A simple and rapid harvesting method for microalgae by in situ magnetic separation

A simple and rapid harvesting method by in situ magnetic separation with naked Fe₃O₄ nanoparticles has been developed for the microalgal recovery of Botryococcus braunii and Chlorella ellipsoidea. After adding the magnetic particles to the microalgal culture broth, the microalgal cells were adsorbed and then separated by an external magnetic field. The maximal recovery efficiency reached more than 98% for both microalgae at a stirring speed of 120 r/min within 1 min, and the maximal adsorption capacity of these Fe₃O₄ nanoparticles reached 55.9 mg-dry biomass/mg-particles for B. braunii and 5.83 mg-dry biomass/mg-particles for C. ellipsoidea. Appropriate pH value and high nanoparticle dose were favorable to the microalgae recovery, and the adsorption mechanism between the naked Fe₃O₄ nanoparticles and the microalgal cells was mainly due to the electrostatic attraction. The developed in situ magnetic separation technology provides a great potential for saving time and energy associated with improving microalgal harvesting.     

Multifunctional Hybrid Fe2O3-Au Nanoparticles for Efficient Plasmonic Heating

One of the most widely used methods for manufacturing colloidal gold nanospherical particles involves the reduction of chloroauric acid (HAuCl₄) to neutral gold Au(0) by reducing agents, such as sodium citrate or sodium borohydride. The extension of this method to decorate iron oxide or similar nanoparticles with gold nanoparticles to create multifunctional hybrid Fe₂O₃-Au nanoparticles is straightforward. This approach yields fairly good control over Au nanoparticle dimensions and loading onto Fe₂O₃. Additionally, the Au metal size, shape, and loading can easily be tuned by changing experimental parameters (e.g., reactant concentrations, reducing agents, surfactants, etc.). An advantage of this procedure is that the reaction can be done in air or water, and, in principle, is amenable to scaling up. The use of such optically tunable Fe₂O₃-Au nanoparticles for hyperthermia studies is an attractive option as it capitalizes on plasmonic heating of gold nanoparticles tuned to absorb light strongly in the VIS-NIR region. In addition to its plasmonic effects, nanoscale Au provides a unique surface for interesting chemistries and catalysis. The Fe₂O₃ material provides additional functionality due to its magnetic property. For example, an external magnetic field could be used to collect and recycle the hybrid Fe₂O₃-Au nanoparticles after a catalytic experiment, or alternatively, the magnetic Fe₂O₃ can be used for hyperthermia studies through magnetic heat induction. The photothermal experiment described in this report measures bulk temperature change and nanoparticle solution mass loss as functions of time using infrared thermocouples and a balance, respectively. The ease of sample preparation and the use of readily available equipment are distinct advantages of this technique. A caveat is that these photothermal measurements assess the bulk solution temperature and not the surface of the nanoparticle where the heat is transduced and the temperature is likely to be higher.     

Tailoring size and structural distortion of Fe3O4 nanoparticles for the purification of contaminated water

Fe₃O₄ magnetic nanoparticles with different particle sizes were synthesized using two methods, i.e., a co-precipitation process and a polyol process, respectively. The atomic pair distribution analyses from the high-energy X-ray scattering data and TEM observations show that the two kinds of nanoparticles have different sizes and structural distortions. An average particle size of 6–8 nm with a narrow size distribution was observed for the nanoparticles prepared with the co-precipitation method. Magnetic measurements show that those particles are in ferromagnetic state with a saturation magnetization of 74.3 emu g⁻¹. For the particles synthesized with the polyol process, a mean diameter of 18–35 nm was observed with a saturation magnetization of 78.2 emu g⁻¹. Although both kinds of nanoparticles are well crystallized, an obviously higher structural distortion is evidenced for the co-precipitation processed nanoparticles. The synthesized Fe₃O₄ particles with different mean particle size were used for treating the wastewater contaminated with the metal ions, such as Ni(II), Cu(II), Cd(II) and Cr(VI). It is found that the adsorption capacity of Fe₃O₄ particles increased with decreasing the particle size or increasing the surface area. While the particle size was decreased to 8 nm, the Fe₃O₄ particles can absorb almost all of the above-mentioned metal ions in the contaminated water with the adsorption capacity of 34.93 mg/g, which is ∼7 times higher than that using the coarse particles. We attribute the extremely high adsorption capacity to the highly-distorted surface.     

A nanoparticle-based immobilization assay for prion-kinetics study

Magnetic and gold coated magnetic nanoparticles were synthesized by co-precipitation of ferrous and ferric chlorides, and by the micromicelles method, respectively. Synthesized nanoparticles were functionalized to bear carboxyl and amino acid moieties and used as prion protein carriers after carbodiimide activation in the presence of N-hydroxysuccinimide. The binding of human recombinant prion protein (huPrPrec) to the surface of these nanoparticles was confirmed by FTIR and the size and structures of the particles were characterized by transmission electron microscopy. Findings indicate that the rate of prion binding increased only slightly when the concentration of prion in the reaction medium was increased. Rate constants of binding were very similar on Fe₃O₄@Au and Fe₃O₄-LAA when the concentrations of protein were 1, 2, 1.5, 2.25 and 3.57 μg/ml. For a 5 μg/ml concentration of huPrPrec the binding rate constant was higher for the Fe₃O₄-LAA particles. This study paves the way towards the formation of prion protein complexes onto a 3-dimensional structure that could reveal obscure physiological and pathological structure and prion protein kinetics.     

A novel electroconductive interface based on Fe3O4 magnetic nanoparticle and cysteamine functionalized AuNPs: Preparation and application as signal amplification element to minoring of antigen‐antibody immunocomplex and biosensing of prostate cancer

In this study, a novel electroconductive interface was prepared based on Fe₃O₄ magnetic nanoparticle and cysteamine functionalized gold nanoparticle. The engineered interface was used as signal amplification substrate in the electrochemical analysis of antibody‐antigen binding. For this purpose, biotinilated‐anti‐prostate‐specific antigen (PSA) antibody was bioconjugated with iron oxide magnetic nanoparticles (Fe₃O₄) and drop‐casted on the surface of glassy carbon electrode (GCE). Also, secondary antibody (HRP‐Ab2) encapsulated on gold nanoparticles caped by cysteamine was immobilized on the surface of GCE modified electrode. A transmission electron microscopy images shows that a sandwich immunoreaction was done and binding of Ab1 and Ab2 performed successfully. Various parameters of immunoassay, including the loading of magnetic nanoparticles, the amount of gold nanoparticle conjugate, and the immunoreaction time, were optimized. The detection limit of 0.001 μg. L^?1 of PSA was obtained under optimum experimental conditions. It is found that such magneto‐bioassay could be readily used for simultaneous parallel detection of multiple proteins by using multiple inorganic metal nanoparticle tracers and are expected to open new opportunities for early stage diagnosis of cancer in near future.     

Highly sensitive electrochemiluminescence biosensors for cholesterol detection based on mesoporous magnetic core–shell microspheres

A sensitive electrochemiluminescence (ECL) biosensor for cholesterol detection based on multifunctional core–shell structured microspheres (Fe₃O₄@SiO₂–Au@mpSiO₂) is reported. This microsphere consisted of a core of silica-coated magnetite nanoparticle, an active transition layer of gold nanoparticles and a mesoporous silica shell. Scanning electron microscopy was employed to observe the morphology of the nanomaterials and transmission electron microscopy was used to further confirm the subtle structure of Fe₃O₄@SiO₂–Au@mpSiO₂. The microspheres possessed a large surface area that increased enzyme loading, and an active transition layer gold nanoparticles enhanced the ECL signal. They were used to immobilize cholesterol oxidase for cholesterol detection with a high sensitivity, low detection limit and wide linear range. The linear range was from 0.83 to 2.62 mM with a detection limit of 0.28 µM (S/N = 3). Moreover, the reproducibility, stability and selectivity of the biosensor were established.     

Label-free and homogeneous DNA hybridization detection using gold nanoparticles-based chemiluiminescence system

We find that the catalytic activity of gold nanoparticles (GNPs) on luminol-H₂O₂ chemiluminescence (CL) system is greatly enhanced after it is aggregated by 0.5 M NaCl. We use this observation to design a CL detection of DNA hybridization. It is based on that the single- and double-stranded oligonucleotides have different propensities to adsorb on GNPs in colloidal solution, and the hybridization occurred between the probe DNA and target DNA can result in aggregation of the GNPs, producing strong CL emission. In the assay, no covalent functionalization of the GNPs, the probe, or the target DNA is required. The assay, including hybridization and detection, occurs in homogenous solution. The detection limit of target DNA (3σ) was estimated to be as low as 1.1 fM. The sensitivity was increased more than 6 orders of magnitude over that of GNPs-based colorimetric method. The present CL method for DNA hybridization detection offers the advantages of being simple, cheap, rapid and sensitive.     

3D Porous γ‐Fe2O3@C Nanocomposite as High‐Performance Anode Material of Na‐Ion Batteries

A simple and template‐free method for preparing three‐dimensional (3D) porous γ‐Fe₂O₃@C nanocomposite is reported using an aerosol spray pyrolysis technology. The nanocomposite contains inner‐connected nanochannels and γ‐Fe₂O₃ nanoparticles (5 nm) uniformly embedded in a porous carbon matrix. The size of γ‐Fe₂O₃ nanograins and carbon content can be controlled by the concentration of the precursor solution. The unique structure of the 3D porous γ‐Fe₂O₃@C nanocomposite offers a synergistic effect to alleviate stress, accommodate large volume change, prevent nanoparticles aggregation, and facilitate the transfer of electrons and electrolyte during prolonged cycling. Consequently, the nanocomposite shows high‐rate capability and long‐term cyclability when applied as an anode material for Na‐ion batteries (SIBs). Due to the simple one‐pot synthesis technique and high electrochemical performance, 3D porous γ‐Fe₂O₃@C nanocomposites have a great potential as anode materials for rechargeable SIBs.     

Biological synthesis of gold nanoparticles using Magnolia kobus and Diopyros kaki leaf extracts

Leaf extracts of two plants, Magnolia kobus and Diopyros kaki, were used for ecofriendly extracellular synthesis of metallic gold nanoparticles. Stable gold nanoparticles were formed by treating an aqueous HAuCl₄ solution using the plant leaf extracts as reducing agents. UV–visible spectroscopy was used for quantification of gold nanoparticle synthesis. Only a few minutes were required for >90% conversion to gold nanoparticles at a reaction temperature of 95 °C, suggesting reaction rates higher or comparable to those of nanoparticle synthesis by chemical methods. The synthesized gold nanoparticles were characterized with inductively coupled plasma spectrometry (ICP), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and particle analysis using a particle analyzer. SEM and TEM images showed that a mixture of plate (triangles, pentagons, and hexagons) and spherical structures (size, 5–300 nm) were formed at lower temperatures and leaf broth concentrations, while smaller spherical shapes were obtained at higher temperatures and leaf broth concentrations.     

An electrochemical immunosensor for digoxin using core–shell gold coated magnetic nanoparticles as labels

A simple, sensitive, and low-cost immunosensor was designed for the detection of digoxin through core–shell gold coated magnetic nanoparticles (Fe₃O₄-Au-NPs) as an electrochemical label. Having had such a large potential for a variety of applications, Fe₃O₄-Au-NPs have attracted a considerable attention and are actively investigated recently. Digoxin is a cardiac glycoside which, at high level, can indicate an increased risk of toxicity. This new competitive electrochemical immunosensor was developed based on antigen–antibody reaction employing antigen (Ag) labeled Fe₃O₄-Au-NPs and PVA modified screen-printed carbon electrode surface in order to detect the serum digoxin. The structures of Fe₃O₄-Au-NPs were studied by transmission electron microscopy, X-ray diffraction and Fourier transformed infrared spectroscopy. Cyclic voltammetry and differential pulse voltammetry (DPV) were employed to determine the physicochemical and electrochemical properties of immunosensor. DPV was employed for quantitative detection of digoxin in biological samples. The developed immunosensor was capable to detect digoxin in the range from 0.5 to 5 ng mL^?1, with a detection limit as low as 0.05 ng mL^?1. The proposed method represented acceptable reproducibility, stability, and reliability for the rapid detection of digoxin in serum samples.     

In situ magnetic separation and immobilization of dibenzothiophene-desulfurizing bacteria

In situ cell separation and immobilization of bacterial cells for biodesulfurization were developed by using superparamagnetic Fe₃O₄ nanoparticles (NPs). The Fe₃O₄ NPs were synthesized by coprecipitation followed by modification with ammonium oleate. The surface-modified NPs were monodispersed and the particle size was about 13 nm with 50.8 emu/g saturation magnetization. After adding the magnetic fluids to the culture broth, Rhodococcus erythropolis LSSE8-1 cells were immobilized by adsorption and then separated with an externally magnetic field. The maximum amount of cell mass adsorbed was about 530 g dry cell weight/g particles to LSSE8-1 cells. Analysis showed that the nanoparticles were strongly absorbed to the surface and coated the cells. Compared to free cells, the coated cells not only had the same desulfurizing activity but could also be easily separated from fermentation broth by magnetic force. Based on the adsorption isotherms and Zeta potential analysis, it was believed that oleate-modified Fe₃O₄ NPs adsorbed bacterial cells mainly because of the nano-size effect and hydrophobic interaction.     

Biodesulfurization of Dibenzothiophene by Microbial Cells Coated with Magnetite Nanoparticles

Microbial cells of Pseudomonas delafieldii were coated with magnetic Fe₃O₄ nanoparticles and then immobilized by external application of a magnetic field. Magnetic Fe₃O₄ nanoparticles were synthesized by a coprecipitation method followed by modification with ammonium oleate. The surface-modified Fe₃O₄ nanoparticles were monodispersed in an aqueous solution and did not precipitate in over 18 months. Using transmission electron microscopy (TEM), the average size of the magnetic particles was found to be in the range from 10 to 15 nm. TEM cross section analysis of the cells showed further that the Fe₃O₄ nanoparticles were for the most part strongly absorbed by the surfaces of the cells and coated the cells. The coated cells had distinct superparamagnetic properties. The magnetization (δ_s) was 8.39 emu · g⁻¹. The coated cells not only had the same desulfurizing activity as free cells but could also be reused more than five times. Compared to cells immobilized on Celite, the cells coated with Fe₃O₄ nanoparticles had greater desulfurizing activity and operational stability.     

Transport of Intranasally Instilled Fine Fe2O3 Particles into the Brain: Micro-distribution, Chemical States, and Histopathological Observation

It has been demonstrated that inhaled fine (d < 2.5 μm) and ultrafine (d < 100 nm) particles produce more severe toxicity than coarse particles. Some recent data support the concept that the central nervous system (CNS) may be a target for the inhaled fine particulates. This work describes initial observation of the transport of intranasally instilled fine ferric oxide (Fe₂O₃) particles in animal brain. The iron micro-distribution and chemical state in the mice olfactory bulb and brain stem on day 14 after intranasal instillation of fine Fe₂O₃ particle (280 ± 80 nm) suspension at a single dose of 40 mg/kg body weight were analyzed by synchrotron radiation x-ray fluorescence and x-ray absorption near-edge structure (XANES). The micro-distribution map of iron in the olfactory bulb and brain stem shows an obvious increase of Fe contents in the olfactory nerve and the trigeminus of brain stem, suggesting that Fe₂O₃ particles were possibly transported via uptake by sensory nerve endings of the olfactory nerve and trigeminus. The XANES results indicate that the ratios of Fe (III)/Fe (II) were increased in the olfactory bulb and brain stem. The further histopathological observation showed that the neuron fatty degeneration occurred in the CA3 area of hippocampus. Such results imply an adverse impact of inhalation of fine Fe₂O₃ particles on CNS.     

Microfluidic immunosensor with gold nanoparticle platform for the determination of immunoglobulin G anti-Echinococcus granulosus antibodies

This article describes a microfluidic immunosensor, developed for the detection of IgG antibodies specific to Echinococcus granulosus in human serum samples, which represents an alternative tool that can be used for the immunodiagnosis of hydatidosis in an automated way. Our device consists of a Plexiglas system with a central channel and a gold electrode. For immobilization of the E. granulosus antigen, a gold electrode was modified with the incorporation of gold nanoparticles. Immobilized antigen was allowed to react with IgG-anti-E. granulosus antibodies in samples, and these were quantified by horseradish peroxidase (HRP) enzyme-labeled secondary antibodies specific to human IgG using catechol (Q) as enzymatic mediator. HRP in the presence of hydrogen peroxide (H₂O₂) catalyzes the oxidation of Q to o-benzoquinone (P). The electrochemical reduction back to Q was detected on the gold electrode (AuE) at −0.15 V. The current obtained was proportional to the activity of the enzyme and to the concentration of antibodies of interest. The detection limit for electrochemical detection was 0.091 ng ml⁻¹, and the within- and between-assay coefficients of variation were below 6.7%. The proposed system presents many benefits, the more relevant are: reduced complexity and costs that are considered as the most wanted features for the clinical-immunodiagnostic field.     

A Simple and Sensitive SPRS Method for Trace H2O2 Based on the TiO2+ Complex and Gold Nanoparticles Aggregation Reactions

In the medium of H₂SO₄ and in the presence of TiO²⁺, gold nanoparticles in size of 10 nm exhibited a weak surface plasmon resonance scattering (SPRS) peak at 775 nm. Upon addition of trace H₂O₂, the yellow complex [TiO(H₂O₂)]²⁺ formed that cause the gold nanoparticles aggregations to form bigger gold nanoparticle clusters in size of about 900 nm, and the SPRS intensity at 775 nm (I) enhanced greatly. The enhanced intensity ΔI was linear to the H₂O₂ concentration in the range of 0.025–48.7 μg/mL, with a detection limit of 0.014 μg/mL H₂O₂. This SPRS method was applied to determining H₂O₂ in water samples with satisfactory results.     

The function of chitosan/agarose biopolymer on Fe2O3 nanoparticles and evaluation of their effects on MCF-7 breast cancer cell line and expression of BCL2 and BAX genes

In recent decades, magnetic nanoparticles modified with biocompatible polymers have been recognized as a suitable tool for treating breast cancer. The aim of this research was to evaluate the function of chitosan/agarose-functionalized Fe₂O₃ nanoparticles on the MCF-7 breast cancer cell line and the expression of BCL2 and BAX genes. Free Fe₂O₃ nanoparticles were prepared by hydrothermal method. FTIR, XRD, SEM, DLS, VSM, and zeta potential analyses determined the size and morphological characteristics of the synthesized nanoparticles. The effect of Fe₂O₃ free nanoparticles and formulated Fe₂O₃ nanoparticles on induction of apoptosis was studied by double-dye Annexin V-FITC and PI. Also, the gene expression results using the PCR method displayed that Fe₂O₃ formulated nanoparticles induced BAX apoptosis by increasing the anti-apoptotic gene expression and decreasing the expression of pro-apoptotic gene BCL2, so the cell progresses to planned cell death. In addition, the results showed that the BAX/BCL2 ratio decreased significantly after treatment of MCF-7 cells with free Fe₂O₃ nanoparticles, and the BAX/BCL2 ratio for Fe₂O₃ formulated nanoparticles increased significantly. Also, to evaluate cell migration, the scratch test was performed, which showed a decrease in motility of MCF-7 cancer cells treated with Fe₂O₃ nanoparticles formulated with chitosan/agarose at concentrations of 10, 50, 100, and 200 μg/ml.     

Comparing recovering efficiency of immunomagnetic separation and centrifugation of mycobacteria in metalworking fluids

The accurate detection and enumeration of Mycobacterium immunogenum in metalworking fluids (MWFs) is imperative from an occupational health and industrial fluids management perspective. We report here a comparison of immunomagnetic separation (IMS) coupled to flow-cytometric enumeration, with traditional centrifugation techniques for mycobacteria in a semisynthetic MWF. This immunolabeling involves the coating of laboratory-synthesized nanometer-scale magnetic particles with protein A, to conjugate a primary antibody (Ab), specific to Mycobacterium spp. By using magnetic separation and flow-cytometric quantification, this approach enabled much higher recovery efficiency and fluorescent light intensities in comparison to the widely applied centrifugation technique. This IMS technique increased the cell recovery efficiency by one order of magnitude, and improved the fluorescence intensity of the secondary Ab conjugate by 2-fold, as compared with traditional techniques. By employing nanometer-scale magnetic particles, IMS was found to be compatible with flow cytometry (FCM), thereby increasing cell detection and enumeration speed by up to two orders of magnitude over microscopic techniques. Moreover, the use of primary Ab conjugated magnetic nanoparticles showed better correlation between epifluorescent microscopy counts and FCM analysis than that achieved using traditional centrifugation techniques. The results strongly support the applicability of the flow-cytometric IMS for microbial detection in complex matrices.

     

巨噬细胞膜仿生纳米铁颗粒制备及多形性胶质母细胞瘤MRI成像的初步实验研究

摘要 目的：探讨巨噬细胞膜仿生的纳米铁颗粒（Fe3O4 NCs@MM）对多形性胶质母细胞瘤MRI成像的研究。方法：制备巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM,利用动态光散射（Dynamic Light Scattering,DLS）和透射电子显微镜（Transmission Electron Microscope,TEM）对其水合动力学粒径、表面电势和形态进行表征。采用SDS-聚丙烯酰胺凝胶电泳（sodium dodecyl sulphate-polyacrylamide gel electrophoresis,SDS-PAGE）评价巨噬细胞膜的完整包覆;紫外可见光谱测定巨噬细胞膜仿生的纳米铁颗粒抗蛋白吸附能力。通过MRI成像系统,分析了含不同浓度的Fe元素（0.1-1.6 mM）的Fe₃O₄ NCs@MM在GSH存在或不存在时的T₁弛豫效应。采用细胞增殖-毒性实验（Cell Counting Kit-8,CCK-8）,测定巨噬细胞膜仿生纳米铁颗粒处理肿瘤细胞24 h后的细胞活性。尾静脉注射巨噬细胞膜仿生纳米铁颗粒至原位胶质母细胞瘤模型中,观察成像效果。结果：巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM的水合动力学粒径和表面电势分别为 286.5±7.6 nm和-20.7±3.5 mV,且在水溶液中分布均匀,具有较好的单分散性。包覆巨噬细胞膜的纳米铁颗粒具备抗蛋白吸附的能力。MRI成像显示,制备的巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM为GSH响应型MRI对比剂,具有较好的T₁-加权磁共振成像效果,在尾静脉注射巨噬细胞膜的纳米铁颗粒0.5 h后,肿瘤部位的信号可见增强。结论：巨噬细胞膜仿生的纳米铁颗粒Fe₃O₄ NCs@MM可实现多形性胶质母细胞瘤的MRI成像。     

High Reversible Lithium Storage Capacity and Structural Changes of Fe2O3 Nanoparticles Confined inside Carbon Nanotubes

The structural evolution of electrochemically prelithiated Fe₂O₃ nanoparticles confined in carbon nanotubes (CNTs) during lithium insertion/extraction is studied by in situ transmission electron microscopy. It is found that the aggregation and coarsening of Fe core‐containing Li₂O (Fe@Li₂O) nanograins formed during the charge process are prevented by the spatial restriction of the CNTs. A high reversible capacity of 2071 mA h g^?1 for the encapsulated Fe₂O₃ nanoparticles in CNTs is demonstrated when the material is used as the anode of lithium ion batteries. This is the highest reversible capacity ever reported for an Fe₂O₃ electrode. The significantly improved lithium storage capacity of the Fe₂O₃ nanoparticles is attributed to the extra lithium storage due to the enhanced interfacial lithium storage and reversible reaction of LiOH to form LiH and solid‐electrolyte‐interphase conversion originating from the nanoconfinement of CNTs as well as the very small particle size of the Fe@Li₂O nanograins and their good electrical contact with CNTs.     

Cerium oxide and iron oxide nanoparticles abolish the antibacterial activity of ciprofloxacin against gram positive and gram negative biofilm bacteria

Metal oxide nanoparticles have been suggested as good candidates for the development of antibacterial agents. Cerium oxide (CeO₂) and iron oxide (Fe₂O₃) nanoparticles have been utilized in a number of biomedical applications. Here, the antibacterial activity of CeO₂ and Fe₂O₃ nanoparticles were evaluated on a panel of gram positive and gram negative bacteria in both the planktonic and biofilm cultures. Additionally, the effect of combining CeO₂ and Fe₂O₃ nanoparticles with the broad spectrum antibiotic ciprofloxacin on tested bacteria was investigated. Thus, minimum inhibitory concentrations (MICs) of CeO₂ and Fe₂O₃ nanoparticles that are required to inhibit bacterial planktonic growth and bacterial biofilm, were evaluated, and were compared to the MICs of the broad spectrum antibiotic ciprofloxacin alone or in the presence of CeO₂ and Fe₂O₃ nanoparticles. Results of this study show that both CeO₂ and Fe₂O₃ nanoparticles fail to inhibit bacterial growth and biofilm biomass for all the bacterial strains tested. Moreover, adding CeO₂ or Fe₂O₃ nanoparticles to the broad spectrum antibiotic ciprofloxacin almost abolished its antibacterial activity. Results of this study suggest that CeO₂ and Fe₂O₃ nanoparticles are not good candidates as antibacterial agents, and they could interfere with the activity of important antibiotics.