疱疹病毒定量PCR的建立

A single pair of oligonucleatide primer selected within a highly conserved region of the DNA polymerase gene in herpesviruses was synthesized. The competitive template DNA purified from cytomegalovirus (CMV) DNA was used to carry out competiitve PCR amplification with herpes simplex virus type 1 (HSV1) DNA (target sequences). And anti-HSV1 effects of acyclovir (ACV) was investigated by the method.The results showed that the efficacy of PCR amplification was equal to each other(the ratio of the quantity of c…     

Effect of primer mismatch, annealing temperature and PCR cycle number on 16S rRNA gene-targetting bacterial community analysis

In the attempt to explore complex bacterial communities of environmental samples, primers hybridizing to phylogenetically highly conserved regions of 16S rRNA genes are widely used, but differential amplification is a recognized problem. The biases associated with preferential amplification of multitemplate PCR were investigated using 'universal' bacteria-specific primers, focusing on the effect of primer mismatch, annealing temperature and PCR cycle number. The distortion of the template-to-product ratio was measured using predefined template mixtures and environmental samples by terminal restriction fragment length polymorphism analysis. When a 1 : 1 genomic DNA template mixture of two strains was used, primer mismatches inherent in the 63F primer presented a serious bias, showing preferential amplification of the template containing the perfectly matching sequence. The extent of the preferential amplification showed an almost exponential relation with increasing annealing temperature from 47 to 61 degrees C. No negative effect of the various annealing temperatures was observed with the 27F primer, with no mismatches with the target sequences. The number of PCR cycles had little influence on the template-to-product ratios. As a result of additional tests on environmental samples, the use of a low annealing temperature is recommended in order to significantly reduce preferential amplification while maintaining the specificity of PCR.     

PRISE2: Software for designing sequence-selective PCR primers and probes

Background

PRISE2 is a new software tool for designing sequence-selective PCR primers and probes. To achieve high level of selectivity, PRISE2 allows the user to specify a collection of target sequences that the primers are supposed to amplify, as well as non-target sequences that should not be amplified. The program emphasizes primer selectivity on the 3’ end, which is crucial for selective amplification of conserved sequences such as rRNA genes. In PRISE2, users can specify desired properties of primers, including length, GC content, and others. They can interactively manipulate the list of candidate primers, to choose primer pairs that are best suited for their needs. A similar process is used to add probes to selected primer pairs. More advanced features include, for example, the capability to define a custom mismatch penalty function. PRISE2 is equipped with a graphical, user-friendly interface, and it runs on Windows, Macintosh or Linux machines.

Results

PRISE2 has been tested on two very similar strains of the fungus Dactylella oviparasitica, and it was able to create highly selective primers and probes for each of them, demonstrating the ability to create useful sequence-selective assays.

Conclusions

PRISE2 is a user-friendly, interactive software package that can be used to design high-quality selective primers for PCR experiments. In addition to choosing primers, users have an option to add a probe to any selected primer pair, enabling design of Taqman and other primer-probe based assays. PRISE2 can also be used to design probes for FISH and other hybridization-based assays.     

Development of a multiple internal control for clinical diagnostic real-time amplification assays

A major pitfall in most published genomic amplification methods for the detection and identification of human pathogens is that they do not include an internal amplification control in order to achieve an acceptable level of confidence for the absence of false-negative results. By applying composite primer technology, a single multiple internal amplification control DNA molecule was constructed to detect and quantify the hepatitis B virus, human polyomavirus, Epstein-Barr virus, Toxoplasma gondii and cytomegalovirus using real-time PCR. The multiple internal amplification control contains all forward and reverse primer binding regions targeted in the five distinct duplex PCRs, but with a unique probe hybridization site. Multiple internal amplification control detection sensitivity, assessed by Probit analysis, was 58 copies per PCR, associated with an extremely wide dynamic range (8 log(10) units). Moreover, in testing 614 patient samples, PCR inhibition occurred at a frequency of 0-8.8%. Similar multiple internal amplification controls for quantitative PCR-based assays could be designed to accommodate any infectious profiles in a particular institution as they are easy to make and inexpensive.     

DNA probes for the identification of microorganisms

Summary The detection and identification of microorganisms is being carried out increasingly using DNA. Each organism has a unique DNA sequence which can be used to distinguish closely related organisms. Using PCR amplification and sequencing of ribosomal RNA genes we have developed DNA probes for a number of pathogenic bacteria and fungi. The development of DNA assays based on PCR has resulted in new questions which must be addressed including process carry-over contamination and inhibition of the PCR amplification reaction once the problems associated with the implementation of DNA assays are ironed out.     

Development of a multiplex and real time PCR assay for the specific detection of Arcobacter butzleri and Arcobacter cryaerophilus

A new multiplex PCR and two specific TaqMan assays were developed to target the emerging pathogens A. butzleri and A. cryaerophilus. The assays also included an internal control to verify the presence of bacterial target DNA and amplification integrity. The multiplex assay used a published primer set (CRY1 and CRY2) for detecting A. cryaerophilus DNA (Houf, K., Tutenel, A., De Zutter, L., Van Hoof, J. and Vandamme, P., 2000. Development of a multiplex PCR assay for the simultaneous detection and identification of Arcobacter butzleri, Arcobacter cryaerophilus and Arcobacter skirrowii. FEMS microbiology letters, 193 (1): 89-94.) and a novel A. butzleri primer set designed to target the rpoB/C gene sequences. To improve sample throughput and assay sensitivity a TaqMan assay for each Arcobacter spp. was developed which again utilised the heterogeneity contained in the rpoB/C and 23s rRNA gene sequences. The two TaqMan assays provided >2 log improvement in detection sensitivity for both Arcobacter spp. compared with the multiplex PCR assay and were able to detect <10 CFU per PCR reaction. To evaluate the effectiveness of the Arcobacter TaqMan assays with field isolates the assays were used to screen DNA samples prepared from faecal, hide and environmental samples obtained from two meat processing plants. In these studies, the TaqMan assays revealed that 2/150 (1.3%) samples were A. butzleri-positive, 11/150 (7.3%) were A. cryaerophilus-positive and the identity of generated amplicons was confirmed by DNA sequencing. Our results show that these TaqMan assays provide improvements in sensitivity and species-representation over other published Arcobacter PCR assays and they are compatible with detecting Arcobacters in sub-optimal matrices.     

食品中沙门氏菌分子检测靶点的筛选与评价

[目的]发掘新的沙门氏菌分子检测靶点,筛选检测性能优秀的引物.[方法]利用BLAST程序比较沙门氏菌属内基因组DNA序列的同源性以及沙门氏菌与非沙门氏菌基因组DNA序列之间的特异性,发掘出100多个检测沙门氏菌属的特异性片段,并从中随机挑选出15个片段作为候选靶点,一共设计了27对引物(FS1～FS27),对它们的特异性、灵敏度加以评价,从中筛选检测性能最好的引物.[结果]在27对引物中,检测性能最优的引物为FS23,采用该引物对供试菌株的相应检测靶点进行PCR扩增,44株沙门氏菌都能扩增到一条492 bp特异性片段,而22株非沙门氏菌则不能扩增出这一特异性片段.以FS23为引物建立PCR方法检测猪霍乱沙门氏菌基因组DNA的灵敏度为11.9 fg/μL,细菌纯培养物灵敏度为4.9×102cfu/mL;用猪霍乱沙门氏菌人工污染牛奶样品,如果接种起始菌量为100 cfu/25 mL时,只需要增菌5 h,采用上述方法即能检测出沙门氏菌.[结论]引物FS23对应的基因序列是一个性能优良的新分子检测靶点,具备很高的特异性和灵敏性,能够广泛应用于食品中沙门氏菌的快速检测.     

Targeting polyketide synthase gene pool within actinomycetes: new degenerate primers

Natural products provide a unique element of molecular diversity and biological functionality and they are still indispensable for drug discovery. The polyketides, comprising a large and structurally diverse family of bioactive natural products, have been isolated from a group of mycelia-forming Gram-positive microorganisms, the actinomycetes. Relatively high amino acid sequence identity of the actinomycetes type I polyketide synthases (PKSs) was used to design three degenerate primer pairs for homology-based PCR detection of novel PKS genes, with particular interest into PKSs involved in biosynthesis of immunosuppressive-like metabolites. The stepdown PCR method, described here, enables fast insight into the PKS arsenal within actinomycetes. Designed primers and stepdown PCR were applied for the analysis of two natural isolates, Streptomyces sp. strains NP13 and MS405. Sequence analysis of chosen clones revealed the presence of two distinctive sequences in strain Streptomyces sp. NP13, but only one of these showed homology to PKS-related sequences. On analysing PCR amplicons derived from Streptomyces sp. strain MS405, three different PKS-related sequences were identified demonstrating a potential of designed primers to target PKS gene pool within single organism.     

IDENTIFICATION OF NEW TARGET SEQUENCES FOR PCR DETECTION OF VIBRIO PARAHAEMOLYTICUS BY GENOME COMPARISON

A genome comparison method was used to identify specific target sequences for the polymerase chain reaction (PCR) detection of Vibrio parahaemolyticus, and the CDS value of this bacterium was compared with that of 139 other bacterial genomes. It was found that 20 CDS of V. parahaemolyticus were relatively specific according to their E value in BLAST (a new tool for comparing protein and nucleotide sequences), and four of them were selected for the design of PCR primers. There were positive amplification products of these four pairs of primers from nine V. parahaemolyticus strains, whereas there were no amplification products from nine other Vibrionaceae strains and four non -Vibrionaceae strains. An evaluation of detection sensitivities revealed that these four pairs of primers can be used in a PCR assay for the detection of V. parahaemolyticus.

PRACTICAL APPLICATIONS

An automatic BLAST method was developed in this study, by which species-specific sequences can be screened out rapidly. In this way, new and specific genes of Vibrio parahaemolyticus were identified to be used as target sequences for PCR detection. In terms of acceptable specificity and sensitivity, the four pairs of primers were selected by screening, which can be applied in PCR assays and other molecular methods. These kinds of methods might become commercial detection products in the new future. In addition, this method for searching specific DNA sequences can also be used for the mining specific sequences in other genus and species, such as Salmonella , Staphylococcus , etc.     

A simple and efficient method to determine the terminal sequences of restriction fragments containing known sequences.

We present an improvement of the inverse PCR method for the determination of end sequences of restriction fragments containing unknown DNA sequences flanked by known segments. In this approach, a short "bridge" DNA is inserted during the self-ligation step of the inverse PCR technique. This bridge DNA acts as primer annealing sites for amplification and subsequent direct sequencing. Successive PCR amplifications enable selective amplification of the unknown sequences from a complex mixture. Unlike previously described methods, our method does not require special materials, such as synthetic adapters or biotinylated primers that must be prepared each time to adapt the target. Furthermore, no complex steps such as dephosphorylation or purification are needed. Our method can save time and reduce the cost of cloning unknown sequences; it is ideal for routine, rapid gene walking. We applied this method to a GC-rich bacterial genome and succeeded in determining the end sequences of a 4.5-kb fragment.     

Comparative Sensitivity of PCR Primer Sets for Detection of Cryptosporidium parvum

Improved methods for detection of Cryptosporidium oocysts in environmental and clinical samples are urgently needed to improve detection of cryptosporidiosis. We compared the sensitivity of 7 PCR primer sets for detection of Cryptosporidium parvum. Each target gene was amplified by PCR or nested PCR with serially diluted DNA extracted from purified C. parvum oocysts. The target genes included Cryptosporidium oocyst wall protein (COWP), small subunit ribosomal RNA (SSU rRNA), and random amplified polymorphic DNA. The detection limit of the PCR method ranged from 10³ to 10⁴ oocysts, and the nested PCR method was able to detect 10⁰ to 10² oocysts. A second-round amplification of target genes showed that the nested primer set specific for the COWP gene proved to be the most sensitive one compared to the other primer sets tested in this study and would therefore be useful for the detection of C. parvum.     

重要肠道病原菌多重PCR-基因芯片检测方法研究

目的:建立并初步评价一种针对重要肠道病原菌的多重PCR 基因芯片检测方法。方法：对筛选出的特异引物进行多重PCR优化,将引物分别按种属内混合和种属间混合的方案排查引物间的竞争性抑制现象,再将不同菌属的模板混合,用相对应的混合引物扩增,探寻高效特异的引物组合。分别掺入和不掺入荧光素,验证其对混合PCR反应的影响,并与芯片杂交,探寻多重PCR扩增效率对芯片杂交的影响。分析不同数量引物组合产生的杂交结果,筛选出无交叉反应的最优引物组合。结果:种属内引物混合均得到特异性扩增结果。种属间混合霍乱弧菌和空肠弯曲菌得到部分预期条带,随着混合引物数量的增加,交叉抑制现象也增多。杂交信号强度随多重PCR扩增效率的增加而增强。反应中掺入荧光素的扩增条带产量低于无荧光素的产物。可将35对混合引物拆成3个体系分别标记样品,以避免假阴性结果。结论:PCR反应中掺入荧光素降低扩增效率和杂交效率,但并不影响对杂交结果的判读和数据分析。基因芯片杂交信号强度取决于多重PCR的扩增效率。肠道病原菌多重PCR 基因芯片检测方法具有较高的特异性,混合PCR可以分别按照种属内和种属间的引物组合方案用于多病原的筛检。该基因芯片检测可以采用3个引物体系完成样品标记。     

PCR detection of psychrophilic Clostridium spp. causing 'blown pack' spoilage of vacuum-packed chilled meats

AIMS: To develop a practical molecular procedure that directly, without isolation, and specifically detects the presence of clostridia which cause 'blown pack' spoilage of vacuum-packed meat. METHODS AND RESULTS: Primer sets and PCR amplification procedures were developed that detect the presence of 16S rDNA gene and/or 16S-23S rDNA internal transcribed spacer fragments of 'blown pack' causing clostridia in meat. The specificity of the developed procedures was evaluated with DNA obtained from close phylogenetic neighbours of 'blown pack' causing clostridia, food clostridia and common meat spoilage microorganisms. The sensitivity of detection was assessed in non-enriched and low-temperature-enriched beef mince inoculated with serially diluted pure cultures of Clostridium estertheticum DSMZ 8809T and Cl. gasigenes DB1AT. The efficacy of detection procedures was evaluated for naturally contaminated vacuum-packed meat samples. Three primer sets, 16SE, 16SDB and EISR, produced amplicons of the expected size with DNA templates from target clostridia, but failed to yield PCR products with DNAs from any other microorganisms tested. With 16SE and 16SDB primers, minimum levels of detection were 104 CFU g(-1) for non-enriched, and 102 CFU g(-1) for enriched meat samples. Based on the established specificity of these primers, as well as DNA sequencing of amplicons, Cl. gasigenes was confirmed as the causative agent of 'blown pack' spoilage in two packs, and Cl. estertheticum as the causative agent in the third. CONCLUSIONS: The developed method can be used for rapid detection of 'blown pack' causing clostridia in commercial blown packs, or following low temperature enrichment, for detection of these microorganisms in meat containing as few as 100 clostridial cells per gram. SIGNIFICANCE AND IMPACT OF THE STUDY: The paper reports practical procedures that can be used for rapid confirmation of the causative agents of clostridial 'blown pack' spoilage in commercial spoiled packs, or for detection of psychrophilic clostridia in epidemiological trace back of 'blown pack' spoilage incidents in meat processing plants.     

A proportional analysis method using non-kinetic real-time PCR

Prompted by increasing interest in proportional analysis of genetic types, we developed a simple assay technique for determining the ratio of a specific target gene in the total genes that can be amplified with the same PCR primer. The key feature of this method is that the following two tasks are performed in a single-tube real-time PCR system: task 1, PCR amplification of the total genes including the target using a labeled PCR primer, with concurrent monitoring of the total copy number of the PCR product; task 2, detection of the signal of the target gene at each cycle of amplification, using a labeled nucleotide probe. In principle, the ratio of the target gene to the total genes is represented by the signal detected in 'task 2' at the cycle in which the PCR product reached a prescribed copy number (assessed by 'task 1').     

PrimerHunter: a primer design tool for PCR-based virus subtype identification

Rapid and reliable virus subtype identification is critical for accurate diagnosis of human infections, effective response to epidemic outbreaks and global-scale surveillance of highly pathogenic viral subtypes such as avian influenza H5N1. The polymerase chain reaction (PCR) has become the method of choice for virus subtype identification. However, designing subtype-specific PCR primer pairs is a very challenging task: on one hand, selected primer pairs must result in robust amplification in the presence of a significant degree of sequence heterogeneity within subtypes, on the other, they must discriminate between the subtype of interest and closely related subtypes. In this article, we present a new tool, called PrimerHunter, that can be used to select highly sensitive and specific primers for virus subtyping. Our tool takes as input sets of both target and nontarget sequences. Primers are selected such that they efficiently amplify any one of the target sequences, and none of the nontarget sequences. PrimerHunter ensures the desired amplification properties by using accurate estimates of melting temperature with mismatches, computed based on the nearest neighbor model via an efficient fractional programming algorithm. Validation experiments with three avian influenza HA subtypes confirm that primers selected by PrimerHunter have high sensitivity and specificity for target sequences.     

痘病毒科不同病毒属特异的PCR检测方法的建立

目的:建立可准确、快速地鉴别诊断可感染人的不同属痘病毒的特异PCR方法。方法:设计针对正痘病毒属、副痘病毒属和传染性软疣病毒属的多对特异引物,并制备相应的DNA模板,针对不同的模板优化引物与反应条件,分别进行检测筛选,建立病毒属特异的单独与多重PCR方法。结果:单一模板的PCR扩增反应中,正痘病毒的检测敏感性可达101拷贝/μL(引物为OPEaL-F1880/OPEaL-R2057),副痘病毒的检测敏感性可达101拷贝/μL(引物为PP2/PP3),传染性软疣病毒的检测敏感性为100 pg/μL体系(引物为MCV1/MCV2);混合模板的PCR扩增反应中,各属特异的引物均可获得预期大小的特异片段。结论:我们建立的PCR诊断方法,可用于痘病毒科不同病毒属感染的实验室特异快速鉴别诊断。     

Detection and enumeration of aromatic oxygenase genes by multiplex and real-time PCR

Our abilities to detect and enumerate pollutant-biodegrading microorganisms in the environment are rapidly advancing with the development of molecular genetic techniques. Techniques based on multiplex and real-time PCR amplification of aromatic oxygenase genes were developed to detect and quantify aromatic catabolic pathways, respectively. PCR primer sets were identified for the large subunits of aromatic oxygenases from alignments of known gene sequences and tested with genetically well-characterized strains. In all, primer sets which allowed amplification of naphthalene dioxygenase, biphenyl dioxygenase, toluene dioxygenase, xylene monooxygenase, phenol monooxygenase, and ring-hydroxylating toluene monooxygenase genes were identified. For each primer set, the length of the observed amplification product matched the length predicted from published sequences, and specificity was confirmed by hybridization. Primer sets were grouped according to the annealing temperature for multiplex PCR permitting simultaneous detection of various genotypes responsible for aromatic hydrocarbon biodegradation. Real-time PCR using SYBR green I was employed with the individual primer sets to determine the gene copy number. Optimum polymerization temperatures for real-time PCR were determined on the basis of the observed melting temperatures of the desired products. When a polymerization temperature of 4 to 5 degrees C below the melting temperature was used, background fluorescence signals were greatly reduced, allowing detection limits of 2 x 10(2) copies per reaction mixture. Improved in situ microbial characterization will provide more accurate assessment of pollutant biodegradation, enhance studies of the ecology of contaminated sites, and facilitate assessment of the impact of remediation technologies on indigenous microbial populations.     

Group-specific polymerase chain reaction for DNA-based analysis of species diversity and identity in dietary samples

Unique DNA sequences are present in all species and can be used as biomarkers for the detection of cells from that species. These DNA sequences can most easily be detected using the polymerase chain reaction (PCR), which allows very small quantities of target DNA sequence to be amplified even when the target is mixed with large amounts of nontarget DNA. PCR amplification of DNA markers that are present in a wide range of species has proven very useful for studies of species diversity in environmental samples. The taxonomic range of species to be identified from environmental samples may often need to be restricted to simplify downstream analyses and to ensure that less abundant sequences are amplified. Group-specific PCR primer sets are one means of specifying the range of taxa that produce an amplicon in a PCR. We have developed a range of group-specific PCR primers for studying the prey diversity found in predator stomach contents and scats. These primers, their design and their application to studying prey diversity and identity in predator diet are described.     

转水稻粗缩病毒运动蛋白缺陷型基因玉米的二重PCR检测研究

本研究以外源基因（RDV MP-）和玉米内源基因Zein作为PCR扩增对象,旨在建立一种简便有效的转基因玉米及其产品的二重PCR检测技术。转外源基因（RDV MP-）材料的常规PCR检测结果证明外源基因在转基因材料中可稳定遗传;对常规PCR检测的阴性结果材料进行二重PCR检测,扩增结果除进一步证实常规PCR检测的阴性结果结论外,还证明提取的植物总DNA质量符合试验要求,进而从二重PCR检测结果还得出常规PCR检测的阴性结果出错率为1.4%。此方法简单,实用,结果可靠,可适用于转基因植物及产品的检测。     

Review and re-analysis of domain-specific 16S primers

The Polymerase Chain Reaction (PCR) has facilitated the detection of unculturable microorganisms in virtually any environmental source and has thus been used extensively in the assessment of environmental microbial diversity. This technique relies on the assumption that the gene sequences present in the environment are complementary to the "universal" primers used in their amplification. The recent discovery of new taxa with 16S rDNA sequences not complementary to standard universal primers suggests that current 16S rDNA libraries are not representative of true prokaryotic biodiversity. Here we re-assess the specificity of commonly used 16S rRNA gene primers and present these data in tabular form designed as a tool to aid simple analysis, selection and implementation. In addition, we present two new primer pairs specifically designed for effective "universal" Archaeal 16S rDNA sequence amplification. These primers are found to amplify sequences from Crenarchaeote and Euryarchaeote type strains and environmental DNA.