Cyclo(D-Pro-L-Pro-D-Pro-L-Pro): Structural properties and cis/trans isomerization of the cyclotetrapeptide backbone

Combinations of L - and D -proline residues are useful compounds for finding new structures and properties of cyclic peptides. This is demonstrated with one striking example, the cyclic tetrapeptide c(D -Pro-L -Pro-D -Pro-L -Pro). For this molecule composed of strictly alternating D - and L -configurated residues, a highly symmetrical structure is expected, which should be an optically inactive meso-form. Cyclization of the enantiomeric pure linear precursor D -Pro-L -Pro-D -Pro-L -Pro, however, yields a racemic mixture of two enantiomeric cyclotetrapeptides, both with twofold symmetry and a cis–trans–cis–trans sequence of the peptide bonds. Remarkably, this formation of a racemate was not caused by racemization, but by cis/trans isomerization of all peptide bonds in the ring. This process may occur in the linear precursor during the ring formation (cyclization of conformers with trans–cis–trans or cis–trans–cis arrangement of the amide bonds) as well as in the enantiomeric pure cyclic tetrapeptide at higher temperature. In the latter case, an all-cis structure should exist as the intermediate, which can form a cis–trans–cis–trans sequence in two equivalent ways, leading finally to two enantiomeric cyclotetrapeptides. In the first one, the cis peptide bonds are attributed to the L -residues and the trans peptide bonds to the D -residues; in the second one, the cis bonds belong to the D and the trans bonds to the L -residues. The mixture of these two enantiomers does not crystallize in the racemic form, but in enantiomeric pure separate crystals. The structural properties could be proved by ¹H- and ¹³C-nmr spectroscopy and x-ray analysis. The cis/trans isomerization process was confirmed by optical rotation measurements and CD spectroscopy, as well as DREIDING model studies. Calorimetric measurements in the solid state suggest the existence of the expected all-cis intermediate. The backbone conformation of the 12-membered medium-sized ring shows only slight deviations—up to 6° —from the planarity of the peptide bonds. On the other hand, the four pyrrolidine rings show different types of puckering of the C_γ or the C_β atoms.     

Crystal structure and nmr conformation of a cyclic pseudotetrapeptide containing urethane backbone linkages

Urethane bonds, derived from the hydroxyl group of the tyrosine side chain, have been investigated as a new type of amide bond mimetic in the design of pseudopeptides. The structure of a representative cyclic pseudotetrapeptide that consists of an — Ala — Tyr(urethane) Ala — Tyr (urethane) sequence fused into a rigid ring has been studied in the solid state by x-ray crystallography and in solution by two-dimensional nmr techniques. The cyclic pseudotetrapeptide has an oblong shape. The backbone urethane bonds assume a trans–trans conformation. The carbonyl groups in the ring have an alternating pattern of down, up, down, up with respect to the average ring plane. Solution nmr studies give observed nuclear Overhauser effects and coupling constants largely in agreement with the crystal structure. However, in solution the observed structure is likely to be conformationally averaged, and in the averaged structure, the urethane bond is perpendicular to the plane of the aromatic ring of the tyrosine, while in the crystal it is close to this plane. These differences may be explained by intermolecular hydrogen-bonding interactions. Four aspects of the conformation of the cyclic pseudotetrapeptide were investigated in detail: the tyrosine residue with the attached side-chain urethane bond (the tyrosine-urethane unit), the conformation of the two urethane backbone linkages, the conformation of the two conventional peptide bonds within this unusual ring structure, and the tight turns within the cyclic pseudotetrapeptide. The conformation of the tight turns present in the cyclic pseudotetrapeptide is very similar to that of a β-bend of type II. Intermolecular hydrogen bonding, joining adjacent layers of the cyclic pseudotetrapeptide in the solid state, resemble a parallel β-pleated sheet. The presence of these structural motifs in the cyclic pseudotetrapeptide indicates that the tyrosine urethane unit may find applications in peptide and protein engineering. © 1994 John Wiley & Sons, Inc.     

Multiple interconverting conformers of the cyclic tetrapeptide tentoxin, [cyclo-(L-MeAla1-L-Leu2-MePhe[(Z)Δ]3-Gly4)], as seen by two-dimensional 1H-nmr spectroscopy

The conformations of the phytotoxic cyclic tetrapeptide tentoxin [cyclo-(L -MeAla¹-L -Leu²-MePhe[(Z)Δ]³-Gly⁴ )] have been studied in aqueous solution by two-dimensional proton nmr at various temperatures. Contrary to what is observed in chloroform, tentoxin exhibits multiple exchanging conformations in water. Aggregation phenomena were also observed. Four conformations with different proportions (51, 37, 8, and 4%) were observed at ?5°C. Models were constructed from nmr parameters and restrained molecular dynamics simulations. All the models exhibit cis-trans-cis-trans conformation of the amide bond sequence. The conversion from one form to another is accomplished by a conformational peptide flip consisting of a 180° rotation of a nonmethylated peptide bond. © 1995 John Wiley & Sons, Inc.     

Nmr studies of the molecular conformations in the linear oligopeptides H-(L-Ala)n-L-Pro-OH

The molecular conformations of the linear oligopeptides H-(L -Ala)_n-L -Pro-OH, with n = 1,2 and 3, have been investigated. ¹³C nmr observation of the equilibrium between the cis and trans forms of the Ala-Pro peptide bond indicated the occurrence of nonrandom conformations in solutions of these flexible peptides. The formation of the nonrandom species containing the cis form of the Ala-Pro bond was found to depend on the deprotonation of the carboxylic acid group of proline, the solvent, and the ionic strength in aqueous solution. The influence of intramolecular hydrogen bonding on the relative conformational energies of the species containing the cis and trans Ala-Pro peptide bond was studied by comparison of the peptides H-(Ala)_n-Pro-OH with analogous molecules where hydrogen bond formation was excluded by the covalent structure. In earlier work a hydrogen bond between the protonated terminal carboxylic acid group and the carbonyl oxygen of the penultimate amino acid residue had been suggested to stabilize conformations including trans proline. For the systems described here this hypothesis can be ruled out, since the cis:trans ratio is identical for molecules with methyl ester protected and free protonated terminal carboxylic acid groups of proline. Direct evidence for hydrogen bond formation between the deprotonated terminal carboxylic acid group and the amide proton of the penultimate amino acid residue in the molecular species containing cis proline was obtained from ¹H nmr studies. However, the cis:trans ratio of the Ala-Pro bond was not affected by N-methylation of the penultimate amino acid residue, which prevents formation of this hydrogen bond. Overall the experimental observations lead to the conclusion that the relative energies of the peptide conformations including cis or trans proline are mainly determined by intramolecular electrostatic interactions, whereas in the molecules considered, intramolecular hydrogen bonding is a consequence of specific peptide backbone conformations rather than a cause for the occurrence of energetically favored species. Independent support for this conclusion was obtained from model consideration which indicated that electrostatic interactions between the terminal carboxylic acid group and the carbonyl oxygen of the penultimate amino acid residue could indeed account for the observed relative conformational energies of the species containing cis and trans proline, respectively.     

The X-Pro peptide bond as an nmr probe for conformational studies of flexible linear peptides

The equilibrium between the cis and trans forms of X-Pro peptide bonds can readily be measured in the ¹³C nmr spectra. In the present paper we investigate how observation of this equilibrium could be used as an nmr probe for conformational studies of flexible polypeptide chains. The experiments include studies by ¹³C nmr of a series of linear oligopeptides containing different X-L -Pro peptide bonds, with X = Gly, L -Ala, L -Leu, L -Phe, D -Ala, D -Leu, and D -Phe. Overall the study confirms that X-Pro peptide bonds can generally be useful as ¹³C nmr probes reporting the formation of nonrandom conformation in flexible polypeptide chains. It was found that the cis–trans equilibrium of X-Pro is greatly affected by the side chain of X and the configuration of the α-carbon atom of X. On the basis of these observations some general rules are suggested for a practical applications of the X-Pro nmr probes in conformational studies of polypeptide chains.     

Conformational energy studies on N-methylated analogs of thyrotropin releasing hormone, enkephalin, and luteinizing hormone-releasing hormone

Empirical conformational energy calculations have been carried out for N-methyl derivatives of alanine and phenylalanine dipeptide models and N-methyl-substituted active analogs of three biologically active peptides, namely thyrotropin-releasing hormone (TRH), enkephalin (ENK), and luteinizing hormone-releasing hormone (LHRH). The isoenergetic contour maps and the local dipeptide minima obtained, when the peptide bond (ω) preceding the N-methylated residue is in the trans configuration show that (1) N-methylation constricts the conformational freedom of both the ith and (i + 1)th residues; (2), the lowest energy position for both residues occurs around ? = ?135° ± 5° and ψ = 75° ± 5°, and (3) the α_L conformational state is the second lowest energy state for the (i + 1)th residue, whereas for the ith residue the C₅ (extended) conformation is second lowest in energy. When the peptide bond (ω_i) is in the cis configuration the ith residue is energetically forbidden in the range ? = 0° to 180° and ψ = ?180° to +180°. Conformations of low energy for ω_i = 0° are found to be similar to those obtained for the trans peptide bond. In all the model systems (irrespective of cis or trans), the α_R conformational state is energetically very high. Significant deviations from planarity are found for the peptide bond when the amide hydrogen is replaced by a methyl group. Two low-energy conformers are found for [(N-Me)His²]TRH. These conformers differ only in the ? and ψ values at the (N-Me)His² residue. Among the different low-energy conformers found for each of the ENK analogs [D -Ala²,(N-Me)Phe⁴, Met⁵]ENK amide and [D -Ala²,(N-Me)Met⁵]ENK amide, one low-energy conformer was found to be common for both analogs with respect to the side-chain orientations. The stability of the low-energy structures is discussed in the light of the activity of other analogs. Two low-energy conformers were found for [(N-Me)Leu⁷]LHRH. These conformations differ in the types of bend around the positions 6 and 7 of LHRH. One bend type is eliminated when the active analog [D -Ala⁶,(M-Me)Leu⁷]LHRH is considered.     

Cis-trans isomerization of the Epstein-Barr virus determinant peptide EENLLDFVRF after the DM1 TCR recognition of the HLA-B*4405/peptide complex

The Epstein–Barr virus determinant peptide EENLLDFVRF shows high immunogenicity when presented by HLA-B*4405 allotype. This fact is accompanied by a cis–trans isomerization of the Leu5-Asp6 peptide bond upon TCR binding of the pMHC complex. Molecular dynamics simulations of pMHC/TCR structures, with the EENLLDFVRF peptide in cis and trans conformations have been employed in order to examine the structure and dynamics of the pMHC complex with such an unusual conformation. The results, based on MM-PBSA free energy computations as well as buried surface area analysis and interactions at the pMHC/TCR interface, indicate that the TCR binds preferably the pMHC complex with the Leu5-Asp6 peptide bond in cis conformation. It is the first time that this notable conformational feature of T-cell epitope is investigated.     

Structural role of a conserved active site cis proline in the Thermotoga maritima acetyl esterase from the carbohydrate esterase family 7

A conserved cis proline residue located in the active site of Thermotoga maritima acetyl esterase (TmAcE) from the carbohydrate esterase family 7 (CE7) has been substituted by alanine. The residue was known to play a crucial role in determining the catalytic properties of the enzyme. To elucidate the structural role of the residue, the crystal structure of the Pro228Ala variant (TmAcE_P228A) was determined at 2.1 Å resolution. The replacement does not affect the overall secondary, tertiary, and quaternary structures and moderately decreases the thermal stability. However, the wild type cis conformation of the 227–228 peptide bond adopts a trans conformation in the variant. Other conformational changes in the tertiary structure are restricted to residues 222–226, preceding this peptide bond and are located away from the active site. Overall, the results suggest that the conserved proline residue is responsible for the cis conformation of the peptide and shapes the geometry of the active site. Elimination of the pyrrolidine ring results in the loss of van der Waals and hydrophobic interactions with both the alcohol and acyl moeities of the ester substrate, leading to significant impairment of the activity and perturbation of substrate specificity. Furthermore, a cis‐to‐trans conformational change arising out of residue changes at this position may be associated with the evolution of divergent activity, specificity, and stability properties of members constituting the CE7 family. Proteins 2017; 85:694–708. © 2016 Wiley Periodicals, Inc.     

β-Alanine containing cyclic peptides with turned structure: The “pseudo type II β-turn.” VI

In the present paper we describe the synthesis, purification, single crystal x-ray analysis, and nmr solution characterization, combined with restrained molecular dynamic simulations, of the cyclic hexapeptide cyclo-(L -Pro-L -Phe-β-Ala)₂. The peptide was synthesized by classical solution methods and the cyclization of the free hexapeptide was accomplished in good yields in diluted methylene chloride solution using N,N-dicyclohexyl-carbodiimide. The compound crystallizes in the monoclinic space group P2₁ from methanol-dichloro-methane solution. The two identical halves of the molecule adopt in the solid state two different conformations. One β-Ala-L -Pro peptide bond is trans, while the second is cis. The molecule is present in dimethylsulfoxide d₆ solutions as a mixture of conformational families. One of these corresponds to a C₂ symmetrical molecule with both β-Ala-Pro cis peptide bonds, while the second major conformation is very similar to that observed in the solid state. All Pro-Phe segments, both in the solid state and the symmetrical and unsym-metrical solution conformations, display ?,ψ angles close to that of position i + 1 and i + 2 of type II β-turns. In addition, the segments preceeded by a trans β-Ala-Pro peptide bond are characterized by a typical i ← i + 3 hydrogen bond, which is absent in the conformer containing a cis β-Ala-Pro peptide bond. The latter conformation corresponds to a new structural domain we define as the “pseudo type II β-turn.” © 1994 John Wiley & Sons, Inc.     

An infrared study on the conformation of poly-L-proline in concentrated aqueous salt solutions

The infrared absorption of poly-L -proline in concentrated aqueous salt solutions was measured in the fundamental region. Of primary interest were the carbonyl absorption of the peptide linkage and the methylene C–H bending absorption of the pyrrolidine ring. These spectral regions each show an additional component in the concentrated salt solutions. Using the position of the absorptions of poly-L -proline I (cis) and II (trans) as models, we conclude that both cis–trans linkages are present in the peptide in salt solutions. Increasing the temperature shifts the equilibrium slightly in favor of cis.     

N-methylleucine gramicidin-S and (di-N-methylleucine) gramicidin-S conformations with cis L-Orn-L-N-MeLeu peptide bonds.

Conformations containing all trans peptide bonds have previously been proposed for N-methylleucine gramicidin-S and (di-N-methylleucine) gramicidin-S based on an evaluation of proton nuclear magnetic resonance parameters in a series of solvents. These gramicidin-S derivatives exhibit full biological activity despite the fact that the proposed solution conformations differ in backbone topology and relative orientation of the Phe and Orn side chains compared to gramicidin-S. The present authors discuss conformations for N-methylleucine gramicidin-S and (di-N-methylleucine) gramicidin-S which incorporate cis peptide bonds at L -Orn-L -N-MeLeu, where the gramicidin-S backbone is essentially retained, and the relative orientation of the Pro, Orn, Val, and Phe side chains correspond to those observed for gramicidin-S. A novel hydrogen-bond arrangement involving one carbonyl group interacting with two peptide protons (1 ←4 and 1 ←5 types) is proposed to stabilize the backbone conformation in the gramicidin-S derivatives. A recent report on the cyclic heptapeptide antibiotic, Ilamycin B₁, shows the presence of cis peptide bonds at N-CH₃ amino acids, as well as the novel hydrogen-bond arrangement presented above.     

Torsional strain considerations in the mechanism of the proteolytic enzymes,with particular application to carboxypeptidase A

Torsional deformation of the peptide linkage by anti distortion of cis substituents (i.e., forcing groups attached to one side of an amide partial π bond out of plane in opposite directions) leads to rehybridization of the constituent atoms (nitrogen and carbonyl carbon) toward tetrahedral geometry. In consequence the partial π bond is uniquely activated toward trans (antarafacial) addition with defined steric orientation of addends. Application of these considerations to the known structure of an enzyme-substrate complex of carboxypeptidase A leads to a unique mechanistic hypothesis for proteolytic cleavage by this enzyme. Extant evidence concerning the mode of catalysis is considered in light of a mechanism involving electrostatically induced torsional activation of the scissile peptide bond, Lewis acid coordination of zinc to amide carbonyl, proton donation from Glu 270 to the amide nitrogen of the scissile bond, with concerted attack upon the amide carbonyl by solvent water.     

Photoresponsive polymers: Azobenzene-containing poly(L-lysine)

Poly(L -lysine) was reacted with various azo-reagents, including p-phenylazobenzoic acid, p-phenylazobenzoyl chloride, and p-phenylazobenzoic N-hydroxy-succinimide ester, to give polypeptides containing 5–44 mol % azobenzene units in the side chains. The conformation of the azo-modified polypeptides was investigated in connection with their photochromic behavior caused by the trans ? cis photoisomerization of the azo groups present in the side chains. In methanol/water solvent mixture, the 20% azo-poly(L -lysine) adopts the α-helix conformation. The helix stability was found to be higher when the azo side chains are in cis than when they are in trans configuration. So irradiation at 340 nm (trans-to-cis isomerization), and alternately at 450 nm (cis-to-trans isomerization), produced reversible variations of the α-helix content. In hexafluoro-2-propanol/water/sodium dodecyl sulfate mixture, the 43% azo-poly(L -lysine) adopts a β-structure, as indicated by CD spectra. Irradiation at 340 nm caused the disruption of the β-structure and promoted the α-helix conformation. The effect was reversed upon irradiation at 450 nm. The photoinduced β ? helix change was explained on the basis of the different geometry and hydrophobic character of the trans and the cis azobenzene units.     

Pyrazole amino acids: hydrogen bonding directed conformations of 3‐amino‐1H‐pyrazole‐5‐carboxylic acid residue

A series of model compounds containing 3‐amino‐1H‐pyrazole‐5‐carboxylic acid residue with N‐terminal amide/urethane and C‐terminal amide/hydrazide/ester groups were investigated by using NMR, Fourier transform infrared, and single‐crystal X‐ray diffraction methods, additionally supported by theoretical calculations. The studies demonstrate that the most preferred is the extended conformation with torsion angles ? and ψ close to ±180°. The studied 1H‐pyrazole with N‐terminal amide/urethane and C‐terminal amide/hydrazide groups solely adopts this energetically favored conformation confirming rigidity of that structural motif. However, when the C‐terminal ester group is present, the second conformation with torsion angles ? and ψ close to ±180° and 0°, respectively, is accessible. The conformational equilibrium is observed in NMR and Fourier transform infrared studies in solution in polar environment as well as in the crystal structures of other related compounds. The observed conformational preferences are clearly related to the presence of intramolecular interactions formed within the studied residue. Copyright © 2017 European Peptide Society and John Wiley & Sons, Ltd.     

Comprehensive Chiroptical Study of Proline‐Containing Diamide Compounds

The continuously growing interest in the understanding of peptide folding led to the conformational investigation of methylamides of N‐acetyl‐amino acids as diamide models. Here we report the results of detailed conformational analysis on Ac‐Pro‐NHMe and Ac‐β‐HPro‐NHMe diamides. These compounds were analyzed by experimental and computational methods, the conformational distributions obtained by Density Functional Theory (DFT) calculations for isolated and solvated diamide compounds are discussed. The conformational preference of proline‐containing diamide compounds as a function of the ambience was observed by a number of chiroptical spectroscopic techniques, such as vibrational circular dichroism (VCD), electronic circular dichroism (ECD), Raman optical activity (ROA) spectroscopy, and additionally by single crystal X‐ray diffraction analyses. Based on a comparison between Ac‐Pro‐NHMe and Ac‐β‐HPro‐NHMe, one can conclude that due to the greater conformational freedom of the β‐HPro derivative, Ac‐β‐HPro‐NHMe shows different behavior in solid‐ and solution‐phase, as well. Ac‐β‐HPro‐NHMe tends to form cis Ac‐β‐HPro amide conformation in water, dichloromethane, and acetonitrile in contrast to its α‐Pro analog. On the other hand, the crystal structure of the β‐HPro compound cannot be related to any of the conformers obtained in vacuum and solution while the X‐ray structure of Ac‐Pro‐NHMe was identified as tα_L–, which is a trans Ac‐Pro amide containing conformer also predominant in polar solvents. Chirality 26:228–242, 2014. © 2014 Wiley Periodicals, Inc.     

Conformational analysis of oxidized peptide fragments of the C‐terminal redox center in thioredoxin reductases by NMR spectroscopy

Vicinal disulfide rings (VDRs) occur when a disulfide bond forms between adjacent cysteine residues in a protein and results in a rare eight‐membered ring structure. This eight‐membered ring has been found to exist in four major conformations in solution, divided between cis and trans conformers. Some selenoenzymes use a special type of VDR in which selenium replaces sulfur, generating a vicinal selenosulfide ring (VSeSR). Here, we provide evidence that this substitution reduces ring strain, resulting in a strong preference for the trans conformation relative to cis in a VSeSR (cis:trans – 9:91). This was determined by using the ‘γ‐gauche effect’, which makes use of both ¹H‐NMR and two‐dimensional (2D) NMR techniques for determining the amide bond conformeric ratio. The presence of selenium in a VSeSR also lowers the dihedral strain energy (DSE) of the selenosulfide bond relative to the disulfide bond of VDRs. While cis amide geometry decreases strain on the amide bond, it increases strain on the scissile disulfide bond of the VDR found in thioredoxin reductase from Drosophila melanogaster (DmTR). We hypothesize that the cis conformation of the VDR is the catalytically competent conformer for thiol/disulfide exchange. This hypothesis was investigated by computing the DSE of VDR and VSeSR conformers, the structure of which was determined by 2D NMR spectroscopy and energy minimization. The computed values of the VDR from DmTR are 16.5 kJ/mol DSE and 14.3 kJ/mol for the C+ and T? conformers, respectively, supporting the hypothesis that the enzyme uses the C+ conformer for thiol/disulfide exchange. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.     

Stereochemical studies on cyclic peptides. IX. Conformational studies on cyclic tetrapeptides containing alternating cis and trans peptide units

Conformational analyses of cyclic tetrapeptides consisting of alternating cis and trans peptide units have been made using contact criteria and energy calculations. This study has been restricted to those structures having a symmetry element in the backbone ring, such as a twofold axis (d) or a center of inversion (i). There are five main results. (1) There are two distinct types of conformations, which are stereochemically favorable corresponding to each of twofold and inversion-symmetrical structures, designated as d₁, d₂ (for twofold symmetrical) and i₁, i₂ (for inversion-symmetrical). Among these, the i₁ type has the lowest energy when glycyl residues occur at all four α-carbon atoms. (2) With the glycyl residue at all four α-carbon atoms, methyl substitution at the cis peptide nitrogen atoms is possible in all the four types, whereas the substitution at trans peptide nitrogen atoms is possible only for the i₁ type. Thus only in the i₁ type can all the nitrogen atoms be methylated simultaneously. The conformation of the molecule in the crystal structure of cyclotetrasarcosyl belongs to the i₁ type. (3) When alanyl residues occur at all four α-carbon atoms, the possible symmetrical type is dependent on the enantiomorphic form and the actual sequence of the alanyl residues. (4) The methyl substitution at peptide nitrogen atoms for cyclic tetrapeptides having alanyl residues causes more stereochemical restriction in the allowed conformations than with glycyl residues. (5) The prolyl residue can be incorporated favorably at the cis-trans junction of both d and i types of structures. The results of the present study are compared with the data on cyclic tetrapeptides available from the crystal structure and nmr studies. The results show an overall agreement both regarding the type of symmetry and the conformational parameters.     

Isolated α-turns in peptides: a selected literature survey

The results of classifying into various types the 68 examples of isolated α-turns in the X-ray diffraction crystal structures of peptides documented in the literature are presented and discussed in this review article. α-Turns characterized by the trans disposition of all ω torsion angles are common for the backbone linear peptides investigated. In contrast, the cis arrangement of the N-terminal (ω_{i + 1}) torsion angle, among those generated by the three residues internal to the α-turn, is a peculiar feature of 65% of the cyclic peptides. Among linear and cyclic peptides featuring the all-trans disposition of the ω torsion angles, only one third of the α-turns display φ,ψ values not too far from those characterizing regular α-helices. In general, our findings, taken together, suggest that a significant conformational diversity is compatible with the formation of an intramolecularly H-bonded C₁₃-member pseudocycle (α-turn) in linear and cyclic peptides.     

Cation binding cyclic peptides composed of imino acid residues

Cyclo(L -Pro-Sar)_n (n = 2–4) with moderate flexibility and hydrophobicity of molecular structure was synthesized, and the characteristics of these cyclic peptides and their metal complexes in acetonitrile were investigated in connection with the residual properties using ¹³C-nmr measurements. The cyclic tetrapeptide cyclo(L -Pro-Sar)₂ showed a sterically hindered phenomenon in acetonitrile in which the amide backbone adopted a cis-trans-cis-trans sequence. The cyclic hexapeptide cyclo(L -Pro-Sar)₃ existed as a mixture of several conformers whose interconversion is slow on the nmr time scale, including cis-cis-trans and/or cis-trans-trans arrangement of the Sar-Pro bond. Finally, it was demonstrated that the cyclic octapeptide cyclo(L -Pro-Sar)₄ behaved as a mixture of multiple conformers which allowed for cis-trans isomerism about the Pro-Sar peptide bond, of which 20–30% had the all-cis Sar-Pro bond isomer and the remaining 70–80% had one (or more) cis Sar-Pro bond isomer. ¹³C-nmr spectra also demonstrated that cyclo(L -Pro-Sar)_n (n = 3,4) formed a 1:1 ion complex whose conformation was characterized by an all-trans peptide bond in the presence of excess metal salt. Cation binding studies, using CD measurements, established that the ion selectivity of cyclo(L -Pro-Sar)₄ in acetonitrile decreased in the order, Ba²⁺ > Ca²⁺ > Na⁺ > Mg²⁺ > Li⁺.     

Conformational energy calculations on glycosylated turns in glycoproteins

Analysis of the amino acid sequence of glycoproteins has suggested the β-turn as a likely site of glycosylation in glycoproteins. According to this model, the peptide chain traverses the interior of a globular protein, reversing its direction at the protein surface, a likely point for the attachment of hydrophilic carbohydrate residues. In order to search for plausible conformations of glycosylated β-turns in asparagine-linked glycoproteins, we have adapted the conformational energy calculation method of Scheraga and coworkers for use in carbohydrates. The parameters for nonbonded and hydrogen-bonded interactions have been published, and electrostatic parameters are derived from a CNDO calculation on a model glycopeptide. Our results indicate that the orientation of the glycosyl amide bond having the amide proton nearly trans to the anomeric proton of the sugar has the lowest energy. Although CD and nmr experiments in our laboratory have consistently found this conformation, our calculations show the conformation having these two protons in a cis relationship to lie very close in energy. Calculations on the glycopeptide linkage model, α-N-acetyl, δ-N(2-acetamido-1,2-dideoxy-β-D -glucopyranosyl)-N′-methyl-L -asparaginyl amide show that several distinct geometries are allowed for glycosylated β-turns. For a type I β-turn, three conformations of the glycosylated side chain are found within 4 kcal of the minimum, while two conformations of the glycosylated side chain are allowed for a type II turn. The hydrogen-bonded C7 conformation is also allowed. Stereoviews of the low-energy conformations reveal no major hydrogen-bonding interaction between the peptide and sugar.