Inhibition of heparin-induced tau filament formation by phenothiazines, polyphenols, and porphyrins

Tau protein is the major component of the intraneuronal filamentous inclusions that constitute defining neuropathological characteristics of Alzheimer's disease and other tauopathies. The discovery of tau gene mutations in familial forms of frontotemporal dementia has established that dysfunction of the tau protein is sufficient to cause neurodegeneration and dementia. Here we have tested 42 compounds belonging to nine different chemical classes for their ability to inhibit heparin-induced assembly of tau into filaments in vitro. Several phenothiazines (methylene blue, azure A, azure B, and quinacrine mustard), polyphenols (myricetin, epicatechin 5-gallate, gossypetin, and 2,3,4,2',4'-pentahydroxybenzophenone), and the porphyrin ferric dehydroporphyrin IX inhibited tau filament formation with IC(50) values in the low micromolar range as assessed by thioflavin S fluorescence, electron microscopy, and Sarkosyl insolubility. Disassembly of tau filaments was observed in the presence of the porphyrin phthalocyanine. Compounds that inhibited tau filament assembly were also found to inhibit the formation of Abeta fibrils. Biochemical analysis revealed the formation of soluble oligomeric tau in the presence of the inhibitory compounds, suggesting that this may be the mechanism by which tau filament formation is inhibited. The compounds investigated did not affect the ability of tau to interact with microtubules. Identification of small molecule inhibitors of heparin-induced assembly of tau will form a starting point for the development of mechanism-based therapies for the tauopathies.     

Oligomerization of plant FtsZ1 and FtsZ2 plastid division proteins

FtsZ was identified in bacteria as the first protein to localize mid-cell prior to division and homologs have been found in many plant species. Bacterial studies demonstrated that FtsZ forms a ring structure that is dynamically exchanged with a soluble pool of FtsZ. Our previous work established that Arabidopsis FtsZ1 and FtsZ2-1 are capable of in vitro self-assembly into two distinct filament types, termed type-I and type-II and noted the presence of filament precursor molecules which prompted this investigation. Using a combination of electron microscopy, gel chromatography and native PAGE revealed that (i) prior to FtsZ assembly initiation the pool consists solely of dimers and (ii) during assembly of the Arabidopsis FtsZ type-II filaments the most common intermediate between the dimer and filament state is a tetramer. Three-dimensional reconstructions of the observed dimer and tetramer suggest these oligomeric forms may represent consecutive steps in type-II filament assembly and a mechanism is proposed, which is expanded to include FtsZ assembly into type-I filaments. Finally, the results permit a discussion of the oligomeric nature of the soluble pool in plants.     

Calcium(II) selectively induces alpha-synuclein annular oligomers via interaction with the C-terminal domain

Alpha-synuclein filaments are the major component of intracytoplasmic inclusion bodies characteristic of Parkinson's disease and related disorders. The process of alpha-synuclein filament formation proceeds via intermediate or protofibrillar species, each of which may be cytotoxic. Because high levels of calcium(II) and other metal ions may play a role in disease pathogenesis, we investigated the influence of calcium and other metals on alpha-synuclein speciation. Here we report that calcium(II) and cobalt(II) selectively induce the rapid formation of discrete annular alpha-synuclein oligomeric species. We used atomic force microscopy to monitor the aggregation state of alpha-synuclein after 1 d at 4 degrees C in the presence of a range of metal ions compared with the filament formation pathway in the absence of metal ions. Three classes of effect were observed with different groups of metal ions: (1) Copper(II), iron(III), and nickel(II) yielded 0.8-4 nm spherical particles, similar to alpha-synuclein incubated without metal ions; (2) magnesium(II), cadmium(II), and zinc(II) gave larger, 5-8 nm spherical oligomers; and, (3) cobalt(II) and calcium(II) gave frequent annular oligomers, 70-90 nm in diameter with calcium(II) and 22-30 nm in diameter with cobalt(II). In the absence of metal ions, annular oligomers ranging 45-90 nm in diameter were observed after 10 d incubation, short branched structures appeared after a further 3 wk and extended filaments after 2-3 mo. Previous studies have shown that alpha-synuclein calcium binding is mediated by the acidic C terminus. We found that truncated alpha-synuclein (1-125), lacking the C-terminal 15 amino acids, did not form annular oligomers upon calcium addition, indicating the involvement of the calcium-binding domain.     

Metal-catalyzed oxidation of alpha-synuclein: helping to define the relationship between oligomers, protofibrils, and filaments

Oxidative stress is implicated in a number of neuro-degenerative diseases and is associated with the selective loss of dopaminergic neurons of the substantia nigra in Parkinson's disease. The role of alpha-synuclein as a potential target of intracellular oxidants has been demonstrated by the identification of posttranslational modifications of synuclein within intracellular aggregates that accumulate in Parkinson's disease brains, as well as the ability of a number of oxidative insults to induce synuclein oligomerization. The relationship between these relatively small soluble oligomers, potentially neurotoxic synuclein protofibrils, and synuclein filaments remains unclear. We have found that metal-catalyzed oxidation of alpha-synuclein inhibited formation of synuclein filaments with a concomitant accumulation of beta sheet-rich oligomers that may represent synuclein protofibrils. Similar results with a number of oxidative and enzymatic treatments suggest that the covalent association of synuclein into higher molecular mass oligomers/protofibrils represents an alternate pathway from filament formation and renders synuclein less prone to proteasomal degradation.     

A hydrophobic stretch of 12 amino acid residues in the middle of alpha-synuclein is essential for filament assembly

Neuronal and oligodendrocytic aggregates of fibrillar alpha-synuclein define several diseases of the nervous system. It is likely that these inclusions impair vital metabolic processes and compromise viability of affected cells. Here, we report that a 12-amino acid stretch ((71)VTGVTAVAQKTV(82)) in the middle of the hydrophobic domain of human alpha-synuclein is necessary and sufficient for its fibrillization based on the following observations: 1) human beta-synuclein is highly homologous to alpha-synuclein but lacks these 12 residues, and it does not assemble into filaments in vitro; 2) the rate of alpha-synuclein polymerization in vitro decreases after the introduction of a single charged amino acid within these 12 residues, and a deletion within this region abrogates assembly; 3) this stretch of 12 amino acids appears to form the core of alpha-synuclein filaments, because it is resistant to proteolytic digestion in alpha-synuclein filaments; and 4) synthetic peptides corresponding to this 12-amino acid stretch self-polymerize to form filaments, and these peptides promote fibrillization of full-length human alpha-synuclein in vitro. Thus, we have identified key sequence elements necessary for the assembly of human alpha-synuclein into filaments, and these elements may be exploited as targets for the design of drugs that inhibit alpha-synuclein fibrillization and might arrest disease progression.     

Secondary structure of alpha-synuclein oligomers: characterization by raman and atomic force microscopy

Formation of alpha-synuclein aggregates is proposed to be a crucial event in the pathogenesis of Parkinson's disease. Large soluble oligomeric species are observed as probable intermediates during fibril formation and these, or related aggregates, may constitute the toxic element that triggers neurodegeneration. Unfortunately, there is a paucity of information regarding the structure and composition of these oligomers. Here, the morphology and the conformational characteristics of the oligomers and filaments are investigated by a combined atomic force microscopy (AFM) and Raman microscopic approach on a common mica surface. AFM showed that in vitro early stage oligomers were globular with variable heights, while prolonged incubation caused the oligomers to become elongated as protofilaments. The height of the subsequently formed alpha-synuclein filaments was similar to that of the protofilaments. Analysis of the Raman amide I band profiles of the different alpha-synuclein oligomers establishes that the spheroidal oligomers contain a significant amount of alpha-helical secondary structure (47%), which decreases to about 37% in protofilaments. At the same time, when protofilaments form, beta-sheet structure increases to about 54% from the approximately 29% observed in spheroidal oligomers. Upon filament formation, the major conformation is beta-sheet (66%), confirmed by narrowing of the amide I band and the profile maximum shifting to 1667 cm(-1). The accumulation of spheroidal oligomers of increasing size but unchanged vibrational spectra during the fibrillization process suggests that a cooperative conformational change may contribute to the kinetic control of fibrillization.     

Effects of oxidative and nitrative challenges on alpha-synuclein fibrillogenesis involve distinct mechanisms of protein modifications

Filamentous inclusions of alpha-synuclein protein are hallmarks of neurodegenerative diseases collectively known as synucleinopathies. Previous studies have shown that exposure to oxidative and nitrative species stabilizes alpha-synuclein filaments in vitro, and this stabilization may be due to dityrosine cross-linking. To test this hypothesis, we mutated tyrosine residues to phenylalanine and generated recombinant wild type and mutant alpha-synuclein proteins. alpha-Synuclein proteins lacking some or all tyrosine residues form fibrils to the same extent as the wild type protein. Tyrosine residues are not required for protein cross-linking or filament stabilization resulting from transition metal-mediated oxidation, because higher Mr SDS-resistant oligomers and filaments stable to chaotropic agents are detected using all Tyr --> Phe alpha-synuclein mutants. By contrast, cross-linking resulting from exposure to nitrating agents required the presence of one or more tyrosine residues. Furthermore, tyrosine cross-linking is involved in filament stabilization, because nitrating agent-exposed assembled wild type, but not mutant alpha-synuclein lacking all tyrosine residues, was stable to chaotropic treatment. In addition, the formation of stable alpha-synuclein inclusions in intact cells after exposure to oxidizing and nitrating species requires tyrosine residues. These findings demonstrate that nitrative and/or oxidative stress results in distinct mechanisms of alpha-synuclein protein modifications that can influence the formation of stable alpha-synuclein fibrils.     

Actin-facilitated assembly of smooth muscle myosin induces formation of actomyosin fibrils

To identify regulatory mechanisms potentially involved in formation of actomyosin structures in smooth muscle cells, the influence of F-actin on smooth muscle myosin assembly was examined. In physiologically relevant buffers, AMPPNP binding to myosin caused transition to the soluble 10S myosin conformation due to trapping of nucleotide at the active sites. The resulting 10S myosin-AMPPNP complex was highly stable and thick filament assembly was suppressed. However, upon addition to F-actin, myosin readily assembled to form thick filaments. Furthermore, myosin assembly caused rearrangement of actin filament networks into actomyosin fibers composed of coaligned F-actin and myosin thick filaments. Severin-induced fragmentation of actin in actomyosin fibers resulted in immediate disassembly of myosin thick filaments, demonstrating that actin filaments were indispensable for mediating myosin assembly in the presence of AMPPNP. Actomyosin fibers also formed after addition of F-actin to nonphosphorylated 10S myosin monomers containing the products of ATP hydrolysis trapped at the active site. The resulting fibers were rapidly disassembled after addition of millimolar MgATP and consequent transition of myosin to the soluble 10S state. However, reassembly of myosin filaments in the presence of MgATP and F-actin could be induced by phosphorylation of myosin P-light chains, causing regeneration of actomyosin fiber bundles. The results indicate that actomyosin fibers can be spontaneously formed by F-actin-mediated assembly of smooth muscle myosin. Moreover, induction of actomyosin fibers by myosin light chain phosphorylation in the presence of actin filament networks provides a plausible hypothesis for contractile fiber assembly in situ.     

Organization of cytokeratin bundles by desmosomes in rat mammary cells

In a rat mammary epithelial cell line, LA-7, cytokeratin bundles recognized in immunofluorescence by a monoclonal antibody (24B42) disappear after trypsinization of cultures and are gradually reformed after replating. We have followed the time course of cytokeratin filament reappearance by growing cells in low calcium medium (0.1 mM) which prevents desmosome formation, and then shifting to high calcium (1.8 mM) to start the process. By fixing the cells at various intervals and staining them in immunofluorescence for 24B42 cytokeratin and for desmosomal proteins, we found that cell to cell contact and desmosome formation are prerequisites for keratin filament formation in these cells. EGTA treatment, by disassembling desmosomes, causes the cytokeratin filaments to disappear and the 24B42 protein to pass into a soluble form in this cell line, as ascertained by 100,000 g fractionation and immunoenzymatic assay. Cycloheximide treatment also causes cytokeratin filaments to disappear, indicating that protein synthesis is needed for normal filament maintenance. In another related cell line (106A-10a) and in HeLa cells, trypsinization and EGTA exposure do not cause a complete loss of 24B42 immunofluorescence, although distinct filaments disappear, indicating the presence in these cells of different organizing centers, besides desmosomes, for cytokeratin bundle formation. LA7 cells therefore seem to have a cytokeratin system strictly dependent on the presence of desmosomes, which act as an organizing center for filament assembly. 106A-10a cells (also rich in desmosomes) and HeLa cells (showing instead a reduced number of desmosomes) have a cytokeratin system partially or totally independent from that of desmosomes, with different organizing centers.     

Proteasomal inhibition by alpha-synuclein filaments and oligomers

A unifying feature of many neurodegenerative disorders is the accumulation of polyubiquitinated protein inclusions in dystrophic neurons, e.g. containing alpha-synuclein, which is suggestive of an insufficient proteasomal activity. We demonstrate that alpha-synuclein and 20 S proteasome components co-localize in Lewy bodies and show that subunits from 20 S proteasome particles, in contrast to subunits of the 19 S regulatory complex, bind efficiently to aggregated filamentous but not monomeric alpha-synuclein. Proteasome binding to insoluble alpha-synuclein filaments and soluble alpha-synuclein oligomers results in marked inhibition of its chymotrypsin-like hydrolytic activity through a non-competitive mechanism that is mimicked by model amyloid-Abeta peptide aggregates. Endogenous ligands of aggregated alpha-synuclein like heat shock protein 70 and glyceraldehyde-6-phosphate dehydrogenase bind filaments and inhibit their anti-proteasomal activity. The inhibitory effect of amyloid aggregates may thus be amenable to modulation by endogenous chaperones and possibly accessible for therapeutic intervention.     

RecA K72R filament formation defects reveal an oligomeric RecA species involved in filament extension

Using an ensemble approach, we demonstrate that an oligomeric RecA species is required for the extension phase of RecA filament formation. The RecA K72R mutant protein can bind but not hydrolyze ATP or dATP. When mixed with other RecA variants, RecA K72R causes a drop in the rate of ATP hydrolysis and has been used to study disassembly of hydrolysis-proficient RecA protein filaments. RecA K72R filaments do not form in the presence of ATP but do so when dATP is provided. We demonstrate that in the presence of ATP, RecA K72R is defective for extension of RecA filaments on DNA. This defect is partially rescued when the mutant protein is mixed with sufficient levels of wild type RecA protein. Functional extension complexes form most readily when wild type RecA is in excess of RecA K72R. Thus, RecA K72R inhibits hydrolysis-proficient RecA proteins by interacting with them in solution and preventing the extension phase of filament assembly.     

Characterization of early assembly intermediates of recombinant human keratins

The intermediate filaments (IFs) form major structural elements of the cytoskeleton. In vitro analyses of these fibrous proteins reveal very different assembly properties for the nuclear and cytoplasmic IF proteins. However, keratins in particular, the largest and most heterogenous group of cytoplasmic IF proteins, have been difficult to analyze due to their rapid assembly dynamics under the near-physiological conditions used for other IF proteins. We show here that keratins, like other cytoplasmic IF proteins, go through a stage of assembling into full-width soluble complexes, i.e., "unit-length filaments" (ULFs). In contrast to other IF proteins, however, longitudinal annealing of keratin ULFs into long filaments quasi-coincides with their formation. In vitro assembly of IF proteins into filaments can be initiated by an increase of the ionic strength and/or lowering of the pH of the assembly buffer. We now document that 23-mer peptides from the head domains of various IF proteins can induce filament formation even under conditions of low salt and high pH. This suggests that the "heads" are involved in the formation and longitudinal association of the ULFs. Using a Tris-buffering protocol that causes formation of soluble oligomers at pH 9, the epidermal keratins K5/14 form less regular filaments and less efficiently than the simple epithelial keratins K8/18. In sodium phosphate buffers (pH 7.5), however, K5/14 were able to form long partially unraveled filaments which compacted into extended, regular filaments upon addition of 20 mM KCl. Applying the same assembly regimen to mutant K14 R125H demonstrated that mutations causing a severe disease phenotype and morphological filament abnormalities can form long, regular filaments with surprising efficiency in vitro.     

The significance of tau and alpha-synuclein inclusions in neurodegenerative diseases

Intracellular filamentous inclusions made of either the microtubule-associated protein tau or the protein alpha-synuclein define the majority of cases of neurodegenerative disease. Mutations in the tau gene in familial forms of frontotemporal dementia and in the alpha-synuclein gene in familial cases of Parkinson's disease have provided causal links between the dysfunction of these proteins and neurodegeneration. Over the past year, several novel tau gene mutations have been identified and more has been learned about possible mechanisms by which tau gene mutations lead to frontotemporal dementia. Experimental animal models have provided a link between tau filament formation and nerve cell degeneration. Along similar lines, animal models have been produced that result in the formation of alpha-synuclein filaments and the degeneration of dopaminergic nerve cells. Building on previous work, synthetic alpha-synuclein filaments have been shown to exhibit the characteristics of amyloid.     

Plasticin, a type III neuronal intermediate filament protein, assembles as an obligate heteropolymer: implications for axonal flexibility

The assembly characteristics of the neuronal intermediate filament protein plasticin were studied in SW13 cells in the presence and absence of a cytoplasmic filament network. Full-length plasticin cannot polymerize into homopolymers in filament-less SW13c1.2Vim(-) cells but efficiently coassembles with vimentin in SW13c1.1Vim(-) cells. By cotransfecting plasticin and vimentin in SW13c1.1Vim(-) cells, we show that plasticin assembly requires vimentin in noncatalytic amounts. Differing effects on assembly were seen with point mutations of plasticin monomers that were analogous to the keratin mutations that cause epidermolysis bullosa simplex (EBS). In particular, plasticin monomers with point mutations analogous to those in EBS do not uniformly inhibit neurofilament (NF) network formation. A point mutation in the helix termination sequence resulted in complete filament aggregation when coexpressed with vimentin but showed limited coassembly with low- and medium-molecular-weight NF proteins (NF-L and NF-M, respectively). In transfected SW13c1.1Vim(+) cells, a point mutation in the first heptad of the alpha-helical coil region formed equal amounts of filaments, aggregates, and a mixture of filaments and aggregates. Furthermore, coexpression of this point mutation with NF-L and NF-M was associated with a shift toward increased numbers of aggregates. These results suggest that there are important structural differences in assembly properties between homologous fish and mammalian intermediate filament proteins. These structural differences may contribute to the distinctive growth characteristics of the teleost visual pathway.     

Assembly of amino-terminally deleted desmin in vimentin-free cells

To study the role of the amino-terminal domain of the desmin subunit in intermediate filament (IF) formation, several deletions in the sequence encoding this domain were made. The deleted hamster desmin genes were fused to the RSV promoter. Expression of such constructs in vimentin- free MCF-7 cells as well as in vimentin-containing HeLa cells, resulted in the synthesis of mutant proteins of the expected size. Single- and double-label immunofluorescence assays of transfected cells showed that in the absence of vimentin, desmin subunits missing amino acids 4-13 are still capable of filament formation, although in addition to filaments large numbers of desmin dots are present. Mutant desmin subunits missing larger portions of their amino terminus cannot form filaments on their own. It may be concluded that the amino-terminal region comprising amino acids 7-17 contains residues indispensable for desmin filament formation in vivo. Furthermore it was shown that the endogenous vimentin IF network in HeLa cells masks the effects of mutant desmin on IF assembly. Intact and mutant desmin colocalized completely with endogenous vimentin in HeLa cells. Surprisingly, in these cells endogenous keratin also seemed to colocalize with endogenous vimentin, even if the endogenous vimentin filaments were disturbed after expression of some of the mutant desmin proteins. In MCF-7 cells some overlap between endogenous keratin and intact exogenous desmin filaments was also observed, but mutant desmin proteins did not affect the keratin IF structures. In the absence of vimentin networks (MCF-7 cells), the initiation of desmin filament formation seems to start on the preexisting keratin filaments. However, in the presence of vimentin (HeLa cells) a gradual integration of desmin in the preexisting vimentin filaments apparently takes place.     

Ena/VASP proteins capture actin filament barbed ends

Ena/VASP (vasodialator-stimulated protein) proteins regulate many actin-dependent events, including formation of protrusive structures, fibroblast migration, neurite extension, cell-cell adhesion, and Listeria pathogenesis. In vitro, Ena/VASP activities on actin are complex and varied. They promote actin assembly, protect filaments from cappers, bundle filaments, and inhibit filament branching. To determine the mechanisms by which Ena/VASP proteins regulate actin dynamics at barbed ends, we monitored individual actin filaments growing in the presence of VASP and profilin using total internal reflection fluorescence microscopy. Filament growth was unchanged by VASP, but filaments grew faster in profilin-actin and VASP than with profilin-actin alone. Actin filaments were captured directly by VASP-coated surfaces via interactions with growing barbed ends. End-attached filaments transiently paused but resumed growth after becoming bound to the surface via a filament side attachment. Thus, Ena/VASP proteins promote actin assembly by interacting directly with actin filament barbed ends, recruiting profilin-actin, and blocking capping.     

Mechanical force antagonizes the inhibitory effects of RecX on RecA filament formation in Mycobacterium tuberculosis

Efficient bacterial recombinational DNA repair involves rapid cycles of RecA filament assembly and disassembly. The RecX protein plays a crucial inhibitory role in RecA filament formation and stability. As the broken ends of DNA are tethered during homologous search, RecA filaments assembled at the ends are likely subject to force. In this work, we investigated the interplay between RecX and force on RecA filament formation and stability. Using magnetic tweezers, at single molecular level, we found that Mycobacterium tuberculosis (Mt) RecX could catalyze stepwise de-polymerization of preformed MtRecA filament in the presence of ATP hydrolysis at low forces (<7 pN). However, applying larger forces antagonized the inhibitory effects of MtRecX, and a partially de-polymerized MtRecA filament could re-polymerize in the presence of MtRecX, which cannot be explained by previous models. Theoretical analysis of force-dependent conformational free energies of naked ssDNA and RecA nucleoprotein filament suggests that mechanical force stabilizes RecA filament, which provides a possible mechanism for the observation. As the antagonizing effect of force on the inhibitory function of RecX takes place in a physiological range; these findings broadly suggest a potential mechanosensitive regulation during homologous recombination.     

Direct electron microscopic visualization of barbed end capping and filament cutting by intestinal microvillar 95-kdalton protein (villin): a new actin assembly assay using the Limulus acrosomal process

We have re-examined the Ca(++)-dependent interaction of an intestinal microvillar 95- kdalton protein (MV-95K) and actin using the isolated acrosomal process bundles from limulus sperm. Making use of the processes as nuclei for assembling actin filaments, we quantitatively and qualitatively examined MV-95K’s effect on filament assembly and on F- actin, both in the presence and in the absence of Ca(++). The acrosomal processes are particularly advantageous for this approach because they nucleate large numbers of filaments, they are extremely stable, and their morphology can be used to determine the polarity of any nucleated filaments. When filament nucleation was initiated in the presence of MV-95K and the absence of Ca(++), there was biased filament assembly from the bundle ends. The calculated elongation rates from both the barbed and pointed filament ends were virtually indistinguishable from control preparations. In the presence of Ca(++), MV-95K completely inhibited filament assembly from the barbed filament end without affecting the initial rate of assembly from the pointed filament end. The inhibition of assembly results from MV-95K binding to and capping the barbed filament end, thereby preventing monomer addition. This indicates that, while MV-95K is a potent nucleator of actin assembly, it is also a potent inhibitor of actin filament elongation. To examine the effects of MV-95K on F-actin in the presence of Ca(++), we developed an assay where MV-95K is added to filaments previously assembled from acrosomal processes without causing filament breakage during mixing. These results clearly demonstrated that rapid filament shortening by MV-95K results through a mechanism of disrupting intrafilament monomer-monomer interactions. Finally, we show that tropomyosin-containing actin filaments are insensitive to cutting, but not to capping, by MV-95K in the presence of Ca(++).     

Polyphosphoinositide micelles and polyphosphoinositide-containing vesicles dissociate endogenous gelsolin-actin complexes and promote actin assembly from the fast-growing end of actin filaments blocked by gelsolin

The Ca2+-activated actin-binding protein gelsolin regulates actin filament length by severing preformed filaments and by binding actin monomers, stabilizing nuclei for their assembly into filaments. Gelsolin binds to phosphatidylinositol 4,5-bisphosphate (PIP2), with consequent inhibition of its filament severing activity and dissociation of EGTA-resistant complexes made with rabbit macrophage or human plasma gelsolin and rabbit muscle actin. This study provides evidence for an interaction of gelsolin with phosphatidylinositol monophosphate (PIP) as well as PIP2 and further describes their effects on gelsolin's function. Both phosphoinositides completely dissociate EGTA-insensitive rabbit macrophage cytoplasmic gelsolin-actin complexes and inhibit gelsolin's severing activity. The magnitude of inhibition depends strongly on the physical state of the phosphoinositides, being maximal in preparations that contain small micelles of either purified PIP or PIP2. Aggregation of PIP or PIP2 micelles by divalent cations or insufficient sonication or their incorporation into vesicles containing other phospholipids decreases but does not eliminate the inhibitory properties of the polyphosphoinositides. The presence of gelsolin partly inhibits the divalent cation-induced aggregation of PIP2 micelles. PIP2 in combination with EGTA inactivates gelsolin molecules that block the fast-growing end of actin filaments, thereby accelerating actin polymerization. Regulation of gelsolin by the intracellular messengers Ca2+ and polyphosphoinositides allows for the formation of several different gelsolin-actin intermediates with distinct functional properties that may be involved in changes in the state of cytoplasmic actin following cell stimulation.     

Ligand-dependent inhibition and reversal of tau filament formation

Alzheimer's disease is defined in part by the intraneuronal accumulation of filaments comprised of the microtubule associated protein tau. Because animal model studies suggest that a toxic gain of function accompanies tau aggregation in neurons, selective pharmacological inhibitors of the process may have utility in slowing neurodegeneration. Here, the properties of a candidate small molecule inhibitor of tau fibrillization, 3-(2-hydroxyethyl)-2-[2-[[3-(2-hydroxyethyl)-5-methoxy-2-benzothiazolylidene]methyl]-1-butenyl]-5-methoxybenzothiazolium (N744), were characterized in vitro using transmission electron microscopy. N744 inhibited arachidonic acid-induced aggregation of full-length, four-repeat tau protein at substoichiometric concentrations relative to total tau and with an IC(50) of approximately 300 nM. Inhibition was accompanied by a dose-dependent decrease in the number concentration of filaments, suggesting that N744 interfered with tau filament nucleation. Stoichiometric concentrations of N744 also promoted tau disaggregation when added to mature synthetic filaments. Disaggregation followed first-order kinetics and was accompanied by a steady decrease in filament number, suggesting that N744 promoted endwise loss of tau molecules with limited filament breakage. N744 at substoichiometric concentrations did not inhibit Abeta and alpha-synuclein aggregation, indicating it was tau selective under these conditions. Because of its activity in vitro, N744 may offer a pharmacological approach to the role of tau fibrillization in neurodegeneration.