Coexpression of Genetically Engineered 3-Ketoacyl-ACP Synthase III (fabH) and Polyhydroxyalkanoate Synthase (phaC) Genes Leads to Short-Chain-Length-Medium-Chain-Length Polyhydroxyalkanoate Copolymer Production from Glucose in Escherichia coli JM109

Polyhydroxyalkanoates (PHAs) can be divided into three main types based on the sizes of the monomers incorporated into the polymer. Short-chain-length (SCL) PHAs consist of monomer units of C₃ to C₅, medium-chain-length (MCL) PHAs consist of monomer units of C₆ to C₁₄, and SCL-MCL PHAs consist of monomers ranging in size from C₄ to C₁₄. Although previous studies using recombinant Escherichia coli have shown that either SCL or MCL PHA polymers could be produced from glucose, this study presents the first evidence that an SCL-MCL PHA copolymer can be made from glucose in recombinant E. coli. The 3-ketoacyl-acyl carrier protein synthase III gene (fabH) from E. coli was modified by saturation point mutagenesis at the codon encoding amino acid 87 of the FabH protein sequence, and the resulting plasmids were cotransformed with either the pAPAC plasmid, which harbors the Aeromonas caviae PHA synthase gene (phaC), or the pPPAC plasmid, which harbors the Pseudomonas sp. strain 61-3 PHA synthase gene (phaC1), and the abilities of these strains to accumulate PHA from glucose were assessed. It was found that overexpression of several of the mutant fabH genes enabled recombinant E. coli to induce the production of monomers of C₄ to C₁₀ and subsequently to produce unusual PHA copolymers containing SCL and MCL units. The results indicate that the composition of PHA copolymers may be controlled by the monomer-supplying enzyme and further reinforce the idea that fatty acid biosynthesis may be used to supply monomers for PHA production.     

Pseudomonas sp. Strain 273, an Aerobic α,ω-DichloroalkaneDegrading Bacterium

A gram-negative, aerobic bacterium was isolated from soil; this bacterium grew in 50% (vol/vol) suspensions of 1,10-dichlorodecane (1,10-DCD) as the sole source of carbon and energy. Phenotypic and small-subunit ribosomal RNA characterizations identified the organism, designated strain 273, as a member of the genus Pseudomonas. After induction with 1,10-DCD, Pseudomonas sp. strain 273 released stoichiometric amounts of chloride from C₅ to C₁₂ α,ω-dichloroalkanes in the presence of oxygen. No dehalogenation occurred under anaerobic conditions. The best substrates for dehalogenation and growth were C₉ to C₁₂ chloroalkanes. The isolate also grew with nonhalogenated aliphatic compounds, and decane-grown cells dechlorinated 1,10-DCD without a lag phase. In addition, cells grown on decane dechlorinated 1,10-DCD in the presence of chloramphenicol, indicating that the 1,10-DCD-dechlorinating enzyme system was also induced by decane. Other known alkane-degrading Pseudomonas species did not grow with 1,10-DCD as a carbon source. Dechlorination of 1,10-DCD was demonstrated in cell extracts of Pseudomonas sp. strain 273. Cell-free activity was strictly oxygen dependent, and NADH stimulated dechlorination, whereas EDTA had an inhibitory effect.     

Biosynthesis of multicomponent polyhydroxyalkanoates by <Emphasis Type="Italic">Wautersia eutropha</Emphasis>

The effect of carbon supply on polyhydroxyalkanoate (PHA) synthesis by bacteria Wautersia eutropha was studied. Synthesis of multicomponent PHA composed of short-and long-chain monomers (C₄–C₈) by two natural strains (H16 and B5786) under mixotrophic conditions (CO₂ + alkanoic acids as cosubstrates) was demonstrated for the first time. The PHA composition was shown to be dependent on the cosubstrate type. In the presence of odd fatty acids, four-and five-component polymers were synthesized; hydroxybutyrate, hydroxyvalerate, and hydroxyheptanoate were the major monomers, while hydroxyhexanoate and hydroxyoctanoate were minor. In the presence of even fatty acids, PHA contained not only the corresponding molecules (hydroxyhexanoate and hydroxyoctanoate), but also hydroxyvalerate; synthesis of four-component PHA which contain mainly hydroxybutyrate and hydroxyhexanoate (up to 18 mol %) is therefore possible. A series of four-and five-component PHA was synthesized and their physicochemical characteristics were determined.     

Bioremediation of volatile oil hydrocarbons by epiphytic bacteria associated with American grass (Cynodon sp.) and broad bean (Vicia faba) leaves

Fresh leaves of American grass and broad beans grown in pristine soil were naturally colonized with cultivable volatile oil hydrocarbon-utilizing bacteria, whose numbers increased significantly in plants grown in oily soil. According to their 16S rRNA gene sequences those bacteria were affiliated to various species of the genera Rhodococcus and Pseudomonas. Qualitative growth studies revealed that pure cultures of these phyllospheric bacteria could grow successfully on a solid mineral medium containing individual alkanes with chain lengths of C₉ through C₄₀ and the aromatics phenanthrene, naphthalene, and biphenyl as sole sources of carbon and energy. Quantitative measurements showed that the individual pure bacterial isolates degraded between about 20 and 30% of crude oil, n-hexadecane, or phenanthrene in batch culture after a one-week incubation. These results reflect the high hydrocarbon degradation potential of those bacteria. The isolates were diazotrophic (nitrogen fixers), meaning that they were self-dependent in covering their nitrogen requirements. Incubating fresh leaves in closed microcosms containing volatile oil hydrocarbons resulted in up to more than 80% attenuation of these compounds after two weeks. Experimental evidence was provided that the leaf tissues did not contribute to this attenuation, which was exclusively due to the bacterial activity.     

Isolation and characterization of bacteria capable of metabolizing lignin-derived low molecular weight compounds

Lignin, a major component of biomass, composed of homogeneous phenolic monomers and functions as a synthetic precursor in the production of specialty chemicals or polymers. In this study, bacterial strains that metabolize lignin-derived low molecular weight compounds (LLCs) were cultured which are capable of LLC bioconversion. We used an LLC mixture primarily composed of vanillin (VL), syringaldehyde (SA), vanillic acid (VA) and p-hydroxybenzoic acid which were prepared from a commercial alkaline lignin product. Enrichment culture was repeated twice in a medium containing the soil sample, the LLCs and inorganic salts. Three bacterial strains belonging to the genera Pseudomonas, Ochrobactrum, and Klebsiella were isolated. We found that only VL, SA, and VA were metabolized by the Pseudomonas strain, which was then found to grow in a medium with VL or VA as the sole source of carbon and energy. The VL isomers, namely, ovanillin and isovanillin were converted to the corresponding carboxylic acids but were not utilized as carbon sources by Pseudomonas. VL and VA are intermediates in the pathway of bacterial degradation of eugenol via ferulic acid. Several bacterial strains that metabolize VL, eugenol, and ferulic acid have been reported but such strains are rarely isolated from enrichment culture medium containing LLCs, due to insufficient induction by the precursors in the LLC medium. In this study, we demonstrated that the microorganisms involved in the bioconversion of LLCs can be isolated from simple enrichment culture.     

Substrate specificity of a long-chain alkylamine-degrading <Emphasis Type="Italic">Pseudomonas</Emphasis> sp isolated from activated sludge

A bacterium strain BERT, which utilizes primary long-chain alkylamines as nitrogen, carbon and energy source, was isolated from activated sludge. This rod-shaped motile, Gram-negative strain was identified as a Pseudomonas sp. The substrate spectrum of this Pseudomonas strain BERT includes primary alkylamines with alkyl chains ranging from C₃ to C₁₈, and dodecyl-1,3-diaminopropane. Amines with alkyl chains ranging from 8 to 14 carbons were the preferred substrates. Growth on dodecanal, dodecanoic acid and acetic acid and simultaneous adaptation studies indicated that this bacterium initiates degradation through a C_alkyl–N cleavage. The cleavage of alkylamines to the respective alkanals in Pseudomonas strain BERT is mediated by a PMS-dependent alkylamine dehydrogenase. This alkylamine dehydrogenase produces stoichiometric amounts of ammonium from octylamine. The PMS-dependent alkylamine was found to oxidize a broad range of long-chain alkylamines. PMS-dependent long-chain aldehyde dehydrogenase activity was also detected in cell-free extract of Pseudomonas strain BERT grown on octylamine. The proposed pathway for the oxidation of alkylamine in strain BERT proceeds from alkylamine to alkanal, and then to the fatty acid.     

Alkane assimilation ability of Pseudomonas C12B originally isolated for degradation of alkyl sulfate surfactants

Summary Pseudomonas C12B (NCIMB 11753) is able to utilize a broad range of alkyl sulfates. The growth on n-alkanes of different chain lenght (C₆–C₁₆) was tested. Pseudomonas C12B assimilated hydrocarbons from C₉–C₁₆. Growth rate on n-decane (1%) that was chosen as the typical sole source of carbon and energy depended on oxygen supply. The addition of surfactants (Triton X-100 and Tween-80) in a nontoxic concentrations resulted in increased biomass yield. Under optimal growth conditions Pseudomonas C12B exhibited the maximal growth rate and yield with C₁₁ as the sole carbon source.     

Agro-industrial oily wastes as substrates for PHA production by the new strain Pseudomonas aeruginosa NCIB 40045: Effect of culture conditions

Production of poly(3-hydroxyalkaonates) (PHA) by Pseudomonas aeruginosa 42A2 from agro-industrial oily wastes was studied. PHA accumulation, throughout the cell cycle, was observed as intracellular accumulation associated to polyphosphate granules. A 54.6% PHA accumulation was obtained when technical oleic acid (TOA) was used as carbon source. Molecular weight of the polymer was 54.7 Da. The polymer was amorphous, with glass transition at −47.5 °C and thermal degradation at 293 °C. PHA production and monomer composition were affected by K_La and temperature. The most relevant characteristic of the polymer produced at low aeration rates (K_La, 0.06 s⁻¹) were the unusual C_14:2 (13%) and the increase of C_12:1 (42.2%). The highest amount of unsaturated monomers was found in the polymer produced at 18 °C (64.4%).PHA accumulation ranged between 66.1% when waste-free fatty acids from soybean oil (WFFA) were used as carbon substrate, 29.4% when waste frying oil (WFO) was used and 16.8% when glucose was used. Depending on the substrate supplied a wide range of components was observed. Major saturated or unsaturated components of the polymer found were C_10:0, C_12:0 and C_8:0 or C_12:1 and C_14:1, respectively. When glucose was used as carbon substrate C_9:0, C_11:0 and C_16:0 were found.     

Bacterial Growth as a Practical Indicator of Extensive Biodegradability of Organic Compounds

The proportionality of growth, as indicated by turbidity of cultures of Pseudomonas C12B, to the initial concentration of sodium dodecyl sulfate, dodecanol, or a mixture of C₁₀-C₂₀ secondary alcohol sulfates, each provided as sole carbon source in basal mineral salts medium, was demonstrated. Subsequently, the direct correlation of culture turbidity as a growth indicator and degradation of sodium dodecyl sulfate and the C₁₀-C₂₀ compounds was established. Degradation of these detergents was measured by the rise in surface tension and the decrease in methylene blue values, respectively. Turbidimetry was found to be a poor indicator of degradation of dodecanol in the early hours of culture, however, and did not correlate over a significant range with degradation of substrate. Viable cell counts did parallel dodecanol degradation as measured by gas-liquid chromatography. The use of bacterial growth as a reliable, quantitative, and easily measured parameter indicating biodegradability was suggested for those organic compounds which can be shown to serve as a carbon source for a bacterium.     

Biosynthesis of copolyesters consisting of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids from 1,3-butanediol or from 3-hydroxybutyrate by Pseudomonas sp. A33

Pseudomonas sp. A33 and other isolates of aerobic bacteria accumulated a complex copolyester containing 3-hydroxybutyric acid (3HB) and various medium-chain-length 3-hydroxyalkanoic acids (3HA_MCL) from 3-hydroxybutyric acid or from 1,3-butanediol under nitrogen-limitated culture conditions. 3HB contributed to 15.1 mol/100 mol of the constituents of the polyester depending on the strain and on the cultivation conditions. The accumulated polymer was a copolyester of 3HB and 3HA_MCL rather than a blend of poly(3HB) and poly(3HA_MCL) on the basis of multiple evidence. 3-Hydroxyhexadecenoic acid and 3-hydroxyhexadecanoic acid were detected as constituents of polyhydroxyalkanoates, which have hitherto not been described, by¹³C nuclear magnetic resonance or by gas chromatography/mass spectrometric analysis. In total, ten different constituents were detected in the polymer synthesized from 1,3-butanediol by Pseudomonas sp. A33:besides seven saturated (3HB, 3-hydroxyhexanoate, 3-hydroxyoctanoate, 3-hydroxydecanoate, and 3-hydrohexadecanoate) three unsaturated (3-hydroxydodecenoate, 3-hydroxytetradecenoate and 3-hydrohexadecanoate) hydroxyalkanoic acid constituents occured. The polyhydroxyalkanoate synthase of Pseudomonas sp. A33 was cloned, and its substrate specificity was evaluated by heterologous expression in various strains of P. putida, P. oleovorans and Alcaligenes eutrophus.     

Biosynthesis of poly(2-hydroxybutyrate-co-lactate) in metabolically engineered <Emphasis Type="Italic">Escherichia coli</Emphasis>

We have previously reported in vivo biosynthesis of polyhydroxyalkanoates containing 2-hydroxyacid monomers such as lactate and 2-hydroxybutyrate in recombinant Escherichia coli strains by the expression of evolved Clostridium propionicum propionyl-CoA transferase (PctCp) and Pseudomonas sp. MBEL 6-19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1 _Ps6-19). Here, we report the biosynthesis of poly(2-hydroxybutyrate-co-lactate)[P(2HB-co-LA)] by direct fermentation of metabolically engineered E. coli strain. Among E. coli strains WL3110, XL1-Blue, and BL21(DE3), recombinant E. coli XL1-Blue strain expressing PhaC1437 and Pct540 produced P(76.4mol%2HB-co-23.6mol%LA) to the highest content of 88 wt% when it was cultured in a chemically defined medium containing 20 g/L of glucose and 2 g/L of sodium 2-hydroxybutyrate. When recombinant E. coli XL1-Blue strain expressing PhaC1437 and Pct540 was cultured in a chemically defined medium containing 20 g/L of glucose and varying concentration of sodium 2-hydroxybutyrate, 2HB monomer fraction in P(2HB-co-LA) increased proportional to the concentration of sodium 2-hydroxybutyrate added to the culture medium. P(2HB-co-LA)] could also be produced from glucose as a sole carbon source without sodium 2-hydroxybutyrate into the culture medium. Recombinant E. coli XL1-Blue strain expressing the phaC1437, pct540, cimA3.7, and leuBCD genes together with the L. lactis Il1403 panE gene, successfully produced P(23.5mol%2HB-co-76.5mol%LA)] to the polymer content of 19.4 wt% when it cultured in a chemically defined medium containing 20 g/L of glucose. The metabolic engineering strategy reported here should be useful for the production of novel copolymer P(2HB-co-LA)].     

Nitrosubstituted Aromatic Compounds as Nitrogen Source for Bacteria

Bacteria which utilized nitroaromatic compounds (0.5 mM) as sole source of nitrogen were isolated from soil. With 2,6-dinitrophenol and succinate as carbon source, a Pseudomonas strain was isolated which liberated and assimilated nitrite. Approximately 2 mol of NO₂⁻ per mol of 2,6-dinitrophenol was released by resting cells. The xenobiotic compound was totally degraded, although specific growth yields were low even with succinate as a carbon source.     

Improving carbon and energy distribution by coupling growth and medium chain length polyhydroxyalkanoate production from fatty acids by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

The production of medium chain length polyhydroxyalkanoates by Pseudomonas putida KT2440 from fatty acids leads to the loss of a large proportion of carbon. We studied the possibility of a shift of potentially available energy and carbon towards monitored residual growth during the production phase. A Fed-Batch culture achieving 125.6 g/L of total biomass containing 54.4% (g/g) of medium chain length polyhydroxyalkanoates was carried out leading to an overall experimental carbon yield of 0.7 Cmole/Cmole. The analysis of modeling fluxes deduced from experimental data indicated how carbon and reduced cofactors (NADH and FADH₂) were managed to conclude that part of the carbon and reduced cofactors made available by polymer production were used in anabolic pathways. The strategy which consisted in coupled growth and medium chain length polyhydroxyalkanoate production enhanced the global yields compared to growth followed by a production phase. The understanding of carbon and energy fluxes distribution allowed deducing optimized culture strategy to perform the highest reported in the literature.     

Use of sodium dodecyl sulphate for stimulation of biodegradation of n-alkanes without residual contamination by the surfactant

The capacity of a range of aliphatic alkanes (C₆–C₁₆), intermediates of n-decane oxidation and sodium dodecyl sulphate (SDS) to induce decane-mineralization activity in the cells of Pseudomonas C12B was compared with that for n-decane. The comparison on quantitative basis had two serious limitations: low solubility of tested inducers in aqueous solutions and their toxicity to bacterial cells. Carbon chain length and the presence of hydroxyl group were the important factors for induction activity. However, presence of hydroxyl groups at both ends of alkyl chain prevented the induction of decane-mineralization activity. Good induction activity by SDS was caused either by the presence of free end of alkyl chain, or by bacterial hydrolysis of sulphate group to yield alcohol, which in turn served as true inducer. The presence of SDS in the culture medium with n-decane as main source of carbon and energy accelerated the growth of Pseudomonas C12B. SDS disappeared from the culture medium in early stages of cultivation suggesting preferential degradation by the bacterium, while the consumption of n-decane was accelerated. This may be associated with the capacity of SDS to induce decane-mineralization system in Pseudomonas C12B and/or with the ability of SDS to stimulate the surface attachment of competent bacteria resulting in the close proximity of the cells with alkane droplets, and thus, enhanced breakdown of the hydrocarbon pollutant.     

Bacterial synthesis of polyhydroxyalkanoates containing aromatic and aliphatic monomers by Pseudomonas putida CA-3

Pseudomonas putida CA-3 has the ability to accumulate to high levels unique polyhydroxyalkanoate (PHA) heteropolymers composed of aromatic and aliphatic monomers. The majority of monomers are aromatic making up 98% of the polymer. (R)-3-hydroxyphenylvalerate and (R)-3-hydroxyphenylhexanoate are the most abundant monomers found in polymers accumulated from phenylalkanoic acids with an uneven and even number of carbons on the acyl side chain respectively. PHAs accumulated from phenylvaleric and phenylhexanoic acid were partially crystalline while all other PHAs were amorphous. Significant differences in the yield and PHA content of the cells occurred when different phenylalkanoic acids were supplied as growth substrates. Increasing the initial concentration of the growth substrate increased both the PHA content of the cells and the overall yield (g PHA/g carbon supplied) of PHA accumulated by P. putida CA-3 cells. The highest PHA content (% cell dry wt.) from an aromatic carbon source was 59% when 15mM phenylvaleric acid was supplied as the sole source of carbon and energy. This corresponded to a maximum PHA yield of 0.42 g PHA/g carbon supplied. In and attempt to increase the level of PHA accumulated from related growth substrates acrylic acid was added to the growth medium. However, the addition of various concentrations of acrylic acid to the growth medium had either no effect or decreased the PHA content of the cell accumulated from phenylalkanoic acids by P. putida CA-3.     

Polyphosphate Accumulation by Pseudomonas putida CA-3 and Other Medium-Chain-Length Polyhydroxyalkanoate-Accumulating Bacteria under Aerobic Growth Conditions

Pseudomonas putida CA-3 accumulates polyphosphate (polyP) and medium-chain-length polyhydroxyalkanoate (mclPHA) concurrently under nitrogen limitation. Five other mclPHA-accumulating Pseudomonas strains are capable of simultaneous polyP and mclPHA biosynthesis. It appears that polyP is not the rate-limiting step for mclPHA accumulation in these Pseudomonas strains.     

Degradation of tetradecyltrimethylammonium by Pseudomonas putida A ATCC 12633 restricted by accumulation of trimethylamine is alleviated by addition of Al 3+ ions

Aims: To establish if tetradecyltrimethylammonium (TDTMA) might be degraded by pure culture of Pseudomonas strains, and how the presence of a Lewis’ acid in the medium influences its biodegradability. Methods and Results: From different strains of Pseudomonas screened, only Pseudomonas putida A ATCC 12633 grows with 50 mg l^?1 of TDTMA as the sole carbon and nitrogen source. A monooxygenase activity catalyzed the initial step of the biodegradation. The trimethylamine (TMA) produced was used as nitrogen source or accumulated inside the cell. To decrease the intracellular TMA, the culture was divided, and 0·1 mmol l^?1 AlCl₃ added. In this way, the growth and TDTMA consumption increased. The internal concentration of TMA, determined using the fluorochrome Morin, decreased by the formation of Al³⁺ : TMA complex. Conclusions: Pseudomonas putida utilized TDTMA as its sole carbon and nitrogen source. The TMA produced in the initial step of the biodegradation by a monooxygenase activity was used as nitrogen source or accumulated inside the cell, affecting the bacterial growth. This effect was alleviated by the addition of AlCl₃. Significance and Impact of the Study: The use of Lewis’ acids to sequester intracellular amines offers an alternative to achieve an efficient utilization of TDTMA by Ps. putida.     

Production of a novel copolyester of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids by Pseudomonas sp. 61-3 from sugars

 Pseudomonas sp. 61-3 (isolated from soil) produced a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA) of C₆, C₈, C₁₀ and C₁₂, when sugars of glucose, fructose and mannose were fed as the sole carbon source. The polyester produced was a blend of homopolymer and copolymer, which could be fractionated with boiling acetone. The acetone-insoluble fraction of the polyester was a homopolymer of 3-hydroxybutyrate units [poly (3HB)], while the acetone-soluble fraction was a copolymer [poly(3HB-co-3HA)] containing both short- and medium-chain-length 3-hydroxyalkanoate units ranging from C₄ to C₁₂:44 mol% 3-hydroxybutyrate, 5 mol% 3-hydroxyhexanoate, 21 mol% 3-hydroxyoctanoate, 25 mol% 3-hydroxydecanoate, 2 mol% 3-hydroxydodecanoate and 3 mol% 3-hydroxy-5-cis-dodecenoate. The copolyester was shown to be a random copolymer of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoate units by analysis of the ¹³C-NMR spectrum. The poly(3HB) homopolymer and poly (3HB-co-3HA) copolymer were produced simultaneously within cells from glucose in the absence of any nitrogen source, which suggests that Pseudomonas sp. 61-3 has two types of polyhydroxy-alkanoate syntheses with different substrate specificities. Received: 9 June 1995/Received last revision: 30 October 1995/Accepted: 6 November 1995     

Physiological and Biochemical Characteristics and Capacity for Polyhydroxyalkanoates Synthesis in a Glucose-Utilizing Strain of Hydrogen-Oxidizing Bacteria, Ralstonia eutropha B8562

The physiological, biochemical, genetic, and cultural characteristics of the glucose-utilizing mutant strain Ralstonia eutropha B8562 were investigated in comparison with the parent strain R. eutropha B5786. The morphological, cultural, and biochemical characteristics of strain R. eutropha B8562 were similar to those of strain R. eutropha B5786. Genetic analysis revealed differences between the 16S rRNA gene sequences of these strains. The growth characteristics of the mutant using glucose as the sole carbon and energy source were comparable with those of the parent strain grown on fructose. Strain B8562 was characterized by high yields of polyhydroxyalkanoate (PHA) from different carbon sources (CO₂, fructose, and glucose). In batch culture with glucose under nitrogen limitation, PHA accumulation reached 90% of dry weight. In PHA, β-hydroxybutyrate was predominant (over 99 mol %); β-hydroxyvalerate (0.25–0.72 mol %) and β-hydroxyhexanoate (0.008–1.5 mol %) were present as minor components. The strain has prospects as a PHA producer on glucose-containing media.