Transposon Tn21 encodes a RecA-independent site-specific integration system

Summary The IncW plasmid R388 and the DNA region of Tn21 containing the Sm^r and the Su^r genes are capable of RecA-independent recombination. This recombination occurs at a relatively high frequency (up to 10^-4 recombinants per recipient molecule) and results in integration of the two plasmids. No detectable repeats are formed in the process. The crossover points have been confined to a 0.4-kb homologous segment in both plasmids which contains a 59-bp DNA sequence presumably involved in the acquisition of new genes by Tn21 and its relatives (Cameron et al. 1986). It is likely that the recombination occurs precisely at this point. At least one trans-acting function (an integrase) is required for the site-specific recombination. It has been localized to a 1456-bp BstEII-BamHI fragment of Tn21 and can efficiently complement the integration of plasmids containing the integration site.     

Structural and functional analysis of the origin of conjugal transfer of the broad-host-range IneW plasmid R388 and comparison with the related IncN plasmid R46

Summary We cloned and sequenced a 402 by DNA segment containing the origin of conjugal transfer (oriT) of the IncW plasmid R388. Progressive deletions from each end of the sequence were assayed for oriT activity. Stepwise reductions in mobilization frequencies, representing the loss of functional elements, correlated with deletion of structural motifs in the sequence. A sequence of 330 by of oriT was sufficient for efficient mobilization. The first 86 by of the sequence contains five tandemly repeated DNA sequences of 11 bp, followed by a 10 by perfect inverted repeat. Deletion of the first 95 by reduced the frequency of transfer by a hundred-fold. The sequence between by 183 and 218 was necessary and sufficient for low frequency mobilization and, thus, it was assumed to contain the nick site. This basis core was cloned as a 60 by segment (from by 176–236) that could be mobilized at low frequency. It includes two inverted repeats and a perfect integration host factor (IHF) consensus binding site. A third functionally important segment in oriT was located between by 260 and 330. The DNA sequence of the oriT of R388 could be aligned with that of the broad-host-range IncN plasmid R46. Moreover, the relative positions of the three inverted repeats are also conserved. Overall sequence similarity was 52%, but was significantly higher in particular regions, whch coincided with the functionally important segments mapped by deletion analysis. Conservation of these segments provided independent support for their essential role in oriT function.     

Characterization of the transposon carrying the STII gene of enterotoxigenic Escherichia coli

Summary The Escherichia coli enterotoxin STII gene is carried by Tn4521. The terminal repeats of Tn4521 are composed of IS2 sequences; however, neither repeat is a complete IS2. In order to determine how this seemingly defective transposon could transpose, mutations were generated within Tn4521 to determine the regions essential for transposition. The left terminal repeat region was found to be non-essential, but the right terminal repeat area was demonstrated to be crucial for transposition. Within the right terminal repeat area is an open reading frame (ORF), capable of encoding a 159 amino acid protein, which was shown by frameshift mutation analysis to be required for transposition. This protein may be the transposase of Tn4521. A pair of 11 bp repeat sequences flanking the ORF was also found to be important. The right 11 bp repeat is part of the left IS2 terminal sequence, and the left 11 bp repeat is located about 300 bp upstream from the right IS2 terminal sequence located within the right terminal repeat region. The results of this study suggest that Tn4521 is a functional transposon and that the sequence including this pair of 11 bp sequences plus the intervening sequence is a transposable element which may be responsible for Tn4521 transposition.     

Characterization of a chloroplast DNA sequence from Chlorella ellipsoidea that promotes autonomous replication in yeast

Summary An EcoRI 2.7 kbp fragment from Chlorella ellipsoidea chloroplast DNA (cpDNA) cloned in YIp5 was shown to promote autonomous replication in Saccharomyces cerevisiae. The fragment was localized in the small single copy region close to the inverted repeat. The ARS activity (autonomously replicating sequences in yeast) was found to be confined within a subclone of a ca. 300 bp HindIII fragment. Sequence analysis of this fragment revealed its high AT content and the presence of several direct and inverted repeats and a few elements that were related to the yeast ARS consensus sequence. Electron microscopic studies revealed that this sequence did not coincide with the primary replication origin of chloroplast DNA. The functioning of this sequence as a possible origin of plasmid replication in vivo is discussed. This is the first report on Chlorella cpDNA sequence. re]19850821 rv]19851211 ac]19851216     

The nucleotide sequence of the mercuric resistance operons of plasmid R100 and transposon Tn501: further evidence for mer genes which enhance the activity of the mercuric ion detoxification system

Summary The DNA sequences of the mercuric resistance determinants of plasmid R100 and transposon Tn501 distal to the gene (merA) coding for mercuric reductase have been determined. These 1.4 kilobase (kb) regions show 79% identity in their nucleotide sequence and in both sequences two common potential coding sequences have been identified. In R100, the end of the homologous sequence is disrupted by an 11.2 kb segment of DNA which encodes the sulfonamide and streptomycin resistance determinants of Tn21. This insert contains terminal inverted repeat sequences and is flanked by a 5 base pair (bp) direct repeat. The first of the common potential coding sequences is likely to be that of the merD gene. Induction experiments and mercury volatilization studies demonstrate an enhancing but non-essential role for these merA-distal coding sequences in mercury resistance and volatilization. The potential coding sequences have predicted codon usages similar to those found in other Tn501 and R100 mer genes.     

Occurrence of a copia-like transposable element in one of the introns of the potato starch phosphorylase gene

Summary A 37.5 kb region encompassing a set of the naphthalene degrading genes on the Pseudomonas plasmid NAH7 was found to be transposable only in the presence of the transposase encoded by the Tn1721 subgroup of the class II transposons. This newly identified mobile element, designated Tn4655, contained short (38 bp) terminal inverted repeats which shared extensive sequence homology with those of members of the Tn1721 subgroup. Tn4655 transposed by a two-step process involving formation of the cointegrate followed by its subsequent resolution. In contrast to the defect in the trans-acting factor for the first step, a functional system for the latter step was encoded within a 2.4 kb region in Tn4655. Analysis of deletion and insertion mutants demonstrated that the 2.4 kb region contained the cis-acting (res) site and the gene for a trans-acting factor (resolvase); complementation analysis indicated that Tn4655 resolvase function was not interchangeable with those of other well-studied class 11 transposons, including the Tn1721 subgroup. Tn4655 had no DNA sequences that were hybridizable with the transposase or resolvase genes of the Tn1721 subgroup.Abbreviations Ap ampicillin - Cb carbenicillin - Cm chloramphenicol - Km kanamycin - Sm streptomycin - Tc tetracycline - Tp trimethoprim     

Genetic analysis of a transposon carrying toluene degrading genes on a TOL plasmid pWWO

Summary Toluene degrading (xyl) genes on a Pseudomonas TOL plasmid pWWO are located within a 39-kb DNA portion. The 56-kb region including these xyl genes and its 17-kb derivative with a deletion of the internal 39-kb portion transposed to various sites on target replicons such as pACYC184 and R388 in escherichia coli recA strains. Thus the 56- and 17-kb regions were designated Tn4651 and Tn4652, respectively. Genetic analysis of Tn4652 demonstrated that its transposition occurs by a two-step process, namely, cointegrate formation and its subsequent resolution. The presence in cis of DNA sequences of no more than 150 bp at both ends of Tn4652 was prerequisite for cointegrate formation, and this step was mediated by a trans-acting factor, transposase, which was encoded in a 3.0-kb segment at one end of the transposon. Cointegrate resolution took place site-specifically within a 200-bp fragment, which was situated 10 kb away from the transposase gene. Based on the stability of cointegrates formed by various mini-Tn4652 derivatives, it was shown that the cointergrate resolution requires two trans-acting factors encoded within 1.0- and 1.2-kb fragments that encompass the recombination site involved in the resolution.     

A cis-acting locus for the stable propagation of yeast plasmid pSR1

Summary A DNA plasmid resembling 2 m DNA of Saccharomyces cerevisiae, pSR1, isolated from a strain of Zygosaccharomyces rouxii, has a cis-acting region, Z, for plasmid stability. The Z region was delimited to a sequence of at most 383 bp in a small unique region of the plasmid. The Z region is high in A:T pairs and contains three different pairs of short (ca. 25 bp) inverted repeats with 65% to 79% homology and three copies of direct repeats of 24 to 27 bp in length with 67% to 72% homology, but does not encode a noteworthy open reading frame. It was suggested that the Z region interacts with the S product(s) encoded by the same plasmid and with a specific host factor, but not with the other stabilization factor encoded by the P locus on the sPR1 molecule.     

The new class 11 transposon Tn163 is plasmid-borne in two unrelated Rhizobium leguminosarum biovar viciae strains

Tn163 is a transposable element identified in Rhizobium leguminosarum bv. viciae by its high insertion rate into positive selection vectors. The 4.6 kb element was found in only one further R. leguminosarum bv. viciae strain out of 70 strains investigated. Both unrelated R. leguminosarum bv. viciae strains contained one copy of the transposable element, which was localized in plasmids native to these strains. DNA sequence analysis revealed three large open reading frames (ORFs) and 38 bp terminal inverted repeats. ORF1 encodes a putative protein of 990 amino acids displaying strong homologies to transposases of class 11 transposons. ORF2, transcribed in the opposite direction, codes for a protein of 213 amino acids which is highly homologous to DNA invertases and resolvases of class II transposons. Homology of ORF1 and ORF2 and the genetic structure of the element indicate that Tn163 can be classified as a class II transposon. It is the first example of a native transposon in the genus Rhizobium. ORF3, which was found not to be involved in the transposition process, encodes a putative protein (256 amino acids) of unknown function. During transposition Tn163 produced direct repeats of 5 bp, which is typical for transposons of the Tn3 family. However, one out of the ten insertion sites sequenced showed a 6 by duplication of the target DNA; all duplicated sequences were A/T rich. Insertion of Tn163 into the sacB gene revealed two hot spots. Chromosomes of different R. leguminosarum bv. viciae strains were found to be highly refractory to the insertion of Tn163.     

The 20 bp, directly repeated DNA sequence of broad host range plasmid R1162 exerts incompatibility in vivo and inhibits R1162 DNA replication in vitro

Summary The broad host range plasmid R1162 contains a directly repeated, 20 bp DNA sequence in the region of the plasmid required in cis for replication and maintenance. This sequence has been chemically synthesized and cloned, and shown to be sufficient for expression of plasmid incompatibility. The sequence also inhibits replication of R1162 DNA in a cell-free system. The strengths of both these effects are determined by the number of direct repeats (DRs) present, and are also affected to similar degrees by different mutations within the repeated sequence. Several of the mutations were tested for their effect in cis on plasmid maintenance in the cell, and one was found to cause an increase in plasmid copy number. The results suggest that the direct repeats exert incompatibility by inhibiting DNA replication, presumably because they are the binding sites for a limiting essential protein.Abbreviations bp base pairs - Cb^r, Km^r, Sm^r resistance to carbenicillin, kanamycin, streptomycin, respectively - DR direct repeat     

Nucleotide sequence and functional properties of DNA encoding incompatibility in the broad host-range plasmid R1162

Summary A 370 base pair (bp) fragment of R1162 DNA encoding the incompatibility determinant has been cloned and sequenced. The DNA is located between 6.1 and 6.5 on the R1162 map, near the origin of replication. The sequence contains three perfectly conserved 20 bp direct repeats, with 11 bp of this sequence repeated a fourth time. The direct repeat unit shows some homology with that of another, unrelated broad host-range plasmid, RK2. The cloned DNA has two other properties: it lowers the copy number of R1162 when cloned into this plasmid, and it is required in cis for replication of R1162 satellite plasmids.     

A plasmid sequence from Rhizobium leguminosarum 300 contains homology to sequences near the octopine TL-DNA right border

Summary The DNA sequence from a Rhizobium leguminosarum 300 (RL300) plasmid that contains homology to the T_c-DNA of Agrobacterium tumefaciens is described. The RL300 sequence has 78% homology to a 359 bp sequence in the T_c-DNA of pTi15955. The RL300 homology starts approximately 100 bp from the 24 bp border sequence of the T_L-DNA and ends approximately 3 bp from an IS66 homolog in the T_c-DNA. An unusual feature of the RL300 homology is the presence of 81 bp direct repeats with T_c-DNA homology, separated by 201 bp. One end of each direct repeat has a 12 bp palindrome. Four cloned sequences of RL300 with homology to the T DNA region were hybridized to plasmid lysates of RL300 derivatives to determine the source of each plasmid. The sequenced homolog, originally on pRH228, was isolated from pRL7JI; the other 3 homologs were isolated from the transmissable plasmids pRL7JI (pRH235) and pRL8JI (pRH235 and pRH236).     

The terminal inverted repeats of the linear plasmid SCP1 of Streptomyces coelicolor A3(2) possess a truncated copy of the transposon Tn 4811 of Streptomyces lividans 66

Streptomyces coelicolor A3(2), the best genetically studied streptomycete and Streptomyces lividans 66 are very closely related strains. This is further emphasized by our finding that a truncated copy of Tn4811 of S. lividans is present in the terminal inverted repeats of the S. coelicolor giant linear plasmid SCP1. The copy of Tn4811 in SCP1 lacks the first 1276 bp and shows only minor changes in the nucleotide sequence of the remaining 4.12 kb. Tn4811 exists in both ends of SCP1.     

Nucleotide sequence of the region of the origin of replication of the broad host range plasmid RK2

Summary A DNA sequence cosisting of 617 base pairs (bp) from the region of the origin of replication of the broad-host range plasmid RK2 has been determined. Included within this sequence is a 393 bp HpaII restriction fragment that provides a functional origin or replication when other essential RK2 specified functions are provided in trans. Also contained in this sequence is a region, distinguished functionally from the replication origin, which is involved in the expression of inc ₂ incompatibility, i.e., the ability of derivatives of RK2 to eliminate a resident RK2 plasmid. The 617 bp sequence includes eight 17 base pair direct repeats with 5 located within the region required for a functional replication origin and 3 within the region involved in inc ₂ incompatibility. In addition, a 40 bp region rich in A-T followed by a 60 bp stretch having a high G+C content is present. Deletion evidence indicates that the A-T rich and possibly the G+C regions are required for a functional replication origin. Based on the evidence contained in this and the preceding paper (Thomas et al. 1980 b) a model will be presented for the involvement of these specific sequences in the initiation of RK2 DNA replication, plasmid maintenance and plasmid incompatibility.     

The region essential for efficient autonomous replication of pSa in Escherichia coli

Summary Comparative analyses were made between plasmid pSa17, a deletion derivative of pSa that is capable of replicating efficiently in Escherichia coli and plasmid pSa3, a derivative that is defective for replication. By comparing the restriction maps of these two derivatives, the regions essential for replication and for stable maintenance of the plasmid were determined. A 2.5 kb DNA segment bearing the origin of DNA replication of pSa17 was sequenced. A 36 kDa RepA protein was encoded in the region essential for replication. Downstream of the RepA coding region was a characteristic sequence including six 17 bp direct repeats, the possible binding sites of RepA protein, followed by AT-rich and GC-rich sequences. Furthermore, an 8 bp incomplete copy of the 17 bp repeat was found in the promoter region of the repA gene. Based on the hypothesis that RepA protein binds to this partial sequence as well as to intact 17 bp sequences, an autoregulatory system for the synthesis of RepA protein may be operative. Another open reading frame (ORF) was found in the region required for the stability of the plasmid. The putative protein encoded in this ORF showed significant homology to several site-specific recombination proteins. A possible role of this putative protein in stable maintenance of the plasmid is discussed.     

Complete Sequence of Plasmid pMP1 from the Marine Environmental Vibrio vulnificus and Location of Its Replication Origin

A novel cryptic plasmid, pMP1, from an environmental Vibrio vulnificus MP-4 isolated from Mai Po Nature Reserve in Hong Kong, has been characterized. The 7.6-kb plasmid had guanine–cytosine content of 40.03% and encoded four open reading frames (ORFs) with >100 amino acids. The predicted protein of ORF1 contained 478 amino acids showing 29% identity and 50% similarity over 309 amino acids to the integrase of Vibrio cholerae phage VP2. ORF2 encoded a putative protein of 596 amino acids, which were 23% identity and 42% similarity over 455 amino acids to the tail tape measure protein TP901 of Chromohalobacter salexigens phage. ORF3 and ORF4 encoded putative proteins of 103 and 287 amino acids, respectively, but showed no homologies to any known proteins. Further experiments indicated that a 3.2-kb fragment from EcoRI digestion could self-replicate. Analysis indicated that a sequence upstream of ORF4 had the features characteristic of theta-type replicons: AT-rich region, six potential direct repeats (iterons) spaced approximately two DNA helical turn apart (about 23 bp), two copies of 9 bp dnaA boxes, three Dam methylation sites, and five inverted repeats. Complementation experiments confirmed that the protein encoded by ORF4 was required for plasmid replication. We propose that ORF4 encode a new type of Rep protein and pMP1 is a new type of theta plasmid.     

Identification of Tn4430, a transposon of Bacillus thuringiensis functional in Escherichia coli

Summary The mobile genetic element Tn4430, originating from the gram-positive bacterium, Bacillus thuringiensis, and previously described as the Th-sequence, is the first transposon isolated from the genus Bacillus. In the present work a gene (APH-III) conferring resistance to kanamycin was inserted into this 4.2 kb transposon. Transposition experiments showed that Tn4430APH-III could transpose in the gram-negative host Escherichia coli when its insertion functions were supplied by an intact copy of Tn4430. By transposing Tn4430APH-III directly onto pBR322, it was possible to determine the nucleotide sequence of the terminal inverted repeats of Tn4430 and of the target DNA site. Identical 38 bp in inverted orientation are situated at each end of the transposon and there is a direct duplication of 5 bp at the insertion site. Thus, it is clear that Tn4430 is closely related to the transposons belonging to the Tn3 family (class II elements).     

Mobilization functions of the bacteriocinogenic plasmid pRJ6 of <Emphasis Type="Italic">Staphylococcus aureus</Emphasis>

Plasmid pRJ6 is the first known bacteriocinogenic mobilizable (Mob) plasmid of Staphylococcus aureus. Its Mob region is composed of four mob genes (mobCDAB) arranged as an operon, a genetic organization uncommon among S. aureus Mob plasmids. oriT _pRJ6 was detected in a region of 431 bp, positioned immediately upstream of mobC. This region, when cloned into pCN37, was able to confer mobilization to the re-combinant plasmid only in the presence of pRJ6. The entire Mob region, including oriT _pRJ6, is much more similar to Mob regions from several coagulase-negative staphylococci plasmids, although some remarkable similarities with S. aureus Mob plasmids can also be noted. These similarities include the presence within oriT _pRJ6 of the three mcb (MobC binding sites), firstly described in pC221 and pC223, an identical nick site also found in these same plasmids, and a nearly identical sra _pC223 site (sequence recognized by MobA). pRJ6 was successfully transferred to S. epidermidis by conjugation in the presence of the conjugative plasmid pGOl. Altogether these findings suggest that pRJ6 might have been originally a coagulase-negative staphylococci plasmid that had been transferred successfully to S. aureus.     

The Bacteroides fragilis BtgA Mobilization Protein Binds to the oriT Region of pBFTM10

The Bacteroides fragilis conjugal plasmid pBFTM10 contains two genes, btgA and btgB, and a putative oriT region necessary for transfer in Bacteroides fragilis and Escherichia coli. The BtgA protein was predicted to contain a helix-turn-helix motif, indicating possible DNA binding activity. DNA sequence analysis of the region immediately upstream of btgA revealed three sets of inverted repeats, potentially locating the oriT region. A 304-bp DNA fragment comprising this putative oriT region was cloned and confirmed to be the functional pBFTM10 oriT by bacterial conjugation experiments using E. coli and B. fragilis. btgA was cloned and overexpressed in E. coli, and the purified protein was used in electrophoretic mobility shift assays, demonstrating specific binding of BtgA protein to its cognate oriT. DNase I footprint analysis demonstrated that BtgA binds apparently in a single-stranded fashion to the oriT-containing fragment, overlapping inverted repeats I, II, and III and the putative nick site.