Crystal structure of thymidylate synthase A from Bacillus subtilis

Thymidylate synthase (TS) converts dUMP to dTMP by reductive methylation, where 5,10-methylenetetrahydrofolate is the source of both the methylene group and reducing equivalents. The mechanism of this reaction has been extensively studied, mainly using the enzyme from Escherichia coli. Bacillus subtilis contains two genes for TSs, ThyA and ThyB. The ThyB enzyme is very similar to other bacterial TSs, but the ThyA enzyme is quite different, both in sequence and activity. In ThyA TS, the active site histidine is replaced by valine. In addition, the B. subtilis enzyme has a 2.4-fold greater k(cat) than the E. coli enzyme. The structure of B. subtilis thymidylate synthase in a ternary complex with 5-fluoro-dUMP and 5,10-methylenetetrahydrofolate has been determined to 2.5 A resolution. Overall, the structure of B. subtilis TS (ThyA) is similar to that of the E. coli enzyme. However, there are significant differences in the structures of two loops, the dimer interface and the details of the active site. The effects of the replacement of histidine by valine and a serine to glutamine substitution in the active site area, and the addition of a loop over the carboxy terminus may account for the differences in k(cat) found between the two enzymes.     

Heavy riboflavin synthase from Bacillus subtilis. Crystal structure analysis of the icosahedral beta 60 capsid at 3.3 A resolution

Geometric features as well as possible functional properties of the substrate binding sites at the pentamer interfaces are described. Ligand binding at the pentamer interface regions increases the stability of the beta 60 capsid considerably and influences the reassembly of isolated beta-subunits.     

Crystal structure of the tetrameric cytidine deaminase from Bacillus subtilis at 2.0 A resolution

Cytidine deaminases (CDA, EC 3.5.4.5) are zinc-containing enzymes in the pyrimidine salvage pathway that catalyze the formation of uridine and deoxyuridine from cytidine and deoxycytidine, respectively. Two different classes have been identified in the CDA family, a homodimeric form (D-CDA) with two zinc ions per dimer and a homotetrameric form (T-CDA) with four zinc ions per tetramer. We have determined the first structure of a T-CDA from Bacillus subtilis. The active form of T-CDA is assembled of four identical subunits with one active site apiece. The subunit of D-CDA is composed of two domains each exhibiting the same fold as the T-CDA subunits, but only one of them contains zinc in the active site. The similarity results in a conserved structural core in the two CDA forms. An intriguing difference between the two CDA structures is the zinc coordinating residues found at the N-terminal of two alpha-helices: three cysteine residues in the tetrameric form and two cysteine residues and one histidine residue in the dimeric form. The role of the zinc ion is to activate a water molecule and thereby generate a hydroxide ion. How the zinc ion in T-CDA surrounded with three negatively charged residues can create a similar activity of T-CDA compared to D-CDA has been an enigma. However, the structure of T-CDA reveals that the negative charge caused by the three ligands is partly neutralized by (1) an arginine residue hydrogen-bonded to two of the cysteine residues and (2) the dipoles of two alpha-helices.     

Crystal structure of 4-methyl-5-beta-hydroxyethylthiazole kinase from Bacillus subtilis at 1.5 A resolution

4-Methyl-5-beta-hydroxyethylthiazole kinase (ThiK) catalyzes the phosphorylation of the hydroxyl group of 4-methyl-5-beta-hydroxyethylthiazole (Thz). This enzyme is a salvage enzyme in the thiamin biosynthetic pathway and enables the cell to use recycled Thz as an alternative to its synthesis from 1-deoxy-D-xylulose-5-phosphate, cysteine, and tyrosine. The structure of ThiK in the rhombohedral crystal form has been determined to 1.5 A resolution and refined to a final R-factor of 21. 6% (R-free 25.1%). The structures of the enzyme/Thz complex and the enzyme/Thz-phosphate/ATP complex have also been determined. ThiK is a trimer of identical subunits. Each subunit contains a large nine-stranded central beta-sheet flanked by helices. The overall fold is similar to that of ribokinase and adenosine kinase, although sequence similarity is not immediately apparent. The area of greatest similarity occurs in the ATP-binding site where several key residues are highly conserved. Unlike adenosine kinase and ribokinase, in which the active site is located between two domains within a single subunit, the ThiK active site it formed at the interface between two subunits within the trimer. The structure of the enzyme/ATP/Thz-phosphate complex suggests that phosphate transfer occurs by an inline mechanism. Although this mechanism is similar to that proposed for both ribokinase and adenosine kinase, ThiK lacks an absolutely conserved Asp thought to be important for catalysis in the other two enzymes. Instead, ThiK has a conserved cysteine (Cys198) in this position. When this Cys is mutated to Asp, the enzymatic activity increases 10-fold. Further sequence analysis suggests that another thiamin biosynthetic enzyme (ThiD), which catalyzes the formation of 2-methyl-4-amino-5-hydroxymethylpyrimidine pyrophosphate by two sequential phosphorylation reactions, belongs to the same family of small molecule kinases.     

Crystal structure of beta-amylase from Bacillus cereus var. mycoides at 2.2 A resolution.

The crystal structure of beta-amylase from Bacillus cereus var. mycoides was determined by the multiple isomorphous replacement method. The structure was refined to a final R-factor of 0.186 for 102,807 independent reflections with F/sigma(F) > or = 2.0 at 2.2 A resolution with root-mean-square deviations from ideality in bond lengths, and bond angles of 0.014 A and 3.00 degrees, respectively. The asymmetric unit comprises four molecules exhibiting a dimer-of-dimers structure. The enzyme, however, acts as a monomer in solution. The beta-amylase molecule folds into three domains; the first one is the N-terminal catalytic domain with a (beta/alpha)8 barrel, the second one is the excursion part from the first one, and the third one is the C-terminal domain with two almost anti-parallel beta-sheets. The active site cleft, including two putative catalytic residues (Glu172 and Glu367), is located on the carboxyl side of the central beta-sheet in the (beta/alpha)8 barrel, as in most amylases. The active site structure of the enzyme resembles that of soybean beta-amylase with slight differences. One calcium ion is bound per molecule far from the active site. The C-terminal domain has a fold similar to the raw starch binding domains of cyclodextrin glycosyltransferase and glucoamylase.     

Crystal structure of the alkaline proteinase Savinase from Bacillus lentus at 1.4 A resolution.

Savinase (EC3.4.21.14) is secreted by the alkalophilic bacterium Bacillus lentus and is a representative of that subgroup of subtilisin enzymes with maximum stability in the pH range 7 to 10 and high activity in the range 8 to 12. It is therefore of major industrial importance for use in detergents. The crystal structure of the native form of Savinase has been refined using X-ray diffraction data to 1.4 A resolution. The starting model was that of subtilisin Carlsberg. A comparison to the structures of the closely related subtilisins Carlsberg and BPN' and to the more distant thermitase and proteinase K is presented. The structure of Savinase is very similar to those of homologous Bacillus subtilisins. There are two calcium ions in the structure, equivalent to the strong and the weak calcium-binding sites in subtilisin Carlsberg and subtilisin BPN', well known for their stabilizing effect on the subtilisins. The structure of Savinase shows novel features that can be related to its stability and activity. The relatively high number of salt bridges in Savinase is likely to contribute to its high thermal stability. The non-conservative substitutions and deletions in the hydrophobic binding pocket S1 result in the most significant structural differences from the other subtilisins. The different composition of the S1 binding loop as well as the more hydrophobic character of the substrate-binding region probably contribute to the alkaline activity profile of the enzyme. The model of Savinase contains 1880 protein atoms, 159 water molecules and two calcium ions. The crystallographic R-factor [formula; see text].     

Crystal structure of an alkaline protease from Bacillus alcalophilus at 2.4 A resolution

The crystal structure of an alkaline protease from Bacillus alcalophilus has been determined by X-ray diffraction at 2.4 A resolution. The enzyme crystallizes in space group P2(1)2(1)2(1) with lattice constants a = 53.7, b = 61.6, c = 75.9 A. The structure was solved by molecular replacement using the structure of subtilisin Carlsberg as search model. Refinement using molecular dynamics and restrained least squares methods results in a crystallographic R-factor of 0.185. The tertiary structure is very similar to that of subtilisin Carlsberg. The greatest structural differences occur in loops at the surface of the protein.     

Crystal structure of uroporphyrinogen decarboxylase from Bacillus subtilis

Uroporphyrinogen decarboxylase (UROD) is a branch point enzyme in the biosynthesis of the tetrapyrroles. It catalyzes the decarboxylation of four acetate groups of uroporphyrinogen III to yield coproporphyrinogen III, leading to heme and chlorophyll biosynthesis. UROD is a special type of nonoxidative decarboxylase, since no cofactor is essential for catalysis. In this work, the first crystal structure of a bacterial UROD, Bacillus subtilis UROD (UROD(Bs)), has been determined at a 2.3 A resolution. The biological unit of UROD(Bs) was determined by dynamic light scattering measurements to be a homodimer in solution. There are four molecules in the crystallographic asymmetric unit, corresponding to two homodimers. Structural comparison of UROD(Bs) with eukaryotic URODs reveals a variation of two loops, which possibly affect the binding of substrates and release of products. Structural comparison with the human UROD-coproporphyrinogen III complex discloses a similar active cleft, with five invariant polar residues (Arg29, Arg33, Asp78, Tyr154, and His322) and three invariant hydrophobic residues (Ile79, Phe144, and Phe207), in UROD(Bs). Among them, Asp78 may interact with the pyrrole NH groups of the substrate, and Arg29 is a candidate for positioning the acetate groups of the substrate. Both residues may also play catalytic roles.     

Heavy riboflavin synthase from Bacillus subtilis. Quaternary structure and reaggregation

Heavy riboflavin synthase of Bacillus subtilis was purified by a simplified procedure. The enzyme is a complex protein containing about 3 alpha-subunits (23.5 X 10(3) Mr) and 60 beta-subunits (16 X 10(3) Mr). The 10(6) Mr protein dissociates upon exposure to pH values above neutrality. Phosphate ions increase the stability at neutral pH. The dissociation induced by exposure of the enzyme to elevated pH is reversible in phosphate buffer at neutral pH. The stability of the enzyme at elevated pH values is greatly enhanced by the substrate analogue, 5-nitroso-6-ribitylamino-2,4(1H, 3H)-pyrimidinedione. Electron micrographs of negatively stained enzyme specimens show spherical particles with a diameter of 15.6 nm. Various immunochemical methods show that the alpha-subunits are not accessible to antibodies in the native molecule. The native enzyme is not precipitated by anti-alpha-subunit serum, and riboflavin synthase activity is not inhibited by the serum. However, these tests become positive at pH values that lead to dissociation of the enzyme. Subsequent to dissociation of the native enzyme at elevated pH values, the beta-subunits form high molecular weight aggregates. These aggregates form a complex mixture of different molecular species, which sediment at velocities of about 48 S and 70 S. The average molecular weight was approximately 5.6 X 10(6). Homogeneous preparations have not been obtained. Electron micrographs show hollow, spherical vesicles with diameters of about 29 nm. The substrate analogue 5-nitroso-6-ribitylamino-2,4(1H, 3H)-pyrimidinedione can induce the reaggregation of isolated beta-subunits with formation of smaller molecules, which are structurally similar to native riboflavin synthase. A homogeneous preparation of reaggregated molecules was obtained by renaturation of beta-subunits from 6.4 M-urea in the presence of the ligand. The sedimentation velocity of this aggregate is about 7% smaller than that of the native enzyme. The molecular weight is 96 X 10(4). Electron micrographs show spherical particles with a diameter of about 17.4 nm. Inspection of the micrographs tentatively suggests the presence of a central cavity. It appears likely that these molecules, which are devoid of alpha-subunits, have the same number and spatial arrangement of beta-subunits as the native enzyme. All data are consistent with the hypothesis that the native enzyme consists of a central core of alpha-subunits surrounded by a capsid-like arrangement of beta-subunits. The number of beta-subunits and the shape of the protein suggest a capsid-like arrangement of beta-subunits.(ABSTRACT TRUNCATED AT 400 WORDS)     

Crystal structure of glucose dehydrogenase from Bacillus megaterium IWG3 at 1.7 A resolution

The crystal structure of glucose dehydrogenase (GlcDH) from Bacillus megaterium IWG3 has been determined to an R-factor of 17.9% at 1.7 A resolution. The enzyme consists of four identical subunits, which are similar to those of other short-chain reductases/dehydrogenases (SDRs) in their overall folding and subunit architecture, although cofactor binding sites and subunit interactions differ. Whereas a pair of basic residues is well conserved among NADP(+)-preferring SDRs, only Arg39 was found around the adenine ribose moiety of GlcDH. This suggests that one basic amino acid is enough to determine the coenzyme specificity. The four subunits are interrelated by three mutually perpendicular diad axes (P, Q, and R). While subunit interactions through the P-axis for GlcDH are not so different from those of the other SDRs, those through the Q-axis differ significantly. GlcDH was found to have weaker hydrophobic interactions in the Q-interface. Moreover, GlcDH lacks the salt bridge that stabilizes the subunit interaction in the Q-interface in the other SDRs. Hydrogen bonds between Q-axis related subunits are also less common than in the other SDRs. The GlcDH tetramer dissociates into inactive monomers at pH 9.0, which can be attributed mainly to the weakness of the Q-axis interface.     

Structure of oxalate decarboxylase from Bacillus subtilis at 1.75 A resolution

Oxalate decarboxylase is a manganese-dependent enzyme that catalyzes the conversion of oxalate to formate and carbon dioxide. We have determined the structure of oxalate decarboxylase from Bacillus subtilis at 1.75 A resolution in the presence of formate. The structure reveals a hexamer with 32-point symmetry in which each monomer belongs to the cupin family of proteins. Oxalate decarboxylase is further classified as a bicupin because it contains two cupin folds, possibly resulting from gene duplication. Each oxalate decarboxylase cupin domain contains one manganese binding site. Each of the oxalate decarboxylase domains is structurally similar to oxalate oxidase, which catalyzes the manganese-dependent oxidative decarboxylation of oxalate to carbon dioxide and hydrogen peroxide. Amino acid side chains in the two metal binding sites of oxalate decarboxylase and the metal binding site of oxalate oxidase are very similar. Four manganese binding residues (three histidines and one glutamate) are conserved as well as a number of hydrophobic residues. The most notable difference is the presence of Glu333 in the metal binding site of the second cupin domain of oxalate decarboxylase. We postulate that this domain is responsible for the decarboxylase activity and that Glu333 serves as a proton donor in the production of formate. Mutation of Glu333 to alanine reduces the catalytic activity by a factor of 25. The function of the other domain in oxalate decarboxylase is not yet known.     

Crystal structure of Bacillus subtilis signal peptide peptidase A

Signal peptide peptidase A (SppA) is a membrane-bound self-compartmentalized serine protease that functions to cleave the remnant signal peptides left behind after protein secretion and cleavage by signal peptidases. SppA is found in plants, archaea and bacteria. Here, we report the first crystal structure of a Gram-positive bacterial SppA. The 2.4-Å-resolution structure of Bacillus subtilis SppA (SppA_BS) catalytic domain reveals eight SppA_BS molecules in the asymmetric unit, forming a dome-shaped octameric complex. The octameric state of SppA_BS is supported by analytical size-exclusion chromatography and multi-angle light scattering analysis. Our sequence analysis, mutagenesis and activity assays are consistent with Ser147 serving as the nucleophile and Lys199 serving as the general base; however, they are located in different region of the protein, more than 29 Å apart. Only upon assembling the octamer do the serine and lysine come within close proximity, with neighboring protomers each providing one-half of the catalytic dyad, thus producing eight separate active sites within the complex, twice the number seen within Escherichia coli SppA (SppA_EC). The SppA_BS S1 substrate specificity pocket is deep, narrow and hydrophobic, but with a polar bottom. The S3 pocket, which is constructed from two neighboring proteins, is shallower, wider and more polar than the S1 pocket. A comparison of these pockets to those seen in SppA_EC reveals a significant difference in the size and shape of the S1 pocket, which we show is reflected in the repertoire of peptides the enzymes are capable of cleaving.     

Crystal structure of thiamin pyrophosphokinase.

Thiamin pyrophosphate (TPP) is a coenzyme derived from vitamin B1 (thiamin). TPP synthesis in eukaryotes requires thiamin pyrophosphokinase (TPK), which catalyzes the transfer of a pyrophosphate group from ATP to thiamin. TPP is essential for central metabolic processes, including the formation of acetyl CoA from glucose and the Krebs cycle. Deficiencies in human thiamin metabolism result in beriberi and Wernicke encephalopathy. The crystal structure of mouse TPK was determined by multiwavelength anomalous diffraction at 2.4 A resolution, and the structure of TPK complexed with thiamin has been refined at 1.9 A resolution. The TPK polypeptide folds as an alpha/beta-domain and a beta-sandwich domain, which share a central ten-stranded mixed beta-sheet. TPK subunits associate as a dimer, and thiamin is bound in the dimer interface. Despite lacking apparent sequence homology with other proteins, the alpha/beta-domain resembles the Rossman fold and is similar to other kinase structures, including another pyrophosphokinase and a thiamin biosynthetic enzyme. Comparison of mouse and yeast TPK structures reveals differences that could be exploited in developing species-specific inhibitors of potential use as antimicrobial agents.     

Crystal structure of the ubiquitin-like protein YukD from Bacillus subtilis

The YukD protein in Bacillus subtilis was identified in a hidden Markov model (HMM) search as being related in sequence to ubiquitin. By solving the crystal structure we show that YukD adopts a fold that is most closely related to ubiquitin, yet has the shortest C-terminal tail of all known ubiquitin-like proteins. The endogenous gene of yukD in B. subtilis was disrupted without an obvious phenotypic effect and an inducible copy encoding a C-Myc and His-tagged version of the protein was introduced at the ectopic locus amyE. Conjugation assays performed both in vitro and in vivo indicate that YukD lacks the capacity for covalent bond formation with other proteins.