Fusarium solani pisi cutinase

Cutinase from Fusarium solani pisi has been studied extensively with respect to its structural and functional properties. The crystal structure of the enzyme was solved to high atomic resolution (1 angstrom), while data on structural dynamics have been obtained from detailed NMR studies. Functional data were mainly derived from kinetic studies using substrate analogues that simplify the kinetic behaviour. The properties of wild-type cutinase are reviewed and discussed in relation with the effects brought about by site-directed variants of the enzyme.     

Stability of a Fusarium solani pisi recombinant cutinase in phosphatidylcholine reversed micelles

Summary A Fusarium solani pisi recombinant cutinase solubilized in phosphatidylcholine/isooctane reversed micelles was used to catalyse the esterification reaction of butyric acid with 2-butanol at pH 10.7. The influence of temperature, Wo and substrates on lipase stability was evaluated. The enzyme displays a better stability, with a half-life over 125 days, at a temperature of 22°C and for a low water content (W_O= 6.5). Butyric acid increased the cutinase deactivation (t_1/2=0.56h), while 2-butanol led to a similar half-life (t_1/2=14h) as without substrate.     

Isolation and characterization of a cutinase from Fusarium roseum culmorum and its immunological comparison with cutinases from F. solani pisi.

Fusarium roseum culmorum, grown on apple cutin as the sole source of carbon, was shown to produce a cutin depolymerizing enzyme. From the extracellular fluid of these F. roseum cultures, a cutinase and a nonspecific esterase were isolated utilizing Sephadex G-100, QAE-Sephadex, and SP-Sephadex chromatography. The homogeneity of the cutinase was verified by polyacrylamide disc gel electrophoresis. The molecular weight of the cutinase was estimated to be 24,300 by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. Electrophoretic mobility of this enzyme was between that of Cutinases I and II from Fusarium solani pisi. The F. roseum cutinase hydrolyzed p-nitrophenyl butyrate and cutin, but not p-nitrophenyl palmitate, while the nonspecific esterase hydrolyzed the long-chain esters. Amino acid composition of F. roseum cutinase was found to be similar to that of F. solani pisi Cutinase I except for differences in the number of serine, valine, and cysteine residues. The time-course, protein concentration dependence, substrate concentration dependence, and pH optimum (10.0 for cutin hydrolysis) of the F. roseum cutinase was similar to the cutinases from F. solani pisi. The F. roseum cutinase was inhibited by diisopropylfluorophosphate and paraoxon, and the [³H]diisopropylphosphate group was covalently attached to the enzyme upon treatment with tritiated diisopropylfluorophosphate. Therefore, it is concluded that catalysis by cutinase involves an “active serine.” Immunochemical studies with a rabbit antibody prepared against F. solani pisi Cutinase I demonstrated that Cutinase II from this organism was immunologically very similar to, but not identical to, Cutinase I. On the other hand, the cutinase from F. roseum was immunologically quite different from the cutinases isolated from F. solani pisi in that it did not cross-react with anticutinase I. However, all three cutinases were virtually identical in their sensitivity to inhibition by anticutinase I, and all three enzymes were virtually completely inhibited by the anticutinase I.     

Production of Fusarium solani f. sp. pisi cutinase in Fusarium venenatum A3/5

Fusarium venenatum A3/5 was transformed using the Aspergillus niger expression plasmid, pIGF, in which the coding sequence for the F. solani f. sp. pisi cutinase gene had been inserted in frame, with a KEX2 cleavage site, with the truncated A. niger glucoamylase gene under control of the A. niger glucoamylase promoter. The transformant produced up to 21 U cutinase l⁻¹ in minimal medium containing glucose or starch as the primary carbon source. Glucoamylase (165 U l⁻¹ or 8 mg l⁻¹) was also produced. Both the transformant and the parent strain produced cutinase in medium containing cutin.     

NMR studies of Fusarium solani pisi cutinase in complex with phosphonate inhibitors.

The backbone dynamics of Fusarium solani pisi cutinase in complex with a phosphonate inhibitor has been studied by a variety of nuclear magnetic resonance experiments to probe internal motions on different time scales. The results have been compared with dynamical studies performed on free cutinase. In solution, the enzyme adopts its active conformation only upon binding the inhibitor. While the active site Ser120 is rigidly attached to the stable alpha/beta core of the protein, the remainder of the binding site is very flexible in the free enzyme. The other two active site residues Asp175 and His188 as well as the oxyanion hole residues Ser42 and Gln121 are only restrained into their proper positions upon binding of the substrate-like inhibitor. The flap helix, which opens and closes the binding site in the free molecule, is also fixed in the cutinase-inhibitor complex. Our results are in contrast with the X-ray analysis results, namely that in the protein crystal, free cutinase has a well-defined active site and a preformed oxyanion hole and that it does not need any rearrangements to bind its substrate. Our solution studies show that cutinase does need conformational rearrangements to bind its substrate, which may form the rate-limiting step in catalysis.     

Crystallization and preliminary X-ray study of a recombinant cutinase from Fusarium solani pisi

Recombinant cutinase from Fusarium solani pisi is expressed and excreted with very high yields in Escherichia coli cultures. Cutinase was crystallized at 20 degrees C using the vapour diffusion technique, with polyethylene glycol 6000 as precipitant. Best crystals were obtained at pH 7.0 with polyethylene glycol 6000 as precipitant. Best crystals were obtained at pH 7.0 with polyethylene glycol at 15 to 20%. They are monoclinic, with space group P2(1) and cell dimensions a = 35.1 A, b = 67.4 A, c = 37.05 A and beta = 94.0 degrees; they diffract beyond 1.5 A resolution. The asymmetric unit contains one molecule of 22,000 Da (Vm = 1.98 A3/Da; 38% water).     

Improved stability and reactivity of Fusarium solani cutinase in supercritical CO2

Cutinase from Fusarium solani pisi was immobilized on Accurel EP100 and catalyzed the esterification of hexanoic acid with hexanol in supercritical CO. The enzyme lost only 10% of its activity over six days. Esterification was maximal with a water activity of a = 0.76.     

Screening of stable cutinase from Fusarium solani pisi using plasmid display system

Although enzymes are potential candidates for industrial catalysts, their industrial applications have been limited because they are easily deactivated under harsh operational conditions. In this study, a plasmid display system was used for the screening of stable cutinase in organic solvent (20% acetonitrile) and at high temperature. The fusion proteins were expressed and bound to specific DNA sequences on the encoding plasmids. Proteolysis resistance was used as a selection tool, where well-folded proteins are more resistant to the protease digestion than poorly-folded proteins. Stable mutants, identified to be I183T, I183F, and A56V, were screened in the organic solvent and at high temperature. The I183T and I183F mutants were more stable than the A56V mutant in 20% acetonitrile, while the A56V mutant was superior to the I183T and I183F mutants at high temperature. Molecular modeling was performed in order to investigate the residual characteristics of the stable mutants; secondary structure, residual solvation energy, residual ??-carbon flexibility, number of hydrogen bonds, number of neighboring amino acids, ratio of exposed/buried residue, and surface area. This analysis provided some guidelines for increased stability.     

Hydrolysis of plant cuticle by plant pathogens. Properties of cutinase I, cutinase II, and a nonspecific esterase isolated from Fusarium solani pisi.

The properties of the homogeneous cutinase I, cutinase II, and the nonspecific esterase isolated from the extracellular fluid of cutin-grown Fusarium solani F. pisi (R.E. Purdy and P.E. Kolattukudy (1975), Biochemistry, preceding paper in this issue) were investigated. Using tritiated apple cutin as substrate, the two cutinases showed similar substrate concentration dependence, protein concentration dependence, time course profiles, and pH dependence profiles with optimum near 10.0. Using unlabeled cutin, the rate of dihydroxyhexadecanoic acid release from apple fruit cutin by cutinase I was determined to be 4.4 mumol per min per mg. The cutinases hydrolyzed methyl hexadecanoate, cyclohexyl hexadecanoate, and to a much lesser extent hexadecyl hexadecanoate but not 9-hexadecanoyloxyheptadecane, cholesteryl hexadecanoate, or hexadecyl cinnamate. The extent of hydrolysis of these model substrates by cutinase I was at least three times that by cutinase II. The nonspecific esterase hydrolyzed all of the above esters except hexadecyl cinnamate, and did so to a much greater extent than did the cutinases. None of the enzymes hydrolyzed alpha- or beta-glucosides of p-nitrophenol. p-Nitrophenyl esters of fatty acids from C2 through C18 were used as substrates and V's and Kms were determined...     

The interaction of Fusarium solani pisi cutinase with long chain spin label esters

We here present a study of the interaction between the Fusarium solani pisi cutinase mutant S120A and spin-labeled 4,4-dimethyloxazoline-N-oxyl-(DOXYL)-stearoyl-glycerol substrates in a micellar system. The interaction is detected by NMR measuring changes in chemical shift for 1H and 15N as well as relaxation parameters for backbone 1H (T1) and 15N (T1, T2) atoms as well as for side chain methyl groups 1H (T1). The detected interaction shows a weak binding of cutinase to the lipid micelles. Structural and mobility changes are located inside and around the active site, its flanking loops, and the oxyanion hole, respectively. Relaxation changes in the amino acid pairs Ser 92, Ala 93 and Thr 173, Gly 174 positioned at the edge of each of the active site flanking loops make these residues prime candidates for hinges, allowing for structural rearrangement during substrate binding. The cutinase mutant S120A used carries a 15 amino acid pro-peptide; the significance of this pro-peptide was so far undetermined. We show here that the pro-peptide is affected by the presence of the micellar substrate. Relaxation enhancements indicative of spatial proximity between the DOXYL group in the lipid chain and some hydrophobic residues surrounding the active site could be found.     

Direct evidence for the presence of beta-hydroxyphenylalanine and beta-hydroxytyrosine in cutinase from Fusarium solani pisi

Extracellular cutinase induced by cutin hydrolysate in glucose-grown Fusarium solani f. pisi was isolated in electrophoretically homogeneous form. This enzyme was similar to cutinase I generated by cutin-grown cells in its catalytic properties such as pH optimum, substrate specificity, and inactivation by “active serine”-directed reagents. Its molecular weight was 26,300 and this enzyme had a much larger content of serine and threonine residues than that found in cutinase from the cutin-grown cells. The hydrolysate-induced enzyme was a glycoprotein containing 6% carbohydrates. Alkaline NaB³H₄ treatment of the protein generated labeled protein and labeled carbohydrates. Analyses of the hydrolysates of these labeled products showed that alanine, α-aminobutyrate, phenylalanine, and tyrosine in the protein were labeled strongly suggesting that serine, threonine, β-hydroxyphenylalanine, and β-hydroxytyrosine were involved in O-glycosidic linkages in this protein. The protein hydrolysate also contained labeled gulonic acid, suggesting that d-glucuronic acid was attached to the protein via a base stable linkage, presumably an amide linkage at the N-terminus. The labeled reduced carbohydrates were identified by ion-exchange, thin-layer, gas-liquid, and high-performance liquid chromatographic techniques as mannitol, arabitol, gulonic acid, and 2-aminosorbitol. Thus mannose, arabinose, glucuronic acid, and glucosamine (possibly N-acetylated) were attached O-glycosidically to the hydroxyamino acids. Induction of cutinase by cutin hydrolysate in the presence of tritiated phenylalanine gave labeled cutinase. Cleavage of the O-glycosidically attached carbohydrates by anhydrous HF, followed by enzymatic hydrolysis of the labeled protein, gave rise to labeled amino acids, which upon analysis with an amino acid analyzer revealed four radioactive components. Two of them were identified as phenylalanine and tyrosine, while the other two cochromatographed with authentic β-hydroxyphenylalanine and β-hydroxytyrosine not only by the amino acid analyzer but also upon thin-layer chromatography. These results constitute the first direct evidence for the presence of the novel β-hydroxyaromatic amino acids in a protein.     

Tryptophan mediated photoreduction of disulfide bond causes unusual fluorescence behaviour of Fusarium solani pisi cutinase.

The fluorescence signal of the single tryptophan residue (Trp69) of Fusarium solani pisi cutinase is highly quenched. However, prolonged irradiation of the enzyme in the tryptophan absorption band causes an increase of the tryptophan fluorescence quantum yield by an order of magnitude. By using a combination of NMR spectroscopy and chemical detection of free thiol groups with a sulfhydryl reagent we could unambiguously show that the unusual fluorescence behaviour of Trp69 in cutinase is caused by the breaking of the disulfide bond between Cys31 and Cys109 upon irradiation, while the amide-aromatic hydrogen bond between Ala32 and Trp69 remains intact. This is the first example of tryptophan mediated photoreduction of a disulfide bond in proteins.     

Fusarium solani pisi recombinant cutinase partitioning in peg/potassium phosphate aqueous two-phase systems

Summary An aqueous two-phase system of polyethylene glycol (PEG) and potassium phosphate was developed for extraction of a cutinase from cell debris of a recombinant Escherichia coli strain. Basic studies to identify the primary factors which affect cutinase partition, namely the influence of polymer molecular weight, polymer concentration and pH were carried out using a purified preparation of the cutinase. The enzyme partition coefficient was enhanced with decreasing PEG molecular weight, increasing tie-line length and pH.     

Fusarium polycaprolactone depolymerase is cutinase.

Polycaprolactone (PCL), a synthetic polyester, is degraded by a variety of microorganisms, including some phytopathogens. Many phytopathogens secrete cutinase, a serine hydrolase that degrades cutin, the structural polymer of the plant cuticle. We compared wild-type strains and a cutinase-negative gene replacement mutant strain of Fusarium solani f. sp. pisi (D. J. Stahl and W. Schäfer, Plant Cell 4:621-629, 1992) and a wild-type strain of Fusarium moniliforme to show that Fusarium cutinase is a PCL depolymerase. The wild-type strains, but not the mutant strain, (i) degraded PCL and used it as a source of carbon and energy, (ii) showed induction of secreted PCL depolymerase and an esterase activity of cutinase when grown in the presence of cutin, and (iii) showed induction of PCL depolymerase and an esterase activity of cutinase when grown in the presence of a hydrolysate of PCL, which contains PCL oligomers that are structurally similar to the natural inducers of cutinase. These results together with other details of regulation and conditions for optimal enzyme activity indicate that the Fusarium PCL depolymerase, required for degradation and utilization of PCL, is cutinase.     

DSC studies of Fusarium solani pisi cutinase: consequences for stability in the presence of surfactants

The application of cutinase from Fusarium solani pisi as a fat-stain removing ingredient in laundry washing is hampered by its lack of stability in the presence of anionic surfactants. We postulate that the stability of cutinase towards anionics can be improved by mutations increasing its temperature stability. Thermal unfolding as measured with DSC, appears to be irreversible, though the thermograms are more symmetric than predicted by a simple irreversible model. In the presence of taurodeoxycholate (TDOC), the unfolding temperature is lower and the unfolding is reversible. We conclude that an early reversible unfolding intermediate exists in which a number of additional hydrophobic patches are exposed to the solvent, or preferentially are covered with TDOC. Improvement of the stability of cutinase with respect to both surfactants and thermal denaturation, should thus be directed toward the prevention of exposure of hydrophobic patches in the early intermediate.     

Integration of production and aqueous two-phase systems extraction of extracellular Fusarium solani pisi cutinase fusion proteins

Genetic engineering was integrated with the production and purification of Fusarium solani pisi cutinases, in order to obtain the highest amount of enzyme activity units, after purification. An aqueous two-phase system (ATPS) of polyethylene glycol 3350, dipotassium phosphate and whole broth was used for the extraction of three extracellular cutinases expressed in Saccharomyces cerevisiae. The production/extraction process was evaluated regarding cutinases secretion in the medium, partition behaviour and extraction yields in the ATPS. The proteins studied were cutinase wild type and two fusion proteins of cutinase with the tryptophane-proline (WP) fusion tags, namely (WP)(2) and (WP)(4). The (WP)(4) fusion protein enabled a 300-fold increase of the cutinase partition coefficient when comparing to the wild type. However, the secretion of the fusion proteins was lower than of the wild type cutinase secretion. A batch extraction strategy was compared with a continuous extraction in a perforated rotating disc contactor (PRDC). The batch and continuous systems were loaded with as much as 60% (w/w) whole cultivation broth. The continuous extraction strategy provided a 2.5 higher separation capacity than the batch extraction strategy. Considering the integrated process, the cutinase-(WP)(2) proved to lead to the highest product activity, enabling five and six times more product activity than the wild type and the (WP)(4) fusion proteins, respectively.     

Cutinase gene disruption in Fusarium solani f sp pisi decreases its virulence on pea.

Fusarium solani f sp pisi (Nectria haematococca) isolate 77-2-3 with one cutinase gene produced 10 to 20% of the cutinase produced by isolate T-8 that has multiple cutinase genes, whereas cutinase gene-disrupted mutant 77-102 of isolate 77-2-3 did not produce cutinase. On the surface of pea stem segments, lesion formation was most frequent and most severe with T-8, less frequent and less severe with 77-2-3, and much less frequent and much milder with the gene-disrupted mutant. Microscopic examination of the lesions caused by the mutant strongly suggest that it penetrated the host mostly via the stomata. In seedling assays, 77-2-3 caused severe lesions on every seedling and stunted growth, whereas the mutant showed very mild lesions on one-third of the seedlings with no stunting. Thus, cutinase gene disruption resulted in a significant decrease in the pathogenicity of F. s. pisi on pea.     

Dynamics of Fusarium solani cutinase investigated through structural comparison among different crystal forms of its variants

In characterizing mutants and covalently inhibited complexes of Fusarium solani cutinase, which is a 197-residue lipolytic enzyme, 34 variant structures, crystallizing in 8 different crystal forms, have been determined, mostly at high resolution. Taking advantage of this considerable body of information, a structural comparative analysis was carried out to investigate the dynamics of cutinase. Surface loops were identified as the major flexible protein regions, particularly those forming the active-site groove, whereas the elements constituting the protein scaffold were found to retain the same conformation in all the cutinase variants studied. Flexibility turned out to be correlated with thermal motion. With a given crystal packing environment, a high flexibility turned out to be correlated with a low involvement in crystal packing contacts. The high degree of crystal polymorphism, which allowed different conformations with similar energy to be detected, made it possible to identify motions which would have remained unidentified if only a single crystal form had been available. Fairly good agreement was found to exist between the data obtained from the structural comparison and those from a molecular dynamics (MD) simulation carried out on the native enzyme. The crystallographic approach used in this study turned out to be a suitable tool for investigating cutinase dynamics. Because of the availability of a set of closely related proteins in different crystal environments, the intrinsic drawback of a crystallographic approach was bypassed. By combining several static pictures, the dynamics of the protein could be monitored much more realistically than what can be achieved on the basis of static pictures alone. Proteins 26:442–458 © 1996 Wiley-Liss, Inc.