Are the common assimilate pool and trophic relationships appropriate for dealing with the observed plasticity of grapevine development?

Background and Aims

Models based on the consideration of plant development as the result of source–sink relationships between organs suffer from an inherent lack of quantification of the effect of trophic competition on organ growth processes. The ‘common assimilate pool theory’ underlying many such models is highly debatable.

Methods

Six experiments were carried out in a greenhouse and outdoors with two grapevine cultivars and with 12 management systems, resulting in different types of plant architecture. Ten variables were used to quantify the impact of variations in assimilate supply and topological distances between sources and sinks on organogenesis, morphogenesis and biomass growth.

Key Results

A hierarchy of the responses of these processes to variations in assimilate supply was identified. Organ size seemed to be independent of assimilate supply, whereas both organogenesis and biomass growth were affected by variations in assimilate supply. Lower levels of organ biomass growth in response to the depletion of assimilate supplies seemed to be the principal mechanism underlying the plasticity of plant development in different environments. Defoliation or axis ablation resulted in changes in the relationship between growth processes and assimilate supply, highlighting the influence of non-trophic determinants. The findings cast doubt on the relevance of ‘the common assimilate pool theory’ for modelling the development of grapevine.

Conclusions

The results of this study suggest new formalisms for increasing the ability of models to take plant plasticity into account. The combination of an ecophysiological model for morphogenesis taking environmental signals into account and a biomass driven model for organogenesis and biomass allocation taking the topological distances between the sources and the sinks into account appears to be a promising approach. Moreover, in order to simulate the impact of agronomic practices, it will be necessary to take into account the non-trophic determinants of plant development such as hormonal signaletics.Key words: Biomass growth, branching system, common assimilate pool, morphogenesis, organogenesis, source–sink, grapevine, Vitis vinifera     

Assessment of uncertainty in functional-structural plant models

Background and Aims

Constructing functional–structural plant models (FSPMs) is a valuable method for examining how physiology and morphology interact in determining plant processes. However, such models always have uncertainty concerned with whether model components have been selected and represented effectively, with the number of model outputs simulated and with the quality of data used in assessment. We provide a procedure for defining uncertainty of an FSPM and how this uncertainty can be reduced.

Methods

An important characteristic of FSPMs is that typically they calculate many variables. These can be variables that the model is designed to predict and also variables that give indications of how the model functions. Together these variables are used as criteria in a method of multi-criteria assessment. Expected ranges are defined and an evolutionary computation algorithm searches for model parameters that achieve criteria within these ranges. Typically, different combinations of model parameter values provide solutions achieving different combinations of variables within their specified ranges. We show how these solutions define a Pareto Frontier that can inform about the functioning of the model.

Key Results

The method of multi-criteria assessment is applied to development of BRANCHPRO, an FSPM for foliage reiteration on old-growth branches of Pseudotsuga menziesii. A geometric model utilizing probabilities for bud growth is developed into a causal explanation for the pattern of reiteration found on these branches and how this pattern may contribute to the longevity of this species.

Conclusions

FSPMs should be assessed by their ability to simulate multiple criteria simultaneously. When different combinations of parameter values achieve different groups of assessment criteria effectively a Pareto Frontier can be calculated and used to define the sources of model uncertainty.     

Effects of positive interactions, size symmetry of competition and abiotic stress on self-thinning in simulated plant populations

Background and Aims

Competition drives self-thinning (density-dependent mortality) in crowded plant populations. Facilitative interactions have been shown to affect many processes in plant populations and communities, but their effects on self-thinning trajectories have not been investigated.

Methods

Using an individual-based ‘zone-of-influence’ model, we studied the potential effects of the size symmetry of competition, abiotic stress and facilitation on self-thinning trajectories in plant monocultures. In the model, abiotic stress reduced the growth of all individuals and facilitation ameliorated the effects of stress on interacting individuals.

Key Results

Abiotic stress made the log biomass – log density relationship during self-thinning steeper, but this effect was reduced by positive interactions among individuals. Size-asymmetric competition also influenced the self-thinning slope.

Conclusions

Although competition drives self-thinning, its course can be affected by abiotic stress, facilitation and competitive symmetry.     

Comparison of three approaches to model grapevine organogenesis in conditions of fluctuating temperature, solar radiation and soil water content

Background and Aims

There is increasing interest in the development of plant growth models representing the complex system of interactions between the different determinants of plant development. These approaches are particularly relevant for grapevine organogenesis, which is a highly plastic process dependent on temperature, solar radiation, soil water deficit and trophic competition.

Methods

The extent to which three plant growth models were able to deal with the observed plasticity of axis organogenesis was assessed. In the first model, axis organogenesis was dependent solely on temperature, through thermal time. In the second model, axis organogenesis was modelled through functional relationships linking meristem activity and trophic competition. In the last model, the rate of phytomer appearence on each axis was modelled as a function of both the trophic status of the plant and the direct effect of soil water content on potential meristem activity.

Key Results

The model including relationships between trophic competition and meristem behaviour involved a decrease in the root mean squared error (RMSE) for the simulations of organogenesis by a factor nine compared with the thermal time-based model. Compared with the model in which axis organogenesis was driven only by trophic competition, the implementation of relationships between water deficit and meristem behaviour improved organogenesis simulation results, resulting in a three times divided RMSE. The resulting model can be seen as a first attempt to build a comprehensive complete plant growth model simulating the development of the whole plant in fluctuating conditions of temperature, solar radiation and soil water content.

Conclusions

We propose a new hypothesis concerning the effects of the different determinants of axis organogenesis. The rate of phytomer appearance according to thermal time was strongly affected by the plant trophic status and soil water deficit. Futhermore, the decrease in meristem activity when soil water is depleted does not result from source/sink imbalances.     

Aluminium tolerance and high phosphorus efficiency helps Stylosanthes better adapt to low-P acid soils

Backgrond and Aims

Stylosanthes spp. (stylo) is one of the most important pasture legumes used in a wide range of agricultural systems on acid soils, where aluminium (Al) toxicity and phosphorus (P) deficiency are two major limiting factors for plant growth. However, physiological mechanisms of stylo adaptation to acid soils are not understood.

Methods

Twelve stylo genotypes were surveyed under field conditions, followed by sand and nutrient solution culture experiments to investigate possible physiological mechanisms of stylo adaptation to low-P acid soils.

Key Results

Stylo genotypes varied substantially in growth and P uptake in low P conditions in the field. Three genotypes contrasting in P efficiency were selected for experiments in nutrient solution and sand culture to examine their Al tolerance and ability to utilize different P sources, including Ca-P, K-P, Al-P, Fe-P and phytate-P. Among the three tested genotypes, the P-efficient genotype ‘TPRC2001-1’ had higher Al tolerance than the P-inefficient genotype ‘Fine-stem’ as indicated by relative tap root length and haematoxylin staining. The three genotypes differed in their ability to utilize different P sources. The P-efficient genotype, ‘TPRC2001-1’, had superior ability to utilize phytate-P.

Conclusions

The findings suggest that possible physiological mechanisms of stylo adaptation to low-P acid soils might involve superior ability of plant roots to tolerate Al toxicity and to utilize organic P and Al-P.Key words: Stylosanthes, phosphorus, P efficiency, organic P, Al toxicity, acid soil     

A canopy architectural model to study the competitive ability of chickpea with sowthistle

Background and Aims

Improving the competitive ability of crops is a sustainable method of weed management. This paper shows how a virtual plant model of competition between chickpea (Cicer arietinum) and sowthistle (Sonchus oleraceus) can be used as a framework for discovering and/or developing more competitive chickpea cultivars.

Methods

The virtual plant models were developed using the L-systems formalism, parameterized according to measurements taken on plants at intervals during their development. A quasi-Monte Carlo light-environment model was used to model the effect of chickpea canopy on the development of sowthistle. The chickpea–light environment–sowthistle model (CLES model) captured the hypothesis that the architecture of chickpea plants modifies the light environment inside the canopy and determines sowthistle growth and development pattern. The resulting CLES model was parameterized for different chickpea cultivars (viz. ‘Macarena’, ‘Bumper’, ‘Jimbour’ and ‘99071-1001’) to compare their competitive ability with sowthistle. To validate the CLES model, an experiment was conducted using the same four chickpea cultivars as different treatments with a sowthistle growing under their canopy.

Results and Conclusions

The growth of sowthistle, both in silico and in glasshouse experiments, was reduced most by ‘99071-1001’, a cultivar with a short phyllochron. The second rank of competitive ability belonged to ‘Macarena’ and ‘Bumper’, while ‘Jimbour’ was the least competitive cultivar. The architecture of virtual chickpea plants modified the light inside the canopy, which influenced the growth and development of the sowthistle plants in response to different cultivars. This is the first time that a virtual plant model of a crop–weed interaction has been developed. This virtual plant model can serve as a platform for a broad range of applications in the study of chickpea–weed interactions and their environment.Key words: Plant architecture, virtual plant modelling, L-systems formalism, crop/weed competition, integrated weed management, chickpea, Cicer arietinum, sowthistle, Sonchus oleraceus     

Modelling seagrass growth and development to evaluate transplanting strategies for restoration

Background and Aims

Seagrasses are important marine plants that are under threat globally. Restoration by transplanting vegetative fragments or seedlings into areas where seagrasses have been lost is possible, but long-term trial data are limited. The goal of this study is to use available short-term data to predict long-term outcomes of transplanting seagrass.

Methods

A functional–structural plant model of seagrass growth that integrates data collected from short-term trials and experiments is presented. The model was parameterized for the species Posidonia australis, a limited validation of the model against independent data and a sensitivity analysis were conducted and the model was used to conduct a preliminary evaluation of different transplanting strategies.

Key Results

The limited validation was successful, and reasonable long-term outcomes could be predicted, based only on short-term data.

Conclusions

This approach for modelling seagrass growth and development enables long-term predictions of the outcomes to be made from different strategies for transplanting seagrass, even when empirical long-term data are difficult or impossible to collect. More validation is required to improve confidence in the model''s predictions, and inclusion of more mechanism will extend the model''s usefulness. Marine restoration represents a novel application of functional–structural plant modelling.     

Psychological and physiological effect in humans of touching plant foliage - using the semantic differential method and cerebral activity as indicators

Background

Numerous studies have reported on the healing powers of plants and nature, but there have not been so many instances of experimental research. In particular, there are very few psychological and physiological studies using tactile stimuli. This study examines the psychological and physiological effects of touching plant foliage by using an evaluation profile of the subjects’ impressions and investigating cerebral blood flow.

Methods

The subjects were 14 young Japanese men aged from 21 to 27 years (mean ± standard deviation: 23.6 ± 2.4). With their eyes closed, the subjects touched four different tactile samples including a leaf of natural pothos (Epipremnum aureum). The physiological indices were compared before and after each stimulus. Psychological indices were obtained using a ‘semantic differential’ method.

Results

The fabric stimulus gave people ‘soft’ and ‘rough’ impressions, ‘kind’, ‘peaceful’ and ‘pleasant’ feelings psychologically, and a sense of physiological calm. On the other hand, the metal stimulus gave people ‘cold’, ‘smooth’ and ‘hard’ impressions and an image of something ‘artificial’. The metal stimulus caused a stress response in human cerebral blood flow although its evaluation in terms of ‘pleasant or unpleasant’ was neutral. There were no remarkable differences between the stimuli of natural and artificial pothos compared with other types of stimulus psychologically. However, only the natural pothos stimulus showed a sense of physiological calm in the same appearance as the fabric stimulus.

Conclusions

This study shows that people experience an unconscious calming reaction to touching a plant. It is to be concluded that plants are an indispensable element of the human environment.     

The infection processes of Sclerotinia sclerotiorum in cotyledon tissue of a resistant and a susceptible genotype of Brassica napus

Background and Aims

Sclerotinia sclerotiorum can attack >400 plant species worldwide. Very few studies have investigated host–pathogen interactions at the plant surface and cellular level in resistant genotypes of oilseed rape/canola (Brassica napus).

Methods

Infection processes of S. sclerotiorum were examined on two B. napus genotypes, one resistant cultivar ‘Charlton’ and one susceptible ‘RQ001-02M2’ by light and scanning electron microscopy from 2 h to 8 d post-inoculation (dpi).

Key Results

The resistant ‘Charlton’ impeded fungal growth at 1, 2 and 3 dpi, suppressed formation of appresoria and infection cushions, caused extrusion of protoplast from hyphal cells and produced a hypersensitive reaction. At 8 dpi, whilst in ‘Charlton’ pathogen invasion was mainly confined to the upper epidermis, in the susceptible ‘RQ001-02M2’, colonization up to the spongy mesophyll cells was evident. Calcium oxalate crystals were found in the upper epidermis and in palisade cells in susceptible ‘RQ001-02M2’ at 6 dpi, and throughout leaf tissues at 8 dpi. In resistant ‘Charlton’, crystals were not observed at 6 dpi, whereas at 8 dpi they were mainly confined to the upper epidermis. Starch deposits were also more prevalent in ‘RQ001-02M2’.

Conclusions

This study demonstrates for the first time at the cellular level that resistance to S. sclerotiorum in B. napus is a result of retardation of pathogen development, both on the plant surface and within host tissues. The resistance mechanisms identified in this study will be useful for engineering disease-resistant genotypes and for developing markers for screening for resistance against this pathogen.     

Assessing the effects of architectural variations on light partitioning within virtual wheat–pea mixtures

Background and Aims

Predicting light partitioning in crop mixtures is a critical step in improving the productivity of such complex systems, and light interception has been shown to be closely linked to plant architecture. The aim of the present work was to analyse the relationships between plant architecture and light partitioning within wheat–pea (Triticum aestivum–Pisum sativum) mixtures. An existing model for wheat was utilized and a new model for pea morphogenesis was developed. Both models were then used to assess the effects of architectural variations in light partitioning.

Methods

First, a deterministic model (L-Pea) was developed in order to obtain dynamic reconstructions of pea architecture. The L-Pea model is based on L-systems formalism and consists of modules for ‘vegetative development’ and ‘organ extension’. A tripartite simulator was then built up from pea and wheat models interfaced with a radiative transfer model. Architectural parameters from both plant models, selected on the basis of their contribution to leaf area index (LAI), height and leaf geometry, were then modified in order to generate contrasting architectures of wheat and pea.

Key results

By scaling down the analysis to the organ level, it could be shown that the number of branches/tillers and length of internodes significantly determined the partitioning of light within mixtures. Temporal relationships between light partitioning and the LAI and height of the different species showed that light capture was mainly related to the architectural traits involved in plant LAI during the early stages of development, and in plant height during the onset of interspecific competition.

Conclusions

In silico experiments enabled the study of the intrinsic effects of architectural parameters on the partitioning of light in crop mixtures of wheat and pea. The findings show that plant architecture is an important criterion for the identification/breeding of plant ideotypes, particularly with respect to light partitioning.     

Relationships between xylem vessel characteristics, calculated axial hydraulic conductance and size-controlling capacity of peach rootstocks

Background and Aims

Previous studies indicate that the size-controlling capacity of peach rootstocks is associated with reductions of scion water potential during mid-day that are caused by the reduced hydraulic conductance of the rootstock. Thus, shoot growth appears to be reduced by decreases in stem water potential. The aim of this study was to investigate the mechanism of reduced hydraulic conductance in size-controlling peach rootstocks.

Methods

Anatomical measurements (diameter and frequency) of xylem vessels were determined in shoots, trunks and roots of three contrasting peach rootstocks grown as trees, each with different size-controlling characteristics: ‘Nemaguard’ (vigorous), ‘P30-135’ (intermediate vigour) and ‘K146-43’ (substantially dwarfing). Based on anatomical measurements, the theoretical axial xylem conductance of each tissue type and rootstock genotype was calculated via the Poiseuille–Hagen law.

Key Results

Larger vessel dimensions were found in the vigorous rootstock (‘Nemaguard’) than in the most dwarfing one (‘K146-43’) whereas vessels of ‘P30-135’ had intermediate dimensions. The density of vessels per xylem area in ‘Nemaguard’ was also less than in ‘P30-135’and ‘K146-43’. These characteristics resulted in different estimated hydraulic conductance among rootstocks: ‘Nemaguard’ had higher theoretical values followed by ‘P30-135’ and ‘K146-43’.

Conclusions

These data indicate that phenotypic differences in xylem anatomical characteristics of rootstock genotypes appear to influence hydraulic conductance capacity directly, and therefore may be the main determinant of dwarfing in these peach rootstocks.Key words: Prunus, rootstock, vessel diameter, hydraulic conductance, dwarfing, xylem anatomy, Poiseuille–Hagen     

Plant growth modelling and applications: the increasing importance of plant architecture in growth models

Background

Modelling plant growth allows us to test hypotheses and carry out virtual experiments concerning plant growth processes that could otherwise take years in field conditions. The visualization of growth simulations allows us to see directly and vividly the outcome of a given model and provides us with an instructive tool useful for agronomists and foresters, as well as for teaching. Functional–structural (FS) plant growth models are nowadays particularly important for integrating biological processes with environmental conditions in 3-D virtual plants, and provide the basis for more advanced research in plant sciences.

Scope

In this viewpoint paper, we ask the following questions. Are we modelling the correct processes that drive plant growth, and is growth driven mostly by sink or source activity? In current models, is the importance of soil resources (nutrients, water, temperature and their interaction with meristematic activity) considered adequately? Do classic models account for architectural adjustment as well as integrating the fundamental principles of development? Whilst answering these questions with the available data in the literature, we put forward the opinion that plant architecture and sink activity must be pushed to the centre of plant growth models. In natural conditions, sinks will more often drive growth than source activity, because sink activity is often controlled by finite soil resources or developmental constraints.

PMA06

This viewpoint paper also serves as an introduction to this Special Issue devoted to plant growth modelling, which includes new research covering areas stretching from cell growth to biomechanics. All papers were presented at the Second International Symposium on Plant Growth Modeling, Simulation, Visualization and Applications (PMA06), held in Beijing, China, from 13–17 November, 2006. Although a large number of papers are devoted to FS models of agricultural and forest crop species, physiological and genetic processes have recently been included and point the way to a new direction in plant modelling research.Key words: Biomechanics, carbon allocation, functional–structural plant models, meristem, nitrogen, phenotypic plasticity, root architecture, simulation, sink, source, PMA06     

A functional�Cstructural modelling approach to autoregulation of nodulation

Background and Aims

Autoregulation of nodulation is a long-distance shoot–root signalling regulatory system that regulates nodule meristem proliferation in legume plants. However, due to the intricacy and subtleness of the signalling nature in plants, molecular and biochemical details underlying mechanisms of autoregulation of nodulation remain largely unknown. The purpose of this study is to use functional–structural plant modelling to investigate the complexity of this signalling system. There are two major challenges to be met: modelling the 3D architecture of legume roots with nodulation and co-ordinating signalling-developmental processes with various rates.

Methods

Soybean (Glycine max) was chosen as the target legume. Its root system was observed to capture lateral root branching and nodule distribution patterns. L-studio, a software tool supporting context-sensitive L-system modelling, was used for the construction of the architectural model and integration with the internal signalling.

Key Results

A branching pattern with regular radial angles was found between soybean lateral roots, from which a root mapping method was developed to characterize the laterals. Nodules were mapped based on ‘nodulation section’ to reveal nodule distribution. A root elongation algorithm was then developed for simulation of root development. Based on the use of standard sub-modules, a synchronization algorithm was developed to co-ordinate multi-rate signalling and developmental processes.

Conclusions

The modelling methods developed here not only allow recreation of legume root architecture with lateral branching and nodulation details, but also enable parameterization of internal signalling to produce different regulation results. This provides the basis for using virtual experiments to help in investigating the signalling mechanisms at work.     

Genotypic differences in Al resistance and the role of cell-wall pectin in Al exclusion from the root apex in Fagopyrum tataricum

Background and Aims

Aluminium (Al) toxicity is one of the factors limiting crop production on acid soils. However, genotypic differences exist among plant species or cultivars in response to Al toxicity. This study aims to investigate genotypic differences among eight cultivars of tatary buckwheat (Fagopyrum tataricum) for Al resistance and explore the possible mechanisms of Al resistance.

Methods

Al resistance was evaluated based on relative root elongation (root elongation with Al/root elongation without Al). Root apex Al content, pectin content and exudation of root organic acids were determined and compared.

Key Results

Genotypic differences among the eight cultivars were correlated with exclusion of Al from the root apex. However, there was a lack of correlation between Al exclusion and Al-induced oxalate secretion. Interestingly, cell-wall pectin content of the root apex was generally lower in Al-resistant cultivars than in Al-sensitive cultivars. Although we were unable to establish a significant correlation between Al exclusion and pectin content among the eight cultivars, a strong correlation could be established among six cultivars, in which the pectin content in the most Al-resistant cultivar ‘Chuan’ was significantly lower than that in the most Al-sensitive cultivar ‘Liuku2’. Furthermore, root apex cell-wall pectin methylesterase activity (PME) was similar in ‘Chuan’ and ‘Liuku2’ in the absence of Al, but Al treatment resulted in increased PME activity in ‘Liuku2’ compared with ‘Chuan’. Immunolocalization of pectins also showed that the two cultivars had similar amounts of either low-methyl-ester pectins or high-methyl-ester pectins in the absence of Al, but Al treatment resulted in a more significant increase of low-methyl-ester pectins and decrease of high-methyl-ester pectins in ‘Liuku2’.

Conclusions

Cell-wall pectin content may contribute, at least in part, to differential Al resistance among tatary buckwheat cultivars.     

Good clinical teachers likely to be specialist role models: results from a multicenter cross-sectional survey

Context

Medical educational reform includes enhancing role modelling of clinical teachers. This requires faculty being aware of their role model status and performance. We developed the System for Evaluation of Teaching Qualities (SETQ) to generate individualized feedback on previously defined teaching qualities and role model status for faculty in (non) academic hospitals.

Objectives

(i) To examine whether teaching qualities of faculty were associated with their being seen as a specialist role model by residents, and (ii) to investigate whether those associations differed across residency years and specialties.

Methods & Materials

Cross-sectional questionnaire survey amongst 549 Residents of 36 teaching programs in 15 hospitals in the Netherlands. The main outcome measure was faculty being seen as specialist role models by residents. Statistical analyses included (i) Pearson''s correlation coefficients and (ii) multivariable logistic generalized estimating equations to assess the (adjusted) associations between each of five teaching qualities and ‘being seen as a role model’.

Results

407 residents completed a total of 4123 evaluations of 662 faculty. All teaching qualities were positively correlated with ‘being seen as a role model’ with correlation coefficients ranging from 0.49 for ‘evaluation of residents’ to 0.64 for ‘learning climate’ (P<0.001). Faculty most likely to be seen as good role models were those rated highly on ‘feedback’ (odds ratio 2.91, 95% CI: 2.41–3.51), ‘a professional attitude towards residents’ (OR 2.70, 95% CI: 2.34–3.10) and ‘creating a positive learning climate’ (OR 2.45, 95% CI: 1.97–3.04). Results did not seem to vary much across residency years. The relative strength of associations between teaching qualities and being seen as a role model were more distinct when comparing specialties.

Conclusions

Good clinical educators are more likely to be seen as specialist role models for most residents.     

Genotypic differences in pod wall and seed growth relate to invertase activities and assimilate transport pathways in asparagus bean

Background and Aims

Coordination of sugar transport and metabolism between developing seeds and their enclosing fruit tissues is little understood. In this study the physiological mechanism is examined using two genotypes of asparagus bean (Vigna unguiculata ssp. sesquipedialis) differing in pod wall and seed growth rates. Pod growth dominates over seed growth in genotype ‘Zhijiang 121’ but not in ‘Zhijiang 282’ in which a ‘bulging pod’ phenotype is apparent from 8 d post-anthesis (dpa) onward.

Methods

Seed and pod wall growth rates and degree of pod-bulging were measured in the two genotypes together with assays of activities of sucrose-degrading enzymes and sugar content in pod wall and seed and evaluation of cellular pathways of phloem unloading in seed coat using a symplasmic fluorescent dye, 5(6)-carboxyfluorescein (CF).

Key Results

Activities of cell wall, cytoplasmic and vacuolar invertases (CWIN, CIN and VIN) were significantly smaller in pod walls of ‘282’ than in ‘121’ at 10 dpa onwards. Low INV activities were associated with weak pod wall growth of ‘282’. In seed coats, CF was confined within the vasculature in ‘282’ but moved beyond the vasculature in ‘121’, indicating apoplasmic and symplasmic phloem unloading, respectively. Higher CWIN activity in ‘282’ seed coats at 6–8 dpa correlated with high hexose concentration in embryos and enhanced early seed growth. However, CWIN activity in ‘282’ decreased significantly compared with ‘121’ from 10 dpa onwards, coinciding with earlier commencement of nuclei endoreduplication in their embryos.

Conclusions

The study shows genotypic differences between ‘bulging pod’ and ‘non-bulging’ phenotypes of asparagus bean in sucrose metabolism in relation to the pathway of phloem unloading in developing seed coats, and to pod and seed growth. Low INV activity in pod wall corresponds to its shortened and weak growth period; by contrast, the apoplasmic path in the seed coat is associated with high CWIN activity and strong early seed growth.     

Foundation characteristics of edible Musa triploids revealed from allelic distribution of SSR markers

Background and Aims

The production of triploid banana and plantain (Musa spp.) cultivars with improved characteristics (e.g. greater disease resistance or higher yield), while still preserving the main features of current popular cultivars (e.g. taste and cooking quality), remains a major challenge for Musa breeders. In this regard, breeders require a sound knowledge of the lineage of the current sterile triploid cultivars, to select diploid parents that are able to transmit desirable traits, together with a breeding strategy ensuring final triploidization and sterility. Highly polymorphic single sequence repeats (SSRs) are valuable markers for investigating phylogenetic relationships.

Methods

Here, the allelic distribution of each of 22 SSR loci across 561 Musa accessions is analysed.

Key Results and Conclusions

We determine the closest diploid progenitors of the triploid ‘Cavendish’ and ‘Gros Michel’ subgroups, valuable information for breeding programmes. Nevertheless, in establishing the likely monoclonal origin of the main edible triploid banana subgroups (i.e. ‘Cavendish’, ‘Plantain’ and ‘Mutika-Lujugira’), we postulated that the huge phenotypic diversity observed within these subgroups did not result from gamete recombination, but rather from epigenetic regulations. This emphasizes the need to investigate the regulatory mechanisms of genome expression on a unique model in the plant kingdom. We also propose experimental standards to compare additional and independent genotyping data for reference.     

Exploring the spatial distribution of light interception and photosynthesis of canopies by means of a functional-structural plant model

Background and Aims

At present most process-based models and the majority of three-dimensional models include simplifications of plant architecture that can compromise the accuracy of light interception simulations and, accordingly, canopy photosynthesis. The aim of this paper is to analyse canopy heterogeneity of an explicitly described tomato canopy in relation to temporal dynamics of horizontal and vertical light distribution and photosynthesis under direct- and diffuse-light conditions.

Methods

Detailed measurements of canopy architecture, light interception and leaf photosynthesis were carried out on a tomato crop. These data were used for the development and calibration of a functional–structural tomato model. The model consisted of an architectural static virtual plant coupled with a nested radiosity model for light calculations and a leaf photosynthesis module. Different scenarios of horizontal and vertical distribution of light interception, incident light and photosynthesis were investigated under diffuse and direct light conditions.

Key Results

Simulated light interception showed a good correspondence to the measured values. Explicitly described leaf angles resulted in higher light interception in the middle of the plant canopy compared with fixed and ellipsoidal leaf-angle distribution models, although the total light interception remained the same. The fraction of light intercepted at a north–south orientation of rows differed from east–west orientation by 10 % on winter and 23 % on summer days. The horizontal distribution of photosynthesis differed significantly between the top, middle and lower canopy layer. Taking into account the vertical variation of leaf photosynthetic parameters in the canopy, led to approx. 8 % increase on simulated canopy photosynthesis.

Conclusions

Leaf angles of heterogeneous canopies should be explicitly described as they have a big impact both on light distribution and photosynthesis. Especially, the vertical variation of photosynthesis in canopy is such that the experimental approach of photosynthesis measurements for model parameterization should be revised.     

A generalized pollination system in the tropics: bats, birds and Aphelandra acanthus

Background and Aims

A number of different types of flower-visiting animals coexist in any given habitat. What evolutionary and ecological factors influence the subset of these that a given plant relies on for its pollination? Addressing this question requires a mechanistic understanding of the importance of different potential pollinators in terms of visitation rate (pollinator ‘quantity’) and effectiveness at transferring pollen (pollinator ‘quality’) is required. While bat-pollinated plants typically are highly specialized to bats, there are some instances of bat-pollinated plants that use other pollinators as well. These generalized exceptions tend to occur in habitats where bat ‘quantity’ is poor due to low or fluctuating bat densities.

Methods

Aphelandra acanthus occurs in tropical cloud forests with relatively high densities of bat visitors, yet displays a mix of floral syndrome characteristics, suggesting adaptation to multiple types of pollinators. To understand its pollination system better, aspects of its floral phenology and the ‘quantity’ and ‘quality’ components of pollination by its floral visitors are studied here.

Key Results

Flowers were found to open and senesce throughout the day and night, although anther dehiscence was restricted to the late afternoon and night. Videotaping reveals that flowers are visited nocturnally by bats and moths, and diurnally by hummingbirds. Analysis of pollen deposition shows that bats regularly transfer large amounts of conspecific pollen, while hummingbirds occasionally transfer some pollen, and moths rarely do so.

Conclusions

Hummingbirds and bats were comparable in terms of pollination ‘quantity’, while bats were the most effective in terms of ‘quality’. Considering these components together, bats are responsible for approx. 70 % of A. acanthus pollination. However, bats also transferred remarkably large amounts of foreign pollen along with the conspecific grains (three of four grains were foreign). It is suggested that the negative effects of interspecific pollen transfer may decrease bat ‘quality’ for A. acanthus, and thus select for generalization on multiple pollinators instead of specialization on bats.Key words: Specialization, generalization, pollinator effectiveness, hummingbirds, floral syndrome, bat pollination, chiropterophily, ornithophily, cloud forest, heterospecific pollen transfer     

Characterization of a rice variety with high hydraulic conductance and identification of the chromosome region responsible using chromosome segment substitution lines

Background and Aims

The rate of photosynthesis in paddy rice often decreases at noon on sunny days because of water stress, even under submerged conditions. Maintenance of higher rates of photosynthesis during the day might improve both yield and dry matter production in paddy rice. A high-yielding indica variety, ‘Habataki’, maintains a high rate of leaf photosynthesis during the daytime because of the higher hydraulic conductance from roots to leaves than in the standard japonica variety ‘Sasanishiki’. This research was conducted to characterize the trait responsible for the higher hydraulic conductance in ‘Habataki’ and identified a chromosome region for the high hydraulic conductance.

Methods

Hydraulic conductance to passive water transport and to osmotic water transport was determined for plants under intense transpiration and for plants without transpiration, respectively. The varietal difference in hydraulic conductance was examined with respect to root surface area and hydraulic conductivity (hydraulic conductance per root surface area, L_p). To identify the chromosome region responsible for higher hydraulic conductance, chromosome segment substitution lines (CSSLs) derived from a cross between ‘Sasanishiki’ and ‘Habataki’ were used.

Key Results

The significantly higher hydraulic conductance resulted from the larger root surface area not from L_p in ‘Habataki’. A chromosome region associated with the elevated hydraulic conductance was detected between RM3916 and RM2431 on the long arm of chromosome 4. The CSSL, in which this region was substituted with the ‘Habataki’ chromosome segment in the ‘Sasanishiki’ background, had a larger root mass than ‘Sasanishiki’.

Conclusions

The trait for increasing plant hydraulic conductance and, therefore, maintaining the higher rate of leaf photosynthesis under the conditions of intense transpiration in ‘Habataki’ was identified, and it was estimated that there is at least one chromosome region for the trait located on chromosome 4.