Euglena sp. as a suitable source of lipids for potential use as biofuel and sustainable wastewater treatment

Prolific algal growth in sewage ponds with high organic loads in the tropical regions can provide cost-effective and efficient wastewater treatment and biofuel production. This work examines the ability of Euglena sp. growing in wastewater ponds for biofuel production and treatment of wastewater. The algae were isolated from the sewage treatment plants and were tested for their nutrient removal capability. Compared to other algae, Euglena sp. showed faster growth rates with high biomass density at elevated concentrations of ammonium nitrogen (NH₄-N) and organic carbon (C). Profuse growth of these species was observed in untreated wastewaters with a mean specific growth rate (μ) of 0.28 day^?1 and biomass productivities of 132 mg ?L^?1? day^?1. The algae cultured within a short period of 8 days resulted in the 98 % removal of NH₄-N, 93 % of total nitrogen 85 % of ortho-phosphate, 66 % of total phosphate and 92 % total organic carbon. Euglenoids achieved a maximum lipid content of 24.6 % (w/w) with a biomass density of 1.24 g ?L^?1 (dry wt.). Fourier transform infrared spectra showed clear transitions in biochemical compositions with increased lipid/protein ratio at the end of the culture. Gas chromatography and mass spectrometry indicated the presence of high contents of palmitic, linolenic and linoleic acids (46, 23 and 22 %, respectively), adding to the biodiesel quality. Good lipid content (comprised quality fatty acids), efficient nutrient uptake and profuse biomass productivity make the Euglena sp. as a viable source for biofuel production in wastewaters.     

Carbon, nitrogen and Greenhouse gases budgets over a four years crop rotation in northern France

Croplands mainly act as net sources of the greenhouse gases carbon dioxide (CO₂) and nitrous oxide (N₂O), as well as nitrogen oxide (NO), a precursor of troposheric ozone. We determined the carbon (C) and nitrogen (N) balance of a four-year crop rotation, including maize, wheat, barley and mustard, to provide a base for exploring mitigation options of net emissions. The crop rotation had a positive net ecosystem production (NEP) of 4.4?±?0.7 Mg C ha^-1 y^-1 but represented a net source of carbon with a net biome production (NBP) of -1.3?±?1.1 Mg C?ha^-1 y^-1. The nitrogen balance of the rotation was correlated with the carbon balance and resulted in net loss (?24?±?28 kg N ha^-1 y^-1). The main nitrogen losses were nitrate leaching (?11.7?±1.0 kg N ha^-1 y^-1) and ammonia volatilization (?9 kg N ha^-1 y^-1). Dry and wet depositions were 6.7?±?3.0 and 5.9?±0.1 kg N ha^-1 y^-1, respectively. Fluxes of nitrous (N₂O) and nitric (NO) oxides did not contribute significantly to the N budget (N₂O: -1.8?±?0.04; NO: -0.7?±?0.04 kg N ha^-1 y^-1) but N₂O fluxes equaled 16% of the total greenhouse gas balance. The link between the carbon and nitrogen balances are discussed. Longer term experiments would be necessary to capture the trends in the carbon and nitrogen budgets within the variability of agricultural ecosystems.     

Feasibility study of biogas upgrading coupled with nutrient removal from anaerobic effluents using microalgae-based processes

The present research was conducted to simultaneously optimize biogas upgrading and carbon and nutrient removal from centrates in a 180-L high-rate algal pond interconnected to an external CO₂ absorption unit. Different biogas and centrate supply strategies were assessed to increase biomass lipid content. Results showed 99 % CO₂ removal efficiencies from simulated biogas at liquid recirculation rates in the absorption column of 9.9 m³ m^?2 h^?1, concomitant with nitrogen and phosphorus removal efficiencies of 100 and 82 %, respectively, using a 1:70 diluted centrate at a hydraulic retention time of 7 days. The lipid content of the harvested algal–bacterial biomass remained low (2.9–11.2 %) regardless of the operational conditions, with no particular trend over time. The good settling characteristics of the algal–bacterial flocs resulted in harvesting efficiencies over 95 %, which represents a cost-effective alternative for algal biomass reutilization compared to conventional physical–chemical techniques. Finally, high microalgae biodiversity was found regardless of the operational conditions.     

The membraneless bioelectrochemical reactor stimulates hydrogen fermentation by inhibiting methanogenic archaea

The membraneless bioelectrochemical reactor (Ml-BER) is useful for dark hydrogen fermentation. The effect of the electrochemical reaction on microorganisms in the Ml-BER was investigated using glucose as the substrate and compared with organisms in a membraneless non-bioelectrochemical reactor (Ml-NBER) and bioelectrochemical reactor (BER) with a proton exchange membrane. The potentials on the working electrode of the Ml-BER and BER with membrane were regulated to ?0.9 V (versus Ag/AgCl) to avoid water electrolysis with a carbon electrode. The Ml-BER showed suppressed methane production (19.8?±?9.1 mg-C·L^?1·day^?1) and increased hydrogen production (12.6?±?3.1 mg-H·L^?1·day^?1) at pH_out 6.2?±?0.1, and the major intermediate was butyrate (24.9?±?2.4 mM), suggesting efficient hydrogen fermentation. In contrast, the Ml-NBER showed high methane production (239.3?±?17.9 mg-C·L^?1·day^?1) and low hydrogen production (0.2?±?0.0 mg-H·L^?1·day^?1) at pH_out 6.3?±?0.1. In the cathodic chamber of the BER with membrane, methane production was high (276.3?±?20.4 mg-C·L^?1·day^?1) (pH_out, 7.2?±?0.1). In the anodic chamber of the BER with membrane (anode-BER), gas production was low because of high lactate production (43.6?±?1.7 mM) at pH_out 5.0?±?0.1. Methanogenic archaea were not detected in the Ml-BER and anode-BER. However, Methanosarcina sp. and Methanobacterium sp. were found in Ml-NBER. Prokaryotic copy numbers in the Ml-BER and Ml-NBER were similar, as were the bacterial community structures. Thus, the electrochemical reaction in the Ml-BER affected hydrogenotrophic and acetoclastic methanogens, but not the bacterial community.     

Nutrient removal from high strength nitrate containing industrial wastewater using <Emphasis Type="Italic">Chlorella</Emphasis> sp. strain ACUF_802

the research aim of this study was to characterize an isolated native strain of Chlorella sp. ACUF_802, well adapted to a high nitrate concentration environment and to investigate its potential to nitrate and phosphate removal from industrial wastewaters with the minimal addition of chemical reagents and energy. The isolated strain was identified and evaluated for its capability to support biomass growth and nutrient removal from synthetic wastewater in batch tests using different concentrations of carbon and nitrogen, different carbon sources and N:P ratios. The strain was isolated via the plating method from the settler of a pilot scale moving bed biofilm reactor performing a nitrification process. The strain was identified using molecular analysis with rDNA primers. Using sodium bicarbonate as carbon source, the batch productivity (71.43 mg L^?1 day^?1) of the strain Chlorella sp. ACUF_802 was calculated with a logistic model and compared to the values reported in the literature. Assays on the effect of the N:P ratio indicated that the productivity was increased 36% when the N:P ratio was close to 1 (111.96 mg L^?1 day^?1), but for a complete phosphorus removal a 5:1 N:P ratio with nitrate concentrations ≤125 mg?L^?1 is recommended. The isolated microalgae strain Chlorella sp. ACUF_802 showed versatility to grow in the synthetic industrial wastewaters tested and can be considered as an appropriate organism for nitrogen removal from industrial wastewaters in the presence of an organic or inorganic carbon source.     

Biomass productivity of two <Emphasis Type="Italic">Scenedesmus</Emphasis> strains cultivated semi-continuously in outdoor raceway ponds and flat-panel photobioreactors

Semi-continuous algal cultivation was completed in outdoor flat-panel photobioreactors (panels) and open raceway ponds (raceways) from February 17 to May 7, 2015 for side-by-side comparison of areal productivities at the Arizona Center for Algae Technology and Innovation in Mesa, AZ, USA. Experiments used two strains of Scenedesmus acutus (strains LB 0414 and LB 0424) to assess productivity, areal density, nutrient removal, and harvest volume across cultivation systems and algal strains. Panels showed an average biomass productivity of 19.0?±?0.6 g m^?2 day^?1 compared to 6.62?±?2.3 g m^?2 day^?1 for raceways. Photosynthetic efficiency ranged between 1.32 and 2.24 % for panels and between 0.30 and 0.68 % for raceways. Panels showed an average nitrogen consumption rate of 38.4?±?8.6 mg N L^?1 day^?1. Cultivation in raceways showed a consumption rate of 3.8?±?2.5 and 7.1?±?4.2 mg N L^?1 day^?1 for February/March and April/May, respectively, due to increase in biomass productivity. Excess nutrients were required to prevent a decrease in productivity. Daily biomass harvest volumes between 18 and 36 % from panels did not affect culture productivity, but density decreased with increased harvest volume. High cultivation temperatures above 30 °C caused strain LB 0414 to lyse and crash. Strain LB 0424 did not show any difference in biomass productivity when peak temperatures reached 34, 38, or 42 °C, but showed decreased productivity when the peak temperature during cultivation was 30 °C. Using algal strains with different temperature tolerances can generate increased annual biomass productivity.     

Effects of different nitrogen, phosphorus, and iron concentrations and salinity on lipid production in newly isolated strain of the tropical green microalga, Scenedesmus dimorphus KMITL

The fatty acid composition, the effect of different concentrations of nitrogen (16.5-344 mg ?L^?1), phosphorus (9–45 mg? L^?1), iron (9–45 mg? L^?1) and salinity levels (0–20 psu) on lipid production in the green microalga Scenedesmus dimorphus KMITL, a new strain isolated from a tropical country, Thailand, were studied. The alga was isolated from a freshwater fish pond, and cultured in Chlorella medium by varying one parameter at a time. The main fatty acid composition of this strain was C16–C18 (97.52 %) fatty acids. A high lipid content was observed in conditions of 16.5 mg? L^?1-N, or 22 mg ?L^?1-P, or 45 mg ?L^?1-Fe, or 5 psu salinity, which accumulated lipids to 20.3?±?0.4, 19.4?±?0.2, 24.7?±?0.5, and 14.3?±?0.2 % of algal biomass, respectively. Increasing lipid content and lipid productivity was noted when the alga was cultured under high iron concentration and high salinity, as well as under reduced phosphorus conditions, whereas nitrogen limitation only resulted in an increased lipid content.     

Accumulation of anthocyanin in callus cultures of red-pod okra [<Emphasis Type="Italic">Abelmoschus esculentus</Emphasis> (L.) Hongjiao] in response to light and nitrogen levels

Nitrogen and light are critical determinants of biomass accumulation and secondary metabolite production under in vitro culture conditions. In this study, we analyzed the effects of varied concentrations of total nitrogen in Murashige and Skoog (MS) medium and light intensity on the production of biomass, anthocyanin pigments, and bioactive antioxidants in callus cultures of Abelmoschus esculentus cv. ‘Hongjiao’. Maximum callus biomass accumulation (3 g FW) was achieved when calluses were cultured on MS medium containing 60 mM nitrogen under 40 μmol m^??2 s^??1 light intensity. In contrast, maximum values of total anthocyanin accumulation (TA; 7.3 CV/g FW), total phenolic content (TP; 12.07 mg/100 g FW), total flavonoid content (TF; 2.47?±?0.15 mg/100 g FW), and total antioxidant activity (TAA; 56.10 μmol Trolox/g FW) were observed when calluses were cultured on MS medium containing 40 mM total nitrogen under 80 μmol m^??2 s^??1 light intensity. In addition, callus grown under same culture condition exhibited high flavonoid content along with increased phenolic content and antioxidant activity. High performance liquid chromatography (HPLC) was performed for qualitative and quantity analysis of callus cultures. Most of the pigments from the callus extracts were identical with pod anthocyanins, and appeared on the ODS-column HPLC with lower concentration than the main pigments of the pod tissues. These findings indicate that callus cultures of red-pod okra represent a potential source of bioactive compounds with antioxidant properties for industrial applications.     

Effect of Seawater–Sewage Cross-Transplants on Bacterial Metabolism and Diversity

Bioassays experiments were conducted to determine the metabolic and community composition response of bacteria to transplants between relatively pristine coastal seawater and sewage-impacted seawater. There were four treatments: (1) pristine seawater bacteria?+?pristine seawater (Pb?+?Pw), (2) sewage-impacted bacteria?+?sewage-impacted water (Sb?+?Sw), (3) pristine seawater bacteria?+?sewage-impacted water (Pb?+?Sw), and (4) sewage-impacted bacteria?+?pristine seawater (Sb?+?Pw). Sewage-derived DOC was more labile and readily utilized by bacteria, which favored the growth of high nucleic acid (HNA) bacteria, resulting in high bacterial production (BP, 113?±?4.92 to 130?±?15.8 μg C l^?1?day^?1) and low respiration rate (BR, <67?±?11.3 μg C l^?1?day^?1), as well as high bacterial growth efficiency (BGE, 0.68?±?0.09 to 0.71?±?0.05). In contrast, at the relatively pristine site, bacteria utilized natural marine-derived dissolved organic matter (DOM) at the expense of lowering their growth efficiency (BGE, <0.32?±?0.02) with low BP (<62?±?6.3 μg C l^?1?day^?1) and high BR 133?±?14.2 μg C l^?1?day^?1). Sewage DOM input appeared to alter the partitioning of carbon between respiration and production of bacteria, resulting in a shift toward higher BGE, which would not enhance oxygen consumption. Taxonomic classification based on 454 pyrosequencing reads of the 16S rRNA gene amplicons revealed that changes in bacterial community structure occurred when seawater bacteria were transferred to the eutrophic sewage-impacted water. Sewage DOM fueled the growth of Gammma-proteobacteria and Epsilson-proteobacteria and reduced the bacterial richness, but the changes in the community were not apparent when sewage-impacted bacteria were transferred to pristine seawater.     

Simultaneous energy recovery and autotrophic nitrogen removal from sewage at moderately low temperatures

This study assessed the technical feasibility of treating sewage with a combination of direct anaerobic treatment and autotrophic nitrogen removal, while simultaneously achieving energy recovery and nitrogen removal under moderately low temperatures. The concentrations of ammonia, nitrite, and COD in effluent were below 1, 0.1, and 30 mg/L, respectively. In the up-flow, anaerobic sludge fixed-bed, there was no obvious change observed in the total methane production at temperatures of 35?±?1 °C, 28?±?1 °C, 24?±?3 °C, and 17?±?3 °C, with the accumulation of volatile fatty acids occurring with decreasing temperatures. The control strategy employed in this study achieved a stable effluent with equimolar concentrations of nitrite and ammonium, coupled with high nitrite accumulation (>97 %) in the partial nitrification sequencing batch reactor system at moderately low temperatures. In the anaerobic ammonium oxidation (anammox) reactor, a short hydraulic retention time of 0.96 h, with a nitrogen removal rate of 0.83 kgN/(m³/day) was achieved at 12–15 °C. At low temperatures, the corresponding fluorescence in situ hybridization image revealed a high amount of anammox bacteria. This study demonstrates that efficient nitrogen removal and energy recovery from sewage at moderately low temperatures can be achieved by utilizing a combined system. Additionally, this system has the potential to become energy-neutral or even energy-producing.     

Coupling microbial fuel cells with a membrane photobioreactor for wastewater treatment and bioenergy production

Microbial fuel cells (MFCs) and membrane photobioreactors are two emerging technologies for simultaneous wastewater treatment and bioenergy production. In this study, those two technologies were coupled to form an integrated treatment system, whose performance was examined under different operating conditions. The coupled system could achieve 92–97 % removal of soluble chemical oxygen demand (SCOD) and nearly 100 % removal of ammonia. Extending the hydraulic retention time (HRT) of the membrane photobioreactor to 3.0 days improved the production of algal biomass from 44.4 ± 23.8 to 133.7 ± 12.9 mg L^?1 (based on the volume of the treated water). When the MFCs were operated in a loop mode, their effluent (which was the influent to the algal reactor) contained nitrate and had a high pH, leading to the decreased algal production in the membrane photobioreactor. Energy analysis showed that the energy consumption was mainly due to the recirculation of the anolyte and the catholyte in the MFCs and that decreasing the recirculation rates could significantly reduce energy consumption. The energy production was dominated by indirect electricity generation from algal biomass. The highest energy production of 0.205 kWh m^?3 was obtained with the highest algal biomass production, resulting in a theoretically positive energy balance of 0.033 kWh m^?3. Those results have demonstrated that the coupled system could be an alternative approach for energy-efficient wastewater treatment and using wastewater effluent for algal production.     

Growth,pigments, and biochemical composition of marine red alga Gracilaria crassa

The marine red alga Gracilaria crassa was investigated for its proximate composition, minerals, fatty acids, amino acids, and agar content to decipher its nutritional implications. The growth performance and pigments were studied under different combinations of temperature and salinity. On a dry weight basis the total lipid content was 1.30?±?0.05 %, protein was 5.18?±?0.64 %, carbohydrate was 42.0?±?1.2 %, ash was 43.18?±?1.15 %, and agar content was 21.52?±?0.73 %. Appreciable amounts of macro-, micro-nutrients (K?>?Na, Ca, Mg, and Fe), and essential amino acids (Ileu, His, Thr, Leu, and Lys) were found. Palmitic, stearic acid, and arachidonic acid were major fatty acids detected. The alga showed maximum daily growth rate (DGR %) 5.8?±?0.09 % at 25 °C, 35 ‰ salinity. The highest content of pigment R-phycoerythrin (444.7?±?1.9 μg g^?1 fresh weight (FW) basis) was obtained at 25 ‰ salinity at 35 °C while that of R-phycocyanin (476.3?±?2.3 μg g^?1 DW) at 30 ‰ salinity at 30 °C. This study revealed that this alga can be utilized as a potential source for food and feed. The data generated on best growth conditions will be very useful for farming of G. crassa in open sea. This alga could be used for production of natural colorants at defined control condition.     

Batch biological treatment of nitrogen deficient synthetic wastewater using Azotobacter supplemented activated sludge

Biological treatment of nitrogen deficient wastewaters are usually accomplished by external addition of nitrogen sources to the wastewater which is an extra cost item. As an alternative for effective biological treatment of nitrogen deficient wastewaters, the nitrogen fixing bacterium, Azotobacter vinelandii, was used in activated sludge and also in pure culture. Total organic carbon (TOC) removal performances of Azotobacter-added and free activated sludge cultures were compared at different initial TN/TOC ratios. The rate and extent of TOC removal were comparable for all cultures when initial TN/TOC ratio was larger than 0.12; however, both the rate and extent of TOC removal from nitrogen deficient (TN/TOC<12%) synthetic wastewater were improved by using Azotobacter-added activated sludge as compared to the Azotobacter-free activated sludge culture. More than 90% TOC removal was obtained with pure Azotobacter or Azotobacter-added activated sludge culture from a nitrogen deficient synthetic wastewater.     

Phycoremediation of dairy and winery wastewater using <Emphasis Type="Italic">Diplosphaera</Emphasis> sp. MM1

A new green microalgal species was isolated, identified and investigated for its biomass production and nutrient removal efficiency in dairy and winery wastewater in this study. The 18S rRNA-based phylogenetic analysis revealed that this new strain is a Diplosphaera sp. and was designated strain MM1. The growth of this strain was evaluated in different diluted dairy and winery wastewaters. The highest algal biomass production (up to 2.3 g L^?1) was obtained in dairy wastewater (D3; dairy wastewater 1:2 deionised water) after 14 days of culture. However, for winery wastewater, the highest algal biomass production (up to 1.46 g L^?1) was obtained in wastewater combination W2 (winery wastewater 1:1 deionised water) after 14 days of culture. Turbid dairy wastewater with high concentration of nitrogen and phosphorous slowed down the initial growth of the alga. However, at the end of day 14, biomass production was nearly twofold higher than that of winery wastewater. The findings from both types of wastewater suggest that Diplosphaera sp. MM1 has potential for its application in generating biomass with simultaneous remediation of nutrient-rich wastewater.     

The role of hydrodynamic sorting on the accumulation and distribution of organic carbon in an impoundment: Englebright Lake,California, USA

The global proliferation of dams is one of the most significant anthropogenic impacts on the environment, resulting in the trapping of massive loads of sediment and nutrients in impoundments. Few studies, however, have examined these impounded sediments to understand patterns of organic carbon (OC) accumulation and the effects of watershed processes on carbon delivery. This study measured total organic carbon (TOC) and stable isotopes of carbon and nitrogen (δ¹³C and δ¹⁵N) in Englebright Lake, CA to relate changes in OC sources and TOC accumulation to natural and anthropogenic events in the watershed and to depositional processes in the lake. Englebright Lake is a representative system for impoundments in small, mountainous rivers, and anthropogenic disturbances in the watershed caused high sediment accumulation rates in the lake. Throughout its 60-year history, 0.35 Tg OC has been trapped behind Englebright Dam and δ¹³C signatures indicate that more than 50% of the OC in Englebright Lake was derived from terrigenous sources. TOC content ranged from 0.03 to 30.24% of dry weight, and differed across depositional regimes; TOC content in topset deposits (0.35 ± 0.58%) was less than in foreset (2.64 ± 5.95%) and bottomset (1.51 ± 1.41%) deposits (p < 0.001) and TOC accumulation associated with flood events was higher (up to 231 kg_OC m^?2 year^?1) than during non-event periods (0.2 to 39 kg_OC m^?2 year^?1). TOC accumulation rates in Englebright Lake were up to an order of magnitude higher than previous estimates of OC burial in California impoundments. As the number and size of dams continues to expand worldwide, the storage of TOC in impoundments will likely add to the growing number of anthropogenic modifications to the global carbon cycle.     

Cyanophycin production from feather hydrolysate using biotechnological methods

Abstract

Cyanophycin is a bacterial storage polymer for carbon, nitrogen and energy with emerging industrial applications. As efficient cyanophycin production is enhanced by peptone, but commercial peptones are very expensive, thereby increasing the overall production cost, an enzymatically produced feather hydrolysate (FH) is assessed as a cheap replacement of peptone to lower the costs and make cyanophycin production more economically feasible. Keratinase production using feather as the sole carbon/nitrogen source by S.pactum 40530 at 30-L fermentation scale was achieved within 93?h with degradation rate of 96.5%. A concentration of 60?g/L of FH, generated by keratinolytic activity (8?×?10³?U?g^?1L^?1d^?1) within 24?h, was used as the main carbon/peptone source to produce cyanophycin. The growth performances of E. coli DapE/L using FH was compared to that of casamino acids (CA) and up to 7.1?±?0.4 and 5.3?±?0.3?g/L of cell mass were obtained after 72?h from FH and CA, respectively. Cyanophycin production yielded 1.4?±?0.1g/L for FH with average molecular mass of 28.8 and 1.4?±?0.2 for CA with average molecular mass of 35.3, after 60?h. For the first time, FH generated by biotechnological methods from environmentally problematic, abundant and renewable feather bioresource was successfully used for cyanophycin biopolymer production.     

Algal biomass: A sustainable,economical and renewable approach for microbial production of pectinolytic enzymes using submerged and solid state fermentation techniques

In the past decade, algal waste has been used as useful natural resource for production of enormous range of products that have wide economical and commercial importance. Pectinases are group of enzymes that have wide commercial applications. Hence, current study was designed to utilize algal biomass for the production of pectinases using submerged (SmF) and solid state fermentation (SSF) techniques. Different algal sources including brown (Dictyopteris polypodioides, Sargassum wightii and Dictyopteris divaricata) and green algae (Ulva lactuca and Codium tomentosum) were used and U. lactuca was found to be the most suitable substrate. Several bacterial and fungal strains were screened and among them Bacillus licheniformis KIBGE-IB4 was selected based on maximum pectinase production. SmF and SSF were studied utilizing U. lactuca as a substrate and results revealed that enzyme production was favoured by SmF (2457?±?3.31?U?mg^?1) as compared to SSF (1432?±?1.46?U?mg^?1). Parametric optimization of pectinase production indicated that B. licheniformis KIBGE-IB4 requires 10.0?g L^–1 U. lactuca as a biomass in the medium with a pH 7.0 when incubated at 37?°C for 24 hours. Likewise, production of pectinase using algal resource was also compared with that of the conventional agricultural biomass and it was observed that when U. lactuca was used, the selected bacterial isolate produced a higher yield of enzyme than sugarcane bagasse and rice husk. Hence, it is anticipated that algal biomass can be efficiently utilized as an environmental friendly bioresource for the production of industrially important hydrolytic enzymes.     

Algae-based biofilm productivity utilizing dairy wastewater: effects of temperature and organic carbon concentration

Background

Biofilm-based microalgal growth was determined as functions of organic chemical loading and water temperature utilizing dairy wastewater from a full-scale dairy farm. The dairy industry is a significant source of wastewater worldwide that could provide an inexpensive and nutrient rich feedstock for the cultivation of algae biomass for use in downstream processing of animal feed and aquaculture applications. Algal biomass was cultivated using a Rotating Algal Biofilm Reactor (RABR) system. The RABR is a biofilm-based technology that has been designed and used to remediate municipal wastewater and was applied to treat dairy wastewater through nutrient uptake, and simultaneously provide biomass for the production of renewable bioproducts.

Results

Aerial algal biofilm growth rates in dairy wastewater at 7 and 27 °C temperatures were shown to be 4.55?±?0.17 g/m²-day and 7.57?±?1.12 g/m²-day ash free dry weight (AFDW), respectively. Analysis of Variance (ANOVA) calculations indicated that both an increase in temperature of the wastewater and an increase in the level of organic carbon, from 300 to 1200 mg L^-1, contributed significantly to an increase in the rate of biomass growth in the system. However, ANOVA results indicated that the interaction of temperature and organic carbon content was not significantly related to the biofilm-based growth rate.

Conclusion

A microalgae-based biofilm reactor was successfully used to treat turbid dairy wastewater. Temperature and organic carbon concentration had a statistically significant effect on algae-based biofilm productivity and treatment of dairy wastewater. The relationships between temperature, TOC, and productivity developed in this study may be used in the design and assessment of wastewater remediation systems and biomass production systems utilizing algae-based biofilm reactors for treating dairy wastes.

     

Effects of fungal-assisted algal harvesting through biopellet formation on pesticides in water

Recent research has demonstrated the potential of using filamentous fungi to form pellets with microalgae (biopellets), in order to facilitate harvesting of microalgae from water following algae-based treatment of wastewater. In parallel, there is a need to develop techniques for removing organic pollutants such as pesticides and pharmaceuticals from wastewater. In experiments using the microalga Chlorella vulgaris, the filamentous fungus Aspergillus niger and biopellets composed of these microorganisms, this study investigated whether fungal-assisted algal harvesting can also remove pesticides from contaminated water. A mixture of 38 pesticides was tested and the concentrations of 17 of these were found to be reduced significantly in the biopellet treatment, compared with the control. After harvesting, the concentration of total pesticides in the algal treatment did not differ significantly from that in the control. However, in the fungal treatment and biopellet treatment, the concentration was significantly lower (59.6?±?2.0 µg/L and 56.1?±?2.8 µg/L, respectively) than in the control (66.6?±?1.0 µg/L). Thus fungal-assisted algal harvesting through biopellet formation can also provide scope for removing organic pollutants from wastewater, with removal mainly being performed by the fungus.     

Effects of stationary phase elongation and initial nitrogen and phosphorus concentrations on the growth and lipid-producing potential of Chlorella sp. HQ

Higher lipid production and nutrient removal rates are the pursuing goals for synchronous biodiesel production and wastewater treatment technology. An oleaginous alga Chlorella sp. HQ was tested in five different synthetic water, and it was found to achieve the maximum biomass (0.27 g L^?1) and lipid yield (41.3 mg L^?1) in the synthetic secondary effluent. Next, the effects of the stationary phase elongation and initial nitrogen (N) and phosphorus (P) concentrations were investigated. The results show that the algal characteristics were affected apparently under different N concentrations but not P, which were verified by Logistic and Monod models. At the early stationary phase, the algal biomass, lipid and triacylglycerols (TAGs) yields, and P removal efficiency increased and reached up to 0.19 g L^?1, 46.7 mg L^?1, 14.3 mg L^?1, and 94.3 %, respectively, but N removal efficiency decreased from 86.2 to 26.8 % under different N concentrations. And the largest TAGs yield was only 6.4 mg L^?1 and N removal efficiency was above 71.1 % under different P concentrations. At the late stationary phase, the maximal biomass, lipid and TAGs yields, and P removal efficiencies primarily increased as the initial N and P concentrations increase and climbed up to 0.49 g L^?1, 99.2 mg L^?1, 54.0 mg L^?1, and 100.0 %, respectively. It is concluded that stationary phase elongation is of great importance and the optimal initial N/P ratio should be controlled between 8/1 and 20/1 to serve Chlorella sp. HQ for better biodiesel production and secondary effluent purification.