloroform and compared to the unreactive nature of the similar diamidato-bis(phosphino) complex 1-Pt (1 = 1,2-bis-N-[2′-(diphenylphosphino)benzoyl]diamino-benzene) in the presence of acid. Protonation of the bound amidato nitrogen atoms of (R,R)-2-Pt was observed along with decoordination of the nitrogen atoms from the platinum(II) center producing (R,R)-2-PtCl₂ in quantitative yield by NMR analysis. Confirmation of the product was made on comparison of the NMR spectra to that of authentic (R,R)-2-PtCl₂ prepared on reaction of Pt(COD)Cl₂ with (R,R)-2 in CH₂Cl₂ and characterized by single-crystal X-ray diffraction analysis and NMR spectroscopy. Results add to the knowledge of rich coordination chemistry of bis(phosphino) ligands with late transition metals, metal-amidato chemistry, and has implications in catalysis.     

Effect of diindolylmethane on Ca2+ homeostasis and viability in PC3 human prostate cancer cells

The effect of the natural product diindolylmethane on cytosolic Ca²⁺ concentrations ([Ca²⁺]_i) and viability in PC3 human prostate cancer cells was explored. The Ca²⁺-sensitive fluorescent dye fura-2 was applied to measure [Ca²⁺]_i. Diindolylmethane at concentrations of 20–50 µM induced [Ca²⁺]_i rise in a concentration-dependent manner. The response was reduced partly by removing Ca²⁺. Diindolylmethane-evoked Ca²⁺ entry was suppressed by nifedipine, econazole, SK&F96365, protein kinase C modulators and aristolochic acid. In the absence of extracellular Ca²⁺, incubation with the endoplasmic reticulum Ca²⁺ pump inhibitor thapsigargin or 2,5-di-tert-butylhydroquinone (BHQ) inhibited or abolished diindolylmethane-induced [Ca²⁺]_i rise. Incubation with diindolylmethane also inhibited thapsigargin or BHQ-induced [Ca²⁺]_i rise. Inhibition of phospholipase C with U73122 reduced diindolylmethane-induced [Ca²⁺]_i rise. At concentrations of 50–100 µM, diindolylmethane killed cells in a concentration-dependent manner. This cytotoxic effect was not altered by chelating cytosolic Ca²⁺ with 1,2-bis(2-aminophenoxy)ethane-N,N,N′,N′-tetraacetic acid (BAPTA). Annexin V/PI staining data implicate that diindolylmethane (50 and 100 µM) induced apoptosis in a concentration-dependent manner. In conclusion, diindolylmethane induced a [Ca²⁺]_i rise in PC3 cells by evoking phospholipase C-dependent Ca²⁺ release from the endoplasmic reticulum and Ca²⁺ entry via phospholipase A₂-sensitive store-operated Ca²⁺ channels. Diindolylmethane caused cell death in which apoptosis may participate.     

Synthesis of Bis-piperazine-type pH Buffer Agents and Their Application to Mammalian Cell Cultures

New bis-piperazine-type pH buffer agents were synthesized and their buffering properties were evaluated. The compounds proved to have two-fold larger pH buffering ability than 2-[4-(2-hydroxyethyl)-1-piperazinyl]ethanesulfonic acid (HEPES), a Good’s buffer traditionally used to control the pH value of culture media.

Human-human hybridoma HB4C5 cells were cultured in a serum-free medium containing these buffer agents. The cell growth and antibody production, using 1,2-N,N′-bis[N′′,N′′′-di(2-sulfonoethyl)piperazinyl]ethane, were greater than when HEPES.