High efficiency single step production of expression plasmids from cDNA clones using the Flexi Vector cloning system

The success of structural genomics and proteomics initiatives is dependent on the availability of target genes in vectors suitable for protein production. Here, we compare two high-throughput methods for producing expression vectors from plasmid-derived cDNA fragments. Expression vectors were constructed for compatibility with the Gateway recombination cloning system and the Flexi Vector restriction-based cloning system. Cloning protocols for each system were conducted in parallel for 96 different target genes from PCR through the production of sequence-verified expression clones. The short nucleotide sequences required to prepare the target open reading frames for Flexi Vector cloning allowed a single-step PCR protocol, resulting in fewer mutations relative to the Gateway protocol. Furthermore, through initial cloning of the target open reading frames directly into an expression vector, the Flexi Vector system gave time and cost savings compared to the protocol required for the Gateway system. Within the Flexi Vector system, genes were transferred between four different expression vectors. The efficiency of gene transfer between Flexi Vectors depended on including a region of sequence identity adjacent to one of the restriction sites. With the proper construction in the flanking sequence of the vector, gene transfer efficiencies of 95-98% were demonstrated.     

Simple binary vectors for DNA transfer to plant cells

Summary Cosmid binary vectors for the introduction of DNA into plant cells have been constructed. These vectors are derived from the replicon of the broad host range plasmid pRK2 and contain the T-DNA border regions between which have been placed a chimaeric gene conferring resistance to kanamycin in plant cells. Appropriate restriction endonuclease targets have also been placed between the border regions. These binary vectors, in conjunction with appropriate Agrobacterium strains, are capable of delivering DNA to plant cells in cocultivation experiments with very high efficiency. The transformation frequency is shown to be somewhat dependent on the replicon used. re]19850121 rv]19850506 ac]19850513     

pEAQ: versatile expression vectors for easy and quick transient expression of heterologous proteins in plants

Agro-infiltration of leaf tissue with binary vectors harbouring a sequence of interest is a rapid method of expressing proteins in plants. It has recently been shown that flanking the sequence to be expressed with a modified 5'-untranslated region (UTR) and the 3'-UTR from Cowpea mosaic virus (CPMV) RNA-2 (CPMV- HT ) within the binary vector pBINPLUS greatly enhances the level of expression that can be achieved [ Sainsbury, F. and Lomonossoff, G.P. (2008) Plant Physiol . 148 , 1212–1218]. To exploit this finding, a series of small binary vectors tailored for transient expression (termed the pEAQ vectors) has been created. In these, more than 7 kb of non-essential sequence was removed from the pBINPLUS backbone and T-DNA region, and unique restriction sites were introduced to allow for accommodation of multiple expression cassettes, including that for a suppressor of silencing, on the same plasmid. These vectors allow the high-level simultaneous expression of multiple polypeptides from a single plasmid within a few days. Furthermore, vectors have been developed which allow the direct cloning of genes into the binary plasmid by both restriction enzyme-based cloning and GATEWAY recombination. In both cases, N- or C-terminal histidine tags may be fused to the target sequence as required. These vectors provide an easy and quick tool for the production of milligram quantities of recombinant proteins from plants with standard plant research techniques at a bench-top scale.     

New plant promoter and enhancer testing vectors

We describe here a set of binary vectors suitable forAgrobacterium-mediated gene transfer and specially designed for studying plant promoters. These vectors are based on the use of thegus reporter gene, contain multiple unique restriction sites upstream of thegus gene, and minimal promoters for testing the effect of enhancers or activator elements. In addition, an intron-containinggus (uidA) gene was introduced into one of these vectors in order to examine reporter gene activity in tissues whereAgrobacterium contamination may be a problem or in transient expression assays.     

Phage lambda cDNA cloning vectors for subtractive hybridization, fusion-protein synthesis and Cre-loxP automatic plasmid subcloning

We describe the construction and use of two classes of cDNA cloning vectors. The first class comprises the lambda EXLX(+) and lambda EXLX(-) vectors that can be used for the expression in Escherichia coli of proteins encoded by cDNA inserts. This is achieved by the fusion of cDNA open reading frames to the T7 gene 10 promoter and protein-coding sequences. The second class, the lambda SHLX vectors, allows the generation of large amounts of single-stranded DNA or synthetic cRNA that can be used in subtractive hybridization procedures. Both classes of vectors are designed to allow directional cDNA cloning with non-enzymatic protection of internal restriction sites. In addition, they are designed to facilitate conversion from phage lambda to plasmid clones using a genetic method based on the bacteriophage P1 site-specific recombination system; we refer to this as automatic Cre-loxP plasmid subcloning. The phage lambda arms, lambda LOX, used in the construction of these vectors have unique restriction sites positioned between the two loxP sites. Insertion of a specialized plasmid between these sites will convert it into a phage lambda cDNA cloning vector with automatic plasmid subcloning capability.     

Redesign, synthesis and functional expression of the 6-deoxyerythronolide B polyketide synthase gene cluster

A generic design of Type I polyketide synthase genes has been reported in which modules, and domains within modules, are flanked by sets of unique restriction sites that are repeated in every module [1]. Using the universal design, we synthesized the six-module DEBS gene cluster optimized for codon usage in E. coli, and cloned the three open reading frames into three compatible expression vectors. With one correctable exception, the amino acid substitutions required for restriction site placements were compatible with polyketide production. When expressed in E. coli the codon-optimized synthetic gene cluster produced significantly more protein than did the wild-type sequence. Indeed, for optimal polyketide production, PKS expression had to be down-regulated by promoter attenuation to achieve balance with expression of the accessory proteins needed to support polyketide biosynthesis.     

High-throughput Binary Vectors for Plant Gene Function Analysis

A series of high-throughput binary cloning vectors were constructed to facilitate gene function analysis in higher plants. This vector series consists of plasmids designed for plant expression, promoter analysis, gene silencing, and green fluorescent protein fusions for protein localization. These vectors provide for high-throughput and efficient cloning utilizing sites for λ phage integrase/excisionase. In addition, unique restriction sites are incorporated in a multiple cloning site and enable promoter replacement. The entire vector series are available with complete sequence information and detailed annotations and are freely distributed to the scientific community for non-commercial uses.     

Non-oncogenic plant vectors for use in the agrobacterium binary system

Summary Agrobacterium strains harbouring the T-region and the virulence-region of the Ti plasmid on separate replicons still display efficient T-DNA transfer to plants. Based on this binary vector strategy we have constructed T-region derived gene vectors for the introduction of foreign DNA into plants. The vectors constructed can replicate in E. coli, thus the genetic manipulations with them can be performed with E. coli as a host. They can be transferred to Agrobacterium as a cointegrate with the wide host range plasmid R772. Their T-regions are transferred to plant cells from Agrobacterium strains conferring virulence functions.The plasmid pRAL 3940 reported here is 11.5 kb large, contains a marker to identify transformed plant cells and unique restriction sites for direct cloning of passenger DNA, flanked by the left- and right-hand border fragments of the T-region (including the 25 bp border repeats). The plasmid is free of onc-genes. Therefore, is does not confer tumorigenic traits on the transformed plant cells and mature, fertile plants can thus be regenerated from them.     

A set of modular plant transformation vectors allowing flexible insertion of up to six expression units

We have constructed a binary vector for Agrobacterium-mediated plant transformation, which has a multiple cloning site consisting of 13 hexanucleotide restriction sites, 6 octanucleotide restriction sites and 5 homing endonuclease sites. The homing endonuclease sites have the advantages to be extremely rare in natural sequences and to allow unidirectional cloning. We have also constructed a set of auxiliary vectors allowing the assembly of expression cassettes flanked by homing endonuclease sites. The expression cassettes assembled in these auxiliary vectors can be transferred into the binary vector with virtually no risk of cutting the vector within previously introduced sequences. This vector set is ideally suited for the construction of plant transformation vectors containing multiple expression cassettes and/or other elements such as matrix attachment regions. With this modular vector system, six different expression units were constructed in as many auxiliary vectors and assembled together in one plant transformation vector. The transgenic nature of Arabidopsis thaliana plants, transformed with this plant transformation vector, was assessed and the expression of each of the six genes was demonstrated.     

High-level expression vectors to synthesize unfused proteins in Escherichia coli

A new class of plasmid vectors (pANK-12, pANH-1, and pPL2) for synthesizing unfused proteins was constructed by inserting synthetic linkers at the NdeI site (CATATG) of plasmid pJL6, which contains the lambda cII gene initiator codon. These expression vectors contain the lambda pL promoter, the cII ribosome-binding site, cII start codon and unique restriction sites (KpnI, Asp718, HpaI, BamHI) downstream from the initiator ATG for expression of unfused proteins. The main advantage of these vectors is that any DNA fragment with an open reading frame that does not possess a start and/or a stop codon can be directed to overproduce protein in an unfused form.     

A versatile and efficient high-throughput cloning tool for structural biology

Methods for the cloning of large numbers of open reading frames into expression vectors are of critical importance for challenging structural biology projects. Here we describe a system termed fragment exchange (FX) cloning that facilitates the high-throughput generation of expression constructs. The method is based on a class IIS restriction enzyme and negative selection markers. FX cloning combines attractive features of established recombination- and ligation-independent cloning methods: It allows the straightforward transfer of an open reading frame into a variety of expression vectors and is highly efficient and very economic in its use. In addition, FX cloning avoids the common but undesirable feature of significantly extending target open reading frames with cloning related sequences, as it leaves a minimal seam of only a single extra amino acid to either side of the protein. The method has proven to be very robust and suitable for all common pro- and eukaryotic expression systems. It considerably speeds up the generation of expression constructs compared to traditional methods and thus facilitates a broader expression screening.     

Yeast-based recombineering of DNA fragments into plant transformation vectors by one-step transformation

T-DNA binary vectors are often used in plant transformation experiments. Because they are usually very large and have few restriction sites suitable for DNA ligation reactions, cloning DNA fragments into these vectors is difficult. We provide herein an alternative to cloning DNA fragments into very large vectors. Our yeast-based recombineering method enables DNA fragments to be cloned into certain types of T-DNA binary vectors by one-step transformation without the requirement of specific recombination sites or precisely positioned restriction ends, thus making the cloning process more flexible. Moreover, this method is inexpensive and is applicable to multifragment cloning.     

Alternative selectable markers for potato transformation using minimal T-DNA vectors

Alternative selection systems for plant transformation are especially valuable in clonal crops, such as potato (Solanum tuberosum L.), to pyramid transgenes into the same cultivar by successive transformation events. We have modified the pGPTV series of binary vectors to construct pMOA1 to pMOA5, resulting in a series of essentially identical binary vectors except for the presence of different selectable marker genes. These selectable marker genes are tightly inserted between the left and right T-DNA borders and confer resistance to kanamycin (nptII), hygromycin (hpt), methotrexate (dhfr), phosphinothricin (bar), or phleomycin (ble). The T-DNA of all the vectors is based on the minimal features necessary for plant transformation, with no extraneous DNA segments that may be unacceptable to regulatory authorities for general release of transgenic plants. A series of unique restriction sites exists between the right border and each selectable marker gene for subsequent insertion of useful genes. We have also developed improved culture procedures for potato transformation and used the pMOA1 to pMOA5 binary vectors to define stringent selection conditions for each marker gene. Combining these advances improved the frequency of recovering transformed potato plants while maintaining a low frequency of escapes. The relative efficiency of recovering transgenic potato lines with each selectable marker gene can be summarised as: kanamycin resistance>hygromycin resistance>phosphinothricin resistance>phleomycin resistance>methotrexate resistance.     

An improved vector for the expression of proteins in all three translational reading frames

We have constructed a novel vector (pN-7) that is capable of producing large amounts of recombinant proteins in E. coli and requires minimal manipulation for the construction of recombinant expression vectors. This expression vector (pN-7) contains the tightly regulated λ pL promoter, cII ribosome binding site, and initiator condon ATG. The pN-7 vector also contains cleavage sites for the restriction enzymes SmaI, EcoRV, and HpaI that provide blunt ends in all three reading frames. Thus after cleavage with the appropriate restriction enzyme, this novel vector can be directly ligated to the DNA fragment that contains the open reading frame without further manipulation.     

Vectors for expression of truncated coding sequences in Escherichia coli

We describe the construction of vectors for expressing in Escherichia coli DNA fragments obtained by progressive deletions of DNA inserts in single-stranded sequencing vectors as M13 or pTZ according to the methode of Dale et al. (Plasmid 1985, 13, 31-40). These vectors, pIMS1, pIMS5, and pIMS6, harbor all of the elements required for the regulated expression of any open reading frame flanked by EcoRI restriction sites. The encoded peptides contain only a few vector-derived amino acids. A method is described for direct selection of recombinant clones by in situ RNA hybridization. The properties of the expression vector have been analyzed with a DNA deletion series obtained from the cDNA coding for the regulatory subunit of Dictyostelium discoideum cAMP-dependent protein kinase.     

Rapid one-step recombinational cloning

As an increasing number of genes and open reading frames of unknown function are discovered, expression of the encoded proteins is critical toward establishing function. Accordingly, there is an increased need for highly efficient, high-fidelity methods for directional cloning. Among the available methods, site-specific recombination-based cloning techniques, which eliminate the use of restriction endonucleases and ligase, have been widely used for high-throughput (HTP) procedures. We have developed a recombination cloning method, which uses truncated recombination sites to clone PCR products directly into destination/expression vectors, thereby bypassing the requirement for first producing an entry clone. Cloning efficiencies in excess of 80% are obtained providing a highly efficient method for directional HTP cloning.     

Zinc finger nuclease and homing endonuclease-mediated assembly of multigene plant transformation vectors

Binary vectors are an indispensable component of modern Agrobacterium tumefaciens-mediated plant genetic transformation systems. A remarkable variety of binary plasmids have been developed to support the cloning and transfer of foreign genes into plant cells. The majority of these systems, however, are limited to the cloning and transfer of just a single gene of interest. Thus, plant biologists and biotechnologists face a major obstacle when planning the introduction of multigene traits into transgenic plants. Here, we describe the assembly of multitransgene binary vectors by using a combination of engineered zinc finger nucleases (ZFNs) and homing endonucleases. Our system is composed of a modified binary vector that has been engineered to carry an array of unique recognition sites for ZFNs and homing endonucleases and a family of modular satellite vectors. By combining the use of designed ZFNs and commercial restriction enzymes, multiple plant expression cassettes were sequentially cloned into the acceptor binary vector. Using this system, we produced binary vectors that carried up to nine genes. Arabidopsis (Arabidopsis thaliana) protoplasts and plants were transiently and stably transformed, respectively, by several multigene constructs, and the expression of the transformed genes was monitored across several generations. Because ZFNs can potentially be engineered to digest a wide variety of target sequences, our system allows overcoming the problem of the very limited number of commercial homing endonucleases. Thus, users of our system can enjoy a rich resource of plasmids that can be easily adapted to their various needs, and since our cloning system is based on ZFN and homing endonucleases, it may be possible to reconstruct other types of binary vectors and adapt our vectors for cloning on multigene vector systems in various binary plasmids.