Type IIE and IIF restriction endonucleases interacting with two recognition sites in DNA

Recently, it was revealed that restriction endonucleases widely used in genetic engineering and molecular biology are diverse not only in DNA sequence specificities but also in mechanisms of their interaction with DNA. In the review type IIE and IIF restriction endonucleases which require the simultaneous interaction with two copies of their recognition sequence for effective hydrolysis of DNA are considered. Crystal structures of these enzymes and their complexes with DNA as well as stepwise interaction with DNA, mechanisms of catalysis and enzyme-mediated DNA looping are discussed. A novel type of DNA-protein recognition was found for type IIE endonucleases when two copies of the same DNA sequence specifically interact with two different amino acid sequences and two structural motifs located in one polypeptide chain.     

Simultaneous binding of three recognition sites is necessary for a concerted plasmid DNA cleavage by EcoRII restriction endonuclease

According to the current paradigm type IIE restriction endonucleases are homodimeric proteins that simultaneously bind to two recognition sites but cleave DNA at only one site per turnover: the other site acts as an allosteric locus, activating the enzyme to cleave DNA at the first. Structural and biochemical analysis of the archetypal type IIE restriction enzyme EcoRII suggests that it has three possible DNA binding interfaces enabling simultaneous binding of three recognition sites. To test if putative synapsis of three binding sites has any functional significance, we have studied EcoRII cleavage of plasmids containing a single, two and three recognition sites under both single turnover and steady state conditions. EcoRII displays distinct reaction patterns on different substrates: (i) it shows virtually no activity on a single site plasmid; (ii) it yields open-circular DNA form nicked at one strand as an obligatory intermediate acting on a two-site plasmid; (iii) it cleaves concertedly both DNA strands at a single site during a single turnover on a three site plasmid to yield linear DNA. Cognate oligonucleotide added in trans increases the reaction velocity and changes the reaction pattern for the EcoRII cleavage of one and two-site plasmids but has little effect on the three-site plasmid. Taken together the data indicate that EcoRII requires simultaneous binding of three rather than two recognition sites in cis to achieve concerted DNA cleavage at a single site. We show that the orthodox type IIP enzyme PspGI which is an isoschisomer of EcoRII, cleaves different plasmid substrates with equal rates. Data provided here indicate that type IIE restriction enzymes EcoRII and NaeI follow different mechanisms. We propose that other type IIE restriction enzymes may employ the mechanism suggested here for EcoRII.     

Diversity of type II restriction endonucleases that require two DNA recognition sites

Orthodox Type IIP restriction endonucleases, which are commonly used in molecular biological work, recognize a single palindromic DNA recognition sequence and cleave within or near this sequence. Several new studies have reported on structural and biochemical peculiarities of restriction endonucleases that differ from the orthodox in that they require two copies of a particular DNA recognition sequence to cleave the DNA. These two sites requiring restriction endonucleases belong to different subtypes of Type II restriction endonucleases, namely Types IIE, IIF and IIS. We compare enzymes of these three types with regard to their DNA recognition and cleavage properties. The simultaneous recognition of two identical DNA sites by these restriction endonucleases ensures that single unmethylated recognition sites do not lead to chromosomal DNA cleavage, and might reflect evolutionary connections to other DNA processing proteins that specifically function with two sites.     

Reassortment of DNA recognition domains and the evolution of new specificities

Type I restriction enzymes comprise three subunits only one of which, the S polypeptide, dictates the specificity of the DNA sequence recognized. Recombination between two different hsdS genes, SP and SB, led to the isolation of a system, SQ, which had a different specificity from that of either parent. The finding that the nucleotide sequence recognized by SQ is a hybrid containing components from both the SP and SB target sequences suggested that DNA recognition is carried out by two separable domains within each specificity polypeptide. To test this we have made the recombinant gene of reciprocal structure and demonstrate that it encodes a polypeptide whose recognition sequence, deduced In vivo, is as predicted by this model. We also report the sequence of the SB specificity gene, so that information is now available for the five known members of this family of enzymes. Ali show a similar organization of conserved and variable regions. Comparisons of the predicted amino acid sequences reveal large non-conserved areas which may not even be structurally similar. This is remarkable since these different S subunits are functionally identical, except for the specificity with respect to the DNA sequence with which they interact. We discuss the correlation of the variation in polypeptide sequence with recognition specificities.     

Reassortment of DNA recognition domains and the evolution of new specificities

Type I restriction enzymes comprise three subunits only one of which, the S polypeptide, dictates the specificity of the DNA sequence recognized. Recombination between two different hsdS genes, SP and SB, led to the isolation of a system, SQ, which had a different specificity from that of either parent. The finding that the nucleotide sequence recognized by SQ is a hybrid containing components from both the SP and SB target sequences suggested that DNA recognition is carried out by two separable domains within each specificity polypeptide. To test this we have made the recombinant gene of reciprocal structure and demonstrate that it encodes a polypeptide whose recognition sequence, deduced in vivo, is as predicted by this model. We also report the sequence of the SB specificity gene, so that information is now available for the five known members of this family of enzymes. All show a similar organization of conserved and variable regions. Comparisons of the predicted amino acid sequences reveal large non-conserved areas which may not even be structurally similar. This is remarkable since these different S subunits are functionally identical, except for the specificity with respect to the DNA sequence with which they interact. We discuss the correlation of the variation in polypeptide sequence with recognition specificities.     

Restriction endonucleases: natural and directed evolution

Type II restriction endonucleases (REs) are highly sequence-specific compared with other classes of nucleases. PD-(D/E)XK nucleases, initially represented by only type II REs, now comprise a large and extremely diverse superfamily of proteins and, although sharing a structurally conserved core, typically display little or no detectable sequence similarity except for the active site motifs. Sequence similarity can only be observed in methylases and few isoschizomers. As a consequence, REs are classified according to combinations of functional properties rather than on the basis of genetic relatedness. New alignment matrices and classification systems based on structural core connectivity and cleavage mechanisms have been developed to characterize new REs and related proteins. REs recognizing more than 300 distinct specificities have been identified in RE database (REBASE: ) but still the need for newer specificities is increasing due to the advancement in molecular biology and applications. The enzymes have undergone constant evolution through structural changes in protein scaffolds which include random mutations, homologous recombinations, insertions, and deletions of coding DNA sequences but rational mutagenesis or directed evolution delivers protein variants with new functions in accordance with defined biochemical or environmental pressures. Redesigning through random mutation, addition or deletion of amino acids, methylation-based selection, synthetic molecules, combining recognition and cleavage domains from different enzymes, or combination with domains of additional functions change the cleavage specificity or substrate preference and stability. There is a growing number of patents awarded for the creation of engineered REs with new and enhanced properties.     

The nucleotide sequence of cloned wheat dwarf virus DNA

Restriction analysis and cloning of virus-specific double-stranded DNA isolated from plants infected with wheat dwarf virus (WDV) indicated that the virus genome, like that of maize streak virus (MSV), consists of a single DNA circle. The complete nucleotide sequence of cloned WDV DNA (2749 nucleotides) has been determined. Comparison of the potential coding regions in WDV DNA with those in the DNA of two strains of MSV suggests that these viruses encode at least two functional proteins, the coat protein read in the virion (+) DNA sense and a composite protein, formed from two open reading regions, in the complementary (-) DNA sense. Although WDV and MSV are serologically unrelated their coat proteins showed 35% direct amino acid sequence and their DNAs showed 46% nucleotide sequence homology. There was too little homology between the DNAs of WDV and those of two geminiviruses with bipartite genomes, cassava latent virus (CLV) and tomato golden mosaic virus (TGMV), to align the sequences. However comparison of the amino acid sequences of predicted proteins of WDV, MSV, TGMV and CLV revealed clear relationships between these viruses and suggested that the monopartite and the bipartite geminiviruses have a common ancestral origin. Four inverted repeat sequences which have the potential to form hairpin structures of deltaG >/= -14 kcal/mol were detected in WDV DNA. The sequence TAATATTAC present in the loop of one of these hairpins is conserved in similar putative structures in MSV DNA and in both DNA components of CLV and TGMV and may function as a recognition sequence for a protein involved in virus DNA replication.     

Type III DNA restriction and modification systems EcoP1 and EcoP15. Nucleotide sequence of the EcoP1 operon, the EcoP15 mod gene and some EcoP1 mod mutants

This paper presents the nucleotide sequence of the mod-res operon of phage P1, which encodes the two structural genes for the EcoP1 type III restriction and modification system. We have also sequenced the mod gene of the allelic EcoP15 system. The mod gene product is responsible for binding the system-specific DNA recognition sequences in both restriction and modification; it also catalyses the modification reaction. A comparison of the two mod gene product sequences shows that they have conserved amino and carboxyl ends but have completely different sequences in the middle of the molecules. Two alleles of the EcoP1 mod gene that are defective in modification but not in restriction were also sequenced. The mutations in both alleles lie within the non-conserved regions.     

Two type I restriction enzymes from Salmonella species. Purification and DNA recognition sequences

We have purified the type I restriction enzymes SB and SP from Salmonella typhimurium and S. potsdam, respectively, and determined the DNA sequences that they recognize. These sequences resemble those previously determined for the type I enzymes, EcoB, EcoK and EcoA, in that the specific part of the sequence is divided into two domains by a spacer of non-specific sequence that has a fixed length for each enzyme. Two main differences from the previously determined sequences are seen. Both of the new sequences are degenerate and one of them, SB, has one trinucleotide and one pentanucleotide-specific domain rather than the trinucleotide and tetranucleotide domains seen for all of the other enzymes. The only conserved features of the recognition sequences are the adenosyl residues that are methylated in the modification reaction. For all of the enzymes these are situated ten or 11 base-pairs apart, one on each strand of the DNA. This suggests that the enzymes bind to DNA along one face of the double helix making protein-DNA interaction in two successive major grooves with most of the non-specific spacer sequence in the intervening minor groove.     

Interaction of a protooncogene product, Myb with DNAs.

The DNA-binding domain of Myb consists of three imperfect tandem repeats and the third one which is essential for sequence-specific binding was established to have a helix-turn-helix-related motif. DNA sequences recognized by Myb have been reported to contain TAACPy sequence. Here we have examined the details of Myb-binding sequence. Using DNAs with a single mutation on the various sites of two specific DNAs and some fragments of the DNA-binding domain of Myb, we have found that (i) in a specific DNA which contains only one AAC sequence, each AAC nucleotide is found to be essential for the specific binding of Myb, while any other mutations cause no serious binding loss, (ii) in a specific DNA which contains two AAC sequences separately, one AAC is not so important in the binding, and (iii) for the specific binding with DNA, at least both repeats 2 and 3 of Myb are required. These findings suggest that repeat 3 containing a helix-turn-helix-related structure recognizes the core AAC sequence and repeat 2 supports this recognition by interactions with phosphate groups of DNA.     

A prediction of the amino acids and structures involved in DNA recognition by type I DNA restriction and modification enzymes.

The S subunits of type I DNA restriction/modification enzymes are responsible for recognising the DNA target sequence for the enzyme. They contain two domains of approximately 150 amino acids, each of which is responsible for recognising one half of the bipartite asymmetric target. In the absence of any known tertiary structure for type I enzymes or recognisable DNA recognition motifs in the highly variable amino acid sequences of the S subunits, it has previously not been possible to predict which amino acids are responsible for sequence recognition. Using a combination of sequence alignment and secondary structure prediction methods to analyse the sequences of S subunits, we predict that all of the 51 known target recognition domains (TRDs) have the same tertiary structure. Furthermore, this structure is similar to the structure of the TRD of the C5-cytosine methyltransferase, Hha I, which recognises its DNA target via interactions with two short polypeptide loops and a beta strand. Our results predict the location of these sequence recognition structures within the TRDs of all type I S subunits.     

Genomic organization of the canrep repetitive DNA in Brassica juncea

Canrep is a heterogeneous, tandemly repeated, 176 bp nucleotide sequence that contains a single Hind III site and is present in high copy numbers in the genomes of many Brassica species. Complete clusters of repeats of this DNA were cloned from the nuclear DNA of Brassica juncea. Restriction-fragment dimers and higher multimers of the 176 bp sequence have arisen by mutations within the Hind III recognition sequence. Adjacent repeats from within the same cluster usually have different nucleotide sequences with features indicating that diversity is generated by a mechanism that causes site-specific base substitutions. While most of the units of canrep DNA are clustered in long arrays of tandem repeats, some are dispersed throughout the genome as isolated copies or in small clusters. Regardless of the size of the arrays, each cluster begins and ends with a variable-length, truncated repeat and is flanked by inverted copies of the sequence 5-ATCTCAT3-,which is not part of the basic sequence of the canrep family of DNAs. Furthermore, some clusters are located close to nucleotide sequences related to those of known plant transposons. Thus, canrep elements may be dispersed by transposition. There are two distinct subfamilies of canrep sequences in B. juncea, and one of these is closely related to one of the two subfamilies of this type of DNA from B. napus, indicating that it originated from B. campestris, the common diploid ancestor of both amphidiploid species. Neither the repetitive DNA nor nucleotide sequences flanking canrep clusters are transcribed in seedlings, suggesting that even small arrays of repeats are located in heterochromatic regions and might be involved in chromatin condensation and/or chromosome segregation.     

A sequence-specific endonuclease (Xmn I) from Xanthomonas manihotis.

A type II restriction endonuclease Xmn I with a novel site specificity has been isolated from Xanthomonas manihotis. Xmn I does not cleave SV40 DNA, but cleaves phi X174 DNA into three fragments, which constitute 76.61%, 18.08% and 5.31% of the total length of 5386 base pairs, and cleaves pBR322 DNA into two fragments of 55.71% and 44.29% of the entire 4362 base pairs. The nucleotide sequences around the cleavage sites made by Xmn I are not exactly homologous, but they have a common sequence of 5' GAANNNNTTC 3' according to a simple computer program analysis on nucleotide sequences of phi X174 DNA, pBR322 DNA and SV40 DNA. The results suggest that the cleavage site of Xmn I is located within its recognition sequence of 5' GAANNNNTTC 3'.     

Many type IIs restriction endonucleases interact with two recognition sites before cleaving DNA.

Type IIs restriction endonucleases recognize asymmetric DNA sequences and cleave both DNA strands at fixed positions, typically several base pairs away from the recognition site. These enzymes are generally monomers that transiently associate to form dimers to cleave both strands. Their reactions could involve bridging interactions between two copies of their recognition sequence. To examine this possibility, several type IIs enzymes were tested against substrates with either one or two target sites. Some of the enzymes cleaved the DNA with two target sites at the same rate as that with one site, but most cut their two-site substrate more rapidly than the one-site DNA. In some cases, the two sites were cut sequentially, at rates that were equal to each other but that exceeded the rate on the one-site DNA. In another case, the DNA with two sites was cleaved rapidly at one site, but the residual site was cleaved at a much slower rate. In a further example, the two sites were cleaved concertedly to give directly the final products cut at both sites. Many type IIs enzymes thus interact with two copies of their recognition sequence before cleaving DNA, although via several different mechanisms.     

Evolutionary relationship between different subgroups of restriction endonucleases

The type II restriction endonuclease SsoII shows sequence similarity with 10 other restriction endonucleases, among them the type IIE restriction endonuclease EcoRII, which requires binding to an effector site for efficient DNA cleavage, and the type IIF restriction endonuclease NgoMIV, which is active as a homotetramer and cleaves DNA with two recognition sites in a concerted reaction. We show here that SsoII is an orthodox type II enzyme, which is active as a homodimer and does not require activation by binding to an effector site. Nevertheless, it shares with EcoRII and NgoMIV a very similar DNA-binding site and catalytic center as shown here by a mutational analysis, indicative of an evolutionary relationship between these three enzymes. We suggest that a similar relationship exists between other orthodox type II, type IIE, and type IIF restriction endonucleases. This may explain why similarities may be more pronounced between members of different subtypes of restriction enzymes than among the members of a given subtype.     

Time-resolved fluorescence studies of nucleotide flipping by restriction enzymes

Restriction enzymes Ecl18kI, PspGI and EcoRII-C, specific for interrupted 5-bp target sequences, flip the central base pair of these sequences into their protein pockets to facilitate sequence recognition and adjust the DNA cleavage pattern. We have used time-resolved fluorescence spectroscopy of 2-aminopurine-labelled DNA in complex with each of these enzymes in solution to explore the nucleotide flipping mechanism and to obtain a detailed picture of the molecular environment of the extrahelical bases. We also report the first study of the 7-bp cutter, PfoI, whose recognition sequence (T/CCNGGA) overlaps with that of the Ecl18kI-type enzymes, and for which the crystal structure is unknown. The time-resolved fluorescence experiments reveal that PfoI also uses base flipping as part of its DNA recognition mechanism and that the extrahelical bases are captured by PfoI in binding pockets whose structures are quite different to those of the structurally characterized enzymes Ecl18kI, PspGI and EcoRII-C. The fluorescence decay parameters of all the enzyme-DNA complexes are interpreted to provide insight into the mechanisms used by these four restriction enzymes to flip and recognize bases and the relationship between nucleotide flipping and DNA cleavage.