Assignment of the disulfide bonds of huwentoxin-II by Edman degradation sequencing and stepwise thiol modification.

A novel strategy combining Edman degradation and thiol modification was developed to assign the three disulfides of huwentoxin-II (HWTX-II), an insecticidal peptide purified from the venom of the spider Selenocosmia huwena. Phenylthiohydantoin (Pth) derivatives of Cys and the elimination product, dehydroalanine (DeltaSer), can be observed in the Cys cycles during Edman degradation of native HWTX-II. The appearance of two products indicates that the disulfides of HWTX-II were split and that the free thiol group of the second half cystine has been generated. Information about the nature of the disulfide bridges of HWTX-II could be obtained from the sequencing signal if the nascent thiols were modified stepwise by 4-vinylpyridine. Using this method the disulfide bridges of HWTX-II were assigned as Cys4-Cys18, Cys8-Cys29 and Cys23-Cys34, which is different from that seen in HWTX-I, a neurotoxic peptide from the same spider. Using this strategy, one can assign the disulfide bonds of small proteins by sequencing and modification n - 1 times, where n is the number of disulfide bonds in the protein. The above assignment of the disulfide bonds of HWTX-II was confirmed by MALDI-TOF MS of tryptic fragments of HWTX-II. Some disulfide interchanging during proteolysis was observed by monitoring the kinetics of proteolysis of HWTX-II by MALDI-TOF MS.     

Disulfide structure of the pheromone binding protein from the silkworm moth, Bombyx mori

Disulfide bond formation is the only known posttranslational modification of insect pheromone binding proteins (PBPs). In the PBPs from moths (Lepidoptera), six cysteine residues are highly conserved at positions 19, 50, 54, 97, 108 and 117, but to date nothing is known about their respective linkage or redox status. We used a multiple approach of enzymatic digestion, chemical cleavage, partial reduction with Tris-(2-carboxyethyl)phosphine, followed by digestion with endoproteinase Lys-C to determine the disulfide connectivity in the PBP from Bombyx mori (BmPBP). Identification of the reaction products by on-line liquid chromatography-electrospray ionization mass spectrometry (LC/ESI-MS) and protein sequencing supported the assignment of disulfide bridges at Cys-19-Cys-54, Cys-50-Cys-108 and Cys-97-Cys-117. The disulfide linkages were identical in the protein obtained by periplasmic expression in Escherichia coli and in the native BmPBP.     

Amino acid sequence of protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25

The amino acid sequence of a protein alpha-amylase inhibitor from Streptomyces griseosporeus YM-25 (Haim II), which consists of 77 amino acid residues, including two disulfide bridges, was determined by conventional methods. One of the disulfide bridges was found to be located between Cys(6) and Cys(22), and the other between Cys(40) and Cys(67) from the results of structure analyses of the two cystine-containing peptides obtained from the thermolysin digest of the native inhibitor.     

Kiwi protein inhibitor of pectin methylesterase amino-acid sequence and structural importance of two disulfide bridges.

A protein acting as a powerful inhibitor of plant pectin methylesterase was isolated from kiwi (Actinidia chinensis) fruit. The complete amino-acid sequence of the pectin methylesterase inhibitor (PMEI) was determined by direct protein analysis. The sequence comprises 152 amino-acid residues, accounting for a molecular mass of 16 277 Da. The far-UV CD spectrum indicated a predominant alpha-helix conformation in the secondary structure. The protein has five cysteine residues but neither tryptophan nor methionine. Analysis of fragments obtained after digestion of the protein alkylated without previous reduction identified two disulfide bridges connecting Cys9 with Cys18, and Cys74 with Cys114; Cys140 bears a free thiol group. A database search pointed out a similarity between PMEI and plant invertase inhibitors. In particular, the four Cys residues, which in PMEI are involved in the disulfide bridges, are conserved. This allows us to infer that also in the homologous proteins, whose primary structure was deduced only by cDNA sequencing, those cysteine residues are engaged in two disulfide bridges, and constitute a common structural motif. The comparison of the sequence of these inhibitors confirms the existence of a novel class of proteins with moderate but significant sequence conservation, comprising plant proteins acting as inhibitors of sugar metabolism enzymes, and probably involved in various steps of plant development.     

Total solution synthesis of human epidermal growth factor (h-EGF) by the assembly of nine building blocks.

Human epidermal growth factor (h-EGF) composed of 53 amino acids bearing three intramolecular disulfide bridges was synthesized by the maximum protecting solution method. The synthetic h-EGF coincided with recombinant h-EGF by reverse-phase HPLC, and the sites of three intramolecular disulfide bridges were ascertained by a thermolytic digestion. The synthetic h-EGF possessed m/z 6215.7 in its FAB-MS as expected, and exhibited compatible mitogenic activity.     

Amino acid sequence of Streptomyces metallo-proteinase inhibitor from Streptomyces nigrescens TK-23

Streptomyces Metallo-Proteinase Inhibitor (S-MPI) consists of 102 amino acid residues, including one methionine and two disulfide bridges. The complete amino acid sequence of S-MPI, including two disulfide bridges, was determined by sequencing of tryptic and chymotryptic peptides of two fragments obtained by cyanogen bromide cleavage followed by reduction and S-pyridylethylation of the protein. Incubation of the inhibitor with thermolysin slowly cleaved one peptide bond, Cys(64)-Val(65), which might be a reactive site of S-MPI.     

Disulfide bridges in tomato pectinesterase: variations from pectinesterases of other species; conservation of possible active site segments.

Analysis of tomato pectinesterase by carboxymethylation, with and without reduction, shows that the enzyme has two intrachain disulfide bridges. Analysis of fragments obtained from the native enzyme after digestion with pepsin identified bridges connecting Cys-98 with Cys-125, and Cys-166 with Cys-200. The locations of disulfide bridges in tomato pectinesterase are not identical to those in three distantly related pectinesterases (18-33% residue identities) from microorganisms. However, one half-Cys (i.e., Cys-166) position is conserved in all four enzymes. Sequence comparisons of the overall structures suggest a special importance for three short segments of the entire protein. One segment is at the N-terminal part of the tomato pectinesterase, another in the C-terminal portion near the distal end of the second disulfide loop, and the third segment is located in the central part between the two disulfide bridges. The latter segment, encompassing only 40 residues of the entire protein, appears to high-light a functional site in a midchain segment.     

Complete primary structure of bovine beta 2-glycoprotein I: localization of the disulfide bridges.

The complete primary structure of bovine beta 2-glycoprotein I was determined by a combination of cDNA and peptide sequencing. Bovine beta 2-glycoprotein I was purified from citrated plasma, and by sequencing selected peptides, the complete disulfide bridge patterns of the 11 disulfide bridges were established as well as the positions of the five asparagine-linked carbohydrate groups. Bovine beta 2-glycoprotein I comprises five mutually homologous domains or Short Consensus Repeats, each containing two disulfide bridges, except for the fifth most C-terminal domain which diverges from the Short Consensus Repeat consensus by containing an additional disulfide bridge. In the four N-terminal domains, the first and third and the second and fourth half-cystines are disulfide-linked, while in the fifth domain the first and fourth, the second and fifth, and the third and sixth half-cystines are disulfide-linked.     

Total Solution Synthesis of Human Epidermal Growth Factor (h-EGF) by the Assembly of Nine Building Blocks

Human epidermal growth factor (h-EGF) composed of 53 amino acids bearing three intramolecular disulfide bridges was synthesized by the maximum protecting solution method. The synthetic h-EGF coincided with recombinant h-EGF by reverse-phase HPLC, and the sites of three intramolecular disulfide bridges were ascertained by a thermolytic digestion. The synthetic h-EGF possessed m/z 6215.7 in its FAB-MS as expected, and exhibited compatible mitogenic activity.     

NMR structure of the Euplotes raikovi pheromone Er-23 and identification of its five disulfide bonds.

The NMR solution structure of the 51 residue pheromone Er-23 from the ciliated protozoan Euplotes raikovi (Er) was calculated with the torsion angle dynamics program DYANA from 582 nuclear Overhauser enhancement (NOE) upper limit distance constraints, 46 dihedral angle constraints and 30 disulfide bond constraints. The disulfide bridges had not been assigned by chemical methods, and initially were assigned tentatively on the basis of inspection of the positioning of the Cys sulfhydryl groups in a bundle of 20 conformers that was calculated without disulfide bond constraints. The assignment of disulfide bridges was then validated by structure calculations that assessed the compatibility of plausible alternative Cys-Cys disulfide combinations with the input of NOE upper distance constraints and dihedral angle constraints. For a group of 20 conformers used to characterize the solution structure, the average pairwise root-mean-square distances from the mean coordinates calculated for the backbone heavy atoms N, C(alpha) and C' of resideus 1-51 is 0.38 A. The molecular architecture consists of a three-dimensional arrangement of five helices comprised of residues 2-8, 14-17, 26-29, 34-36 and 38-47, with five disulfide bridges in the positions 3-24, 6-16, 13-47, 27-40, and 35-51, which has so far not been represented in the Protein Data Bank. Er-23 is unique among presently known Er-pheromones with respect to size, sequence, the number of disulfide bonds and the three-dimensional structure, thus providing a new structural basis for rationalizing the physiological functions of this protein family.     

Complete amino acid sequence of the Aspergillus cytotoxin mitogillin

The complete amino acid sequence of the cytotoxin mitogillin has been determined by sequencing the intact chain and peptide fragments produced by cleavage at methionyl, arginyl, lysyl, and tryptophanyl residues and at one aspartic acid-proline bond. The protein consists of 149 amino acid residues with alanine at the NH2 terminus and histidine at the COOH terminus. The calculated Mr of the native mitogillin was 16 867. The native molecule presents two disulfide bridges, one between cysteine residues at positions 5 and 147 and another one between cysteine residues at positions 75 and 131. The amino acid sequence of mitogillin shows 86% homology with another cytotoxic protein called alpha-sarcin.     

Characterization of an alternative low energy fold for bovine α-lactalbumin formed by disulfide bond shuffling

Bovine α-lactalbumin (αLA) forms a misfolded disulfide bond shuffled isomer, X-αLA. This X-αLA isomer contains two native disulfide bridges (Cys 6-Cys 120 and Cys 28-Cys 111) and two non-native disulfide bridges (Cys 61-Cys 73 and Cys 77-Cys 91). MD simulations have been used to characterize the X-αLA isomer and its formation via disulfide bond shuffling and to compare it with the native fold of αLA. In the simulations of the X-αLA isomer the structure of the α-domain of native αLA is largely retained in agreement with experimental data. However, there are significant rearrangements in the β-domain, including the loss of the native β-sheet and calcium binding site. Interestingly, the energies of X-αLA and native αLA in simulations in the absence of calcium are closely similar. Thus, the X-αLA isomer represents a different low energy fold for the protein. Calcium binding to native αLA is shown to help preserve the structure of the β-domain of the protein limiting possibilities for disulfide bond shuffling. Hence, binding calcium plays an important role in both maintaining the native structure of αLA and providing a mechanism for distinguishing between folded and misfolded species.     

Topology of the disulfide bonds in the antiviral lectin scytovirin

The antiviral lectin scytovirin (SVN) contains a total of five disulfide bonds in two structurally similar domains. Previous reports provided contradictory results on the disulfide pairing in each individual domain, and we have now re‐examined the disulfide topology. N‐terminal sequencing and mass spectrometry were used to analyze proteolytic fragments of native SVN obtained at acidic pH, yielding the assignment as Cys7–Cys55, Cys20–Cys32, Cys26–Cys38, Cys68–Cys80, and Cys74–Cys86. We also analyzed the N‐terminal domain of SVN (SD1, residues 1–48) prepared by expression/oxidative folding of the recombinant protein and by chemical synthesis. The disulfide pairing in the chemically synthesized SD1 was forced into predetermined topologies: SD1A (Cys20–Cys26, Cys32–Cys38) or SD1B (Cys20–Cys32, Cys26–Cys38). The topology of native SVN was found to be in agreement with the SD1B and the one determined for the recombinant SD1 domain. Although the two synthetic forms of SD1 were distinct when subjected to chromatography, their antiviral properties were indistinguishable, having low nM activity against HIV. Tryptic fragments, the “cystine clusters” [Cys20–Cys32/Cys26–Cys38; SD1] and [Cys68–Cys80/Cys74–C‐86; SD2], were found to undergo rapid disulfide interchange at pH 8. This interchange resulted in accumulation of artifactual fragments in alkaline pH digests that are structurally unrelated to the original topology, providing a rational explanation for the differences between the topology reported herein and the one reported earlier (Bokesh et al., Biochemistry 2003;42:2578–2584). Our observations emphasize the fact that proteins such as SVN, with disulfide bonds in close proximity, require considerable precautions when being fragmented for the purpose of disulfide assignment.     

Disulfide exchange folding of insulin-like growth factor I.

The disulfide exchange folding properties of insulin-like growth factor I (IGF-I) have been analyzed in a redox buffer containing reduced (10 mM) and oxidized (1 mM) glutathione. Under these conditions, the 3 disulfide bridges of the 70 amino acid peptide were not quantitatively formed. Instead, five major forms of IGF-I were detected, and these components were concluded to be in equilibrium as their relative amounts were similar starting from either reduced, native, or a mismatched variant of IGF-I containing two non-native disulfides. The different components in the mixtures were trapped by thiol alkylation using vinylpyridine and subsequently isolated by reverse-phase HPLC. The purified variants were further characterized using plasma desorption mass spectrometry and peptide mapping. Two of the five different forms were identified as native and mismatched IGF-I. One form was a variant with only one disulfide bond, and the other two major components had two disulfides formed. In a separate experiment, early refolding intermediates were trapped by pyridylethylation after only 90 s of refolding in the glutathione buffer, starting from reduced IGF-I. The intermediates were identical to the components observed at equilibrium, but at different relative concentrations. On the basis of the disulfide bond patterns of the different components in the equilibrium mixtures, we conclude that the disulfide between cysteines-47 and -52 in IGF-I is an unfavorable high-energy bond that may exist in the native molecule in a strained configuration.     

Characterization of a recombinant murine interleukin-6: assignment of disulfide bonds

Murine interleukin 6 (mIL-6) has been synthesized as a fusion protein using a lac operon inducible plasmid in Escherichia coli. The first 8 amino acids are from the N-terminus of bacterial beta-galactosidase and the last 175 amino acids are from residue number 12 to the end of native mIL-6. This fusion protein is equipotent with the native molecule in the hybridoma growth factor assay and has comparable receptor binding characteristics. The two disulfide bridges in mIL-6 have been identified by Staphylococcus aureus V8 protease peptide mapping and Edman degradation of cystine-containing peptides. It has been shown that there are disulfide bonds between Cys46-Cys52 and Cys75-Cys85.     

The disulfide structure of mouse lysosome-associated membrane protein 1

The disulfide structure of mouse lysosome-associated membrane protein 1 has been determined by reverse-phase isolation and sequence analysis of the cysteine-containing tryptic fragments of the reduced and non-reduced deglycosylated protein. Half-cystines were distinguished (a) by their localization within tryptic or chymotryptic peptides that formed reverse-phase peaks unique to the reduced digests and (b) by their 3H-carboxymethylation only after reduction of the protein. The disulfide arrangement of the cysteines was assigned after isolation of disulfide-linked peptide pairs. Each pair chromatographed as a peak present in the nonreduced (but not the corresponding reduced) tryptic digest. NH2-terminal sequencing as well as reduction, alkylation, and rechromatography of the disulfide-linked fragments led to the following assignment of disulfide bonds: Cys11 and Cys50, Cys125 and Cys161, Cys198 and Cys235, and Cys303 and Cys340. This structure creates four 36-38-residue loops that are symmetrically placed within the two halves of the protein's intraluminal domain. The loops formed by the Cys11-Cys50 and Cys198-Cys235 bridges are homologous, and the Cys125-Cys161 and Cys303-cys340 loops form a second set of homologous domains. The conservation of cysteine residues among lysosome-associated membrane proteins 1 and 2 suggests that this disulfide arrangement is common to both members of this family of lysosomal membrane glycoproteins.     

Use of recombinant DNA derived human relaxin to probe the structure of the native protein

This report describes the physical, chemical, and biological characterization of recombinant human relaxin (rhRlx) used as a probe to establish the disulfide pairing in native human relaxin. This strategy is necessary since native human relaxin is only available in the nanogram range. The relaxin molecule is composed of two nonidentical peptide chains, an A-chain 24 amino acids in length and a B-chain of 29 amino acids, linked by two disulfide bridges with an additional disulfide linkage in the A-chain. Native relaxin isolated from human corpora lutea was compared to rhRlx by reversed-phase chromatography, partial sequence analysis, mass spectroscopy, and bioassay. The potency of rhRlx was established by its ability to stimulate cAMP from primary human uterine endometrial cells. Native relaxin isolated from human corpora lutea was equipotent to chemically synthesized relaxin, which in turn was equipotent to rhRlx. A tryptic map was developed for rhRlx to confirm the complete amino acid sequence and assignment of the disulfide bonds. The three disulfide bonds (CysA10-CysA15, CysA11-CysB11, and CysA24-CysB23) were assigned by mass spectrometric analysis of the tryptic peptides and by comparison to chemically synthesized peptides disulfide linked in the two most probable configurations. In addition, the observed amino acid composition and sequence of rhRlx was in agreement with that predicted from the cDNA sequence with the exception that the A-chain amino terminal was pyroglutamic acid. The migration of rhRlx upon sodium dodecyl sulfate-polyacrylamide gel electrophoresis was consistent with a monomeric structure, and the identity of the band was demonstrated by immunoblotting.     

Disulfide bridges in interleukin-8 probed using non-natural disulfide analogues: dissociation of roles in structure from function.

The structural and functional roles of the two disulfide bridges in interleukin-8 (IL-8) were addressed using IL-8 analogues with covalently modified disulfide bridges. The analogues were prepared using chemical synthesis by replacement of a cysteine for either homocysteine, penicillamine, or selenocysteine and on folding resulted in a covalently modified disulfide. Deletion of either of the two disulfide bridges by replacement of either cysteine pair with alanine resulted in loss of both structure and function. In contrast, all of the analogues with modified disulfide bridges had native tertiary fold as determined by nuclear magnetic resonance spectroscopic methods. Their structural similarity provided a rational basis for assessing the functional effects of the changes to the disulfide. Modification to the disulfide bridge between cysteines 9 and 50 had only a modest effect on IL-8 function. In contrast, alterations to the 7-34 disulfide bridge resulted in a dramatic reduction in biological potency. Thus, although both disulfide bridges are required for maintenance of the native tertiary fold, their role in determining IL-8 activity is distinct. We propose that 7-34 disulfide has a direct role in determining receptor binding and activation, whereas the 9-50 was not directly involved. The synthesis of non-natural disulfide analogues is a novel general approach to structure-activity relationships of disulfide bridges. The demonstration that the participation of disulfide bridges in function can be dissociated from their effects on the stability of the tertiary structure suggests that this method will lead to increased understanding of the roles of disulfide bridges in proteins.     

A major kinetic trap for the oxidative folding of human epidermal growth factor

The folding pathway of human epidermal growth factor (EGF) has been characterized by structural and kinetic analysis of the acid-trapped folding intermediates. Oxidative folding of the fully reduced EGF proceeds through 1-disulfide intermediates and accumulates rapidly as a single stable 2-disulfide intermediate (designated as EGF-II), which represents up to more than 85% of the total protein along the folding pathway. Among the five 1-disulfide intermediates that have been structurally characterized, only one is native, and nearly all of them are bridges by neighboring cysteines. Extensive accumulation of EGF-II indicates that it accounts for the major kinetic trap of EGF folding. EGF-II contains two of the three native disulfide bonds of EGF, Cys(14)-Cys(31) and Cys(33)-Cys(42). However, formation of the third native disulfide (Cys(6)-Cys(20)) for EGF-II is slow and does not occur directly. Kinetic analysis reveals that an important route for EGF-II to reach the native structure is via rearrangement pathway through 3-disulfide scrambled isomers. The pathway of EGF-II to attain the native structure differs from that of three major 2-disulfide intermediates of bovine pancreatic trypsin inhibitor (BPTI). The dissimilarities of folding mechanism(s) between EGF, BPTI, and hirudin are discussed in this paper.     

Structure of human lysosomal membrane glycoprotein 1. Assignment of disulfide bonds and visualization of its domain arrangement

The amino acid sequence of one of the major lysosomal membrane glycoproteins, lysosome-associated membrane protein 1 (lamp-1), was deduced from its cDNA sequence (Fukuda, M., Viitala, J., Matteson, J., and Carlsson, S. R. (1988) J. Biol. Chem. 263, 18920-18928). This amino acid sequence suggests that lamp-1 contains a hinge-like structure and could form disulfide bridges that are observed in the immunoglobulin superfamily. To test this possibility, we have determined the positions of the disulfide bridges by isolating and sequencing cystine-containing peptides which contain disulfide bridges. The results indicate that disulfide arrangement of lamp-1 is different from that of immunoglobulins. Each molecule contains, in total, four loops formed by disulfide bonds, and each loop contains 36-39 amino acid residues. However, none of the disulfide bonds connects two domains that are separated by a hinge-like structure. The results indicate that the hinge region has no ordered structure, and the relative positions of the two domains can be altered in space. Examination of the ultrastructure of lamp-1 by electron microscopy showed that the hinge-like structure actually functions as a hinge. These results indicate that the lamp-1 molecule represents a novel family of glycoproteins with unique structural properties.